Friedel–crafts reactions of pendant vinyl groups in macroporous monosized poly(meta‐divinylbenzene) and poly(para‐divinylbenzene) particles

Residual vinyl groups in macroporous monosized polymer particles of poly(meta‐DVB) and poly(para‐DVB) prepared with toluene and 2‐EHA as porogens have been reacted with aluminum chloride as Friedel–Crafts catalyst with and without the presence of lauroyl chloride. In the reaction between aluminum chloride and pendant vinyl groups a post‐crosslinking by cationic polymerization takes place. A reaction occurring simultaneously is the addition of HCl to the double bonds. The progress of these reactions was studied by characterization of vinyl group conversion, pore size distribution, specific surface area, morphology, and swelling behavior. In the reaction with aluminum chloride the poly(para‐DVB) particles showed a substantially higher conversion of pendant vinyl groups than the particles made of poly(meta‐DVB) independent of porogen type. The reaction with aluminum chloride led to a reduced swelling in organic solvents and an increased rigidity of the particles prepared with toluene as porogen. This is confirmed by an increase in the total pore volume in the dry state and a change in the pore size distribution of these particles. Also in the reaction with lauroyl chloride poly(para‐DVB) particles have shown a higher conversion of pendant vinyl groups than poly(meta‐DVB) particles and the acylation was almost complete at the early stage of the reaction. The swelling in organic solvents is reduced as a result of the incorporation of acyl groups into the particles prepared with toluene as porogen. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1366–1378, 2000     

Enhanced spin capturing polymerization: Numerical investigation of mechanism

Simulation on the kinetic scheme of enhanced spin capturing polymerizations (ESCP) were performed to reveal the influence of different parameters, e.g., initiation rate, spin capturing and side reactions on the properties (the monomer conversion, degree of polymerization, polydispersity index, and the fraction of “living” chains) of polymer obtained. The kinetic scheme of ESCP was solved numerically as well as the method of statistical moments of molecular weight distribution was applied to get some numerical expressions for analysis. The simulations showed that fast initiation rate can lead to decrease of living fraction and broadening of molecular weight distribution. Whereas high rate of spin capturing makes the polymer chains shorter but increases living character. And side reactions always decrease livingness of the polymer obtained. Finally in the case of absence of side reaction we were able to formulate criteria for formation of polymer with target molecular weight and quota of living chains via ESCP process. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2546–2556     

Light‐driven atom transfer radical polymerization on supramolecular complexes of conjugated polymers and single‐walled carbon nanotubes

Previous approaches used to decorate latently reactive conjugated polymer‐coated carbon nanotube complexes have utilized “grafting‐to” strategies. Here, we coat the carbon nanotube surface with a conjugated polymer whose side chains contain the radical initiator, α‐bromoisobutyrate, which enables atom transfer radical polymerization (ATRP) from the polymer–nanotube surface. Using light to generate Cu(I) in situ, ATRP is used to grow narrow dispersity polymer chains from the polymer–nanotube surface. We confirm the successful polymerization of (meth)acrylates from the polymer–nanotube surface using a combination of gel permeation chromatography and infrared spectroscopy. Strikingly, we demonstrate that nanotube optoelectronic properties are preserved after radical‐mediated polymer grafting using Raman spectroscopy and photoluminescence mapping. Overall, this work elucidates a method to grow narrow dispersity polymer chains from the polymer–nanotube surface using light‐driven radical chemistry, with concurrent preservation of nanotube optoelectronic properties. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2015–2020     

Ion‐exchange resins. III. Functionalization–morphology correlations in the synthesis of some macroporous,strong basic anion exchangers and uranium‐sorption properties evaluation

The synthesis and characterization of a series of macroporous, strong basic anion exchangers (SBAEs), with an average pore radius higher than 50 nm, and the evaluation of their sorption properties for uranyl chlorocomplexes from HCl solutions are reported. Finely divided macroporous styrene–divinylbenzene (S–DVB) copolymers with a narrow distribution of beads sizes, diameters within the range of 90–200 μm, were prepared for this purpose with 2‐ethyl‐1‐hexanol as a porogen, at a high dilution of monomers (D ≥ 0.55 mL/mL). Chloromethyl groups were introduced with (CH₂O)_n/Me₃SiCl as a chloromethylation agent in the presence of a Lewis acid as a catalyst (TiCl₄, SnCl₄, and FeCl₃) in CHCl₃ as a reaction medium. SnCl₄ and FeCl₃ gave comparable chloromethylation degrees in the same reaction conditions. TiCl₄ was not efficient as a catalyst in the chloromethylation with this reagent. Diethyl‐2‐hydroxyethylamine was used as a tertiary amine to prepare SBAEs. Structural and morphological characteristics were determined after every functionalization step of the macroporous network. Both the chloromethylation, in the presence of FeCl₃ as a catalyst, and the amination reactions determined a significant decrease of the pore volume, in the whole range of the nominal crosslinking degree, comparative with the starting copolymer. The specific surface area and the average pore radius varied in a different way as a function of the nominal crosslinking degree. Thus, the specific surface area increased and the average pore radius decreased after chloromethylation and amination for copolymers with a DVB content lower than 10 wt %. Small decreases of the specific surface area and the average pore radius were observed after chloromethylation and amination reactions for copolymers with a DVB content higher than 10 wt %. SBAEs were also characterized by thermogravimetric analysis and sorption capacity for uranyl chlorocomplexes. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2451–2461, 2004     

Synthesis of poly(vinylidene fluoride) (PVdF)/silica hybrids having interpenetrating polymer network structure by using crystallization between PVdF chains

High transparent and homogeneous poly(vinylidene fluoride) (PVdF)/silica hybrids were obtained by using an in‐situ interpenetrating polymer network (IPN) method. The simultaneous formation of PVdF gel resulting from the physical cross‐linking and silica gel from sol–gel process prevented the aggregation of PVdF in silica gel matrix. To form the physical cross‐linking between PVdF chains, the cosolvent system of dimethylformaide (DMF) and γ‐butyrolactone was used. The obtained PVdF/silica hybrids had an entangled combination of physical PVdF gel and silica gel, which was called a “complete‐ IPN” structure. The physical cross‐linking between PVdF chains in silica gel matrix was confirmed by differential scanning calorimetry (DSC) measurements. The miscibility between PVdF and silica phase was examined by scanning electron microscopy (SEM) and tapping mode atomic force microscopy (TM‐AFM) measurements. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3543–3550, 2005     

Polysiloxanes polymers with hyperbranched structure and multivinyl functionality

Hyperbranched polysiloxane polymers with multivinyl functionality were designed and synthesized through a “one‐step and one‐pot” deactivation enhanced atom transfer polymerization (DE‐ATRP) approach from the copolymerization of polydimethylsiloxane (PDMS) macromonomers and divinylbenzene (DVB). Various feed ratios of siloxane‐based monomer and divinyl monomers were investigated. We showed that even at DVB concentrations as high as 80 mol % in the feed, 65% yield of hyperbranched polymer could be obtained without gelation because the DE‐ATRP suppressed the rapid formation of macronetwork structures. The molecular weight, polydispersity, macromolecular structure of hyperbranched poly(DVB‐co‐PDMS) as well as its viscosity in silicone oil were characterized by GPC‐MALLS, ¹H NMR and rheometer. By tracking the relationship between the radius of gyration, elution volume and molecular weight from MALLS analysis, solid evidences of the highly branched and condensed structure of the polymers were obtained. Furthermore, the oil thickening experiments demonstrate that this hyperbranched polymer can act as a well‐controlled viscosity‐modifier for Silicone oils, which potentially will have important application in coating, cosmetic and pharmaceutical products. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Characterization of resulting network polymer precursors in stepwise crosslinking diepoxide/diamine polymerization

Our previous mechanistic discussion of network formation in chainwise crosslinking multiallyl polymerization was extended to stepwise crosslinking diepoxide/diamine polymerization, typically including bisphenol‐A diglycidyl ether (BADGE) and 4,4′‐diaminodiphenylmethane (DDM). In allyl polymerization a monomer chain transfer is an essential termination reaction, providing only oligomeric primary polymer chains. Therefore, crosslinking multiallyl polymerization could be in the category of a classical gelation theory. Thus, the gelation behavior was discussed by comparing the actual gel point with the theoretical one. Then the resulting network polymer precursors (NPPs) were characterized by size‐exclusion chromatography‐multiangle laser light scattering‐viscometry to clarify the stepwise crosslinking BADGE/DDM polymerization mechanism. Notably, the intrinsic viscosity ratio [η]_NPP/[η]_Linear tended to decrease with the progress of crosslinking and finally, it reached less than 0.2. This suggests that the structure of resulting NPP becomes dendritic at a conversion close to the gel point. These dendritic NPPs can collide with each other to form crosslinks between NPPs, eventually leading to gelation as a reflection of the high concentration of NPP. The dilution effect on gelation was marked in polar solvent; no gelation was observed at a dilution of 1/5. However, in nonpolar solvent the gelation was promoted by dilution; this is ascribed to enhanced crosslink formation between NPPs through hydrogen bonding due to abundant hydroxyl groups in the NPP generated by the polyaddition reaction. Finally, the subject of “Is cured epoxy resin inhomogeneous?” is briefly discussed. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

A Monte Carlo study of the coil-to-globule transition of model polymer chains near an attractive surface

When a polymer chain in solution interacts with an atomically smooth solid substrate, its conformational properties are strongly modified and deviate substantially from those of chains in bulk. In this work, the interplay of two competing transitions that affect the conformations of polymer chains near an energetically attractive surface is studied by means of Monte Carlo simulations on a cubic lattice. The transition from an extended to a compact conformation of a polymer chain near an attractive wall, as solubility deteriorates, exhibits characteristics akin to the “coil-to-globule” transition in bulk. An effective θ-temperature is determined. Its role as the transition point is confirmed in a variety of ways. The nature of the coil-to-compact transition is not qualitatively different from that in the bulk. Adsorbed polymer chains may assume “globular” or “pancake” configurations depending on the competition among adsorption strength, cohesive energy, and entropy. In a very relevant range of conditions, the dependence of the adsorbate thickness on chain-length is intermediate between that of 3-d (“semidroplets”) and 2-d (“pancake”) objects. The focus of this study is on rather long polymer chains. Several crucial features of the transitions of the adsorbed chains are N-dependent and various aspects of the adsorption and “dissolution” process are manifested clearly only at the “long chain” limit. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 2462–2476, 2009     

Polystyrene microspheres having epoxy functional dangling chains linked by hydrolytically stable bonds via ATRP

We report application of copper‐mediated atom transfer radical polymerization in graft copolymerization of glycidyl methacrylate (GMA) from N‐bromosulfonamide groups on polystyrene‐divinyl benzene (PS‐DVB) microspheres (210–420 μm). The surface initiator groups were introduced by simple modification of crosslinked PS‐DVB (10% mol/mol) beads in three steps: (i) chlorosulfonation, (ii) sulfamidation with propylamine, and (iii) bromination. Initiation from surface‐bound N‐bromosulfonamide groups showed first‐order kinetics (k = 1.04 × 10^?4 s^?1 in toluene at 70 °C) and gave poly(GMA) graft chains linked to the surface by hydrolytically stable sulfonamide bonds. High graft yields were attained (up to 294.4% within 21 h) while retaining the epoxy groups. Epoxy content of the resulting product (5.41 mmol g^?1) revealed an average 17 GMA repeating units in the graft per initiation site. Taking advantage of the hydrolytic stability of sulfonamide linkages and well‐known reactivity of the epoxy groups on dangling chains, “the hair‐like structure” of the polymer beads prepared can be considered when devising more efficient functional polymers as catalysts or reagent carriers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6708–6716, 2006     

Control of porosity in hierarchically porous polymers derived from hyper‐crosslinked block polymer precursors

We report an approach to control the pore characteristics of hierarchically porous polymers (HPPs) containing micropores in a well‐defined 3D continuous mesoporous framework, by the hyper‐crosslinking reaction of a crosslinked block polymer precursor polylactide‐b‐poly(vinylbenzyl chloride‐co‐styrene‐co‐divinylbenzene) (PLA‐b‐P(VBzCl‐co‐S‐co‐DVB)) consisting of bicontinuous PLA and P(VBzCl‐co‐S‐co‐DVB) microdomains. We investigated the hyper‐crosslinking reaction of P(VBzCl‐co‐S‐co‐DVB)s synthesized by reversible addition‐fragmentation chain transfer (RAFT) copolymerization, and then examined the effect of VBzCl, S, DVB, and polylactide macrochain transfer agent (PLA‐CTA) contents in the polymerization mixture on the pore characteristics of the HPPs. We demonstrate that while the VBzCl content responsible for the hyper‐crosslinking reaction primarily governs microporosity, the DVB content has a strong influence on the mesopore structure, as it determines the onset of the gelation of the polymerization mixture, which arrests the emerging disordered bicontinuous morphology induced by the polymerization‐induced microphase separation process. Because the PLA microdomains template the percolating mesoporous space, mesoporosity was mainly controlled by the PLA‐CTA contents. The synergistic combination of hyper‐crosslinking and block polymer self‐assembly in the HPP formation provided a highly reinforced mesoporous framework, stable against pore collapse, and interconnected mesopores. These facilitated diffusion to the microporous surfaces, suggesting its utility for advanced absorbents and catalytic supports. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 900–913     

Tadpole‐shaped amphiphilic copolymers prepared via RAFT polymerization and click reaction

The tadpole‐shaped amphiphilic copolymers with cyclic polystyrene as the head and a linear poly(N‐isopropylacrylamide) as the tail have been successfully synthesized by combination of reversible addition‐fragmentation chain transfer (RAFT) polymerization and “click” reaction. The synthesis involves two main steps: (1) preparation of a linear acetylene‐terminated PNIPAAM‐b‐PS with a side azido group anchored at the junction between two blocks; (2) intramolecular cyclization reaction to produce the cyclic PS block using “click” chemistry under high dilution. The structures, molecular weights, and molecular weight distributions of the resulted intermediates and the target polymers were characterized by their ¹H NMR, FTIR, and gel permeation chromatography. The difference of surface property between tadpole‐shaped polymer and its linear precursor was observed, and the water contact angles on the former surface are larger than that of the latter surface. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2390–2401, 2008     

Efficient synthesis of well‐defined amphiphilic cylindrical brushes polymer with high grafting density: Interfacial “Click” chemistry approach

Reported here is a novel approach toward efficient preparation of well‐defined cylindrical brushes polymer (CBPs) with both hydrophobic and hydrophilic side chains connected to the linear backbone by interfacial “click” chemistry in two immiscible solvents. The CBPs with high grafting density of more than 95% and molecular polydispersity (M_w/M_n) less than 1.12 can be readily synthesized using present approach. On contrary, the CBPs synthesized from the “click” reaction in a single solvent in homogenous state have low grafting density of less than 55% and molecular polydispersity (M_w/M_n) more than 1.78. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Dendronized polystyrene via orthogonal double‐click reactions

Dendronized copolymers bearing two different dendrons as side chains have been synthesized using a modular orthogonal “double‐click” reaction based strategy. The orthogonality of the Huisgen‐type azide‐alkyne cycloaddition and the Diels–Alder reaction was utilized to attach different dendrons to the polymer backbone via the “graft‐to” strategy. First through third generations of polyaryl ether dendrons appended with an alkyne group and polyester dendrons possessing a furan‐protected maleimide group at their focal point were reacted with a styrene based copolymer containing azide and anthracene moieties as side chains. The efficiency and selectivity of the orthogonal dendronization of the copolymers were examined via various analytical methods such as ¹H NMR spectroscopy, FTIR and gel permeation chromatography. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5029–5037     

Nanocomposite hydrogel consisting of Na‐montmorillonite with enhanced mechanical properties

A new kind of nanocomposite (NC) hydrogel with Na‐montmorillonite (MMT) is presented in this article. The NC hydrogels were synthesized by free radical copolymerization of acrylamide and (3‐acrylamidopropyl) trimethylammonium chloride (ATC) in the presence of MMT and N,N′‐methylene‐bis‐acrylamide used as chemical cross‐linker. Due to the cation‐exchange reaction between MMT and ATC (cationic monomer) during the synthesis of NC hydrogels, MMT platelets were considered chemical “plane” cross‐linkers, different from “point” cross‐linkers. With increasing amount of MMT, the crosslinking degree enhanced, causing a decrease of the swelling degree at equilibrium. Investigations of mechanical properties indicated that NC hydrogels exhibited enhanced strength and toughness, which resulted from chemical interaction between exfoliated MMT platelets and polymer chains in hydrogels. Dynamic shear measurements showed that both storage modulus and loss modulus increased with increasing MMT content. The idea described here provided a new route to prepare hydrogels with high mechanical properties by using alternative natural Na‐MMT. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1020–1026     

Formation of the porous structure during the polymerization of meta-divinylbenzene and para-divinylbenzene with toluene and 2-ethylhexanoic acid (2-EHA) as porogens

Macroporous polymers of pure meta-divinylbenzene (meta-DVB) and pure para-divinylbenzene (para-DVB) have been prepared in the presence of toluene and 2-EHA as pore forming agents. The formation of the pore structure has been studied during the polymerization by pore-size distribution measurements, together with determination of the specific surface area from nitrogen sorption isotherms using the BET treatment. In addition, the morphology and texture have been characterized by SEM during the polymerization process. Large differences in the pore-size distribution among all the polymer samples are found. The polymers prepared in toluene as porogen have a pore-size distribution, which mainly consists of small pores, while large pores appear with 2-EHA as porogen. In the presence of 2-EHA, a major change in the pore-size distribution is also observed when the monomer is shifted from para-DVB to meta-DVB, leading to a bimodal distribution. The texture characterization by SEM shows details and discriminates the samples in consistency with what may be expected from pore-size distribution measurements. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3973–3990, 1999     

Short‐time elasticity of polymer melts: Tobolsky conjecture and heterogeneous local stiffness

An extended molecular‐dynamics study of the short‐time “glassy” elasticity exhibited by a polymer melt of linear fully‐flexible chains above the glass transition is presented. The focus is on the infinite‐frequency shear modulus G_∞ manifested in the picosecond time scale and the relaxed plateau G_p reached at later times and terminated by the structural relaxation. The local stiffness of the interactions with the first neighbors of each monomer exhibits marked distribution with average value given by G_∞. In particular, the neighborhood of the end monomers of each chain are softer than the one of the inner monomers, so that G_∞ increases with the chain length. G_p is not affected by the chain length and is largely set by the nonbonding interactions, thus confirming for polymer melts the conjecture formulated by Tobolsky for glassy polymers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1401–1407     

Flexible transparent fluorinated nanohybrid with innovative heat‐resistance property—new technology proposal for fabrication of transparent materials using “crystalline” polymer

A new technology for the production of transparent material, using a “crystalline” polymer, is proposed in this study. In addition, a heat‐resistant transparent flexible plastic film with a high hydrophobic surface and a thermal decomposition temperature near 400 °C was created. Partially fluorinated crystalline polymer with switchboard‐type lamellae results high transparency as a consequence of the formation of a high‐density amorphous structure based on high‐temperature drawing just below the melting point at 250 °C. Melt‐compounding with montmorillonite modified by the long‐chain quaternary phosphonium with high coverage induces formation of a nanohybrid that retains transparency and also results in an increase in the thermal degradation temperature by over 50 °C. Through this technology, which results in heat‐resistance, transparency, and flexibility, the nano‐micro‐millimeter structures of solid‐state polymers are hierarchically controlled, which enables the creation of new materials. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1674–1690     

Preparation of macroporous functionalized polymer beads by a multistep polymerization and their application in zirconocene catalysts for ethylene polymerization

Macroporous functionalized polymer beads of poly(4‐vinylpyridine‐co‐1,4‐divinylbenzene) [P(VPy‐co‐DVB)] were prepared by a multistep polymerization, including a polystyrene (PS) shape template by emulsifier‐free emulsion polymerization, linear PS seeds by staged template suspension polymerization, and macroporous functionalized polymer beads of P(VPy‐co‐DVB) by multistep seeded polymerization. The polymer beads, having a cellular texture, were made of many small, spherical particles. The bead size was 10–50 μm, and the pore size was 0.1–1.5 μm. The polymer beads were used as supports for zirconocene catalysts in ethylene polymerization. They were very different from traditional polymer supports. The polymer beads could be exfoliated to yield many spherical particles dispersed in the resulting polyethylene particles during ethylene polymerization. The influence of the polymer beads on the catalytic behavior of the supported catalyst and morphology of the resulting polyethylene was investigated. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 873–880, 2003     

Self‐sustained entropy‐driven flow in nano‐confined polymer melts

We present a Monte Carlo simulation study of the Brownian motion of polymer chains in a melt confined in a periodically asymmetric channel of nanometric dimensions. We assume no friction between the chains and the channel. A detailed analysis of the conformations of the chains reveals the presence of a favorable entropy gradient along the easy flow direction. For high molecular weight chains, this gradient is seen to drive a self‐sustained polymer flow with Peclet numbers as high as 0.9, which makes our observation experimentally accessible. Much weaker efficiences are observed at low molecular weights. We show that the unexpected directed Brownian motion of polymers in confined geometries is of significant importance in the design and stabilization of platelet nanocomposites which typically age over time under quiescent conditions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 869–875     

“Grafting through” polymerization involving surface-bound monomers

“Grafting through” polymerization represents copolymerization of free monomers in solution and polymerizable units bound to a substrate. Free polymer chains are formed initially in solution and can incorporate the surface-bound monomers, and thereby, get covalently bonded to the surface during the polymerization process. As more growing chains attach to the surface-bound monomers, an immobilized polymer layer is formed on the surface. We use a combination of computer simulation and experiments to comprehend this process for monomers bound to a flat impenetrable substrate. We concentrate specifically on addressing the effect of spatial density of the surface-bound monomers on the formation of the surface-attached polymers. We employ a lattice-based Monte Carlo model utilizing the bond fluctuation model scheme to provide molecular-level insight into the grafting process. For experimental validation, we create gradients of density of bound methacrylate units on flat silicon wafers using organosilane chemistry and carry out “grafting through” free radical polymerization initiated in bulk. We report that the proximity of the surface-bound polymerizable units promotes the “grafting through” process but prevents more free growing chains to “graft through'' the polymerizable units. The “grafting through” process is self-limiting in nature and does not affect the overall density of the surface-bound polymer layer, except in case of the highest theoretical packing density of surface-bound monomers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016, 54, 263–274