Synthesis and characterization of chiral poly(l‐lactide‐b‐hexyl isocyanate) macromonomers with norbornenyl end groups and their homopolymerization through ring opening metathesis polymerization to afford polymer brushes

We report the synthesis of the novel half‐titanocene alkoxide complex bischloro‐η⁵‐cyclopentadienyl(bicyclo[2.2.1]‐hept‐5‐en‐2‐oxy) titanium (IV), [CpTiCl₂(O‐NBE)]. This complex was employed for the synthesis of chiral poly(l ‐lactide‐b‐hexyl isocyanate) diblock copolymer bearing a norbornene end group with sequential addition of monomers. The poly(hexyl isocyanate) block is chiral due to the last l ‐lactide unit of the poly(l ‐lactide) block. This macromonomer was polymerized towards a chiral polymer brush structure with polynorbornene backbone and chiral poly(l ‐lactide‐b‐hexyl isocyanate) side chains using Grubbs first‐generation catalyst. The polymers were characterized using size exclusion chromatography (SEC), nuclear magnetic resonance (NMR), and circular dichroism (CD) spectroscopy and their thermal properties were investigated by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) analysis. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1102–1112     

Polymerization of n‐hexyl isocyanate with CpTiCl2(OR) (R = functional group or macromolecular chain): A route to ω‐functionalized and block copolymers and terpolymers of n‐hexyl isocyanate

Well‐defined ω‐cholesteryl poly(n‐hexyl isocyanate) (PHIC–Chol), as well as diblock copolymers of n‐hexyl isocyanate (HIC) with styrene, PS‐b‐PHIC [PS = polystyrene; PHIC = poly(n‐hexyl isocyanate)], and triblock terpolymers with styrene and isoprene, PS‐b‐PI‐b‐PHIC and PI‐b‐PS‐b‐PHIC (PI = polyisoprene), were synthesized with CpTiCl₂(OR) (R = cholesteryl group, PS, or PS‐b‐PI) complexes. The synthetic strategy involved the reaction of the precursor complex CpTiCl₃ with cholesterol or the suitable ω‐hydroxy homopolymer or block copolymer, followed by the polymerization of HIC. The ω‐hydroxy polymers were prepared by the anionic polymerization of the corresponding monomers and the reaction of the living chains with ethylene oxide. The reaction sequence was monitored by size exclusion chromatography, and the final products were characterized by size exclusion chromatography (light scattering and refractive‐index detectors), nuclear magnetic resonance spectroscopy, and, in the case of PHIC–Chol, differential scanning calorimetry. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6503–6514, 2005     

Enolate anionic initiator,sodium deoxybenzoin,for leading living natures by formation of aggregators at the growth chain ends

The living anionic polymerization of n‐hexyl isocyanate (HIC) using a newly developed initiator forming metal–enolate complex, sodium deoxybenzoin (Na‐DB), is reported. For the polymerization of HIC, Na‐DB serves the dual functions of providing controlled fast initiation and efficiently protecting the living chain ends. The use of Na‐DB has resulted in quantitative polymer yields (～100%), effective control of the polymer's molecular weights, and low polydispersity index. To examine the living nature of poly(n‐hexyl isocyanate) (PHIC), block copolymerization of HIC with another isocyanate monomer, 3‐(triethoxysilyl)propyl isocyanate (TESPI), was carried out. The resulting block copolymer, poly(n‐hexyl isocyanate)‐b‐poly(3‐(triethoxysilyl)propyl isocyanate) (PHIC‐b‐PTESPI) was synthesized successfully via living anionic polymerization using Na‐DB with quantitative yield and controlled molecular weight. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis of optically active polymers containing chiral phosphorus atoms in the main chain

We successfully synthesized optically active polymers by using a chiral bisphosphine, (S,S)‐1,2‐bis[boranato(t‐butyl)methylphosphino]ethane, as a key building block. Their structures were characterized with ¹H, ¹³C, and ³¹P NMR spectra. The obtained polymers exhibited different glass‐transition temperatures depending on the structure of each comonomer, whereas a model compound had a melting point. According to circular dichroism spectra, the difference in the stereochemistry of the comonomers yielded the different higher‐ordered structures of the polymers induced by chiral phosphine units. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 866–872, 2007     

Preparation and characterization of optically active polymers containing pendent and terminal chiral units via atom transfer radical polymerization

Optically active homopolymers and copolymers, bearing chiral units at the side chain and end chain, were prepared via atom transfer radical polymerization (ATRP) techniques. The well‐defined optically active polymers were obtained via the ATRP of pregnenolone methacrylate (PR‐MA), β‐cholestanol acrylate (CH‐A), and 20‐(hydroxymethyl)‐pregna‐1,4‐dien‐3‐one acrylate (HPD‐A) with ethyl 2‐bromopropionate as the initiator and CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine as the catalytic system. The experimental results showed that the polymerizations of PR‐MA, CH‐A, and HPD‐A proceeded in a living fashion, providing pendent chiral group polymers with low molecular weight distributions and predetermined molecular weights that increased linearly with the monomer conversion. Furthermore, the copolymers poly(pregnenolone methacrylate)‐b‐poly[(dimethylamino)ethyl methacrylate] and poly(pregnenolone methacrylate‐co‐methyl methacrylate) were synthesized and characterized with ¹H NMR, transmission electron microscopy, and polarimetric analysis. In addition, when optically active initiators estrone 2‐bromopropionate and 20‐(hydroxymethyl)‐pregna‐1,4‐dien‐3‐one 2‐bromopropionate were used for ATRPs of methyl methacrylate and styrene, terminal optically active poly(methyl methacrylate) and polystyrene were obtained. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1502–1513, 2006     

Generation of highly stable amidate anion in anionic polymerization of 3‐(triethylsilyl)propyl isocyanate

To study living anionic polymerization, 3‐(triethylsilyl)propyl isocyanate (TEtSPI) monomer was synthesized by hydrosilylation of allylamine with triethylsilane and treatment of the resulting amine with triphosgene. The polymerization of TEtSPI was performed with sodium naphthalenide (Na‐Naph) as an initiator and in the absence and presence of sodium tetraphenylborate (NaBPh₄) as an additive in tetrahydrofuran (THF) at ?78 and at ?98 °C. A highly stabilized amidate anion for living polymerization of isocyanates was generated for the first time with the combined effect of the bulky substituent and the shielding action of the additive NaBPh₄, extending the living character at least up to 120 min at ?98 °C. Even the anion could exist at ?78 °C for 10 min. A block copolymer, poly(n‐hexyl isocyanate)‐b‐poly[(3‐triethylsilyl)propyl isocyanate]‐b‐poly(n‐hexyl isocyanate), was synthesized with quantitative yields and controlled molecular weights via living anionic polymerization in THF at ?78 °C for TEtSPI and ?98 °C for n‐hexyl isocyanate, respectively, with Na‐Naph with three times of NaBPh₄ as a common ion salt. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 933–940, 2004     

Asymmetric polymerization of N‐substituted maleimides with chiral oxazolidine–organolithium

Asymmetric anionic homopolymerizations of achiral N‐substituted maleimides (RMI) were performed with lithium 4‐alkyl‐2,2‐dialkyloxazolidinylamide. All obtained polymers were optically active, exhibiting opposite optical rotation to that of a corresponding oxazolidinyl group at the terminal of the main chain. This suggests that opposite optical rotation to the corresponding chiral oxazolidine was induced to the polymer main chain. In the polymerization using a fluorenyllithium (FlLi)–oxazolidine complex, the obtained polymer with a fluorenyl group at the polymer end showed a negative specific rotation. This also suggests that asymmetric induction took place in the polymer main chain. The asymmetric induction was supported by the circular dichroism (CD) and GPC analysis with polarimetric detector. Optical activity of the polymer was attributed to different contents of (S,S) and (R,R) structures formed from threo‐diisotactic additions, as supported by the ¹³C‐NMR spectra of the polymers and the model compounds. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 473–482, 1999     

Radical polymerization of novel N‐substituted‐N‐vinylformamide derivatives with bulky chiral substitutents

A series of novel N‐substituted‐N‐vinylformamides were synthesized, and the effect of bulky substituents on their radical polymerizability and polymer structure were investigated. N‐(p‐Methoxybenzyl)‐N‐vinylformamide ( 3 ) and N‐cyclohexylmethyl‐N‐vinylformamide ( 4 ) generated polymers, while it was known that their N‐vinylacetamide derivatives did not. ¹H NMR and ¹³C NMR analyses of poly( 3 ), however, revealed almost no difference among the various polymerization conditions, implying that the substituent bulkiness did not influence the polymer structures. On the other hand, the chiral polymers, which were obtained by the radical polymerization of N‐(S)‐2‐methylbutyl‐N‐vinylformamide ((S)‐ 5 ) and N‐(S)‐2,3‐dihydroxypropyl‐N‐vinylformamide ((S)‐ 7 ) at 0 °C, showed sharper spectral patterns than those obtained at higher polymerization temperatures. Furthermore, the intensities of their positive cotton effects on circular dichroism increased when the polymerization temperature was low, suggesting that the substituent bulkiness of (S)‐ 5 and (S)‐ 7 influenced the polymer structures, such as their stereoregularity and regioregularity. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Chiral sensing of Eu(III)‐containing achiral polymer complex from chiral amino acids coordination induction

The β‐diketonate‐based achiral polymer P‐1 could be synthesized by the polymerization of 3,7‐dibromo‐2,8‐dimethoxy‐5,5‐dioctyl‐5H‐dibenzo[b,d]silole ( M1 ) with (Z)?1,3‐bis(4‐ethynylphenyl)?3‐hydroxyprop‐en‐1‐one ( M2 ) via typical Sonogashira coupling reaction. The β‐diketonate unit in the main chain backbone of P‐1 can further coordinate with Eu(TTA)_x [TTA^? = 4,4,4‐trifluoro‐1‐(thiophen‐2‐yl)butane‐1,3‐dionate anion, X = 1, 2, 3] to afford corresponding Eu(III)‐containing polymer complexes. The resulting achiral polymer complex P‐2 (X = 2) can exhibit strong circular dichroism (CD) response toward both N‐Boc‐l and d‐ proline enantiomers. The CD signal was preliminarily attributed to coordination induction between chiral N‐Boc‐proline and the Eu(III) complex moiety. The linear regression analysis of CD sensing shows a good agreement between the magnitude of molar ellipticity and concentration of chiral N‐Boc‐l or d‐ proline, which indicates this kind Eu(III)‐containing achiral polymer complex can be used as a chiral probe for enantioselective recognition of N‐Boc‐l or d‐ proline enantiomers based on Cotton effect of CD spectra. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3080–3086     

Synthesis of diisocyanides with phenolic groups and their polymerization to helically chiral poly(quinoxaline‐2,3‐diyl)s

The development of synthetic routes which lead to five new diisocyanide monomers with one or two phenolic groups is described. Their polymerization behavior is studied with Pd‐ and Ni‐based initiators, as well as under microwave irradiation. The polymerizability is mainly dominated by steric effects as is concluded from experiments using different protecting groups. Chiroptical properties of these new polymers are studied by CD‐spectroscopy. After deprotection, helically chiral poly(quinoxalin‐2,3‐diyl)s are obtained which display a Brønsted function attached to a stereolabile biaryl axis whose configuration should be influenced by the chiral polymer backbone. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1320–1329     

Synthesis of conjugated polymers with azobenzene moieties in the main chain

Poly(phenylenevinylene)‐based conjugated polymers with azobenzene groups in the main chains were prepared by the Pd‐catalyzed coupling polymerization of divinylarenes with dihaloarenes. The Pd‐catalyzed coupling polymerization of 4,4′‐divinylazobenzene with dihaloarenes such as 1,3‐dibromobenzene, 1,4‐dibromo‐2,5‐dihexylbenzene, 4,4′‐dibromoazobenzene, and 4,4′‐diiodoazobenzene resulted in polymers with poor solubility. In contrast, soluble polymers containing azobenzene moieties in the main chains were attainable from divinylbenzenes with 4,4′‐dihaloazobenzenes if either or both of the monomers possessed hexyl groups on the aromatic rings. The number‐average molecular weight of the polymer exceeded 10,000 under optimized conditions, and the polymer showed a remarkably redshifted absorption in the visible region (456 nm). ¹H NMR and IR spectra supported that the polymers having only trans‐geometry for the double bonds. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1057–1063, 2000     

Synthesis and characterization of chiral polymer complexes incorporating polybinaphthyls,bipyridine, and Eu(III)

Chiral conjugated polymers P‐1 and P‐2 were synthesized by the polymerization of (S)‐3,3′‐diiodo‐2,2′‐bisbutoxy‐1,1′‐binaphthyl and (S)‐6,6′‐dibromo‐2,2′‐bisbutoxy‐1,1′‐binaphthyl, respectively, with 5,5′‐divinyl‐2,2′‐bipyridine through a Heck cross‐coupling reaction. Chiral polymer complexes P‐C‐1 and P‐C‐2 were obtained by the bipyridine chelating coordination of P‐1 and P‐2 with Eu(TTA)₃·2H₂O (where TTA is 2‐thenoyltrifluoroacetonate). Polymers P‐1 and P‐2 and polymer complexes P‐C‐1 and P‐C‐2 exhibited intense circular dichroism signals, with negative and positive Cotton effects in their circular dichroism spectra. The chiral polymers showed strong green‐blue fluorescence because of the efficient energy migration from the extended π‐electronic structure of the conjugated polymer main to the chiral binaphthyl core. The chiral polymer complexes could have not only polymer fluorescence but also the characteristic fluorescence of Eu(III) (⁵D₀→⁷F₂) at a different excited wavelength. These kinds of chiral polymer complexes incorporating polybinaphthyls, bipyridine, and Eu(III) moieties are expected to provide an understanding of the relationship between the structure and properties of chiral polymer complexes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 650–660, 2007     

Lanthanoid isopropoxide as a novel initiator for anionic polymerization of isocyanates

Lanthanum isopropoxide was found to serve as a novel anionic initiator for the polymerization of hexyl isocyanate affording poly(hexyl isocyanate) with very high molecular weight (M _n > 10⁶) under appropriate conditions. Other lanthanoid alkoxides, such as samarium, ytterbium and yttrium isopropoxides, also brought about the polymerization of hexyl isocyanate. Butyl, isobutyl, octyl and m-tolyl isocyanates also underwent the polymerization reaction to form the corresponding polymers by using lanthanum isopropoxide as initiator, while polymerizations of tert-butyl and cyclohexyl isocyanates with lanthanum isopropoxide did not occur under identical conditions.     

Syntheses and polymerizations of novel chiral poly(acrylamide) macromonomers and their chiral recognition abilities

Chiral poly(acrylamide) macromonomers (PMB‐1, PMB‐2, PPAE‐1, and PPAE‐2) were synthesized from 2‐methacryloyloxyethyl isocyanate and prepolymers, that is, poly[(S)‐methylbenzyl acrylamide] or poly(L ‐phenylalanine ethylester acrylamide with a terminal carboxylic acid or hydroxy group. Radical homopolymerizations of poly(acrylamide) macromonomers were carried out under several conditions to obtain the corresponding optically active polymers. A strong temperature dependence on the specific optical rotation was observed for poly(PPAE‐2) in comparison with that for the corresponding prepolymer. This might have resulted from a change in the conformation caused by hydrogen bonds between polymer‐graft branches in the polymacromonomer. Radical copolymerizations of poly(acrylamide) macromonomers with styrene and methyl methacrylate were performed with azobisisobutyronitrile in tetrahydrofuran at 60 °C. Chiroptical properties of the copolymers were slightly influenced by comonomer units. Chiral stationary phases were prepared by the radical polymerization of poly(acrylamide) macromonomers in the presence of silica gel containing vinyl groups on the surface. Some racemic compounds such as menthol and mandelic acid were resolved on the chiral stationary phases for high‐performance liquid chromatography. The conformation based on hydrogen bonds between polymer‐graft branches in the polymacromonomers may play an important role in chiral discrimination. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1726–1741, 2002     

New chiral [N,N,N]‐ligand containing titanium/zirconium precatalysts for 1‐hexene polymerization

The ring‐opening reaction of (S)‐N‐tosyl‐2‐phenylaziridine by benzylamine in ethanol at 80 °C resulted in the formation of the (S,S)‐bis(N‐tosyl‐2‐amino‐2‐phenylethyl)benzylamine ligand in a 60% yield. The corresponding titanium complex, 1‐TiCl₂, was prepared by the reaction of the dilithiated parent ligand with TiCl₄. This precatalyst, in combination with methylaluminoxane, was capable of polymerizing 1‐hexene with good activities, resulting in the formation of good yields of low‐dispersity, high‐molecular‐weight polymers at low temperatures but higher yields of lower molecular weight polymers at higher temperatures. ¹H and ¹³C NMR spectra of the polymers suggested high isotacticity and predominant chain termination via β‐hydride elimination. The enantiomerically pure catalysts, (R,R)‐1‐TiCl₂ and (S,S)‐1‐TiCl₂, showed nearly identical polymerization results at various polymerization temperatures. However, when the catalyst was prepared from a racemic ligand, the obtained polymers had lower molecular weights with a bimodal distribution. This observation suggested diastereomeric aggregation of the racemic catalyst, which was well supported by the NMR studies, and a modified Arrhenius plot (the natural logarithm of the number‐average molecular weight vs the reciprocal of the temperature) also showed sigmoidal behavior, indicating the existence of two or more active species. Analogous zirconium precatalysts showed similar results in the polymerization of 1‐hexene. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4006–4014, 2006     

Phenothiazine‐S,S‐dioxide‐ and fluorene‐based light‐emitting polymers: Introduction of e−‐deficient S,S‐dioxide into e−‐rich phenothiazine

A novel series of poly(10‐hexyl‐phenothiazine‐S,S‐dioxide‐3,7‐diyl) and poly(9,9′‐dioctyl‐fluorene‐2,7‐diyl‐alt‐10‐hexyl‐3,7‐phenothiazine‐S,S‐dioxide) (PFPTZ‐SS) compounds were synthesized through Ni(0)‐mediated Yamamoto polymerization and Pd(II)‐catalyzed Suzuki polymerization. The synthesized polymers were characterized by ¹H NMR spectroscopy and elemental analysis and showed higher glass transition temperatures than that of pristine polyfluorene. In terms of photoluminescence (PL), the PFPTZ‐SS compounds were highly fluorescent with bright blue emissions in the solid state. Light‐emitting devices were fabricated with these polymers in an indium tin oxide/poly(3,4‐ethylene dioxythiophene):poly(styrene sulfonate)/polymer/Ca/Al configuration. The electroluminescence (EL) of the copolymers differed from the PL characteristics: the EL device exhibited a redshifted greenish‐blue emission in contrast to the blue emission observed in the PL. Additionally, this unique phenothiazine‐S,S‐dioxide property, triggered by the introduction of an electron‐deficient SO₂ unit into the electron‐rich phenothiazine, gave rise to improvements in the brightness, maximum luminescence intensity, and quantum efficiency of the EL devices fabricated with PFPTZ‐SS. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1236–1246, 2007     

Toward the design of LPEI containing block copolymers: Improved synthesis protocol,selective hydrolysis,and detailed characterization

The synthesis of poly(2‐ethyl‐2‐oxazoline)‐b‐linear poly(ethylenimine) (PEtOx‐b‐LPEI) copolymers by selective basic hydrolysis of PEtOx‐b‐poly(2‐H‐2‐oxazoline) (PEtOx‐b‐PHOx) is described. For this purpose, an easy method for the preparation of the 2‐H‐2‐oxazoline (HOx) monomer was developed. Based on the microwave‐assisted polymerization kinetics for this monomer, PEtOx‐b‐PHOx copolymers were prepared. Subsequently, the block copolymers were selectively hydrolyzed to PEtOx‐b‐LPEI under basic conditions. The success of the polymerizations and subsequent post‐polymerization reactions was demonstrated by ¹H NMR spectroscopy and MALDI‐TOF‐MS investigations of the obtained polymers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Long range chirality transfer in free radical polymerization of vinylterphenyl monomers bearing chiral alkoxy groups

Two series of chiral bulky vinyl aromatics, 2‐(4'‐alkoxyphenyl)‐5‐(4'‐hexyloxyphenyl)styrene ( S‐Am (m = 0, 1, 2, 3)/ R‐A0 ) and 2‐(4'‐hexyloxyphenyl)‐5‐(4'‐alkoxyphenyl)styrene ( S‐Bm (m = 0, 1, 2, 3)/ R‐B0 ), were synthesized and radically polymerized (where m denotes the carbon number between stereogenic center and ether oxygen atom). The generation and stereomutation of helical structures as well as chirality transfer from the stereogenic center of the side‐group to the polymer backbone during polymerization were investigated by a combination of ¹H‐ and ¹³C‐NMR, polarimetry, circular dichroism spectroscopy, liquid crystal induced circular dichroism, and computer simulation. All the polymers, except S‐B3, display optical rotations and Cotton effects in the UV‐Vis absorption region of terphenyl pendant, which are quite different from the corresponding model compounds and monomers, suggesting the formation of chiral secondary structures, that is, skewed packing of side‐groups and twisting of polymer backbones with a dominant screw sense. The sign of optical rotation changes alternatively and the strength diminishes when m increases from 1 to 3. However, although the stereogenic centers in S‐A0 and S‐B0 are closer to the vinyl group than those in S‐A1 and S‐B1, separately, a weaker chiral induction power is observed. Moreover, optical rotations of polymers derived from S‐A0 / R‐A0 and S‐B0 / R‐B0 are opposite in sign and increase with annealing time in tetrahydrofuran. These results are in a sharp contrast with our previous findings in similar vinylterphenyl compounds, where ‐COO‐ rather than ‐O‐ links the chiral alkyl tail to the terphenyl group, manifesting a remarkable effect of small structural variation of side‐group on polymer chiroptical properties and complexity of chirality transfer in helix‐sense‐selective polymerization. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3674–3687     

Synthesis of poly(2‐vinyl pyridine)‐b‐poly(n‐hexyl isocyanate) amphiphilic coil‐rod block copolymer by anionic polymerization

A well‐defined amphiphilic coil‐rod block copolymer, poly(2‐vinyl pyridine)‐b‐poly(n‐hexyl isocyanate) (P2VP‐b‐PHIC), was synthesized with quantitative yields by anionic polymerization. A low reactive one‐directional initiator, potassium diphenyl methane (DPM‐K), was very effective in polymerizing 2‐vinyl pyridine (2VP) without side reactions, leading to perfect control over molecular weight and molecular weight distribution over a broad range of initiator and monomer concentration. Copolymerization of 2VP with n‐hexyl isocyanate (HIC) was carried out in the presence of sodium tetraphenyl borate (NaBPh₄) to prevent backbiting reactions during isocyanate polymerization. Terminating the living end with a suitable end‐capping agent resulted in a P2VP‐b‐PHIC coil‐rod block copolymer with controlled molecular weight and narrow molecular weight distribution. Cast film from a chloroform solution of P2VP‐b‐PHIC displayed microphase separation, characteristic of coil‐rod block copolymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 607–615, 2005     

Vinyltitanium as an initiator for the polymerization of acetylene

The preparation of lustrous conducting polyacetylene films by the polymerization of acetylene with vinyltitanium species as initiators was studied. Organotitanium species were generated by the alkylation of titanium vinylcarbene complexes with tert‐butyl chloride. Solid‐state ¹³C NMR and IR analyses of the obtained polyacetylene indicated that polyacetylene with a trans configuration was produced. The use of titanocene(II) species Cp₂Ti[P(OEt)₃]₂ and titanium vinylcarbene complexes for the preparation of polyacetylene films was also studied. The morphology of the films and the mechanisms of polymerization are discussed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2663–2669, 2002