共查询到20条相似文献,搜索用时 11 毫秒
1.
Wang Xinling Chen Jianjun Hong Ling Tang Xiaozhen 《Journal of Polymer Science.Polymer Physics》2001,39(19):2225-2230
A novel hyperbranched poly(glycidol) (HPG) was prepared and characterized. The synthesized HPG was used as a substrate of a polymer electrolyte. The ionic conductivity of a blend of HPG, polyurethane (PU), and salt was studied. The ionic conductivity of HPG/PU/LiClO4 was about 6.6 × 10?6 S · cm?1 at 20 °C and 6.3 × 10?4 S · cm?1 at 60 °C. The results indicated that HPG showed higher solubility for salt than linear polyether when both had the same [O]/[Li+] molar ratio. The main reason was that more cavities and a lower degree of chain entanglement in HPG resulted in a lower glass‐transition temperature and were beneficial for decreasing the aggregation of salt or enhancing the ionic conductivity. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2225–2230, 2001 相似文献
2.
Qing‐Fa Si Xin Wang Xiao‐Dong Fan Sheng‐Jie Wang 《Journal of polymer science. Part A, Polymer chemistry》2005,43(9):1883-1894
Two UV‐curable hyperbranched poly(siloxysilane)s ( I and III ) containing vinyl and allyl end groups were synthesized via polyhydrosilylation with methylbis(methylethylvinylsiloxy)silane and methylbis(dimethylallylsiloxy)silane monomers. A cationic UV‐curable hyperbranched polymer ( II‐Ep ) with epoxy end groups was prepared via the hydrosilylation of hyperbranched polymer II with Si? H terminated groups and glycidyl methacrylate, and II was also obtained via the polyhydrosilylation of AB2‐type monomer methylvinylbis(methylethylsiloxy)silane. All hydrosilylation reactions were catalyzed by Pt/C or chloroplatinic acid. Three AB2‐type monomers were synthesized via the hydrolysis of functional chlorosilane, which was prepared with Grignard reagents and dichlorosilane. The molecular structures of the polymers were characterized with 1H NMR, Fourier transform infrared, and gel permeation chromatography, and the UV‐curing behaviors of the polymers under different atmospheres and with different photoaccelerators were also investigated. The thermostability of uncured and cured polymers was examined with thermogravimetric analysis, and the data indicated that the orders of the onset decomposition temperatures for the cured polymers and the residue weights were as follows: III (380 °C) > I (320 °C) > II‐Ep (280 °C) and I (70.4%) > III (64.1%) > II‐Ep (60.9%), respectively. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1883–1894, 2005 相似文献
3.
Caiguo Gong Jean M. J. Frchet 《Journal of polymer science. Part A, Polymer chemistry》2000,38(16):2970-2978
Functionalized hyperbranched poly(siloxysilane)s have been prepared by hydrosilylation reactions involving the multiple silicon hydride (SiH) groups of the polymer to introduce other reactive groups such as epoxy, amine, and hydroxyl groups. The possible use of these modified polymers as novel crosslinking agents is discussed. The same hydrosilylation reaction is used to attach preformed linear poly(isobutylene) (PIB) or poly(ethylene oxide) (PEO) onto the hyperbranched polymer to afford unusual hyperbranched–linear star block copolymers. The PIB‐derived copolymer is shown to be very hydrophobic, whereas its PEO‐derived counterpart is amphiphilic. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2970–2978, 2000 相似文献
4.
Ling Hong Yanjun Cui Xinling Wang Xiaozhen Tang 《Journal of polymer science. Part A, Polymer chemistry》2002,40(3):344-350
A new method for the synthesis of hyperbranched polymers involving the use of ABx macromonomers containing linear units have been investigated. Two types of novel hyperbranched polyurethanes have been synthesized by a one‐pot approach. The structures of monomers and polymers were characterized by elemental analysis, 1H NMR, 13C NMR, Fourier transform infrared spectroscopy, gel permeation chromatography, and thermogravimetric analysis. The hyperbranched polymers have been proven to be extremely soluble in a wide range of solvents. Polymer electrolytes were prepared with hyperbranched polymer, linear polymer as the host, and lithium perchlorate (LiClO4) as the ion source. Analysis of the isotherm conductivity dependence of the ion concentration indicated that these hyperbranched polymers could function as a “solvent” for the lithium salt. The conductivity increased with the increasing concentration of hyperbranched polymers in the host polymer. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 344–350, 2002 相似文献
5.
Muhammad Waqas Ali Siyuan Cheng Jianhao Si Muhammad Siddiq Xiaodong Ye 《Journal of polymer science. Part A, Polymer chemistry》2019,57(19):2030-2037
Hyperbranched poly(2‐ethyl‐2‐oxazoline) was synthesized by a combination of cationic ring‐opening polymerization and the oxidation of thiol to disulfide groups. A three‐arm star poly(2‐ethyl‐2‐oxazoline) (PEtOx) was first synthesized using 1,3,5‐tris(bromomethyl) benzene as an initiator. The star PEtOx was end‐capped with potassium ethyl xanthate. Similarly, a linear PEtOx was synthesized and end‐capped with potassium ethyl xanthate using benzyl bromide as an initiator. Hyperbranched PEtOx was then obtained by in situ cleaving and subsequent oxidation of the star PEtOx and linear PEtOx mixture with n‐butylamine as both a cleaving agent and a base in tetrahydrofuran. The linear PEtOx was used to prevent the formation of gel. The hyperbranched PEtOx can be cleaved with dithiothreitol to trithiol and monothiol polymer. The hyperbranched PEtOx shows no remaining thiols using Ellman's assay. The resulting hyperbranched PEtOx was hydrolyzed to a novel hyperbranched polyethyleneimine with degradable disulfide linkages. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2030–2037 相似文献
6.
Thiyagarajan Shanmugam C. Sivakumar A. Sultan Nasar 《Journal of polymer science. Part A, Polymer chemistry》2008,46(16):5414-5430
Novel AB2‐type monomers such as 3,5‐bis(4‐methylolphenoxy)benzoic acid ( monomer 1 ), methyl 3,5‐bis(4‐methylolphenoxy) benzoate ( monomer 2 ), and 3,5‐bis(4‐methylolphenoxy)benzoyl chloride ( monomer 3 ) were synthesized. Solution polymerization and melt self‐polycondensation of these monomers yielded hydroxyl‐terminated hyperbranched aromatic poly(ether‐ester)s. The structure of these polymers was established using FTIR and 1H NMR spectroscopy. The molecular weights (Mw) of the polymers were found to vary from 2.0 × 103 to 1.49 × 104 depending on the polymerization techniques and the experimental conditions used. Suitable model compounds that mimic exactly the dendritic, linear, and terminal units present in the hyperbranched polymer were synthesized for the calculation of degree of branching (DB) and the values ranged from 52 to 93%. The thermal stability of the polymers was evaluated by thermogravimetric analysis, which showed no virtual weight loss up to 200 °C. The inherent viscosities of the polymers in DMF ranged from 0.010 to 0.120 dL/g. End‐group modification of the hyperbranched polymer was carried out with phenyl isocyanate, 4‐(decyloxy)benzoic acid and methyl red dye. The end‐capping groups were found to change the thermal properties of the polymers such as Tg. The optical properties of hyperbranched polymer and the dye‐capped hyperbranched polymer were investigated using ultraviolet‐absorption and fluorescence spectroscopy. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5414–5430, 2008 相似文献
7.
8.
Bing Yu Xuesong Jiang Guilin Yin Jie Yin 《Journal of polymer science. Part A, Polymer chemistry》2010,48(19):4252-4261
Multistimuli‐responsive hyperbranched poly(ether amine)s (hPEAs) were successfully synthesized through nucleophilic addition/ring‐opening reaction of commercial diglycidyl ether and amine via one‐pot synthesis. In aqueous solution, these hPEAs exhibited very sharp response to temperature, pH, and ionic strength, with well‐tunable cloud point (CP). Through changing the poly(ethylene oxide) (PEO) chain content of hPEAs, pH, and ionic strength, the CP could be adjustable from 35 to 100 °C, and increased with the increasing of PEO content, the decreasing of pH and ionic strength. The CP of hPEAs aqueous solution presents a linear relationship to the PEO content in pH range from 6.6 to 8.0. Dynamic light scattering (DLS) investigation indicated that these hPEAs dispersed in aqueous solution to form the stable nanomicelles, whose aggregation can be controlled by temperature, pH, and ionic strength. Moreover, the obtained hPEAs contain reactive amino groups in periphery and hydroxyl groups inside, which can be further functionalized. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4252–4261, 2010 相似文献
9.
Jorge F. J. Coelho Ana M. F. P. Silva Anatoliy V. Popov Virgil Percec Mariana V. Abreu Pedro M. O. F. Gonalves M. H. Gil 《Journal of polymer science. Part A, Polymer chemistry》2006,44(9):3001-3008
The synthesis of a block copolymer poly(vinyl chloride)‐b‐poly(n‐butyl acrylate)‐b‐poly(vinyl chloride) is reported. This new material was synthesized by single‐electron‐transfer/degenerative‐chain‐transfer‐mediated living radical polymerization (SET‐DTLRP) in two steps. First, a bifunctional macroinitiator of α,ω‐di(iodo)poly (butyl acrylate) [α,ω‐di(iodo)PBA] was synthesized by SET‐DTLRP in water at 25 °C. The macroinitiator was further reinitiated by SET‐DTLRP, leading to the formation of the desired product. This ABA block copolymer was synthesized with high initiator efficiency. The kinetics of the copolymerization reaction was studied for two PBA macroinitiators with number–average molecular weight of 10 k and 20 k. The relationship between the conversion and the number–average molecular weight was found to be linear. The dynamic mechanical thermal analysis suggests just one phase, indicating that copolymer behaves as a single material with no phase separation. This methodology provides the access to several block copolymers and other complex architectures that result from combinations of thermoplastics (PVC) and elastomers (PBA). From industrial standpoint, this process is attractive, because of easy experimental setup and the environmental friendly reaction medium. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3001–3008, 2006 相似文献
10.
Yoshinori Nakano Eriko Sato Akikazu Matsumoto 《Journal of polymer science. Part A, Polymer chemistry》2014,52(20):2899-2910
We prepared the sequence‐controlled block copolymers including poly(1‐adamantyl acrylate) (PAdA) and poly(n‐butyl acrylate) sequences as the hard and soft segments, respectively, by the organotellurium‐mediated living radical polymerization. The thermal, optical, and mechanical properties of the adamantane‐containing block copolymers with polar 2‐hydroxyethyl acrylate (HEA) and acrylic acid (AA) repeating units were investigated. The microphase‐separated structures of the block copolymers were confirmed by the differential scanning calorimetry and atomic force microscopy observations as well as dynamic mechanical measurements. The α‐ and β‐dispersions due to the main‐chain and side group molecular motions, respectively, of the hard and soft segments were observed. Their transition temperatures and activation energies increased due to the formation of intermolecular hydrogen bonding by the introduction of the HEA and AA repeating units. The effects of the hydrogen bonding on their tensile elasticity, strength, and strain were also evaluated. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2899–2910 相似文献
11.
Jong‐Beom Baek Frank W. Harris 《Journal of polymer science. Part A, Polymer chemistry》2004,42(24):6318-6330
A phenylquinoxaline (PQ) AB monomer mixture was treated with monofunctional and difunctional end‐capping agents and with and without a coupling agent to afford phenylethynyl‐terminated linear PQ oligomers. The resulting PQ oligomers were soluble in common organic solvents and had intrinsic viscosities (IVs) of 0.21–0.30 dL/g. The glass‐transition temperature (Tg) of the diphenylethynyl‐end‐capped PQ oligomer on both sides increased the most, from 215 °C (before curing) to 251 °C (after curing). The PQ AB2 monomer, which acted as both a coupling agent and a monomer for the hyperbranched polymer, was treated with an AB monomer and end‐capping agents to afford phenylethynyl‐terminated hyperbranched polyphenylquinoxalines (PPQs). They were also soluble in common organic solvents, had IVs of 1.00–1.65 dL/g and Tg's of 251–253 °C, and underwent exothermic cure with maxima around 412–442 °C. The Tg's of the cured hyperbranched PPQs ranged from 258 to 261 °C, depending on the number of phenylethynyl groups on the surface. After further curing, they displayed a Tg of 316 °C in one sample and turned into a fully crosslinked network. The dynamic melt viscosities of a linear oligomer (IV = 0.21 dL/g), a hyperbranched sample (IV = 1.00 dL/g), and a linear reference PPQ (IV = 1.29 dL/g) were compared with respect to the processing temperature. The PQ oligomer and hyperbranched PPQ had low melt viscosities. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6318–6330, 2004 相似文献
12.
Ralph Beckmann Uwe Beginn 《Journal of polymer science. Part A, Polymer chemistry》2013,51(17):3700-3715
Hyperbranched polyethyleneimine (hb‐PEI) is used as polymeric scaffold to synthesize new PEI‐g‐polymethylmethacrylate (PEI‐g‐PMMA) block copolymers, consisting of a hyperbranched, partially quarternized cationic core, and PMMA‐arms. The arms are grafted to the PEI scaffold by means of the “grafting to” method. Ammonium groups, covalently bond to the hyperbranched core, provide good adhesion to negatively charged surfaces, even in case of low‐surface charges. The PMMA strands provide compatibility of the macromolecules to PMMA matrices, hence generating potential dispersants, and compatibilizers for PMMA. A peculiar association behavior in organic solution is observed as supported by dynamic light scattering and DOSY measurements. First evidences of the applicability of the macromolecules as dispersants to prepare PMMA‐nanocomposites are given. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3700–3715 相似文献
13.
In‐Yup Jeon Loon‐Seng Tan Jong‐Beom Baek 《Journal of polymer science. Part A, Polymer chemistry》2009,47(13):3326-3336
Self‐controlled synthesis of hyperbranched poly(ether‐ketone)s (HPEKs) were prepared from “A2 + B3” approach by using different monomer solubility in reaction medium. 1,3,5‐Triphenoxybenzene as a hydrophobic B3 monomer was reacted with commercially available terephthalic acid or 4,4′‐oxybis(benzoic acid) as a hydrophilic A2 monomer in a hydrophilic reaction medium, polyphosphoric acid (PPA)/phosphorous pentoxide (P2O5). The resultant HPEKs were soluble in various common organic solvents and had the weight‐average molecular weight in the range of 3900–13,400 g/mol. The results implied that HPEKs were branched structures instead of crosslinked polymers. The molecular sizes and shapes of HPEKs were further assured by morphological investigation with scanning electron microscopy (SEM) and atomic force microscopy (AFM). Hence, the applied polymerization condition was indeed strong enough to efficiently facilitate polycondensation via “direct” Friedel‐Crafts reaction without gelation. It could be concluded that the polymer forming reaction was kinetically controlled by automatic and slow feeding of the hydrophobic B3 monomer into the hydrophilic reaction mixture containing hydrophilic comonomer. As a result, hyperbranched structures were formed instead of crosslinked polymers even at full conversion (equifunctional monomer feed ratio). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3326–3336, 2009 相似文献
14.
Huan‐Bing Wang Xue‐Si Chen Cai‐Yuan Pan 《Journal of polymer science. Part A, Polymer chemistry》2008,46(4):1388-1401
Novel star‐like hyperbranched polymers with amphiphilic arms were synthesized via three steps. Hyperbranched poly(amido amine)s containing secondary amine and hydroxyl groups were successfully synthesized via Michael addition polymerization of triacrylamide (TT) and 3‐amino‐1,2‐propanediol (APD) with feed molar ratio of 1:2. 1H, 13C, and HSQC NMR techniques were used to clarify polymerization mechanism and the structures of the resultant hyperbranched polymers. Methoxyl poly(ethylene oxide) acrylate (A‐MPEO) and carboxylic acid‐terminated poly(ε‐caprolactone) (PCL) were sequentially reacted with secondary amine and hydroxyl group, and the core–shell structures with poly(1TT‐2APD) as core and two distinguishing polymer chains, PEO and PCL, as shell were constructed. The star‐like hyperbranched polymers have different sizes in dimethyl sulfonate, chloroform, and deionized water, which were characterized by DLS and 1H NMR. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1388–1401, 2008 相似文献
15.
《Journal of polymer science. Part A, Polymer chemistry》2018,56(1):9-15
Solvent‐free isothermal tuning of viscoelasticity of polymer materials is important for an emerging photochemical molding technology and photoreversible adhesives. In this study we designed a four‐armed star‐shaped poly(butyl acrylate, BA) oligomer having four coumarin end groups. The irradiation of UV at the wavelength of 365 nm (UV365) to the viscous poly(BA) oligomer under a solvent‐free condition produced a solid network material along with the progress of dimerization reaction with coumarin end groups. The subsequent irradiation of UV at the wavelength of 254 nm (UV254) caused dimer dissociation reaction to attain change in the mixing degree of star and network architectures in the material. Moreover, viscoelasticity of the network material was tunable by repetitive UV365 and UV254 irradiations. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 9–15 相似文献
16.
Long‐subchain hyperbranched poly(aminoethyl acrylate): A potent antimicrobial polymer with low hemolytic toxicity
下载免费PDF全文
![点击此处可从《Journal of polymer science. Part A, Polymer chemistry》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Chen He Peng‐Yun Li Xiao‐Xia Lu Jia‐Min Li Hui‐Juan Li Wei‐Dong He Lihua Yang 《Journal of polymer science. Part A, Polymer chemistry》2016,54(21):3462-3469
The emergency of antibiotic‐resistant bacteria and their wide spread has posed a worldwide threat to public health, and traditional antibiotics are gradually overwhelmed by infectious bacteria. Herein, we report an efficient and economical strategy to construct antimicrobial polymers with net cationic component and hyperbranched architecture, which exhibit highly selective toxicity toward bacteria over human cells. To this aim, cationic poly(aminoethyl acrylate) (PAEA) without hydrophobicity is chosen for low hemolysis activity and targeting the negative bacterial membranes, and hyperbranched architecture is introduced to solve the dilemma of low antimicrobial activity. Long‐subchain hyperbranched PAEA (lhb‐PAEA) samples kills >99.99% gram‐negative Escherichia coli and >98% gram‐positive Staphylococcu aureus at the dose of ≤4 μg/mL. Moreover, lhb‐PAEA samples exhibit great biocompatibility, for the hemolysis percentage was ≤35% even at the high dose of 1024 μg/mL. Thus, enhanced antimicrobial activity, reduced hemolytic toxicity, the feasible and low‐cost production are achieved for lhb‐PAEA as antimicrobial agents. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3462–3469 相似文献
17.
Agnieszka Kowalczuk Annelies Vandendriessche Barbara Trzebicka Barbara Mendrek Urszula Szeluga Grzegorz Cholewiski Mario Smet Andrzej Dworak Wim Dehaen 《Journal of polymer science. Part A, Polymer chemistry》2009,47(4):1120-1135
Core‐shell type star polymers composed of poly(tert‐butyl acrylate) (poly(t‐BuA)) arms and 100% hyperbranched poly(arylene‐oxindole) interiors were synthesized via the “core‐first” method. Atom transfer radical polymerization of t‐BuA initiated by 2‐bromopropionyl terminal groups of the hyperbranched core was applied for the synthesis of the stars. The resultant star structures were characterized by gel permeation chromatography with triple detection. Polymers of molar masses Mn up to 1.68 × 105 g/mol were obtained. The obtained star polymers compared with the linear counterparts of the same molar mass have a much more compact structure in solution. The intrinsic viscosities of the stars are also significantly lower than their linear counterparts. Light scattering experiments were performed to provide information about the size of these macromolecules in solution. Preliminary characterization of the thermal properties of these novel materials is also reported. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1120–1135, 2009 相似文献
18.
Supramolecular network polymers formed from polyamidine and carboxy‐terminated telechelic poly(n‐butyl acrylate) via amidinium‐carboxylate salt bridges
下载免费PDF全文
![点击此处可从《Journal of polymer science. Part A, Polymer chemistry》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Yoshio Furusho Takeshi Endo Keiko Higaki Katsuhiro Kaetsu Yuji Higaki Ken Kojio Atsushi Takahara 《Journal of polymer science. Part A, Polymer chemistry》2016,54(14):2148-2155
We have prepared the amidinium‐carboxylate salt bridge‐based supramolecular network polymers from a carboxy‐terminated telechelic poly(n‐butyl acrylate) and a linear polyamidine having N,N′‐di‐substituted acetamidine group in the main chain. FTIR measurements indicated that the salt bridge was attributed to the three‐dimensional network formation. Virtually, no fluidity was observed for the blend containing equimolar amounts of the carboxyl group and the amidine group, which showed a high G′ value of about 1 MPa at ?5 °C. For comparison, the supramolecular network polymers crosslinked by ammonium‐carboxylate salt were prepared using a linear polyethyleneimine instead of the polyamidine. The blend with equimolar amounts of the carboxyl group and the secondary amino group showed liquid‐like fluidity with a G′ value of about 0.01 MPa at ?5 °C, which was attributed to the fact that a certain amount of the carboxyl group remained as its free form, as evidenced by FTIR analysis. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2148–2155 相似文献
19.
The properties and morphologies of UV‐cured epoxy acrylate (EB600) blend films containing hyperbranched polyurethane acrylate (HUA)/hyperbranched polyester (HPE) were investigated. A small amount of HUA added to EB600 improved both the tensile strength and elongation at break without damaging its storage modulus (E′). The highest tensile strength of 31.9 MPa and an elongation at break around two times that of cured pure EB600 were obtained for the EB600‐based film blended with 10% HUA. Its log E′ (MPa) value was measured to be 9.48, that is, about 98% of that of the cured EB600 film. The impact strength and critical stress intensity factor (K1c) of the blends were investigated. A 10 wt % HUA content led to a K1c value 1.75 times that of the neat EB600 resin, and the impact strength of the EB600/HPE blends increased from 0.84 to 0.95 kJ m?1 with only 5 wt % HPE addition. The toughening effects of HUA and HPE on EB600 were demonstrated by scanning electron microscopy photographs of the fracture surfaces of films. Moreover, for the toughening mechanism of HPE to EB600, it was suggested that the HPE particles, as a second phase in the cured EB600 film, were deformed in a cold drawing, which was caused by the difference between the elastic moduli of HPE and EB600. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3159–3170, 2005 相似文献
20.
Wenjun Du Yali Li Andreas M. Nyström Chong Cheng Karen L. Wooley 《Journal of polymer science. Part A, Polymer chemistry》2010,48(15):3487-3496
Complex amphiphilic polymers were synthesized via core‐first polymerization followed by alkylation‐based grafting of poly(ethylene oxide) (PEO). Inimer 1‐(4′‐(bromomethyl)benzyloxy)‐2,3,5,6‐tetrafluoro‐4‐vinylbenzene was synthesized and subjected to atom transfer radical self‐condensing vinyl polymerization to afford hyperbranched fluoropolymer (HBFP) as the hydrophobic core component with a number‐averaged molecular weight of 29 kDa and polydispersity index of 2.1. The alkyl halide chain ends on the HBFP were allowed to undergo reaction with monomethoxy‐terminated poly(ethylene oxide) amine (PEOx‐NH2) at different grafting numbers and PEO chain lengths to afford PEO‐functionalized HBFPs [(PEOx)y‐HBFPs], with x = 15 while y = 16, 22, or 29, x = 44 while y = 16, and x = 112 while y = 16. The amphiphilic, grafted block copolymers were found to aggregate in aqueous solution to give micelles with number‐averaged diameters (Dav) of 12–28 nm, as measured by transmission electron microscopy (TEM). An increase of the PEO:HBFP ratio, by increase in either the grafting densities (y values) or the chain lengths (x values), led to decreased TEM‐measured diameters. These complex, amphiphilic (PEOx)y‐HBFPs, with tunable sizes, might find potential applications as nanoscopic biomedical devices, such as drug delivery vehicles and 19F magnetic resonance imaging agents. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3487–3496, 2010 相似文献