Hollow Silica Spheres Embedded in a Porous Carbon Matrix and Its Superior Performance as the Anode for Lithium‐Ion Batteries

Silica (SiO₂) is regarded as one of the most promising anode materials for lithium‐ion batteries due to the high theoretical specific capacity and extremely low cost. However, the low intrinsic electrical conductivity and the big volume change during charge/discharge cycles result in a poor electrochemical performance. Here, hollow silica spheres embedded in porous carbon (HSS–C) composites are synthesized and investigated as an anode material for lithium‐ion batteries. The HSS–C composites demonstrate a high specific capacity of about 910 mA h g^?1 at a rate of 200 mA g^?1 after 150 cycles and exhibit good rate capability. The porous carbon with a large surface area and void space filled both inside and outside of the hollow silica spheres acts as an excellent conductive layer to enhance the overall conductivity of the electrode, shortens the diffusion path length for the transport of lithium ions, and also buffers the volume change accompanied with lithium‐ion insertion/extraction processes.     

Tailoring MoS2 Ultrathin Sheets Anchored on Graphene Flexible Supports for Superstable Lithium‐Ion Battery Anodes

2D MoS₂ has a significant capacity decay due to the stack of layers during the charge/discharge process, which has seriously restricted its practical application in lithium‐ion batteries. Herein, a simple preform‐in situ process to fabricate vertically grown MoS₂ nanosheets with 8–12 layers anchored on reduced graphene oxide (rGO) flexible supports is presented. As an anode in MoS₂/rGO//Li half‐cell, the MoS₂/rGO electrode shows a high initial coulomb efficiency (84.1%) and excellent capacity retention (84.7% after 100 cycles) at a current density of 100 mA g^?1. Moreover, the MoS₂/rGO electrode keeps capacity as high as 786 mAh g^?1 after 1000 cycles with minimum degradation of 54 µAh g^?1 cycle^?1 after being further tested at a high current density of 1000 mA g^?1. When evaluated in a MoS₂/rGO//LiCoO₂ full‐cell, it delivers an initial charge capacity of 153 mAh g^?1 at a current density of 100 mA g^?1 and achieves an energy density of 208 Wh kg^?1 under the power density of 220 W kg^?1.     

Graphene‐Based Phosphorus‐Doped Carbon as Anode Material for High‐Performance Sodium‐Ion Batteries

Graphene‐based phosphorus‐doped carbon (GPC) is prepared through a facile and scalable thermal annealing method by triphenylphosphine and graphite oxide as precursor. The P atoms are successfully doped into few layer graphene with two forms of P–O and P–C bands. The GPC used as anode material for Na‐ion batteries delivers a high charge capacity 284.8 mAh g^?1 at a current density of 50 mA g^?1 after 60 cycles. Superior cycling performance is also shown at high charge?discharge rate: a stable charge capacity 145.6 mAh g^?1 can be achieved at the current density of 500 mA g^?1 after 600 cycles. The result demonstrates that the GPC electrode exhibits good electrochemical performance (higher reversible charge capacity, super rate capability, and long‐term cycling stability). The excellent electrochemical performance originated from the large interlayer distance, large amount of defects, vacancies, and active site caused by P atoms doping. The relationship of P atoms doping amount with the Na storage properties is also discussed. This superior sodium storage performance of GPC makes it as a promising alternative anode material for sodium‐ion batteries.     

A facile synthesis of heteroatom-doped carbon framework anchored with TiO<Subscript>2</Subscript> nanoparticles for high performance lithium ion battery anodes

Titanium dioxide (TiO₂)-based materials have been well studied because of the high safety and excellent cycling performance when employed as anode materials for lithium ion batteries (LIBs), whereas, the relatively low theoretical capacity (only 335 mAh g^?1) and serious kinetic problems such as poor electrical conductivity (~?10^?13S cm^?1) and low lithium diffusion coefficient (~?10^?9 to 10^?13 cm² s^?1) hinder the development of the TiO₂-based anode materials. To overcome these drawbacks, we present a facile strategy to synthesize N/S dual-doping carbon framework anchored with TiO₂ nanoparticles (NSC@TiO₂) as LIBs anode. Typically, TiO₂ nanoparticles are anchored into the porous graphene-based sheets with N, S dual doping feature, which is produced by carbonization and KOH activation process. The as-obtained NSC@TiO₂ electrode exhibits a high specific capacity of 250 mAh g^?1 with a coulombic efficiency of 99% after 500 cycles at 200 mA g^?1 and excellent rate performance, indicating its promising as anode material for LIBs.     

Scalable synthesis and superior performance of TiO<Subscript>2</Subscript>-reduced graphene oxide composite anode for sodium-ion batteries

TiO₂-reduced graphene oxide (RGO) composite was synthesized via a sol-gel process and investigated as an anode material for sodium-ion batteries (SIBs). A remarkable improvement in sodium ion storage with a reversible capacity of 227 mAh g^?1 after 50 cycles at 50 mA g^?1 is achieved, compared to that (33 mAh g^?1) for TiO₂. The enhanced electrochemical performance of TiO₂-RGO composite is attributed to the larger specific surface area and better electrical conductivity of TiO₂-RGO composite. The excellent performance of TiO₂-RGO composite enables it a potential electrode material for SIBs.     

Metal Oxide Nanomaterials with Nitrogen‐Doped Graphene‐Silk Nanofiber Complexes as Templates

Fabricating electrode materials with superior electrochemical performance remains a challenge. Here, a simple but effective strategy for the formation of metal oxide nanomaterials with superior performance has been developed. Silk protein nanofibers adhered on reduced graphene oxide (rGO) sheets are used as templates to regulate the formation of nanostructured iron oxide composites, achieving porous nanorod structures that could not be attained in control experiments. These porous nanorods demonstrate superior electrochemical performance as electrodes with retention of a capacity of 1495 mAh g^?1 after 180 cycles at 0.2 C and a rate capability of 900 mAh g^?1 at 2 C discharge rate. These new rGO/silk composite templates provide a more controllable environment for Fe₂O₃ fabrication, resulting in improved nanostructures and superior electrical performance. The strategy developed here should also be more broadly applicable in the design of metal oxide nanomaterials with specialized structures and useful performance.     

Vertical aligned V<Subscript>2</Subscript>O<Subscript>5</Subscript> nanoneedle arrays grown on Ti substrate as binder-free cathode for lithium-ion batteries

V₂O₅ nanoneedle arrays were grown directly on titanium (Ti) substrate by a facile solvothermal route followed with calcination at 350 °C for 2 h. The as-prepared V₂O₅ nanoneedles are about 50 nm in diameter and 800 nm in length. The electrochemical behavior of V₂O₅ nanoarrays as binder-free cathode for lithium-ion batteries (LIBs) was evaluated by cyclic voltammetry and galvanostatic discharge/charge tests. Compared with V₂O₅ powder electrode, V₂O₅ nanoneedle arrays electrode exhibited improved electrochemical performance in terms of high discharge capacity of 262.5 mA h g^?1 between 2.0 and 4.0 V at 0.2 C, and high capacity retention up to 77.1% after 100 cycles. Under a high current rate of 2 C, a discharge capacity of about 175.6 mA h g^?1 can be maintained. The enhanced performance are mainly due to the intimate contact between V₂O₅ nanoneedle active material and current collector, which enable shortened electron transfer pathway and improved charge transfer kinetics, demonstrating their potential applications in high rate electrochemical storage devices.     

Nanocrystalline Li<Subscript>2</Subscript>TiO<Subscript>3</Subscript> electrodes for supercapattery application

Nanocrystalline Li₂TiO₃ was successfully synthesized using solid-state reaction method. The microstructural and electrochemical properties of the prepared material are systematically characterized. The X-ray diffraction pattern of the prepared material exhibits predominant (002) orientation related to the monoclinic structure with C2/c space group. HRTEM images and SAED analysis reveal the well-developed nanostructured particles with average size of ～40 nm. The electrochemical properties of the prepared sample are carried out using cyclic voltammetry (CV) and chronopotentiometry (CP) using Pt//Li₂TiO₃ cell in 1 mol L^?1 Li₂SO₄ aqueous electrolyte. The Li₂TiO₃ electrode exhibits a specific discharge capacity of 122 mAh g^?1; it can be used as anode in Li battery within the potential window 0.0–1.0 V, while investigated as a supercapacitor electrode, it delivers a specific capacitance of 317 F g^?1 at a current density of 1 mA g^?1 within the potential range ?0.4 to +0.4 V. The demonstration of both anodic and supercapacitor behavior concludes that the nanocrystalline Li₂TiO₃ is a suitable electrode material for supercapattery application.     

Encapsulating Tin Dioxide@Porous Carbon in Carbon Tubes: A Fiber‐in‐Tube Hierarchical Nanostructure for Superior Capacity and Long‐Life Lithium Storage

A novel fiber‐in‐tube hierarchical nanostructure of SnO₂@porous carbon in carbon tubes (SnO₂@PC/CTs) is creatively designed and synthesized though a carbon coating on scalable electrospun hybrid nanofibers template and a post‐etching technique. This 1D nanoarchitecture consists of double carbon‐buffering matrixes, i.e., the external carbon tubular shell and the internal porous carbon skeleton, which can work synergistically to address the various issues of SnO₂ nanoanode operation, such as pulverization, particle aggregation, and vulnerable electrical contacts between the SnO₂ nanoparticles and the carbon conductors. Thus, the as‐obtained SnO₂@PC/CTs nanohybrids used as a lithium‐ion‐battery anode exhibits a higher reversible capacity of 1045 mA h g^?1 at 0.5 A g^?1 after 300 cycles as well as a high‐rate cycling stability after 1000 cycles. The enhanced performance can be attributed to the wonderful merits of the external carbon protective shell for preserving the integrity of the overall electrode, and the internal porous carbon skeleton for inhibiting the aggregation and electrical isolation of the active particles during cycling.     

A Facile Method for Synthesis of Porous NiCo2O4 Nanorods as a High‐Performance Anode Material for Li‐Ion Batteries

Porous electrode materials with large specific surface area, relatively short diffusion path, and higher electrical conductivity, which display both better rate capabilities and good cycle lives, have huge benefits for practical applications in lithium‐ion batteries. Here, uniform porous NiCo₂O₄ nanorods (PNNs) with pore‐size distribution in the range of 10–30 nm and lengths of up to several micrometers are synthesized through a convenient oxalate co‐precipitation method followed by a calcining process. The PNN electrode exhibits high reversible capacity and outstanding cycling stability (after 150 cycles still maintain about 650 mA h g^?1 at a current density of 100 mA g^?1), as well as high Coulombic efficiency (>98%). Moreover, the PNNs also exhibit an excellent rate performance, and deliver a stable reversible specific capacity of 450 mA h g^?1 even at 2000 mA g^?1. These results demonstrate that the PNNs are promising anode materials for high‐performance Li‐ion batteries.     

Synthesis of carbon microtubules core structure LiFePO4 via a template-assisted method

The carbon microtubules core structure LiFePO₄ is synthesized using a cotton fiber template-assisted method. The crystalline structure and morphology of the product is characterized by X-ray diffraction and field emission scanning electron microscopy. The charge–discharge kinetics of the LiFePO₄ electrode is investigated using cyclic voltammetry and electrochemical impedance spectroscopy. The result shows that the well-crystallized carbon microtubules core structure LiFePO₄ is successfully synthesized. The as-synthesized material exhibits a high initial discharge capacity of 167 mAh g^?1 at 0.2 C rate. The material also shows good high-rate discharge performance and cycling stability, about 127 mAh g^?1 and 94.7 % capacity retention after 100 cycles even at 5.0 C rate.     

Nitrogen-doped carbon nanofiber decorated LiFePO<Subscript>4</Subscript> composites with superior performance for lithium-ion batteries

Nitrogen-doped carbon nanofiber (NCNF) decorated LiFePO₄ (LFP) composites are synthesized via an in situ hydrothermal growth method. Electrochemical performance results show that the embedded NCNF can improve electron and ion transfer, thereby resulting in excellent cycling performance. The as-prepared LFP and NCNF composites exhibit excellent electrochemical properties with discharge capacities of 188.9 mAh g^?1 (at 0.2 C) maintained at 167.9 mAh g^?1 even after 200 charge/discharge cycles. The electrode also presents a good rate capability of 10 C and a reversible specific capacity as high as 95.7 mAh g^?1. LFP composites are a potential alternative high-performing anode material for lithium ion batteries.     

3D Array of Bi2S3 Nanorods Supported on Ni Foam as a Highly Efficient Integrated Oxygen Electrode for the Lithium‐Oxygen Battery

Bismuth sulfide nanorod array is directly grown on nickel foam (R‐Bi₂S₃/NF) to serve as a completely carbon and binder‐free 3D porous oxygen electrode material for lithium‐oxygen (Li‐O₂) batteries. The synergistic effect of the fast kinetics of electron transport and gas and electrolyte diffusion provided by the continuous free‐standing network structure and the excellent electrocatalytic activity of the bismuth sulfide nanorod array enables outstanding performance of the oxygen electrode. Li‐O₂ battery with the free‐standing R‐Bi₂S₃/NF oxygen electrode exhibits high energy efficiency (78.7%), good rate capability (4464 mA h g⁻¹ at 1500 mA g⁻¹), as well as excellent cyclability (146 cycles) while maintaining a moderate specific capacity of 1000 mA h g⁻¹. The effect of cathodes with different reactant (O₂) and intermediate (LiO₂) adsorbability on the product (Li₂O₂) growth model is studied by first‐principle calculations. The strong O₂ adsorption and weak LiO₂ adsorption on Bi₂S₃ drives the growth of large‐size Li₂O₂ particles via solution growth model. Remarkably, the large‐area pouch‐type Li‐O₂ battery delivers an energy density of 330 Wh kg⁻¹. The present results open up a promising avenue toward developing novel electrode architecture for high‐performance Li‐O₂ batteries through controlling morphology and functionality of porous electrodes.     

Co3O4 Hollow Nanoparticles and Co Organic Complexes Highly Dispersed on N‐Doped Graphene: An Efficient Cathode Catalyst for Li‐O2 Batteries

Rechargeable Li‐O₂ batteries are promising candidates for electric vehicles due to their high energy density. However, the current development of Li‐O₂ batteries demands highly efficient air cathode catalysts for high capacity, good rate capability, and long cycle life. In this work, a hydrothermal‐calcination method is presented to prepare a composite of Co₃O₄ hollow nanoparticles and Co organic complexes highly dispersed on N‐doped graphene (Co–NG), which acts as a bifunctional air cathode catalyst to optimize the electrochemical performances of Li‐O₂ batteries. Co–NG exhibits an outstanding initial discharge capacity up to 19 133 mAh g^?1 at a current density of 200 mA g^?1. In addition, the batteries could sustain 71 cycles at a cutoff capacity of 1000 mAh g^?1 with low overpotentials at the current density of 200 mA g^?1. Co–NG composites are attractive as air cathode catalysts for rechargeable Li‐O₂ batteries.     

Facile synthesis and characterization of high-performance NiMoO<Subscript>4</Subscript> · <Emphasis Type="Italic">x</Emphasis>H<Subscript>2</Subscript>O nanorods electrode material for supercapacitors

One-dimensional NiMoO₄ · xH₂O nanorods were synthesized by a facile template-free hydrothermal method as a potential electrode material for supercapacitors. The influences of reaction temperature, reaction time, and nickel source on the properties of resultant samples were investigated. Electrochemical data reveal that the as-synthesized one-dimensional NiMoO₄ · xH₂O nanorod superstructures can deliver a remarkable specific capacitance (SC) of 1131 F g^?1 at a current density of 1 A g^?1 and remain as high as 914 F g^?1 at 10 A g^?1 in a 6 M KOH aqueous solution. Moreover, there is only 6.2 % loss of the maximum SC after 1000 continuous charge–discharge cycles at the high current density of 10 A g^?1. Such outstanding electrochemical performance may be owing to the unique one-dimensional hierarchical structures, which can facilitate the electrolyte ions and electrons to easily contact the NiMoO₄ nanorod building blocks and then allow for sufficient faradaic reactions to take place, even at high current densities.     

Sulfur Immobilized in Hierarchically Porous Structured Carbon as Cathodes for Lithium–Sulfur Battery with Improved Electrochemical Performance

In order to overcome the main obstacles for lithium–sulfur batteries, such as poor conductivity of sulfur, polysulfide intermediate dissolution, and large volume change generated during the cycle process, a hard‐template route is developed to synthesize large‐surface area carbon with abundant micropores and mesopores to immobilize sulfur species. The microstructures of the C/S hybrids are investigated using field emission scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, Raman spectroscopy, X‐ray photoelectron spectroscopy, nitrogen adsorption–desorption isotherms, and electrochemical impedance spectroscopy techniques. The large surface and porous structure can effectively alleviate large strain due to the lithiation/delithiation process. More importantly, the micropores can effectively confine small molecules of sulfur in the form of S_2–4, avoiding loss of active S species and dissolution of high‐order lithium polysulfides. The porous C/S hybrids show significantly enhanced electrochemical performance with good cycling stability, high specific capacity, and rate capability. The C/S‐39 hybrid with an optimal content of 39 wt% S shows a reversible capacity of 780 mA h g^?1 after 100 cycles at the current density of 100 mA g^?1. Even at a current density of 5 A g^?1, the reversible capacity of C/S‐39 can still maintain at 420 mA h g^?1 after 60 cycles. This strategy offers a new way for solving long‐term reversibility obstacle and designing new cathode electrode architectures.     

Template‐Free Fabrication of Hollow NiO–Carbon Hybrid Nanoparticle Aggregates with Improved Lithium Storage

Hollow NiO–carbon hybrid nanoparticle aggregates are fabricated through an environmental template‐free solvothermal alcoholysis route. Controlled hollow structure is achieved by adjusting the ratio of ethylene glycol to water and reaction time of solvothermal alcoholysis. Amorphous carbon can be loaded on the NiO nanoparticles uniformly in the solvothermal alcoholysis process, and the subsequent calcination results in the formation of hollow NiO–C hybrid nanoparticle aggregates. As anode materials for lithium‐ion batteries, it exhibits a stable reversible capacity of 622 mAh g^?1, and capacity retention keeps over 90.7% after 100 cycles at constant current density of 200 mA g^?1. The NiO–C electrode also exhibits good rate capabilities. The unique hollow structures can shorten the length of Li‐ion diffusion and offer a sufficient void space, which sufficiently alleviates the mechanical stress caused by volume change. The hybrid carbon in the particles renders the electrode having a good electronic conductivity. Here, the hollow NiO‐C hybrid electrode exhibits excellent electrochemical performance.     

Low-temperature one-step solid-phase synthesis of carbon-encapsulated TiO<Subscript>2</Subscript> nanocrystals as anode materials for lithium-ion batteries

A simple and highly efficient method is developed for in situ one-step preparation of carbon co-encapsulated anatase and rutile TiO₂ nanocrystals (TiO₂@C) with core-shell structure for lithium-ion battery anode. The synthesis is depending on the solid-phase reaction of titanocene dichloride with ammonium persulfate in an autoclave at 200 °C for 30 min. The other three titanocene complexes including bis(cyclopentadienyl)dicarbonyl titanium, cyclopentadienyltitanium trichloride, and cyclopentadienyl(cycloheptatrienyl)titanium are used instead to comprehensively investigate the formation mechanism and to improve the microstructure of the product. The huge heat generated during the explosive reaction cleaves the cyclopentadiene ligands into small carbon fragments, which form carbon shell after oxidative dehydrogenation coating on the TiO₂ nanocrystals, resulting in the formation of core-shell structure. The TiO₂ nanocrystals prepared by titanocene dichloride have an equiaxed morphology with a small diameter of 10–55 nm and the median size is 30.3 nm. Hundreds of TiO₂ nanocrystals are encapsulated together by the worm-like carbon shell, which is amorphous and about 20–30 nm in thickness. The content of TiO₂ nanocrystals in the nanocomposite is about 31.1 wt.%. This TiO₂@C anode shows stable cyclability and retains a good reversible capacity of 400 mAh g^?1 after 100 cycles at a current density of about 100 mA g^?1, owing to the enhanced conductivity and protection of carbon shell.     

Synthesis of hierarchical MoS<Subscript>2</Subscript> microspheres composed of nanosheets assembled via facile hydrothermal method as anode material for lithium-ion batteries

A hierarchical MoS₂ architecture composed of nanosheet-assembled microspheres with an expanded interplanar spacing of the (002) planes was successfully prepared via a simple hydrothermal reaction. Electron microscopy studies revealed formation of the MoS₂ microspheres with an average diameter of 230 nm. It was shown that the hierarchical structure of MoS₂ microspheres possesses both the merits of nanometer-sized building blocks and micrometer-sized assemblies, which offer high surface area for fast kinetics and buffers the volume expansion during lithium insertion/deinsertion, respectively. The micrometer-sized assemblies were found to contribute to the enhanced electrochemical stabilities of the electrode materials. The mentioned advantages of the MoS₂ electrode prepared in this work allowed enhanced cyclability and high rate capability of the material. Along with this, the material delivered a high initial discharge capacity of 1206 mAh g^?1 and a reversible discharge capacity of 653 mAh g^?1 after 100 cycles at a current density of 100 mA g^?1. Furthermore, the material delivered a high reversible capacity of 480 mAh g^?1 at a high current density of 1000 mA g^?1.     

Novel CeO<Subscript>2</Subscript> nanorod framework prepared by dealloying for supercapacitors applications

The CeO₂ nanorod framework was synthesized via a facile-dealloying method coupled with calcination treatment for supercapacitors. X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) characterizations identified the cubic phase and nanorod morphology of the synthesized sample. Their electrochemical performance was also evaluated by cyclic voltammetry, galvanostatic charge-discharge tests, and cycling performances. The results show that CeO₂ nanorod framework possesses high-specific capacitance and superior charge/discharge stability, which are mainly ascribed to its high-Brunauer-Emmett-Tellar surface area (110.6 m² g^?1). Notably, the CeO₂//AC (Active Carbon) asymmetric supercapacitor device exhibits excellent cycling stability with capacity retention of 133.6% after cycling for 30,000 cycles.