High speeds complementary integrated circuits fabricated with all‐printed polymeric semiconductors

Inkjet‐printed high speed polymeric complementary circuits are fabricated using an n‐type ([poly{[N,N′‐bis(2‐octyldodecyl)‐naphthalene‐1,4,5,8‐bis(dicarboximide)‐2,6‐diyl]‐alt‐5,5′‐(2,2′‐dithiophene)} [P(NDI2OD‐T2), Polyera ActivInk N2200] and two p‐type polymers [poly(3‐hexylthiophene) (P3HT) and a dithiophene‐based polymer (Polyera ActivInk P2100)]. The top‐gate/bottom‐contact (TG/BC) organic field‐effect transistors (OFETs) exhibit well‐balanced and very‐high hole and electron mobilities (μ_FET) of 0.2–0.5 cm²/Vs, which were enabled by optimization of the inkjet‐printed active features, small contact resistance both of electron and hole injections, and effective control over gate dielectrics and its orthogonal solvent effect (selection of poly(methyl methacrylate) and 2‐ethoxyethanol). Our first demonstrated inkjet‐printed polymeric complementary devices have been integrated to high‐performance complementary inverters (gain >30) and ring oscillators (oscillation frequency ～50 kHz). We believe that the operating frequency of printable organic circuits can be further improved more than 10 MHz by fine‐tuning of the device architecture and optimization of the p‐ and n‐channel semiconductor processing. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Enhanced mobility and environmental stability in all organic field‐effect transistors: The role of high dipole moment solvent

Low‐operating voltage, high mobility, and stable organic field‐effect transistors (OFETs) using polymeric dielectrics such as pristine poly(4‐vinyl phenol) (PVP) and poly(methyl methacrylate) (PMMA), dissolved in solvents of high dipole moment, have been achieved. High dipole moment solvents such as propylene carbonate and dimethyl sulfoxide used for dissolving the polymer dielectric enhance the charge carrier mobilities by three orders of magnitude in pentacene OFETs compared with low dipole moment solvents. Fast switching circuits with patterned gate PVP‐based pentacene OFETs demonstrated a switching frequency of 75 kHz at input voltages of |5 V|. The frequency response of the OFETs is attributed to a high degree of dipolar‐order in dielectric films obtained from high‐polarity solvents and the resulting energetically ordered landscape for transport. Remarkably, these pentacene‐based OFETs exhibited high stability under bias stress and in air with negligible shifts in the threshold voltage. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1533–1542     

Manufacture and demonstration of organic photovoltaic‐powered electrochromic displays using roll coating methods and printable electrolytes

Electrochromic devices (ECDs) were prepared on flexible substrates using spray coating and slot‐die coating methods. The electrochromic materials were the conjugated electroactive polymers, poly((2,2‐bis(2‐ethylhexyloxymethyl)‐propylene‐1,3‐dioxy)‐3,4‐thiophene‐2,5‐diyl) as a vibrantly colored active material (ECP‐Magenta) and poly(N‐octadecyl‐(propylene‐1,3‐dioxy)‐3,4‐pyrrole‐2,5‐diyl) as a minimally colored, charge balancing material (MCCP). Two electrolyte systems were compared to allow development of fully printable and laminated devices on flexible substrates. Devices of various sizes, up to 7 × 8 cm², are demonstrated with pixelated devices containing pixel sizes of 4 × 4 mm² or 13 × 13 mm². The transmission contrast exhibited by the devices, when switched between the fully bleached and fully colored state, was 58% at a visible wavelength of 550 nm, and the devices exhibited switching times of <10 s. Additionally, we demonstrate the utilization of printed organic photovoltaic devices (with or without the use of a lithium‐polymer battery) to power the devices between the colored and bleached state, illustrating a self‐powered ECD. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Effects of silica nanoparticle addition on polymer semiconductor wettability and carrier mobility in solution‐processable organic transistors on hydrophobic substrates

The effects of the addition of silica nanoparticles (SNPs) on wettability of regioregular poly(3‐hexylthiophene) (P3HT) organic semiconductor solutions on hydrophobic substrates and the carrier mobility in organic field‐effect transistors (OFETs) made of these films are investigated. The dewetting of films made from P3HT solutions on hydrophobic substrates modified with octadecyltrichlorosilane (ODTS) is markedly suppressed after the addition of SNPs with phenyl surfactants. This enables us to fabricate continuous P3HT/SNPs films with high crystallinity by the conventional spin‐coating technique, leading to higher mobility compared with P3HT FETs fabricated on non‐modified substrates. Moreover, the addition of SNPs with larger diameters compensates for the degradation of mobility associated with the increase in the concentration of SNPs. Solution‐processed P3HT/SNPs FETs on ODTS‐modified substrates exhibit a field‐effect mobility of 1.3 × 10^?2 cm² V^?1 s^?1, which is almost comparable to that of P3HT FETs without SNPs (2.1 × 10^?2 cm² V^?1 s^?1). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 509–516     

Two‐Step direct arylation for synthesis of naphthalenediimide‐based conjugated polymer

A naphthalenediimide (NDI)‐based conjugated polymer was synthesized by a two‐step direct C‐H arylation sequence. In the first step, two ethylenedioxythiophene units were coupled to NDI by direct arylation. In the second step, the direct arylation polycondensation of the monomer, formed in the first step, with 2,7‐dibromo‐9,9‐dioctylfluorene afforded the corresponding NDI‐based conjugated polymer ( PEDOTNDIF ) with molecular weight of 21,500 in 91% yield. The optical and electrochemical properties of the polymer were evaluated. The polymer showed ambipolar behavior in organic field‐effect transistors (OFETs). The electron mobility of PEDOTNDIF was estimated to be 2.3 × 10^?6 cm² V^?1 s^?1 using an OFET device with source‐drain (S‐D) Au electrodes. A modified OFET device with S‐D MgAg electrodes increased the electron mobility for PEDOTNDIF to 1.0 × 10^?5 cm² V^?1 s^?1 due to the more suitable work function of these electrodes, which reduced the injection barrier to the semiconducting polymer. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1401–1407     

Synthesis of biodegradable conjugated polymers with controlled backbone flexibility

A series of flexible, highly bright fluorescent poly(p‐phenyleneethynylene)s (PPEs) was prepared by employing a disulfide containing nonconjugated monomer at various ratios under Sonogashira reaction conditions. PPEs with flexible linkers exhibited fluorescence properties comparable to those of a fully conjugated PPE when less than 50% of flexible monomers were incorporated into the backbone. To evaluate the self‐assembly properties of PPEs, a series of conjugated polymer nanoparticles (CPNs) was fabricated by treating PPEs with organic acids followed by dialysis. CPNs containing linkers exhibited different complexation behavior with polysaccharides, warranting further investigation into how flexibility and biodegradability of CPNs influence their cellular interaction and entry. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1403–1412     

Rational design of diarylethylene-based polymeric semiconductors for high-performance organic field-effect transistors

Constructing planar, rigid, and high electronically delocalized π-conjugated molecular system is the most basic requirements of obtaining high-performance polymeric semiconductors for organic field-effect transistors (OFETs). In this regard, diarylethylene (DAE)-based polymers show great potential because many substantive progresses related to polymer field-effect transistors had been achieved from the kind of polymer materials in recent years. In the brief review, series of DAE-based polymer are highlighted, based on which several design strategies have been summarized by the way of comparative research method. These strategies have important guiding significance not only for further developing new DAE-based and other polymeric semiconductors for OFETs but also for developing specific polymeric semiconductors for other organic electronics, such as organic photovoltaics and organic light-emitting diodes. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 585–603     

Synthesis and characterization of benzimidazolium‐functionalized polysulfones as anion‐exchange membranes

Anion‐exchange membranes containing pendant benzimidazolium groups were synthesized from polysulfone by chrolomethylation followed by nucleophilic substitution reaction with 1‐methylbenzimidazole. The structures of the polymers were characterized by ¹H‐NMR and FTIR analysis. The resulting membranes showed high thermal stability below 200 °C. The values of water uptake and swelling degree increased with the ion‐exchange capacity of the polymeric membrane. The ionic conductivity was measured by means of impedance spectroscopy in aqueous solution of potassium hydroxide (10^?4?10^?1 M). The results show not only a clear correlation between the membrane's electrochemical behavior with the electrolyte solution embedded in the membrane, but also with the degree of the polysulfone's chloromethylation.Thus, the ionic conductivity increased more than two orders of magnitude when the degree of chloromethylation increased from 40 to 140%. Benzimidazolium‐functionalized polysulfones exhibited better thermal, mechanical, and electrochemical properties than the widely used polymeric membranes containing quaternary ammonium groups. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2363–2373     

Facile deposition of high quality ferroelectric poly(vinylidene fluoride) thin films by thermally modulated spin coating

Direct deposition of high quality ferroelectric PVDF thin films using a modulated temperature spin coating method is demonstrated. The method is qualitatively guided from Flory‐Huggins theory of polymeric solutions and is general in applicability. Ferroelectric PVDF films with similar high structural and dielectric quality are deposited in environments ranging from 20 to 80% relative humidity on polar and non‐polar surfaces. The films do not show the presence of the non‐ferroelectric α‐phase. Resultant films have rms roughness values lower than 16 nm and remnant polarizations up to 6.5 µC cm^?2. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55 , 221–227     

Low thresholds for a nonconventional polymer blend—Amplified spontaneous emission and lasing in F81−x:SYx system

A mixture of two polymer materials, poly (9,9‐dioctylfluorene) (F8), and one of the poly(para‐phenylenevinylene) derivatives, superyellow (SY) have been used to make F8_1?x:SY_x polymer blend system. Under a 3–5 ns pulsed‐laser excitation, this system showed excellent optical properties with low threshold values of ≈14 µJ/cm² and ≈8 µJ/cm² for amplified spontaneous emission and optically pumped lasing, respectively. The proposed system was also electroluminescent and an interesting candidate for future research on polymer injection lasers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 15–21     

Synthesis,characterization, and solar cell and transistor applications of phenanthro[1,2‐b:8,7‐b′]dithiophene–Diketopyrrolopyrrole semiconducting polymers

Synthesis, characterization, and polymer solar cell and transistor application of a series of phenanthro[1,2‐b:8,7‐b′]dithiophene‐based donor–acceptor (D–A)‐type semiconducting polymers combined with a diketopyrrolopyrrole unit are reported. The present polymers showed some unique features such as strong aggregation behavior, high thermal stability, and short π–π stacking distance (3.5–3.6 Å), which are suitable for high performance organic materials. In addition, they have a significantly extended absorption up to 1000 nm with a band gap of ca. 1.2 eV. However, such strong intermolecular interaction reduced their solubility and molecular weights, which resulted in low crystalline nature and moderate field‐effect mobility of 0.01 cm² V^?1 s^?1. Furthermore, such strong aggregation behavior led to the large‐scale phase separation in the blend films, which may prevent the effective photocurrent generation, limiting J_sc and power conversion efficiency of 2.0%. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 709–718     

Base‐amplifying silicone resins with photobase‐generating side chains and their application to negative‐working photoresists

To accomplish high photosensitivity of resist systems including photobase generators, we have proposed the concept of base‐proliferation reactions that generate base molecules in a nonlinear manner by the action of a catalytic amount of base; however, excessive diffusion of generated base molecules is still a problem. We have designed novel functional silicone resins bearing both base‐amplifying units and photobase‐generating units, and synthesized resins with various composition ratios. The synthesized resins are decomposed autocatalytically after UV irradiation and subsequent heating at 100 °C, which indicates progression of base‐proliferation reactions. High photosensitivity (8.1 mJ cm^?2) was recorded, and it was found that the photosensitivity is about 490 times enhanced by replacing a base‐catalytic reaction system with the base‐proliferation reaction system. Furthermore, a 4 × 10 µm line‐and‐space pattern has been successfully fabricated using the silicone resin. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1205–1212     

On‐Site Determination of Carbendazim,Cathecol and Hydroquinone in Tap Water Using a Homemade Batch Injection Analysis Cell for Screen Printed Electrodes

In this work, we present a simple homemade batch‐injection analysis cell for screen‐printed electrodes (BIA‐SPE). The potential of the proposed system for on‐site analysis was demonstrated by the determination of carbendazim, catechol, and hydroquinone in tap water. The system provided reduced injection volume (30 µL), high analytical frequency (≈200 h^?1) and low detection limits (nanomolar level). Moreover, the BIA‐SPE cell presented better stability (RSD≈0.4 %) than a conventional flow injection cell for SPE (RSD≈5.0 %) in organic media. The proposed homemade BIA‐SPE cell is very simple, inexpensive and can be easily constructed in any laboratory.     

Reversible addition‐fragmentation chain transfer polymerization of vinyl acetate under high pressure

In this work, high molecular weight polyvinyl acetate (PVAc) (M_n,GPC = 123,000 g/mol, M_w/M_n = 1.28) was synthesized by reversible addition‐fragmentation chain transfer polymerization (RAFT) under high pressure (5 kbar), using benzoyl peroxide and N,N‐dimethylaniline as initiator mediated by (S)‐2‐(ethyl propionate)‐(O‐ethyl xanthate) (X1) at 35 °C. Polymerization kinetic study with RAFT agent showed pseudo‐first order kinetics. Additionally, the polymerization rate of VAc under high pressure increased greatly than that under atmospheric pressure. The “living” feature of the resultant PVAc was confirmed by ¹H NMR spectroscopy and chain extension experiments. Well‐defined PVAc with high molecular weight and narrow molecular weight distribution can be obtained relatively fast by using RAFT polymerization at 5 kbar. © 2015 Wiley Periodicals, Inc. J. Polym. Sci. Part A: Polym. Chem. 2015 , 53, 1430–1436     

Random styrenic copolymers with pendant pyrene moieties: Synthesis and applications in organic field‐effect transistor memory

Three random copolymers comprised pendant styrene and 4‐(1‐pyrenyl)‐styrene (PyS) moieties in different molar ratios (21.4:1 ( P1 ), 3.9:1 ( P2 ), and 1.4:1 ( P3 )) were synthesized and employed as charge storage polymeric electret for nonvolatile organic field‐effect transistor (OFET) memory application. The impact of varying the molar ratio in side‐chain electron‐donating pyrene moieties on the thermal, optical, photophysical, electrochemical, and electrical properties of the resulting pendant copolymers was evaluated to establish structure–property relationship. The OFET memory with P3 electret layer exhibits a largest memory window of 41.8 V, long retention time of 10⁴ s with memory ratio of 10⁵, and stable reversibility of at least 100 cycles due to enhanced field‐induced holes trapping ability from higher PyS composition ratio. Therefore, polymer electret with pendant functional moieties shows potential for use as trapping layer in OFET memory devices. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 910–917     

Screen‐Printed Disposable Sensors Modified with Bismuth Precursors for Rapid Voltammetric Determination of 3 Ecotoxic Nitrophenols

This work reports the application of screen‐printed electrodes bulk‐modified with bismuth precursors to the voltammetric determination of 2‐nitrophenol (2‐NP), 4‐nitrophenol (4‐NP) and 2,4‐dinitrophenol (2,4‐DNP) in water samples. A bismuth film was formed at the electrode surface via in situ reduction of the precursor compound contained in the electrode matrix by cathodic polarization at ?1.20 V. The formation of bismuth layer at the precursor‐modified electrodes was assessed by cyclic voltammetric (CV) at different pH values and by optical techniques. The target nitrophenols were voltammetrically determined by recording their reduction peaks in the differential pulse (DP) mode. The composition and content of the precursor compounds in the printed ink and the effect of the pH of the supporting electrolyte on the DP reduction currents of the 3 target nitrophenols were studied. The limits of quantification (LOQs) in three water matrices (distilled water, tap water and surface water) were in the range 1.1–2.2 µmol L^?1_. Using a simple solid‐phase extraction (SPE) procedure with Lichrolut EN cartridges and elution with methanol, a preconcentration factor of 100 was achieved; the LOQs were 0.021, 0.027 and 0.025 µmol L^?1 for 2‐NP, 4‐NP and 2,4‐DNP, respectively. The recoveries of samples spiked with the 3 target nitrophenols at two concentration levels (0.04 and 0.1 µmol L^?1) were always >87 %.     

Epoxy resin curing reaction studied by proton multiple‐quantum NMR

This study demonstrates that the curing reaction of thermosetting polymers, in particular, epoxy resins cured with aliphatic amines, can be characterized by different multiple‐quantum (MQ) NMR experiments performed in low‐field spectrometers. Measurements of the curing reaction at 40 °C, 70 °C, and 100 °C are carried out to obtain the kinetic parameters like induction time, vitrification time, polymerization rate, and activation energy being consistent with data obtained by other traditional and complementary techniques. Besides, it is demonstrated that ¹H MQ‐NMR spectroscopy is a successful approach to overcome the experimental challenge arising from the characterization of high dipolar‐coupled polymers to study the network structure and segmental dynamics of thermosetting polymer networks. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1324–1332     

Synthesis and copolymerization of oligo(lactic acid) derived norbornene macromonomers with amino acid derived norbornene monomer: Formation of the 3D macroporous scaffold

Norbornene macromonomers 2 and 3 bearing 10‐ and 20‐mers of lactide were synthesized by ring‐opening polymerization of lactide using 5‐norbornene‐2, 3‐exo‐exo‐dimethanol as an initiator and DBU as a catalyst. Macromonomers 2 and 3 were copolymerized with amino acid derived norbornene monomer 1 , using the Grubbs 2nd generation ruthenium catalyst. The random and block copolymers with M_n's ranging from 28,000 to 180,000 were obtained almost quantitatively where the M_n's of the block copolymers were higher than those of the random ones. Three‐dimensional macroporous structure polymers with average pore size of 10 µm could be found in poly( 1 ) and the block co‐polymer of 1 and 2 or 1 and 3 at the high ratio of 1 . Meanwhile, poly( 2 ) and poly( 3 ) along with block and random copolymers with low ratio of 1 exhibit much larger pores in the range of 50–300 µm. The porosity increased with increase in the unit ratio of 1 . The compressive strength of the porous structure of poly( 2 ) and poly( 3 ) was improved by the copolymerization with 1 . © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1660–1670     

Influence of molecular weight on the short‐channel effect in polymer‐based field‐effect transistors

In this study, we demonstrate how the intrinsic properties of a polymer can influence the electrical characteristics of organic field‐effect transistors (OFETs). OFETs fabricated with three batches of poly[2‐methoxy,5‐(3′,7′‐dimethyl‐octyloxy)]‐p‐phenylene vinylene (MDMO‐PPV) were investigated. The properties of the polymers were initially investigated using Fourier transform infrared spectroscopy (FTIR), impedance spectroscopy (IS), gel permeation chromotography (GPC), and cyclic voltammetry (CV), respectively. The structure and purity of the polymer batches were found to be very comparable, but the molecular weight (M_n and M_w) and polydispersity (PDI = M_w/M_n), varied between the samples and the HOMO and LUMO levels of the polymers were found to depend on the molecular weight properties. OFETs were then fabricated with the polymers and electrically characterized. It was observed that the channel current and the field‐effect mobility increase with increasing polymer molecular weight. The output characteristics of the transistors, on the other hand, were found to depend on the PDI of the polymer. Saturation of the channel current occurs at higher source–drain voltages and short‐channel behavior was observed to start at longer channel lengths for polymers with a higher PDI. This behavior is observed to be thickness dependent, and the short‐channel behavior was more pronounced for thicker MDMO‐PPV films. These results are explained in terms of influences of chain packing and ordering and high bulk currents on the FET output and transistor parameters. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 50: 117–124, 2012     

Low‐CTE photosensitive polyimide based on semialicyclic poly(amic acid) and photobase generator

A negative‐type photosensitive polyimide (PSPI) based on semialicyclic poly(amic acid) (PAA), poly(trans‐1,4‐cyclohexylenediphenylene amic acid), and {[(4,5‐dimethoxy‐2‐nitrobenzyl)oxy]carbonyl} 2,6‐dimethylpiperidine (DNCDP) as a photobase generator has been developed as a next‐generation buffer coat material. The semialicyclic PAA was synthesized from 3,3′,4,4′‐biphenyltetracarboxylic dianhydride and trans‐1,4‐cyclohexyldiamine in the presence of acetic acid, and the PAA polymerization solution was directly used for PSPI formulation. This PSPI, consisting of PAA (80 wt %) and DNCDP (20 wt %), showed high sensitivity of 70 mJ/cm² and high contrast of 10.3, when it was exposed to a 365‐nm line (i‐line), postexposure baked at 190 °C for 5 min, and developed with 2.38 wt % tetramethylammonium hydroxide aqueous solution containing 20 wt % isopropanol at 25 °C. A clear negative image of 6‐μm line and space pattern was printed on a film, which was exposed to 500 mJ/cm² of i‐line by a contact printing mode and fully converted to poly(trans‐1,4‐cyclohexylenebiphenylene imide) pattern upon heating at 250 °C for 1 h. The PSPI film had a low coefficient of thermal expansion of 16 ppm/K compared to typical PIs, such as prepared from 3,3′,4,4′‐biphenyltetracarboxylic dianhydride and 4,4′‐oxydianiline. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1317–1323, 2010