Electrosynthesis and electrochromic properties of free‐standing copolymer based on oligo(oxyethylene) cross‐linked 2,2’‐bithiophene and 3,4‐ethylenedioxythiophene

Oligo(oxyethylene) chains cross‐linked 2,2’‐bithiophene (BT‐E5‐BT) has been synthesized successfully. A free‐standing copolymer film based on BT‐E5‐BT and 3,4‐ethylenedioxythiophene (P(BT‐E5‐BT‐co‐EDOT)) has been synthesized by electrochemical polymerization. The electrical conductivity of P(BT‐E5‐BT‐co‐EDOT) copolymer (16 S m^?1) has improved by four orders of magnitude compared to the homopolymer of BT‐E5‐BT (P(BT‐E5‐BT), 5 × 10^?3 S m^?1) at room temperature. Both homopolymer and copolymer films exhibit well‐defined redox and satisfied coloration efficiency. Spectroelectrochemistry studies indicate that the P(BT‐E5‐BT‐co‐EDOT) has a lower band gap in the range of 1.83–1.90 eV and shows more plentiful electrochromic colours (green, blue, purple and salmon pink) compared with the homopolymer P(BT‐E5‐BT). The Copolymer P(BT‐E5‐BT‐co‐EDOT) shows the moderate optical contrast (26% of 480 nm) and coloration efficiency (205.41 cm^?1 C^?2). The copolymer method provides a novel way to fabricate a free‐standing organic electrochromic device. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1583–1592     

Investigation of the doping efficiency of poly(styrene sulfonic acid) in poly(3,4‐ethylenedioxythiophene)/poly(styrene sulfonic acid) dispersions by capillary electrophoresis

CE can efficiently separate poly(3,4‐ethylenedioxythiophene)/poly(styrene sulfonic acid) (PEDOT/PSS) complexes and free PSS in dispersions and can be used to estimate the degree of PSS doping. We investigated the doping efficiency of PSS on PEDOT in dispersions using CE and its effect on the conductivity of the resulting PEDOT/PSS films. Results of this study indicate that dispersions containing 1:2.5–3 EDOT:PSS feed ratio (by weight) exhibiting 72–73% PSS doping generate highly processable and highly conductive films. Conductivity can be optimized by limiting the time of reaction to 12 h. At this point of the reaction, the PEDOT/PSS segments, appearing as broad band in the electropherogram, could still exist in an extended coil conformation favoring charge transport resulting in high conductivity. Above a threshold PEDOT length formed at reaction times longer than 12 h, the PEDOT/PSS complex, appearing as spikes in the electropherogram, most likely have undergone a conformational change to coiled core‐shell structure restricting charge transport resulting in low conductivity. The optimal conductivity (5.2 S/cm) of films from dispersions synthesized for 12 h is significantly higher than those from its commercial equivalent Clevios P and other reported values obtained under similar conditions without the addition of codopants.     

Electrochromic enhancement of poly(3,4‐ethylenedioxythiophene) films functionalized with hydroxymethyl and ethylene oxide

2‐((2,3‐Dihydrothieno[3,4‐b]dioxin‐2‐yl)methoxy)methyl oxirane (EDOT‐MO) was successfully synthesized by the reaction of epichlorohydrin with hydroxymethylated‐3,4‐ethylenedioxylthiophene (EDOT‐MeOH), which was synthesized via a simple four‐step sequence. Poly(hydroxymethylated‐3,4‐ethylenedioxylthiophene) (PEDOT‐MeOH) and poly(2‐((2,3‐dihydrothieno[3,4‐b]dioxin‐2‐yl)methoxy)methyl oxirane) (PEDOT‐MO) were electrosynthesized through electropolymerization of EDOT‐MeOH and EDOT‐MO, respectively. Structural, electrochemical, optical, and thermal properties of as‐formed polymers were investigated by FTIR, cyclic voltammetry, UV–vis, and thermogravimetry. Spectroelectrochemistry studies demonstrated that PEDOT‐MeOH and PEDOT‐MO could be reversibly oxidized and reduced accompany with obvious color changes. Further kinetic studies demonstrated that the introduction of hydroxymethyl or ethylene oxide group significantly improved electrochromic properties of 3,4‐ethylenedioxythiophene (PEDOT) and resulted in high contrast ratios (57.3% at 585 nm) and coloration efficiencies (338.5 cm² C^?1), low switching voltages, and fast response time. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1989–1999     

Systematic study on chemical oxidative and solid‐state polymerization of poly(3,4‐ethylenedithiathiophene)

Systematic research on the synthesis, chemical oxidative polymerization of 3,4‐ethylenedithiathiophene (EDTT) in the presence of surfactants or not, and solid‐state polymerization of 2,5‐dibromo‐3,4‐ethylenedithiathiophene (DBEDTT) and 2,5‐diiodo‐3,4‐ethylenedithiathiophene (DIEDTT) under solventless and oxidant‐free conditions has been investigated. Effects of oxidants (Fe³⁺ salts, persulfate salts, peroxides, and Ce⁴⁺ salts), solvents (H₂O, CH₃CN/H₂O, and CH₃CN), surfactants, and so forth on polymerization reactions and properties of poly(3,4‐ethylenedithiathiophene) (PEDTT) were discussed. Characterizations indicated that FeCl₃ was more suitable oxidant for oxidative polymerization of EDTT, while CH₃CN was a better solvent to form PEDTT powders with higher yields and electrical conductivities. Dispersing these powders in aqueous polystyrene sulfonic acid (PSSH) solution showed better stability and film‐forming property than sodium dodecylsulfate and sodium dodecyl benzene sulfonate. Oxidative polymerization of EDTT in aqueous PSSH solutions formed the solution processable PEDTT dispersions with good storing stability and film‐forming performance. Solvent treatment showed indistinctive effect on electrical conductivity of free‐standing PEDTT films. As‐formed PEDTT synthesized from solid‐state polymerization showed similar electrical conductivity, poorer stability, but better thermoelectric property than oxidative polymerization. Contrastingly, PEDTT synthesized from DIEDTT showed higher electrical conductivity (0.18 S cm^?1) than DBEDTT which showed better thermoelectric property with higher power factor value (6.7 × 10^?9 W m^?1 K^?2). © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Thieno[3,2‐b]Thiophene End‐Capped all‐Sulfur Analog of 3,4‐Ethylenedioxythiophene and its Eletrosynthesized Polymer: Is Distorted Conformation Not Suitable for Electrochromism?

By employing planar thieno[3,2‐b]thiophene (TT) as end‐capped units and famous 3,4‐ethylenedioxythiophene (EDOT) or its all‐sulfur analog 3,4‐ethylenedithiathiophene (EDTT) as cores, two conjugated oligomer, TT‐EDOT‐TT and TT‐EDTT‐TT, have been synthesized and electropolymerized into electrochromic polymer films, P(TT‐EDOT‐TT) and P(TT‐EDTT‐TT), respectively. Due to strongly noncovalent inter/intramolecular interactions from S? S attraction of TT‐EDTT‐TT, it has twisted molecular configuration in contrast to planar TT‐EDOT‐TT. Spectroscopic, electrochemical, morphological as well as theoretical calculation studies of these oligomers or polymers were carried out to reveal the significant influence of such molecular geometry on their physicochemical and optoelectronic properties. According to electrochromic kinetics, P(TT‐EDTT‐TT) presented preferable electrochromic behavior such as the higher optical contrast (70.8%), favorable coloration efficiency (331.3 cm² C^?1) and fast response time (0.72 s). This research will help us deeply understand the effect of spatial organization of precursor molecules on the properties of electrochromic polymers and provides a promising strategy to develop high‐performance electrochromic materials. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1041–1048     

Improved EL efficiency of fluorene‐thieno[3,2‐b]thiophene‐based conjugated copolymers with hole‐transporting or electron‐transporting units in the main chain

New electroluminescent polymers (poly(9,9′‐dioctylfluorene‐co‐thieno[3,2‐b]thiophene‐co‐benzo[2,3,5]thiadiazole) ( P1) and poly(9,9′‐dioctylfluorene‐co‐thieno[3,2‐b]thiophene‐co‐benzo[2,3,5]thiadiazole‐co‐[4‐(2‐ethylhexyloxyl)phenyl]diphenylamine ( P2) ) possess hole‐transporting or electron‐transporting units or both in the main chains. Electron‐deficient benzothiadiazole and electron‐rich triphenylamine moieties were incorporated into the polymer backbone to improve the electron‐transporting and hole‐transporting characteristics, respectively. P1 and P2 show greater solubility than poly(9,9′‐dioctylfluorene‐co‐thieno[3,2‐b]thiophene ( PFTT ), without sacrificing their good thermal stability. Moreover, owing to the incorporation of the electron‐deficient benzothiadiazole unit, P1 and P2 exhibit remarkably lower LUMO levels than PFTT , and thus, it should facilitate the electron injection into the polymer layer from the cathode electrode. Consequently, because of the balance of charge mobility, LED devices based on P1 and P2 exhibit greater brightness and efficiency (up to 3000 cd/m² and 1.35 cd/A) than devices that use the pristine PFTT . © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 243–253, 2006     

Secondary doping in poly(3,4‐ethylenedioxythiophene):Poly(4‐styrenesulfonate) thin films

The electrical and structural properties of poly(3,4‐ethylenedioxythiophene):poly(4‐styrenesulfonate) (PEDOT:PSS) thin films deposited from aqueous dispersion using different concentrations of selected secondary dopants are studied in detail. An improvement of the electrical conductivity by three orders of magnitude is achieved for dimethyl sulfoxide, sorbitol, ethylene glycol, and N,N‐dimethylformamide, and the secondary dopant concentration dependence of the conductivity exhibits almost identical behavior for all investigated secondary dopants. Detailed analysis of the surface morphology and Raman spectra reveals no presence of the secondary dopant in fabricated films, and thus the dopants are truly causing the secondary doping effect. Although the ratio of benzenoid and quinoid vibrations in Raman spectra is unaffected by doping, the phase transition in PEDOT:PSS films owing to doping is confirmed. Further analysis of temperature‐dependent conductivity reveals 1D variable range hopping (VRH) charge transport for undoped PEDOT:PSS, whereas highly conductive doped PEDOT:PSS films exhibit 3D VRH charge transport. We demonstrate that the charge ‐ hopping dimensionality change should be a fundamental reason for the conductivity enhancement. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1139–1146     

A platform to synthesize a soluble poly(3,4‐ethylenedioxythiophene) analogue

Alkyl‐substituted polyhedral oligomeric silsesquioxane (POSS) cage is combined with 3,4‐ethylenedioxythiophene under the same roof. The corresponding monomer called EDOT‐POSS is used to get soluble poly(3,4‐ethylenedioxythiophene) (PEDOT‐POSS) analogue. Both chemically and electrochemically obtained polymers are soluble in common organic solvents like dichloromethane, chloroform, tetrahydrofuran, and so forth. The PEDOT‐POSS has somewhat higher band gap (1.71 eV at 618 nm) than its parent PEDOT (1.60 eV at 627 nm) and as expected the PEDOT‐POSS exhibits higher optical contrast (74% at 618 nm) and coloration efficiency (582 cm²/C for 100% switching), lower switching time (0.9 s), higher electrochemical stability (93% of its electroactivity retains after 5000 cycles under ambient conditions) when compared to the PEDOT. A number of advantages of the PEDOT‐POSS over the PEDOT can make it a promising material in the areas of electro‐optical applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3935–3941     

Alternating narrow band gap copolymers derived from indeno[1,2‐b]fluorene and thiophene‐cored‐thieno[3,4‐b]pyrazine derivatives—Synthesis,characterization and comparative studies of photochemical stability

Alternating narrow band gap (NBG) conjugated polymers derived from 6,6′,12,12′‐tetraoctylindeno[1,2‐b]fluorene (IF) and 2,3‐dimethyl‐5,7‐dithien‐2‐yl‐thieno[3,4‐b]pyrazine (DTTP), 2,3‐diphenyl‐5,7‐dithien‐2‐yl‐thieno[3,4‐b]pyrazine (DPTP) or 2,3‐dioctyl‐5,7‐dithien‐2‐yl‐thieno[3,4‐b]pyrazine (DOTP), named as PIF‐DTTP, PIF‐DPTP, and PIF‐DOTP, respectively, were synthesized by Suzuki coupling reaction and characterized. The photochemical stabilities of the copolymers and copolymer derived from IF and 5,7‐dithien‐2‐yl‐thieno[3,4‐b]pyrazine (DTP) were investigated by the UV absorptions, PL spectra, FT‐IR spectra, and photovoltaic properties of the copolymers as a function of UV irradiation time. The studies revealed that the degradation of thieno[3,4‐b]pyrazine (TP) ring under UV irradiation can be retarded or eliminated by introducing phenyl group into the 2,3‐positions of TP ring, and indicated that 2,3‐diphenylthieno[3,4‐b]pyrazine could be used as durable electron deficient moiety to achieve donor–acceptor NBG‐conjugated polymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Potentiometric Ag+ Sensors Based on Conducting Polymers: A Comparison between Poly(3,4‐ethylenedioxythiophene) and Polypyrrole Doped with Sulfonated Calixarenes

Potentiometric Ag⁺ sensors were prepared by galvanostatic electropolymerization of 3,4‐ethylenedioxythiophene (EDOT) and pyrrole (Py) on glassy carbon electrodes by using sulfonated calixarenes as doping ions. Poly(3,4‐ethylenedioxythiophene) (PEDOT) and polypyrrole (PPy) doped with p‐sulfonic calix[4]arene (C4S), p‐sulfonic calix[6]arene (C6S) and p‐sulfonic calix[8]arene (C8S) were compared. PEDOT and PPy doped with poly(styrene sulfonate) (PSS) were also included for comparison. The analytical performance of the conducting polymer‐based Ag⁺ sensors was studied by potentiometric measurements. All conducting polymer and dopant combinations showed sensitivity and selectivity to Ag⁺ compared to several alkali, alkaline‐earth, and transition‐metal cations. The type of the conducting polymer used for the fabrication of the electrodes was found to have a more significant effect on the selectivity of the electrodes to Ag⁺ than the ring size of the sulfonated calixarenes used as dopants. Selected conducting polymer‐based sensors were studied by cyclic voltammetry (CV) and energy dispersive analysis of X‐rays (EDAX) measurements. Results from the EDAX measurements show that both PEDOT‐ and PPy‐based membranes accumulate silver.     

Reactions of hydrazonoyl halides 43 : Synthesis of some new 2,3‐dihydro‐1,3,4‐thiadiazoles,pyrazoles, pyrazolo[3,4‐d]‐pyridazines,thieno[2,3‐b]pyridines,pyrimidino[4′,5′:4,5]thieno[2,3‐b]‐pyridines and pyrrolo[3,4‐d]pyrazoles

2,3‐Dihydro‐1,3,4‐thiadiazoles, pyrazoles, pyrazolo[3,4‐d]pyridazines, thieno[2,3‐b]pyridines, pyrim‐idino[4′,5′:4,5]thieno[2,3‐b]pyridines and pyrrolo[3,4‐d]pyrazoles were obtained in a good yields by treatment of hydrazonoyl halides with each of alkyl carbodithioates, 3‐(dimethylamino)‐1‐naphtho[1,2‐d]furan‐2‐ylprop‐2‐en‐1‐one and N‐arylmalemides.     

Poly (3,4‐ethylenedioxythiophene) γ‐Fe2O3 polymer composite–super paramagnetic behavior and variable range hopping 1D conduction mechanism–synthesis and characterization

The present paper reports the preparation of poly (3,4‐ethylenedioxythiophene) (PEDOT) ferrimagnetic conducting polymer composite by incorporation of ferrite particles in the polymer matrix by emulsion polymerization. Synthesis of PEDOT–γ‐Fe₂O₃ composite was carried out by chemical oxidative polymerization of EDOT with ferrite particles in the presence of dodecylbenzenesulfonic acid (DBSA) that works as dopant as well as surfactant in aqueous medium. The resulting conducting composite possesses saturation magnetization (Ms) value of 20.56 emu/g with a conductivity of 0.4 Scm^?1, which was determined by VSM and four probe technique, respectively. B‐H curve reveals that ferrimagnetic particles of γ‐Fe₂O₃ show super‐paramagnetic behavior at room temperature which was also observed in PEDOT–γ‐Fe₂O₃ composite. The resulting conducting ferrimagnetic composite shows microwave absorption loss of 18.7–22.8 dB in the frequency range of 12.4–18 GHz. Thermogravimetric analysis of the composite revealed that the composite is thermally stable up to 230°C. The characterization of the PEDOT–γ‐Fe₂O₃ composite was carried out using XRD and FTIR spectroscopy. Copyright © 2007 John Wiley & Sons, Ltd.     

Enhancing electrochromic properties of conducting polymers via copolymerization: Copolymer of 1‐(4‐fluorophenyl)‐2,5‐di(thiophen‐2‐yl)‐1H‐pyrrole with 3,4‐ethylene dioxythiophene

A copolymer of 1‐(4‐fluorophenyl)‐2,5‐di(thiophen‐2‐yl)‐1H‐pyrrole (FPTP) with 3,4‐ethylene dioxythiophene (EDOT) was electrochemically synthesized and characterized. While poly(FPTP) (P(FPTP)) has only two colors in its oxidized and neutral states (blue and yellow), its copolymer with EDOT has five different colors (purple, red, light gray, green, and blue). Electrochromic devices based on P(FPTP‐co‐EDOT) and poly(3,4‐ethylenedioxythiophene) (PEDOT) were constructed and characterized. The oxidized state of the device shows blue color whereas it shows purple for the reduced state. At several potentials the device has good transparency with green and gray colors. Maximum contrast (Δ%T) and switching time of the device were measured as 23% and 1.1 s at 555 nm. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4496–4503, 2007     

Simultaneous synthesis of silver nanoparticles and poly(2,5‐dimethoxyaniline) in poly(styrene sulfonic acid)

Silver nanoparticles were formed in situ along with poly(2,5‐dimethoxyaniline) (PDMA) in an interconnected network matrix (reactor), comprising the electronic conductive polymer, PDMA, and a polyelectrolyte, poly(styrene sulfonic acid) (PSS), through the simultaneous reduction of Ag⁺ ions and polymerization of 2,5‐dimethoxyaniline. In situ ultraviolet‐visible spectroscopy showed that peaks corresponding to the plasmon resonance of silver nanoparticles at 411 nm and the polaronic transition of PDMA at 438 nm provided evidences for the simultaneous formation of silver nanoparticles and PDMA. Transmission electron microscopy and size distribution analysis revealed the presence of spherical silver nanoparticles with an average diameter of 12 nm in the composite. X‐ray photoelectron spectroscopy showed that the amine units in PDMA changed to imine units upon the formation of silver nanoparticles. A comprehensive mechanism for the formation of the PDMA‐PSS‐Ag nanocomposite is proposed. A 10‐fold increase in the conductivity was noticed for the PDMA–PSS–Ag nanocomposite (1 S/cm) in comparison with the PDMA–PSS composite (0.1 S/cm). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3843–3852, 2006     

Synthesis of some new bipyridines,thieno[2,3‐b]pyridines,and pyrazolo[3,4‐b]pyridines

Cyclocondensation of cyanoacetamide and cyanothioacetamide with sodium salt of 3‐hydroxy‐1‐(pyridin‐3‐yl)prop‐2‐en‐1‐one gave 6‐oxo‐[2,3′]bipyridine 5a and 6‐thioxo‐[2,3′]bipyridine 5b derivatives, respectively. Compound 5b upon treatment with different methylenes 8 gave thieno[2,3‐b]pyridines 10 . Treatment of 5b with iodomethane gave bipyridine derivative 7 , which cyclocondensed with hydrazines 11 to give pyrazolo[3,4‐b]pyridines 13 . J. Heterocyclic Chem., (2012).     

Synthesis and Properties of Degradable Copolymers Composed of Poly(ε‐caprolactone) and 3,4‐Dihydroxycinnamic Acid

Photoreactive and degradable hyperbranched (HB) copolymers with various 3,4‐dihydroxycinnamic acid (DHCA) compositions, poly(ε‐caprolactone)‐co‐poly(3,4‐dihydroxycinnamic acid) (PCL‐co‐PDHCA), were obtained by thermal melt‐polycondensation of PCL and DHCA. The HB structures and the branching degree (BD) of the PCL‐co‐PDHCA copolymers were confirmed by Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (¹H NMR). The melting points (T_m) of the PCL‐co‐PDHCA copolymers changed depending on the PCL and DHCA composition by differential scanning calorimetry (DSC) measurements. Wide angle X‐ray diffraction (WXRD) analysis showed semi‐crystalline of the PCL and PCL‐co‐PDHCA polymers. The PCL‐co‐PDHCA copolymers showed good photoreactivities and fluorescent properties. Crosslinking of the cinnamoyl groups in the copolymers caused by UV irradiation affected the thermal stability and wettability slightly. Moreover, the hydrolysis experiments revealed that copolymers are facile degradable.     

Growth of poly(3,4‐ethylenedioxythiophene) films prepared by base‐inhibited vapor phase polymerization

Transparent [90% transmittance at 550 nm at a sheet resistance (R_s) of 279 Ω sq^?1] poly(3,4‐ethylenedioxythiophene) (PEDOT) films with electrical conductivities up to 1354 S cm^?1 are prepared using base‐inhibited vapor phase polymerization at atmospheric pressure. The influence of reaction conditions, such as temperature and growth time, on the film formation is investigated. A simple and convenient two‐electrode method is used for the in situ measurement of resistance, enabling to investigate the growth mechanism of polymer films and the influence of different parameters (relative humidity and the amount of oxidant) on the film growth. Low humidity exerts a detrimental effect on film growth and conductivity. In situ R_s measurements suggest that a large structural change occurs upon washing the PEDOT‐oxidant film. © 2014 Wiley Periodicals, Inc. J Polym Sci Part B: Polym. Phys. 2014 , 52, 561–571     

Synthesis and microwave absorbing properties of poly(3,4‐ethylenedioxythiophene) (PEDOT) microspheres

Poly(3,4‐ethylenedioxythiophene) (PEDOT) solid and hollow microspheres were successfully synthesized by simply adjusting the concentration of 3,4‐ethylenedioxythiophene (EDOT) and the molar ratio of EDOT to ammonium persulfate (APS) (represented by (EDOT)/(APS)), respectively. Microwave absorbing properties of PEDOT microspheres with tunable reflection loss (RL) and microwave frequency band were described in detail. The relationships between the conductivity and RL of PEDOT microspheres were also discussed. Copyright © 2010 John Wiley & Sons, Ltd.     

Paper: An effective substrate for the enhancement of thermoelectric properties in PEDOT:PSS

A novel strategy via paper as an effective substrate has been introduced as a thermoelectric material in this work. Free‐standing poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS)/paper composite films are conveniently prepared by a one‐step method of directly writing PEDOT:PSS solution on paper, making the process simple, rapid, and facile. The free‐standing composite films display excellent flexibility, light weight, soaking stability in water, and great potential in large‐scale production. Improved thermoelectric properties are obtained in PEDOT:PSS/paper composite films, owing to the simultaneously enhanced Seebeck coefficient (30.6 μV K^?1) and electrical conductivity, and a low thermal conductivity (0.16 W m^?1 K^?1) compared with pristine PEDOT:PSS films. The results indicate that paper as an effective substrate is suitable for the preparation of high‐performance and flexible thermoelectric materials. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 737–742     

Why does the electrical conductivity in PEDOT:PSS decrease with PSS content? A study combining thermoelectric measurements with impedance spectroscopy

We have investigated the electrical transport properties of poly(3,4‐ethylenedioxythiophen)/poly(4‐styrene‐sulfonate) (PEDOT:PSS) with PEDOT‐to‐PSS ratios from 1:1 to 1:30. By combining impedance spectroscopy with thermoelectric measurements, we are able to independently determine the variation of electrical conductivity and charge carrier density with PSS content. We find the charge carrier density to be independent of the PSS content. Using a generalized effective media theory, we show that the electrical conductivity in PEDOT:PSS can be understood as percolation between sites of highly conducting PEDOT:PSS complexes with a conductivity of 2.3 (Ωcm)^?1 in a matrix of excess PSS with a low conductivity of 10^?3 (Ω cm)^?1. In addition to the transport properties, the thermoelectric power factors and Seebeck coefficients have been determined. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012