Fabrication of asymmetrically superhydrophobic cotton fabrics via mist copolymerization of 2,2,2‐trifluoroethyl methacrylate

We report here a simple strategy for fabricating asymmetrically superhydrophobic cotton fabric via a mist copolymerization of three monomers, 2,2,2‐trifluoroethyl methacrylate (TFMA), 2‐isocyanatoethyl methacrylate (IEM), and divinylbenzene (DVB). The copolymer layer on the cotton surface was confirmed by X‐ray photoelectron spectroscopy (XPS) analysis and attenuated total reflection (ATR) accessory, and the nanoscale hierarchical structures in the polymeric layer were demonstrated by observation of field emission scanning electron microscope (FE‐SEM). Surface characterization reveals that the modified surface is superhydrophobic, but the opposite side of the modified cotton fabric has the hydrophilic nature of cotton. More experimental data suggest that the good water adsorptivity and vapor transmissibility of the original cotton fabric were inherited after the surface modification. These properties are of great significance in textile and medical applications. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1862–1871     

Synthesis of high thermal stability polybenzoxazoles via ortho‐imide‐functional benzoxazine monomers

We report our work for preparing cross‐linked polyimide via a series of imide functional benzoxazine resins as precursors. The structures of synthesized monomers have been confirmed by ¹H NMR and FT‐IR. Among this class of benzoxazine monomers, the ortho‐imide functional benzoxazine resins show useful features both in the synthesis of benzoxazine monomers and the properties of the corresponding thermosets. For the cross‐linked polyimides based on ortho‐imide functional benzoxazine, an additional route is adopted to form a more thermally stable cross‐linked polybenzoxazole with the release of carbon dioxide. The ortho‐imide functional benzoxazine resins show the possibility to form high performance and even super high performance thermosets with low cost and easy processability. The thermal properties are evaluated by DSC and TGA. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1330–1338     

Synthesis,characterization, and photocuring of siloxane‐oxirane monomers

The aim of this study was to synthesize, characterize, and evaluate alternative monomers for use in dentistry. Three siloxane‐oxirane low‐shrinkage monomers were synthesized, and the products’ conversion was followed by Fourier transform ‐ infrared spectroscopy. The products obtained were characterized by ¹H and ¹³C NMR and evaluated for viscosity and a refractive index. The polymerization was evaluated by formulating two experimental photoinitiation systems, which varied for the presence of 1,2 ethanediol. A ternary system with camphorquinone (CQ), ethyl 4‐dimethylaminobenzoate (EDAB), and diphenyliodonium hexafluorphosphate (DPI) was used as control. The degree of conversion was assessed by differential scanning calorimetry (DSC). The NMR confirmed the synthesis success with 75, 87, and 55% yields for the monomers synthesized. The viscosity and the refractive index of the monomers showed favorable rheological and physical behaviors for application in dentistry. Moreover, the presence of 1,2 ‐ ethanediol increased the degree of conversion of the siloxane‐oxirane monomers. This study showed a simple and effective way to synthesize siloxane‐oxirane monomers with a high potential for application in dental materials. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1728–1733     

Greatly enhanced thermo‐oxidative stability of polybenzoxazine thermoset by incorporation of m‐carborane

Novel polybenzoxazine precursor containing m‐carborane unit in the main‐chain has been firstly synthesized through click reaction of diazidomethyl m‐carborane (DAMC) and diacetylene bisbenzoxazine (DABB). Meanwhlie, the traditional polybenzoxazine precursor was also prepared through click reaction of diazidomethyl p‐benzene (DAPB) and DABB as a control. 1H NMR was used to confirm the structures of the monomers and the resulting polymers. FT‐IR and differential scanning calorimetry (DSC) were used to study the curing behavior of carborane‐containing benzoxazine polymer (CCBP). Dynamic mechanical analysis (DMA) study demonstrated that the cured CCBP had high storage moduli and high Tg. Thermogravimetric analysis (TGA) and ablation test showed that the cured CCBP had outstanding thermo‐oxidative stability. During thermal ablation of cured CCBP, organic material was degraded, and a passivation layer with oxidized m‐carboranes was formed, which prevented the underlying polymer from further degradation. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 973–980     

Synthesis of poly(2‐oxazoline)s with side chain methyl ester functionalities: Detailed understanding of living copolymerization behavior of methyl ester containing monomers with 2‐alkyl‐2‐oxazolines

Poly(2‐oxazoline)s with methyl ester functionalized side chains are interesting as they can undergo a direct amidation reaction or can be hydrolyzed to the carboxylic acid, making them versatile functional polymers for conjugation. In this work, detailed studies on the homo‐ and copolymerization kinetics of two methyl ester functionalized 2‐oxazoline monomers with 2‐methyl‐2‐oxazoline, 2‐ethyl‐2‐oxazoline, and 2‐n‐propyl‐2‐oxazoline are reported. The homopolymerization of the methyl ester functionalized monomers is found to be faster compared to the alkyl monomers, while copolymerization unexpectedly reveals that the methyl ester containing monomers significantly accelerate the polymerization. A computational study confirms that methyl ester groups increase the electrophilicity of the living chain end, even if they are not directly attached to the terminal residue. Moreover, the electrophilicity of the living chain end is found to be more important than the nucleophilicity of the monomer in determining the rate of propagation. However, the monomer nucleophilicity can be correlated with the different rates of incorporation when two monomers compete for the same chain end, that is, in copolymerizations. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2649–2661     

Norbornene derivatives from a metal‐free,strain‐promoted cycloaddition reaction: New building blocks for ring‐opening metathesis polymerization reactions

The preparation of new ring opening metathesis polymerization (ROMP) monomers using a 1,3‐dipolar cycloaddition between aryl azides and norbornadiene is described. Various norbornenetriazolines, obtained through a solvent‐and catalyst‐free reaction, can subsequently be incorporated into polymer backbones through ROMP reactions. Furthermore, thermal decomposition of the triazoline moiety can allow for further polymer functionalization. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2357–2362     

Segmented conjugated macromolecules containing silicon and boron: ADMET synthesis and luminescent properties

Boron‐ and silicon‐containing conjugated homo‐ and copolymers could be synthesized using acyclic diene metathesis (ADMET) condensation of bis‐styryl monomers. Both, tri‐and tetra‐coordinated boron monomers were successfully polymerized forming homopolymers, or random copolymers (if polymerized together with a silicon containing co‐monomer). Polymer molecular weights M_n were measured at ～6000 to 15,000 g/mol (NMR end group analysis) with molecular weight distributions M_w/M_n ～1.8 to 2.2. The polymers absorbed at λ_max ～317 to 406 nm and emitted at λ_max ～370 to 494 nm with fluorescent quantum efficiencies ～24 to 48%. The copolymer with tri‐coordinate boron showed highly efficient fluorescence quenching in the presence of fluoride ions at ratios boron/fluoride ～5/1, demonstrating its potential as anion sensor. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1707–1718     

Synthesis and evaluation of new phosphonic acid‐functionalized acrylamides with potential biomedical applications

Phosphorus‐containing acidic monomers are able to interact with the inorganic phase of mineralized tissues such as enamel, dentin, and bone. From this perspective, three phosphonic acid‐containing acrylamide monomers with different lengths of alkyl chains were synthesized to be used for both self‐etching dental adhesives and mineralized hydrogel scaffolds. Monomers were synthesized by the reaction of α‐aminophosphonates (diethyl aminomethylphosphonate, diethyl 2‐aminobutan‐2‐ylphosphonate, and diethyl 2‐aminooctan‐2‐ylphosphonate) with acryloyl chloride followed by the hydrolysis of phosphonate groups by using trimethylsilyl bromide. The properties such as pH in the range of mild self‐etching adhesives, hydrolytic stability, high rate of copolymerizations with 2‐hydroxyethyl methacrylate (HEMA) and HEMA/glycerol dimethacrylate, giving high‐molecular‐weight polymers on thermal polymerization, and strong decalcification ability of hydroxyapatite make these monomers good candidates for self‐etching adhesives, although no appreciable effect of the number and size of the α‐substituents was observed. Hydrogel scaffolds containing phosphonic acid groups were fabricated, characterized, and mineralized. Altogether, the results suggest that these phosphonic acid‐containing monomers have suitable properties to be used in fabrication of biomaterials for both dental and bone tissue engineering applications. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2755–2767     

Synthesis and physical properties of highly branched perfluorinated polymers from AB and AB2 monomers

Highly branched perfluorinated aromatic polyether copolymers were prepared from the polycondensation of the AB₂ monomer, 3,5‐bis[(pentafluorobenzyl)oxy]benzyl alcohol with a variety of fluoroaryl and alkyl bromide AB comonomers. The structures and comonomer distribution of the resulting polymers were characterized in detail. ¹H NMR data from kinetic trials illustrated that perfluoroaryl AB comonomer distribution correlated to AB comonomer sterics. ¹⁹F NMR data revealed that fluorinated AB monomers and 3‐bromo‐1‐propanol AB monomers were distributed within the AB₂ polymer backbone, while longer alkyl bromide AB monomers, 6‐bromo‐1‐hexanol, were mostly distributed along hyperbranched polymer chain ends. In general, as AB comonomer incorporation increased for nonsterically hindered copolymers, thermal decomposition onset increased and glass transition temperatures decreased. The combined data demonstrated the effect of comonomer distribution and sterics on physical properties of AB₂‐based polymer systems. The resulting materials were used to cast thin polymer films for measurement of contact angle, which were shown to be directly related to comonomer content. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1880–1894     

Catalytic [2 + 2 + 2] cycloaddition polymerization of diyne–nitrile monomers in the presence of CoCl2‐6H2O/diphosphine/Zn

Cobalt‐catalyzed [2 + 2 + 2] cocycloaddition reaction of 1,6‐diynes and nitriles to generate substituted pyridines has been applied to the polymerization of diyne–nitrile monomers, the reaction of which proceeded smoothly in a step‐growth fashion to provide linear polymers comprising pyridine structures in the main chain. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 345–351     

High refractive index materials: A structural property comparison of sulfide‐ and sulfoxide‐containing polyamides

High‐refractive‐index polyamides (PAs) are developed by incorporation of sulfide‐ or sulfoxide linkages and chlorine substituents. The PAs are synthesized through the polycondensation of two novel diamine monomers, 2,2′‐sulfide‐bis(4‐chloro‐1‐(4‐aminophenoxy) phenyl ether (3a) and 2,2′‐sulfoxide‐bis(4‐chloro‐1‐(4‐aminophenoxy) phenyl ether (3b), with various aromatic diacids (a–e). The ortho‐sulfide or sulfoxide units, pendant chlorine groups, and flexible ether linkages in the diamine monomers endowed the obtained PAs with excellent solubilities in organic solvents. The resulting PAs showed high thermal stability, with 10% weight loss temperatures exceeding 415 °C under nitrogen and 399 °C in air atmosphere. The combination of chlorine substituents, sulfide or sulfoxide linkages, and ortho‐catenated structures provided polymers with high transparency along with high refractive index values of up to 1.7401 at 632.8 nm and low birefringences (<0.0075). The structure–property relationships of the analogous PAs containing sulfide or sulfoxide linkages were also studied in detail by comparing the results. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2867–2877     

Synthesis of new optically active α,α′,β‐trisubstituted‐β‐lactones as monomers for stereoregular biopolyesters

Various optically active (4R)‐alkyloxycarbonyl‐3,3‐dialkyl‐2‐oxetanones as monomers were synthesized from L‐(S)‐malic acid in six steps to prepare a new family of stereopolyesters for biomedical applications. The synthesis began with an esterification followed of a dialkylation in the aim to introduce hydrophobic groups as methyl or reactive group as allyl. Then, a saponification has permitted to obtain the corresponding diacids that reacted with appropriate alcohols to furnish different monoesters. The last and most important step was activation of hydroxyl group of monoesters with the asymmetric carbon configuration inversion according to the Mitsunobu reaction. Thus, this reaction has provided lactones from monoesters with 100% enantiomeric excess which was confirmed by ¹H NMR and by the synthesis of corresponding isotactic and semicrystalline homopolyesters. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2586–2597     

Polymerization via the Ugi‐reaction using aromatic monomers

The highly modular Ugi four‐component reaction (Ugi‐4CR) was used to directly obtain polymers of high molar mass bearing aromatic residues in the backbone. By using at least two bifunctional monomers, the Ugi‐4CR can be employed to synthesize polymers through a polycondensation under mild conditions in the absence of catalysts. This highly versatile approach allows the creation of vast libraries of molecules by a comparably small pool of compounds. We investigated the six different possible types of the Ugi four‐component polymerization (Ugi‐4CP) to generate polyamides using commercially available monomers without further purification. After substantial adjustments of reaction parameters, we were able to obtain a polymer of high molar mass, albeit only for one out of the six types of the Ugi‐4CP. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1680–1686     

Novel hyperbranched polymers synthesized via A3 + B(B′) approach by radical addition‐coupling polymerization

In this study, a novel application of radical addition‐coupling polymerization (RACP) for synthesis of hyperbranched polymers is reported. By Cu/PMDETA‐mediated RACP of 2‐methyl‐2‐nitrosopropane with trimethylolpropane tris(2‐bromopropionate) or a bromo‐ended 3‐arm PS macromonomer, two types of hyperbranched polymers with high degree of polymerization are synthesized under mild conditions, respectively. The chemical structures of the hyperbranched polymers are carefully characterized. By selective degradations of the ester groups and weak bonds of NO? C in the polymers, high degree of alternative connection of the two monomers in the synthesized polymers have been identified. Based on the experimental results, mechanism of formation of the hyperbranched polymer is proposed, which includes formation of carbon radicals from the tribromo monomer through single electron transfer, its capture by 2‐methyl‐2‐nitrosopropane that results in nitroxide radical, and cross‐coupling reaction of the nitroxide radical with other carbon radicals. Hyperbranched polymer can be formed in a step‐growth mode after multiple steps of such reactions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 904–913     

Aza‐Michael addition reaction: Post‐polymerization modification and preparation of PEI/PEG‐based polyester hydrogels from enzymatically synthesized reactive polymers

The utility of aza‐Michael addition chemistry for post‐polymerization functionalization of enzymatically prepared polyesters is established. For this, itaconate ester and oligoethylene glycol are selected as monomers. A Candida Antarctica lipase B catalyzed polycondensation reaction between the two monomers provides the polyesters, which carry an activated carbon‐carbon double bond in the polymer backbone. These electron deficient alkenes represent suitable aza‐Michael acceptors and can be engaged in a nucleophilic addition reaction with small molecular mono‐amines (aza‐Michael donors) to yield functionalized linear polyesters. Employing a poly‐amine as the aza‐Michael donor, on the other hand, results in the formation of hydrophilic polymer networks. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 745–749     

Synthesis and characterization of hyperbranched amphiphilic block copolymers prepared via self‐condensing RAFT polymerization

Four families of hyperbranched amphiphilic block copolymers of styrene (Sty, less polar monomer) and 2‐vinylpyridine (2VPy, one of the two more polar monomers) or 4‐vinylpyridine (4VPy, the other polar monomer) were prepared via self‐condensing vinyl reversible addition‐fragmentation chain transfer polymerization (SCVP‐RAFT). Two families contained 4VPy as the more polar monomer, one of which possessing a Sty‐b‐4VPy architecture, and the other possessing the reverse block architecture. The other two families bore 2VPy as the more polar monomer and had either a 2VPy‐b‐Sty or a Sty‐b‐2VPy architecture. Characterization of the hyperbranched block copolymers in terms of their molecular weights and compositions indicated better control when the VPy monomers were polymerized first. Control over the molecular weights of the hyperbranched copolymers was also confirmed with the aminolysis of the dithioester moiety at the branching points to produce linear polymers with number‐average molecular weights slightly greater than the theoretically expected ones, due to recombination of the resulting thiol‐terminated linear polymers. The amphiphilicity of the hyperbranched copolymers led to their self‐assembly in selective solvents, which was probed using atomic force microscopy and dynamic light scattering, which indicated the formation of large spherical micelles of uniform diameter. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1310–1319     

Adding magnetic ionic liquid monomers to the emulsion polymerization tool‐box: Towards polymer latexes and coatings with new properties

Magnetic ionic liquid monomers were synthesized and then polymerized to get magnetic polymer latexes and films. First, a series of 1‐vinyl‐3‐dodecyl‐imidazolium monomers having metal halides counter‐anions such as FeCl₃Br^?, CoCl₂Br^?, and MnCl₂Br^? were synthesized. These ionic liquid monomers were first homopolymerized to lead to magnetic poly(ionic liquids) and characterized. Secondly, magnetic latexes were synthesized by using the magnetic ionic liquids as surfmers (surfactant + monomer) in the emulsion polymerization of methyl methacrylate/n‐butyl acrylate. It was found that the powders obtained by freeze‐drying the latexes presented a paramagnetic behavior with weak antiferromagnetic interactions between the adjacent metal ions. Although the ratio of magnetic ionic liquid/monomer was only 2% these poly(methyl methacrylate‐co‐butyl acrylate) powders and latexes responded to a magnetic field due to the surfmer paramagnetic nature. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1145–1152     

Synthesis of biodegradable conjugated polymers with controlled backbone flexibility

A series of flexible, highly bright fluorescent poly(p‐phenyleneethynylene)s (PPEs) was prepared by employing a disulfide containing nonconjugated monomer at various ratios under Sonogashira reaction conditions. PPEs with flexible linkers exhibited fluorescence properties comparable to those of a fully conjugated PPE when less than 50% of flexible monomers were incorporated into the backbone. To evaluate the self‐assembly properties of PPEs, a series of conjugated polymer nanoparticles (CPNs) was fabricated by treating PPEs with organic acids followed by dialysis. CPNs containing linkers exhibited different complexation behavior with polysaccharides, warranting further investigation into how flexibility and biodegradability of CPNs influence their cellular interaction and entry. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1403–1412     

Redox initiated cationic polymerization of oxetanes

3,3‐Disubstituted oxetane monomers were found to undergo rapid, exothermic redox initiated cationic ring‐opening polymerization in the presence of a diaryliodonium or triarylsulfonium salt oxidizing agent and a hydrosilane reducing agent. The redox reaction requires a noble metal complex as a catalyst and several potential catalysts were evaluated. The palladium complex, Cl₂(COD)Pd^II, was observed to provide good shelf life stability while, at the same time, affording high reactivity in the presence of a variety of hydrosilane reducing agents. A range of structurally diverse oxetane monomers undergo polymerization under redox cationic conditions. When a small amount of an alkylated epoxide was added as a “kick‐start” accelerator to these same oxetanes, the redox initiated cationic polymerizations were extraordinarily rapid owing to the marked reduction in the induction period. A mechanistic interpretation of these results is offered. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1854–1861     

Bifunctional benzoxazines: Synthesis and polymerization of resorcinol based single isomers

Aside from their outstanding properties such as thermal and chemical stability and excellent mechanical performance, benzoxazines suffer from high polymerization temperatures. Isomeric mixtures of bifunctional benzoxazines based on resorcinol proved already to be highly reactive monomers enabling polymerizations at lower temperatures. This contribution describes the polymerization behavior of single benzoxazine isomers and furthermore the influence of different substituents at the aniline moiety on the curing temperature. Single isomers of bifunctional benzoxazines are now accessible in a straightforward one‐pot synthesis starting from resorcinol and the appropriate N‐phenyl functionalized aniline component. The asymmetric benzoxazine monomers bearing no (R‐a: T_peak = 179 °C) or electron‐donating substituents in meta position to N (R‐3,5dma: T_peak = 183 °C) succeed in lowering the polymerization temperature. Additionally, the impact of several initiating systems was studied resulting in a decrease of the polymerization temperature for all studied resorcinol derived benzoxazine isomers (down to 144 °C). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1243–1251