Salt,Shake, Fuse—Giant Hybrid Polymer/Lipid Vesicles through Mechanically Activated Fusion

Large (200 nm) poly(ethylene oxide)‐b‐poly(butadiene) polymer vesicles fuse into giant (>1 μm) vesicles with mild agitation in dilute aqueous NaCl solutions. This unusual effect is attributed to the salt‐induced contraction of the poly(ethylene oxide) corona, reducing steric resistance between vesicles and, with agitation, increasing the probability of contact between the hydrophobic cores of adjacent membranes. In addition, NaCl and agitation facilitated the creation of giant hybrid vesicles from much smaller homogeneous polymersomes and liposomes. Whereas lipid vesicles do not readily fuse with each other under the same circumstances, they did fuse with polymersomes to produce hybrid polymer/lipid vesicles.     

Salt,Shake, Fuse—Giant Hybrid Polymer/Lipid Vesicles through Mechanically Activated Fusion

Large (200 nm) poly(ethylene oxide)‐b‐poly(butadiene) polymer vesicles fuse into giant (>1 μm) vesicles with mild agitation in dilute aqueous NaCl solutions. This unusual effect is attributed to the salt‐induced contraction of the poly(ethylene oxide) corona, reducing steric resistance between vesicles and, with agitation, increasing the probability of contact between the hydrophobic cores of adjacent membranes. In addition, NaCl and agitation facilitated the creation of giant hybrid vesicles from much smaller homogeneous polymersomes and liposomes. Whereas lipid vesicles do not readily fuse with each other under the same circumstances, they did fuse with polymersomes to produce hybrid polymer/lipid vesicles.     

Coarse‐grained molecular dynamics simulation study on spherical and tube‐like vesicles formed by amphiphilic copolymers

Molecular‐level understanding of the vesicular structure and formation process is beneficial for potential vesicle applications, especially in drug delivery. In this article, coarse‐grained molecular dynamics simulation was used to study the self‐assembly behavior of amphiphilic poly(acrylic acid)‐b‐polystyrene copolymers in water at different concentrations and PS/PAA block ratios. It was found that various spherical and tube‐like vesicles formed at PS/PAA 3:3 and 4:2. For spherical vesicles, analysis of vesicular structure indicated that the cavity size was influenced by copolymer concentration and wall thickness by the block ratio. Tube‐like vesicle was formed via the fusion of two spherical vesicles, and a key factor for this morphology is polymer movements between inner and outer layer. This simulation study identifies the key factors governing vesicle formation and structure, and provides a guidance to design and prepare various vesicles for wide applications in drug delivery. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1220–1226     

Directed aggregation and fusion of lipid vesicles induced by DNA-surfactants

We investigated DNA-directed aggregation of vesicles using DNA-surfactants. Following tethering of single-stranded DNA oligonucleotides to vesicles using DNA-surfactant, the tethered vesicles were assembled with other vesicles bearing complementary strands. The vesicle aggregation was strongly affected by the salt concentration and by temperature according to the characteristics of DNA hybridization. Restriction enzyme, which can hydrolyze the double-stranded DNA used in the present study, dissociated the vesicle aggregates. Exploration using fluorescently labeled vesicles suggested that the DNA-directed vesicle aggregation took place in a sequence-specific manner through DNA-duplex formation. Interestingly, the DNA-directed aggregation using short DNA-surfactant induced the fusion of vesicles to produce giant vesicles, resulting in an enzymatic reaction in the giant vesicle.     

Real-time membrane fusion of giant polymer vesicles

Membrane fusion is very important for the formation of many complex organs in metazoans throughout evolution, such as muscles, bones, and placentae. Lipid vesicles (liposomes) are frequently used as model membranes to study the fusion process. This work demonstrates for the first time the real-time membrane fusion of giant polymer vesicles by directly displaying a series of high-resolution and real-time transformation images of individual vesicles. The fusion process includes the sequential steps of membrane contact, forming the center wall, symmetric expansion of fusion pore and complete fusion, undergoing the intermediates of "8" shape with a protruding rim at the contact site, peanut (pear) shape, and oblate sphere. The vesicle swells during fusion, and the fusing vesicle only deforms in the neck domain around the fusion pore in the lateral direction, which verifies the importance of the lateral tension on the fusion pore at the vesicle deformation level. The successful fusion of the synthetic and protein-free polymer vesicles reported here also supports that vesicle proximity combined with membrane perturbation suffices to induce membrane fusion, and that the protein is not necessary for the fusion process.     

Cytomimetic large-scale vesicle aggregation and fusion based on host-guest interaction

Herein, we have shown a large-scale cell-mimetic (cytomimetic) aggregation process by using cell-sized polymer vesicles as the building blocks and intervesicular host-guest molecular recognition interactions as the driving force. We first prepared the hyperbranched polymer vesicles named branched polymersomes (BPs) around 5-10 μm through the aqueous self-assembly of a hyperbranched multiarm copolymer of HBPO-star-PEO [HBPO = hyperbranched poly(3-ethyl-3-oxetanemethanol); PEO = poly(ethylene oxide)]. Subsequently, adamantane-functionalized BPs (Ada-BPs) or β-cyclodextrin-functionalized BPs (CD-BPs) were prepared through the coassembly of HBPO-star-PEO and Ada-modified HBPO-star-PEO (HBPO-star-PEO-Ada), or of HBPO-star-PEO and CD-modified HBPO-star-PEO (HBPO-star-PEO-CD), respectively. Macroscopic vesicle aggregates were obtained by mixing CD-BPs and Ada-BPs. The intervesicular host-guest recognition interactions between β-CD units in CD-BPs and Ada units in Ada-BPs, which were proved by (1)H nuclear Overhauser effect spectroscopy (NOESY) spectrum and the fluorescence probe method, are responsible for the vesicle aggregation. Additionally, the vesicle fusion events happened frequently in the process of vesicle aggregation, which were certified by double-labeling fluorescent assay, real-time observation, content mixing assay, and component mixing assay.     

Facilitation effect of oligonucleotide on vesicle formation from single‐chained cationic surfactant—Dependences of oligonucleotide sequence and size and surfactant structure

The interaction between DNA and surfactant has both biological and technological significances. Recently, we reported for the first time that oligo d(C)₂₅ can induce single‐chained cationic surfactant molecules to aggregate into vesicles. In this article, we studied systematically the formation of vesicles from traditional single‐chained cationic surfactant molecules in the presence of a series of oligonucleotides and found that the facilitation efficiency of oligonucleotide on vesicle formation depends on its size and base composition. Oligo d(T)_n cannot induce vesicle formation, whereas the other oligonucleotides can. Moreover, the oligonucleotide with a bigger size or with a hairpin structure favors vesicle formation more, and the increases in the size of the head group and/or the length of the alkyl group of surfactant decrease the facilitation efficiency of oligonucleotide. Since so far, there is very limited report about the vesicle formation in DNA/single‐chained cationic surfactant solution, this study could be expected to increase the efficiency and applicability for DNA/amphiphile system. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 434–449, 2009     

Giant Biodegradable Poly(ethylene glycol)‐block‐Poly(ε‐caprolactone) Polymersomes by Electroformation

Here, the formation of giant enzyme‐degradable polymersomes using the electroformation method is reported. Poly(ethylene glycol)‐block‐poly(ε‐caprolactone) polymersomes have been shown previously to be attractive candidates for the detection of bacterial proteases and protease mediated release of encapsulated reporter dyes and antimicrobials. To maximize the efficiency, the maximization of block copolymer (BCP) vesicle size without compromising their properties is of prime importance. Thus, the physical‐chemical properties of the BCP necessary to self‐assemble into polymeric vesicles by electroformation are first identified. Subsequently, the morphology of the self‐assembled structures is extensively characterized by different microscopy techniques. The vesicular structures are visualized for giant polymersomes by confocal laser scanning microscopy upon incorporation of reporter dyes during the self‐assembly process. Using time correlated single photon counting and by analyzing the fluorescence decay curves, the nanoenvironment of the encapsulated fluorophores is unveiled. Using this approach, the hollow core structure of the polymersomes is confirmed. Finally, the encapsulation of different dyes added during the electroformation process is studied. The results underline the potential of this approach for obtaining microcapsules for subsequent triggered release of signaling fluorophores or antimicrobially active cargo molecules that can be used for bacterial infection diagnostics and/or treatment.     

Polymersomes as protocellular constructs

Despite the rapidly growing amount of knowledge on the structure and function of cells, they remain a distant bottom‐up synthetic target due to their overwhelming complexity. A path to this goal is the development of protocellular systems that approximate one or more aspects of a natural cell. Polymer vesicles, or polymersomes, are an attractive scaffold for protocellular constructs, due to our ability to engineer the polymer membrane and generate a wide range of properties. This article summarizes the current state of polymersome science with respect to the properties and functions that lend these polymer‐based systems to applications in synthetic cell research. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3817–3825     

Formation and characterization of polymersomes made by a solvent injection method

In this article a solvent injection method is described for vesicle formation using poly(butadiene)‐ b‐poly(acrylic acid) diblock copolymers as the amphiphilic molecules. Vesicles composed of polymer bilayers are commonly referred to as polymersomes. Solvent injection is shown to be a rapid method for polymersome formation suitable to make large volumes of polymersome solution. The method can be manipulated to obtain a wide range of vesicle sizes depending on the polymer concentration and preparation conditions. Polymersome solutions in this study are characterized using dynamic light scattering (DLS), fluorescent microscopy, and electron microscopy. Polymersome sizes range from tens of nanometers to several microns. The membrane thickness of smaller polymersomes is found to lie between 14–20 nm. Larger polymersomes are found to have somewhat thicker membranes. The procedure involves the addition of polymers dissolved in an organic solvent to a stirred aqueous solution. The formation of polymersomes by this method is proposed to be governed by the limited mutual solubility of the two solvents and the simultaneous diffusion of solvent and water out of and in to initially formed organic solvent droplets. Copyright © 2007 John Wiley & Sons, Ltd.     

Hydrogen-bond-directed giant unilamellar vesicles of guanosine derivative: preparation, properties, and fusion

By mixing a small volume of THF containing guanosine derivative 1 and tetraethylenegrycol dodecyl ether (TEGDE) with water and subsequently removing TEGDE by gel permeation chromatography, micrometer-sized giant unilamellar vesicles (GUV) of 1 were successfully prepared. The vesicle membrane was a 2-D sheet assembly of thickness 2.5 nm, composed of a 2-D inter-guanine hydrogen-bond network. The GUV dispersion showed high stability because of a large negative zeta potential, which allowed repeated sedimentation and redispersion by centrifugation and subsequent gentle agitation. TEGDE-triggered fusion of GUVs took place within 350 ms, which proceeded by fusion of the vesicle membranes in contact. These unique static and dynamic properties of the GUV membrane assembled by the 2-D hydrogen-bond network are discussed.     

How molecular internal‐geometric parameters affect PB‐PEO polymersome size in aqueous solution

Amphiphilic polybutadiene polyethylene oxide (PB‐PEO) is one of the best known chemistries to form stable vesicular morphologies, stated as polymersomes, in aqueous environment. Mimicking cell membranes, these structures self‐assemble in an “amphiphilic window” determined by 0.15 < f < 0.35 where f is the ratio between the hydrophilic block volume and the entire diblock volume. However the polymersome size distribution also depends on molecular weight (M_n) and in order to gain insight on how f and M_n together determine polymersome size, we prepared PB‐PEO diblock copolymers with different block lengths and analyzed vesicle morphology via Dynamic light scattering (DLS) and Freeze‐fracture transmission electron microscopy (FF‐TEM). We found three main regimes: high f / low M_n with polymersomes of mixed diameter, high f / high M_n with mainly large polymersomes and low f, with mainly small polymersomes. In the first region, the polymersomes are highly polydisperse. There is a tendency towards increased diameter with increasing f and M_n. Taken together our findings can help to identify how polymersome self‐assembly can be controlled to achieve size distribution specificity alleviating the need for subsequent tuning of size via extrusion. This can pave the way for cost‐effective upscaling of polymersome production for biomedical and biomimetic applications. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 699–708     

Aggregation and fusion of phospholipid vesicles

Membrane fusion and aggregation of phospholipid vesicles are reviewed and discussed. The fusion process is viewed as consisting of several stages: aggregation and close apposition of the particles, destabilization, and finally, merging of the bilayers. A procedure is presented which yields both the rate constant of the dimerization (C₁₁) and the rate constant for fusion of the dimers (f₁₁), which is a direct measure of the probability that two apposed vesicles will fuse. Experimental methods used in the study of membrane fusion are reviewed, primarily with respect to their capacity to monitor the kinetics of vesicle fusion. A few kinetic studies on the mixing of aqueous contents, leakage and increase in size of fusing vesicles are presented in detail.The range of C₁₁ values for Ca²⁺-induced aggregation and fusion of small unilamellar vesicles (SUV, ～ 125 Å radius) composed of phosphatidylserine (PS) is 10⁶ to 5 × 10⁷ M^-1 in the presence of Ca²⁺ concentrations from 1.15 to 2 mM, respectively. For larger PS vesicles (LUV, ～ 500 Å radius) C₁₁ = 6.5 × 10⁷ M^-1s^-1 in the presence of 5 mM Ca²⁺. These values are in good agreement with theoretical calculations based on van der Waals and electrostatic interactions, in which binding of cations is explicitly taken into account. The rate constants of fusion, f₁₁, are 5 s^-1 for PS SUV and 0.08 s^-1 for LUV in the presence of 2 mM and 5 mM Ca²⁺, respectively. The significance of these fusion rate constants to the duration of the fusion event is discussed.Factors affecting fusion such as cations, temperature, membrane composition vesicle concentration and size are reviewed and analyzed. Di- or tri-valent cations induce fusion of acidic phospholipid vesicles (except for phosphatidylinositol) in either pure or mixed form. Among the neutral phospholipids, phosphatidylcholine (PC) inhibits but phosphatidylethanolamine (PE) sustains or enhances the fusion capacity of acidic phospholipid vesicles. Monovalent cations induce reversible aggregation of negatively charged vesicles, but they inhibit the fusion induced by divalent cations such as Ca²⁺ or Mg²⁺. Fusion of neutral phospholipid vesicles, and it occurs the cation-induced fusion of acidic phospholipid vesicles, and it occurs only at temperatures below the gel to liquid crystalline phase transition temperature Tc. This is in contrast to the acidic phospholipid vesicle fusion which is greatly enhanced when the temperature is above the Tc of the phospholipid.     

How preparation and modification parameters affect PB‐PEO polymersome properties in aqueous solution

The effect of formation and modification methods on the physical properties of polymersomes is critical for their use in applications relying on their ability to mimic functional properties of biological membranes. In this study, we compared two formation methods for polymersomes made from polybutadiene‐polyethylene oxide diblock copolymers: detergent‐mediated film rehydration (DFR) and solvent evaporation (SE). DFR‐prepared polymersomes showed a three times higher permeability compared to SE‐prepared polymersomes as revealed by stopped‐flow light scattering. SE‐prepared polymersomes broke down faster to structures <50 nm diameter when processed with extrusion, which was more pronounced at 5 mg mL^?1, compared to 10, 20, and 25 mg mL^?1. Our results indicate that the bilayer of SE‐prepared polymersomes has a lower apparent fluidity. We also investigated the role of n‐octyl‐β‐d ‐glucopyranoside (OG), a detergent typically used for reconstitution of membrane proteins into lipid bilayers. Specifically, we compared dialysis and biobeads for OG removal to investigate the influence of these methods on bilayer conformation and polymer rearrangement following detergent removal. There was no significant difference found between method, temperature, or time within each method. Our findings provide insight on how biocompatible polymersome production affects the physical properties of the resulting polymersomes. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1581–1592     

Concurrent Block Copolymer Polymersome Stabilization and Bilayer Permeabilization by Stimuli‐Regulated “Traceless” Crosslinking

The fabrication of block copolymer (BCP) vesicles (polymersomes) exhibiting synchronized covalent crosslinking and bilayer permeabilization remains a considerable challenge as crosslinking typically leads to compromised membrane permeability. Herein it is demonstrated how to solve this dilemma by employing a stimuli‐triggered crosslinking strategy with amphiphilic BCPs containing photolabile carbamate‐caged primary amines. Upon self‐assembling into polymersomes, light‐triggered self‐immolative decaging reactions release primary amine moieties and extensive amidation reactions then occur due to suppressed amine pK_a within hydrophobic milieu. This leads to serendipitous vesicle crosslinking and the process is associated with bilayer hydrophobicity‐to‐hydrophilicity transition and membrane permeabilization.     

Dewetting instability during the formation of polymersomes from block-copolymer-stabilized double emulsions

We investigate the formation of polymer vesicles, or polymersomes, of polystyrene-block-poly(ethylene oxide) diblock copolymers using double emulsion droplets of controlled architecture as templates. To engineer the structure of the polymersomes, it is important to consider the concentration of diblock copolymer in the middle phase of the double emulsion. We describe how the presence of excess polymer can induce a transition from complete wetting to partial wetting of the middle phase, resulting in polymer shells with inhomogeneous thicknesses.     

The effect of polymer chain length and surface density on the adhesiveness of functionalized polymersomes

Giant cell-like polymer vesicles, polymersomes, made from the diblock copolymer poly(ethylene oxide)-polybutadiene (PEO-PBD), have bilayer structures similar to the cell membrane but have superior and tunable properties for storage and stability. We have modified the terminal hydroxyl of the hydrophilic block with biotin-lysine (biocytin), a biologically derived group that imparts specific adhesiveness to a polymer colloid coated with avidin. The functionalized polymer will form vesicles, either on its own or when mixed with unmodified block copolymers that also form vesicles. The incorporation and mixing of the functionalized polymer into vesicle bilayers is measured using a fluorescent version ofbiocytin with confocal microscopy. The fluorescence signal associated with the vesicle is in proportion with the concentration of functional polymer added during vesicle construction. The adhesiveness of polymer vesicles containing functionalized biotinylated polymer to avidin coated microspheres is measured with micropipet aspiration. Two types of polymer vesicles were constructed: one where the functionalized polymer (molecular weight (MW), 10400 Da) was longer than the surrounding unfunctionalized polymer (MW, 3600 Da) and one where the functionalized polymer (MW, 10400 Da) was the same length as the unfunctionalized polymer. In all cases, the avidin-biotin bonds form kinetically trapped crossbridges that impart little tension as they form but require significantly more tension to break. The relative length of the functionalized polymer on the surface of the vesicle is an important determinant for the adhesion of a polymer vesicle but not for the adsorption of soluble avidin. Greater adhesion strengths are seen where the functionalized polymer is longer than the surrounding polymer. The concentration of functionalized polymer at which adhesion is maximal depends on the relative lengths of the polymers. When the functionalized polymer is the same length as the surface brush of the polymersome membrane, the critical tension is maximal at 10 mol % functionalized polymer concentration. However, when the biocytin groups are attached to a polymer which is larger than the surface brush, the critical tension is maximal at 55 mol % functionalized polymer. These results indicate that polymer mixing and length can control the interfacial adhesion of polymer brushes and must be understood to tune polymersome adhesiveness.     

Odd‐even effect during layer‐by‐layer assembly of polyelectrolytes inspired by marine mussel

Biomimetic polyelectrolyte of Dopa modified poly(acrylic acid) (PAADopa) was synthesized taking advantage of Dopa, the major unit of marine adhesive proteins. Zinc crosslinked PAADopa (PAADopa‐Zn) were formed at acidic pH for more compact structure and assembled with the positively charged polyethylenimine (PEI) to build robust polyelectrolyte multilayers at high salt concentration. Effects of pH, crosslinking degree, and salt concentration on polymer structure, film building process, and morphology were investigated, respectively. An “odd‐even” effect was observed by quartz crystal microbalance with dissipation and AFM in the presence of zinc ion, which becomes more obvious with an optimum crosslinking degree (Zn/Dopa = 2.0) under high salt concentration (0.6 M NaCl). It indicates the different swollen properties of PEI chain and PAADopa‐Zn complexes during the layer‐by‐layer building process under optimum crosslinking degree of PAADopa‐Zn at high salt concentration. Such odd‐even phenomenon of the biocompatible system is of critical importance for understanding the mechanism of layer formation and film structures. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 245–255     

Microfluidic fabrication of monodisperse biocompatible and biodegradable polymersomes with controlled permeability

We describe a versatile technique for fabricating monodisperse polymersomes with biocompatible and biodegradable diblock copolymers for efficient encapsulation of actives. We use double emulsion as a template for the assembly of amphiphilic diblock copolymers into vesicle structures. These polymersomes can be used to encapsulate small hydrophilic solutes. When triggered by an osmotic shock, the polymersomes break and release the solutes, providing a simple and effective release mechanism. The technique can also be applied to diblock copolymers with different hydrophilic-to-hydrophobic block ratios, or mixtures of diblock copolymers and hydrophobic homopolymers. The ability to make polymer vesicles with copolymers of different block ratios and to incorporate different homopolymers into the polymersomes will allow the tuning of polymersome properties for specific technological applications.     

Anion effects on the phase transition of N‐isopropylacrylamide hydrogels

NMR spectra were collected for poly(N‐isopropylacrylamide) (PNIPAAm) hydrogel using high‐resolution magic angle spinning (HRMAS) after gel pieces were hydrated in the presence of D₂O, NaF, NaCl, and NaI aqueous solutions. Changes in the peak height intensity of the spectra provide quantitative insight into the phase transition process. The thermodynamic values of the phase transition were calculated using a van't Hoff analysis of the NMR data. Unlike the trend observed for decreases in the (LCST), changes in the enthalpy and entropy did not clearly display a linear dependence with respect to salt concentration. Rather, it was observed that increases in salt concentration did not affect the enthalpy and entropy to the extent as the initial change observed between no salt and 100 mM solutions. Finally, the effect of salts on the hysteresis of the rehydrating process was observed. Hysteresis occurs due to the need for hydrophobic interactions to break down before water is able to infiltrate the polymer matrix. NaF stabilizes hydrophobic interactions while NaI destabilize hydrophobic interactions, causing them to break down at higher temperatures. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012