Inhomogeneity control in polymer gels

Inhomogeneities, that is, nonrelaxing frozen concentration fluctuations, are inevitably present in polymer gels because they are introduced during the crosslinking of the constituent polymer chains in a solvent. Therefore, inhomogeneities increase as the number of crosslinks increases in a gel. The ionization of polymer gels is one of the methods used to suppress inhomogeneities. However, because crosslinking also means a freezing‐in of the conformation and topology of polymer chains in a solvent according to the chemistry of crosslinking, inhomogeneity control is quite sophisticated. In this article, we discuss the relationship between the inhomogeneities and the molecular/environmental parameters of polymer gels, such as the polymer concentration, the degree of crosslinking, the degree of ionization, and the interaction parameter, by considering the memory effect of gels. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 617–628, 2005     

Synthesis and optical properties of σ–π conjugated organic–inorganic hybrid gels

Organic–inorganic hybrid gels containing Si‐vinylene units have been synthesized by a hydrosilylation reaction of tri‐ or tetra‐ethynyl aryl compounds, 1,3,5‐triethynylbenzene (TEB), 3,3′,5,5′‐tetraethynylbiphenyl (TEBP), or tetrakis(4‐ethynylphenyl)methane (TEPM), and bisdimethylsilyl compounds, 1,1,3,3‐tetramethyldisiloxane (TMDS) or 1,4‐bisdimetylsilylbenzene (BDMSB), in toluene. Network structure of the resulting gels was quantitatively characterized by a scanning microscopic light scattering. The reactions yielded the gels having homogeneous network structure of 1.5–2.9 nm mesh size under the monomer concentrations that were relatively higher than the critical gelation concentration. The gels obtained from TEB showed broad absorption in the range from 340 to 370 nm, and emission in the range from 440 to 490 nm. The TEB–BDMSB gels showed remarkable red shift of the emission in comparison with that of the corresponding reaction solutions derived from the network formed by σ–π conjugation. The TEPM–TMDS, BDMSB gels exited by 280 nm showed not only the emission peak at around 360 nm derived from TEPM, but the broad peak at around 420 nm, which should be derived from interaction between phenyl groups of TEPM in the gels. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1360–1368     

Preparation and properties of poly(N‐isopropylacrylamide)/poly(N‐isopropylacrylamide) interpenetrating polymer networks for drug delivery

A novel poly(N‐isopropylacrylamide) (PNIPA)/PNIPA interpenetrating polymer network (IPN) was synthesized and characterized. In comparison with conventional PNIPA hydrogels, the shrinking rate of the IPN hydrogel increased when gels, swollen at 20 °C, were immersed in 50 °C water. The phase‐transition temperature of the IPN gel remained unchangeable because of the same chemical constituent in the PNIPA gel. The reswelling kinetics were slower than those of the PNIPA hydrogel because of the higher crosslinking density of the IPN hydrogel. The IPN hydrogel had better mechanical strength because of its higher crosslinking density and polymer volume fraction. The release behavior of 5‐fluorouracil (5‐Fu) from the IPN hydrogel showed that, at a lower temperature, the release of 5‐Fu was controlled by the diffusion of water molecules in the gel network. At a higher temperature, 5‐Fu inside the gel could not diffuse into the medium after a burst release caused by the release of the drug on the surface of the gel. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1249–1254, 2004     

Preparation and characterization of novel transparent plasticized poly(butylene terephthalate)‐co‐poly(alkylene glycol terephthalate) gel

Transparent plasticized gels with good mechanical, optical, and dielectric properties have important applications in various fields. We prepared a new gel using a poly(butylene terephthalate)‐co‐poly(alkylene glycol terephthalate) (PBT‐co‐PAGT) copolymer and a plasticizer, dibutyl adipate (DBA). This method improved the polymer crystallinity, and suppressed particle formation in cast‐films when the polymer was dissolved in 1,1,1,3,3,3‐hexafluoro‐2‐propanol, followed by solvent evaporation, and enabled uniform swelling of the polymer network by the plasticizer to form a transparent and flexible gel. The dielectric constants of the developed PBT‐co‐PAGT/DBA gels are much higher than those of PBT‐co‐PAGT films at low frequency. We believe that these PBT‐co‐PAGT/DBA gels could be used as photovoltaic, dielectric, and actuator materials. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 829–832     

Impact of Polymer Network Inhomogeneities on the Volume Phase Transition of Thermoresponsive Microgels

Thermoresponsive polymer gels exhibit pronounced swelling and deswelling upon changes in temperature, rendering them attractive for various applications. This transition has been studied extensively, but only little is known about how it is affected by nano‐ and micrometer‐scale inhomogeneities in the polymer gel network. In this work, droplet microfluidics is used to fabricate microgel particles of strongly varying inner homogeneity to study their volume phase behavior. These particles exhibit very similar equilibrium swelling and deswelling independent of their inner inhomogeneity, but the kinetics of their volume phase transition is markedly different: while gels with pronounced micrometer‐scale inhomogeneity show fast and affine deswelling, homogeneous gels shrink slowly and in multiple steps.     

Hyperbranched polymers with maleic functional groups as radical crosslinkers

The crosslinking performance of the unsaturated hyperbranched polyester poly(allyloxy maleic acid‐co‐maleic anhydride) (MAHP) was investigated with copolymerizations of three different monomers: styrene, vinyl acetate, and methyl methacrylate. Both styrene and vinyl acetate afforded interpenetrating‐polymer‐network copolymer gels. The gels exhibited crosslink density gradients through the polymer matrices on a macroscopic level, and density maximums were concentrated around the MAHP moieties. The heterogeneity of the gels is briefly discussed in terms of a modified two‐phase model, where one phase consists of an elastic part of low crosslinking density and the other phase consists of an inelastic dendritic part with a highly condensed bond density. Unlike the two‐phase model developed by Choquet and Rietsch, the modified two‐phase model takes into account that both phases swell in good solvents. Unlike copolymerizations employing styrene or vinyl acetate, the copolymerization of MAHP with methyl methacrylate afforded noncrosslinked starbranched copolymers that consisted of a MAHP core from which long poly(methyl methacrylate) branches were protruding. The different behaviors of the copolymerizations of the three monomers used in this study can rationally be explained by their different reactivity ratios with maleic end groups of MAHP. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 964–972, 2001     

Dynamic rheology and relaxation time spectra of oil‐based self‐degradable gels

In oil well treatments, such as matrix stimulations or water shut‐off, it is often necessary to temporary isolate or protect productive zones with chemical diverting agents. In this work, a solution of peroxide crosslinked styrene‐butadiene rubber (SBR) has been transformed to a self‐degradable gel system by adding hydroperoxide as a degradation agent to the formulation. This oil‐based self‐degradable gel has been characterized by linear oscillatory rheometry. In situ and ex situ experiments were performed to evaluate the evolution of crosslinking and degradation reactions, including the liquid‐solid transition. Relaxation time spectra were calculated from dynamic mechanical frequency sweeps. Structural changes in the polymer network were visible within the relaxation time spectra, since it qualitatively showed the contribution of local simple entanglements and chemical covalent bonds to the final rheological behavior. The influence of peroxide concentration, polymer concentration, hydroperoxide concentration, and temperature have been studied and described in terms of rheological changes. Finally, a hydrogen donor aromatic solvent was used as scavenger to retard both crosslinking and degradation reactions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 433–444     

Formation of porous polymer morphology by microsyneresis during divinylbenzene polymerization

This article describes the investigation of the importance of various reaction conditions on microsyneretic pore formation during polymerization of divinylbenzene (DVB) under so‐called “solvothermal” conditions. To induce microsyneretic pore formation, the most important parameter is an unusually high dilution of monomers with a “good” porogen solvating the polymer chains. High dilution and solvation of the growing poly(DVB) chains promote the prolongation of the polymer chains rather than their interconnection by crosslinking. Consequently, when the polymer gel density reaches the point where syneresis starts, the polymer network is geometrically too extensive to be broken up into precipitating entities and, instead, porogen droplets are formed within the continuous polymer gel. The pore geometry created by microsyneresis offers high surface area in wide mesopores and hence, high capacity for supporting functional groups or reactions with much better accessibility than narrow pores between polymer microspheres produced by macrosyneresis in conventional styrenic polymer supports. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 774–781     

Multiple dynamic regimes in colloid‐polymer dispersions: New insight using X‐ray photon correlation spectroscopy

We present an X‐ray photon correlation spectroscopy (XPCS) study of dynamic transitions in an anisotropic colloid‐polymer dispersion with multiple arrested states. The results provide insight into the mechanism for formation of repulsive glasses, attractive glasses, and networked gels of colloids with weakly adsorbing polymer chains. In the presence of adsorbing polymer chains, we observe three distinct regimes: a state with slow dynamics consisting of finite particles and clusters, for which interparticle interactions are predominantly repulsive; a second dynamic regime occurring above the saturation concentration of added polymer, in which small clusters of nanoparticles form via a short‐range depletion attraction; and a third regime above the overlap concentration in which dynamics of clusters are independent of polymer chain length. The observed complex dynamic state diagram is primarily governed by the structural reorganization of a nanoparticle cluster and polymer chains at the nanoparticle‐polymer surface and in the concentrated medium, which in turn controls the dynamics of the dispersion. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 752–760     

Environmentally Stable Polymer Gels with Super Deformability and High Recoverability Enhanced by Sub‐5 nm Particles in the Nonvolatile Solvent

It remains challenging to satisfy the combined performances for hydrogels with excellent mechanical behavior, high deformability, and super recoverability under harsh environmental conditions. In this study, we first established a strong polymer network via the crosslinking of polymer chains on the surfaces of sub‐5‐nm calcium hydroxide nanospherulites in ethylene glycol solvent. The organic gel expressed excellent mechanical properties such as a recoverable compressive engineering stress of 249 MPa and an elongation stress of 402 KPa, which was attributed to the uniform nanosized crosslinking structure as characterized by SEM. Moreover, the nonvolatile solvent remained in the gel, meaning that the sample can resist a wide temperature range of ?56 to 100 °C without losing the elastic properties. This novel organic gel could provide promising routes to develop the ideal elastic carriers for wearable devices, smart skin sensors, and damping materials. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 713–721     

Influences of nonsolvent and temperature on critical viscoelastic behaviors of ternary polyacrylonitrile solutions around the sol-gel threshold

Viscoelastic experiments were performed to study the influence of nonsolvent and temperature on critical viscoelastic behaviors of ternary polyacrylonitrile (PAN) solutions around the sol-gel threshold. The dynamic critical parameters around the sol-gel threshold were determined using dynamic rheometer. The sol-gel transition takes place at a critical gel temperature at which the scaling law of G′(ω) ∼ G″(ω) ∝ ωⁿ holds, allowing an accurate determination of the critical gel temperature by means of the frequency independence of the loss tangent. Although the gel points of PAN solutions increase with increasing H₂O content, the results show that the scaling exponent n at the gel point is found to be universal for all ternary PAN solutions, which is independent of temperature and H₂O content, indicating the similarity of the fractal structure in the critical PAN gels. The gelation of ternary PAN solutions induced by adding a nonsolvent and by decreasing the temperature is demonstrated to be a thermoreversible process, which implies that the PAN gels are physical gels. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2637–2643, 2008     

One‐pot fabrication of robust interpenetrating hydrogels via orthogonal click reactions

Interpenetrating polymer network (IPN) hydrogels have been fabricated through a facile one‐pot approach from tetra/bifunctional telechelic macromonomers with epoxy, amine, azide, and alkyne groups by orthogonal double click reactions: epoxy‐amine reaction and copper‐catalyzed azide‐alkyne cycloaddition. Both the crosslinked networks are simultaneously constructed in water from the biocompatible poly (ethylene glycol)‐based macromonomers. The crosslinking density of each network was finely tuned by the macromonomer structure, permitting control of network molecular weights between crosslinks of the final gels. Compared to corresponding single network gels, the IPN gels containing both tightly and loosely crosslinked networks exhibited superior mechanical properties with shear moduli above 15 kPa and fracture stresses over 40 MPa. The synthetic versatility of this one‐pot approach will further establish design principles for the next generation of robust hydrogel materials. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1459–1467     

Characterization of the network properties of poly(ethylene glycol)–acrylate hydrogels prepared by variations in the ethanol–water solvent composition during crosslinking copolymerization

The characteristics of poly(ethylene glycol) (PEG)–acrylate hydrogel networks were investigated as a function of the ethanol–water solvent composition during free‐radical crosslinking copolymerization. Macromonomer (88% ω‐methoxy‐PEG–acrylate and 10% ω‐phenoxy‐PEG–acrylate) and crosslinker (2% PEG–diacrylate) concentrations were kept constant. As the copolymerization progressed, the polymer solution in 100% ethanol became increasingly turbid, indicating the development of a heterogeneous network structure. In 100% water, however, the initially turbid polymer solution became increasingly transparent as the crosslinking copolymerization progressed. All the gels were optically clear upon equilibration in water. Kinetic studies, with attenuated total reflectance‐infrared, showed a long induction period, along with a lowered reaction rate, in 100% ethanol, and a decrease in conversion with an increase in ethanol content. These results agree with the UV analysis of the sol fractions, which indicated an increase in the amounts of unreacted PEG–acrylates with an increase in the ethanol content. The gels which were formed with a high ethanol concentration exhibited lower Young's modulus and higher swelling ability, suggesting that the network structure was significantly affected by the solvent composition during free‐radical crosslinking copolymerization. From the stress–strain and swelling experiments, the Flory–Huggins interaction parameter was evaluated. The creep characteristics of the hydrogels were modeled with two Kelvin elements. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2677–2684, 2002     

Synthesis and characterization of polyhedral oligomeric silsesquioxane hybrid co‐crosslinked poly(N‐isopropylacrylamide‐co‐dimethylaminoethyl methacrylate) hydrogels

Polyhedral oligomeric silsesquioxane hybrid temperature and pH double‐responsive hydrogels with organic–inorganic co‐crosslinked networks are synthesized by in situ, free‐radical polymerization of N‐isopropylacrylamide and dimethylaminoethyl methacrylate in the presence of both organic crosslinker N,N′‐methylenebis(acrylamide) (BIS) and inorganic crosslinker octavinyl polyhedral oligomeric silsesquioxane (OvPOSS) in tetrahydrofuran media. The resulting hydrogels (OR‐OvP gels) display obvious temperature and pH double responsiveness, OvPOSS particles dispersed in polymer make a dominant effect on the properties of gels. With the increase of OvPOSS, the aggregation of particles on nano‐ or microscale happens and causes a considerable change on the properties of gels, such as the lower critical solution temperature and better compression strength. Specially, the interconnected microporous structure of gels ascribed to the microphase separation results in faster deswelling rate, which makes the gel become attractive. Besides, the crosslink by BIS intensifies the heterogeneity of gels significantly, which could also be used to adjust the properties of gels. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1494–1504     

Effects of formulation variables on liquid‐crystal droplet size distributions in ultraviolet‐cured polymer‐dispersed liquid‐crystal cells

The size distributions of liquid‐crystal droplets in ultraviolet‐cured polymer‐dispersed liquid‐crystal cells have been studied with optical microscopy. It has been observed that (1) the relative masses of the liquid crystal and crosslinking agent determine the droplet size distribution for submicrometer droplet diameters and (2) only the liquid‐crystal mass fraction affects the droplet size distribution for diameters ranging from 1 to 4 μm. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1842–1848, 2005     

Fabrication,chemical modification,and topographical patterning of reactive gels assembled from azlactone‐functionalized polymers and a diamine

The work reported here demonstrates an approach to the fabrication of chemically reactive and topographically patterned hydrogels using the azlactone‐functionalized polymer poly(2‐vinyl‐4,4'‐dimethylazlactone) (PVDMA) and the hydrophilic diamine Jeffamine®. Gels were initially assembled in DMSO but can be subsequently transferred into aqueous media to form hydrogels. Spectroscopic characterization of assembled gels demonstrated that variation in the stoichiometric ratio of azlactones to amines during gel synthesis permits control over the extent of crosslinking in the gels. Residual azlactones not consumed during crosslinking can be exploited to further functionalize these gels with hydrophobic, hydrophilic, and macromolecular amines that influence the physicochemical properties of these materials in aqueous solvents. The surface and bulk of these gels can be differentially functionalized (i.e., different functional groups on the gel surface relative to the bulk) by taking advantage of different rates of diffusion of macromolecular amines versus small molecule amines into assembled gels. Finally, these azlactone‐functionalized gels can be topographically patterned with microwell arrays using a replica molding technique and chemically modified postfabrication with amine nucleophiles. This reactive approach to the fabrication of topographically patterned and chemically functionalized hydrogels offers a straightforward method for the rapid synthesis of micropatterned scaffolds of interest in a broad range of applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3185–3194     

Self‐ and cross‐associations in two‐component mixed polymer gels

The gel properties of two‐component mixed polymer gels are investigated using a cascade model, which assumes that the gel network is formed via the self‐association of one of the two components and the cross‐association of the two components. The effects of the model parameters, such as the equilibrium constants and the functionalities for cross‐associations and self‐associations, on the composition dependence of the modulus and gel point curves are examined to elucidate the contribution of self‐associations to the gel network. The results show that the characteristics of self‐associations become pronounced when the equilibrium constant or the functionality for self‐associations is comparable to that for cross‐associations. The model is applied to analyze the critical gelling concentration data for xanthan/locust bean gum mixed gels, which shows significant self‐associations at high xanthan compositions. The resulting model curves agree well with the experimental data at all temperatures. The analysis of the temperature dependence of the best‐fit equilibrium constant yields values of enthalpy change that are consistent with previous findings. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 80–91, 2008     

Synthesis and properties of multifunctional thiol crosslinked gels containing disulfide bond in the network structure

Joint crosslinked gels containing disulfide linkage have been synthesized by oxidation reaction of multi‐functional thiol monomers, trimethylolpropane tris(3‐mercaptopropionate), tris‐[3‐mercaptopropionyloxy‐ethyl]‐isocyanurate, pentaerythritol tetrakis (3‐mercaptopropionate), and dipenta‐erythritol hexakis (3‐mercaptopropionate) in dimethyl sulfoxide (DMSO). Both the oxidation reactions with DMSO at 85 °C and Albright‐Goldman oxidation in the presence of acetic anhydride at 50 °C yielded the corresponding gels. The oxidation reaction with DMSO showed higher reaction conversion than that with Albright‐Goldman oxidation. Network structure of the gels was quantitatively characterized by means of a scanning microscopic light scattering. The reactions formed homogeneous network structure with about 0.5 nm of mesh in the gels. Mechanical properties of the obtained gels were investigated by compression test. Increasing of the crosslinking density with increasing of the monomer concentration, number of thiol group of the monomer or reaction conversion, raised Young's modulus, and breaking stress of the gels. Cogelation of the tri‐, tetra‐, of hexa‐thiol monomer and dithiol monomers yielded soft and flexible gels. Reduction of the disulfide bonds in the gels by dithiothreitol turned the gel into solution. Heating of the resulting solution induced the regelation by reforming of the disulfide bonds. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3749–3756     

Electro‐conductive double‐network hydrogels

Novel electro‐conductive and mechanically‐tough double network polymer hydrogels (E‐DN gels) were synthesized by polymerization of 3, 4‐ethylenedioxythiophene in the presence of a double network hydrogel (DN gel) matrix. The E‐DN gels showed not only excellent mechanical performance, having a fracture stress of 1.4–2.1 MPa, but also electrical conductivity as high as 10^?3 S cm^?1, both under dry and water‐swollen states. The fracture stress and fracture energy of the E‐DN gel was increased by 1.7 and 3.4 times, respectively, as compared with the DN gel. From scanning electron microscope and AFM observations, it was found that electro‐conductive poly(3,4‐ethylenedioxythiophene) (PEDOT) was incorporated into DN gel matrix, apparently due to the formation of a poly‐ion complex with sulfonic acid group of the DN gel network. Thus, PEDOT incorporated into the DN gel matrix greatly improves not only electronic conductivity, but also mechanical properties, reinforcing the double network gel matrix. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Crosslinking polymerization leading to interpenetrating polymer network formation. I. Polyaddition crosslinking reactions of poly(methyl methacrylate‐co‐2‐methacryloyloxyethyl isocyanate)s with ethylene glycol resulting in polyurethane networks

At the start of our research program concerned with the elucidation of the crosslinking polymerization mechanism leading to interpenetrating polymer network (IPN) formation, in which IPNs consist of both polymethacrylates and polyurethane (PU) networks, this article deals with the polyaddition crosslinking reaction leading to PU network formation. Therefore, 2‐methacryloyloxyethyl isocyanate (MOI) was radically copolymerized with methyl methacrylate (MMA) in the presence of CBr₄ as a chain‐transfer agent. The resulting poly(MMA‐co‐MOI)s, having pendant isocyanate (NCO) groups as novel multifunctional polyisocyanates, were used for polyaddition crosslinking reactions with ethylene glycol as a typical diol. The second‐order rate constants depended on both the functionality of poly(MMA‐co‐MOI) and the NCO group concentration. The actual gel points were compared with the theoretical ones calculated according to Macosko's equation; the deviation of the actual gel point from the theoretical value became more remarkable for a greater functionality of poly(MMA‐co‐MOI) and at a lower NCO group concentration or at a lower poly(MMA‐co‐MOI) concentration. These are discussed mechanistically, with consideration given to the significance of intramolecular cyclization and intramolecular crosslinking reactions leading to the shrinkage of the molecular size of the prepolymer, along with the data of the intrinsic viscosities of resulting prepolymers and the swelling ratios of resulting gels. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 606–615, 2003