Enhanced electrostriction based on plasticized relaxor ferroelectric P(VDF‐TrFE‐CFE/CTFE) blends

The purpose of this work aims at enhancing the electrostrictive strain response and the mechanical energy density under moderate electric field, which is essential for actuator applications. For achieving this, plasticized effects as well as the influence of chlorofluoroethylene and chlorotrifluoroethylene defects on the electromechanical behavior of the copolymer matrix poly(vinylidene fluoride‐trifluoroethylene) (P(VDF‐TrFE)) are investigated. Experimental results showed that the plasticized terpolymer‐based CFE presented better electrical and mechanical performances than the CTFE one. Furthermore, such interesting properties exhibited superior advantages when CFE was combined with (DEHP) plasticizer, resulting in excellent electrostrictive strain response as well as mechanical energy density. Another aspect of this work reports on the influence of the composition, especially the CTFE content, on the electromechanical properties of the neat and plasticized P(VDF‐TrFE‐CTFE). This enables the determination of the desired terpolymer compositions for given applications, which are based on different criteria, such as crystallinity, elastic modulus, dielectric permittivity, and so forth. All the results demonstrated a possibility to realize high performance electroactive polymer actuators while achieving significant improved strain response and energy density under relatively low electric field. Such an investigation allows overcoming the current technological barrier of conventional electroactive polymers that suffer from the high applied electric field usually required to reach sufficient strain. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1368–1379     

Reciprocated suppression of polymer crystallization toward improved solid polymer electrolytes: Higher ion conductivity and tunable mechanical properties

Solid polymer electrolytes based on lithium bis(trifluoromethanesulfonyl) imide and polymer matrix were extensively studied in the past due to their excellent potential in a broad range of energy related applications. Poly(vinylidene fluoride) (PVDF) and polyethylene oxide (PEO) are among the most examined polymer candidates as solid polymer electrolyte matrix. In this work, we study the effect of reciprocated suppression of polymer crystallization in PVDF/PEO binary matrix on ion transport and mechanical properties of the resultant solid polymer electrolytes. With electron and X‐ray diffractions as well as energy filtered transmission electron microscopy, we identify and examine the appropriate blending composition that is responsible for the diminishment of both PVDF and PEO crystallites. A three‐fold conductivity enhancement is achieved along with a highly tunable elastic modulus ranging from 20 to 200 MPa, which is expected to contribute toward future designs of solid polymer electrolytes with high room‐temperature ion conductivities and mechanical flexibility. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1450–1457     

Thiophene π bridge effect on bulky side‐chained benzodithiophene‐based photovoltaic polymers

Recently, we have used terthiophene side chain to modify benzo[1,2‐b:4,5‐b′]dithiophene (BDT) to form novel building block for BDT polymers. In this paper, this building block is used to copolymerized with thieno[3,4‐c]pyrrole‐4,6‐dione (TPD) and thieno[3,4‐b]thiophene (TT). This building block and TPD‐ or TT‐based polymers (P1 and P3) show high open circuit voltage (V_OC) (ca. 0.9–0.95 V) and low energy loss (E_g–eV_OC) in solar cells devices compared with similar polymers without bulky side chain. We further introduce thiophene π bridge into these polymers backbone to form two other polymers (P2 and P4). We find this thiophene π bridge does contribute to this bulky side chained benzodithiophene polymer photovoltaic performances, especially for power conversion efficiencies (PCEs). The polymer solar cells (PSCs) performances are moderate in this article due to the serious aggregation in the PSCs active layer. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1615–1622     

Strain effects on an electrostrictive polymer composite for power harvesting: experiments and modeling

In the field of vibrational energy harvesting, the electromechanical conversion demonstrated the many advantages of using electrostrictive polymers. These materials present advantageous features such as high productivity and high flexibility. The aim of this work is to provide a solution for artificially increasing the current flowing through the sample when simultaneously driven by an electrical field and a mechanical excitation in order to determine the optimal range of deformation for a good efficiency of the electromechanical conversion. Thus, by using the fast Fourier transform (FFT) analysis, our experimental results, shown clearly that under certain conditions of strain S (S?4 %), the efficiency of energy harvesting becomes significant, indicating that the mechanical parameter S was a crucial parameter for a better efficiency of electromechanical conversion. Furthermore, a good agreement between theoretical and experimental results was found. Copyright © 2015 John Wiley & Sons, Ltd.     

Environmentally Stable Polymer Gels with Super Deformability and High Recoverability Enhanced by Sub‐5 nm Particles in the Nonvolatile Solvent

It remains challenging to satisfy the combined performances for hydrogels with excellent mechanical behavior, high deformability, and super recoverability under harsh environmental conditions. In this study, we first established a strong polymer network via the crosslinking of polymer chains on the surfaces of sub‐5‐nm calcium hydroxide nanospherulites in ethylene glycol solvent. The organic gel expressed excellent mechanical properties such as a recoverable compressive engineering stress of 249 MPa and an elongation stress of 402 KPa, which was attributed to the uniform nanosized crosslinking structure as characterized by SEM. Moreover, the nonvolatile solvent remained in the gel, meaning that the sample can resist a wide temperature range of ?56 to 100 °C without losing the elastic properties. This novel organic gel could provide promising routes to develop the ideal elastic carriers for wearable devices, smart skin sensors, and damping materials. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 713–721     

Time‐dependent deformation of structurally chiral polymer networks in stabilized cholesteric liquid crystals

Polymerization of crosslinkable liquid crystal monomers in chiral liquid crystalline media stabilizes the phase and enables distinct electro‐optic properties relative to small‐molecule analogs. Particularly interesting are cases where the polymerization forms a crosslinked polymer network that maintains a “structural” chirality. Recent reports have employed this methodology to realize a diverse set of electro‐optic responses in polymer stabilized cholesteric liquid crystals (PSCLCs) including reflection bandwidth broadening, reflection wavelength tuning, and dynamic scattering modes. It has been proposed that the mechanism at the root of these electro‐optic responses is an ion‐mediated, electromechanical deformation of the stabilizing and structurally chiral polymer network. In an effort to better understand the nature of these deformations, here we have characterized the electro‐optic response of PSCLCs with different polymer concentrations and crosslink densities. The dynamic response of PSCLCs to electric fields exhibits a time‐dependent behavior reminiscent of the creep of polymeric materials to mechanical deformations. The electro‐optic response can be described as the superposition of two contributions: the fast deformation of a relatively soft component of the polymer network (1–2 s) and the slower (10–20 s) deformation of a harder component. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1087–1093     

Synthesis,characterization, and application to polymer solar cells of polythiophene derivatives with ester‐ or ketone‐substituted phenyl side groups

Four polythiophene derivatives including regiorandom polymers P1 , P2 , and P3 and a regioregular polymer P4 , containing a phenyl side chain with electron‐withdrawing carbonyl groups such as an ester and a ketone at the 3‐position of the thiophene ring, were synthesized by Stille coupling reaction. Bulk‐heterojunction polymer solar cells (PSCs) based on these polymers as p‐type semiconductors and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM) were fabricated, and their photovoltaic performances were evaluated for the first time. The PSC devices based on the regioregular polymer P4 :PCBM = 1:2 (w/w) exhibited a high‐open‐circuit voltage (V_oc) of 0.943 V because of the low‐lying highest occupied molecular orbit energy level of P4 . The short π–π stacking distance (0.355 nm) in the parallel direction to the substrate and “face‐on” rich orientation were observed by the grazing incidence wide‐angle X‐ray scattering experiment, which might reflect higher J_sc and FF values of the P4 :[6,6]‐phenyl‐C₇₁‐butyric acid methyl ester (PC₇₁BM) PSC device than others. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 875–887     

High temperature creep behavior of phosphoric acid‐polybenzimidazole gel membranes

This work investigates the effects of polymer solids content and macromolecular structure on the high temperature creep behavior of polybenzimidazole (PBI) gel membranes imbibed with phosphoric acid (PA) after preparation via a polyphosphoric acid (PPA) mediated sol‐gel process Low‐solids, highly acid‐doped PBI membranes demonstrate outstanding fuel cell performance under anhydrous, ambient pressure, and high temperature (120–200 °C) operating conditions. However, PBI membranes are susceptible to creep under compressive loads at elevated temperatures, so their long‐term mechanical durability is a major concern. Here, we report results for the creep behavior of PBI membranes subject to compression at 180 °C. For para‐ and meta‐PBI homopolymers, increasing polymer solids content results in lower creep compliance and higher extensional viscosity, which may be rationalized by increasing chain density in the sol‐gel network. Comparing various homo‐ and copolymers at similar solids loading, differences in creep behavior may be rationalized in terms of chain–chain and chain‐solvent interactions that control macromolecular solubility and stiffness in the PA solvent. The results demonstrate the feasibility of improving the mechanical properties of PA‐doped PBI membranes by control of polymer solids content and rational design of PBI macromolecular structure. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1527–1538     

Tuning the electronic properties of conjugated polymer by tethering low‐bandgap rhenium(I) complex on the main chain

Low‐bandgap rhenium(I) complex with absorption onset at 795 nm in solution was tethered onto π‐conjugated polymer. The conjugated copolymer provides solution processability of the metallopolymer, and the pendant allows the low energy‐absorbing Re(I) complex units to be evenly distributed on the thin film. The copolymer tethered with low‐bandgap rhenium complex was synthesized by Suzuki cross‐coupling reaction. The metal‐free polymer ( poly‐1 ) tethered with functionalized intramolecular charge transfer dye, 2‐phenyl‐3‐pyridin‐2‐yl‐5,7‐di‐2‐thienylthieno[3,4‐b]pyrazine, exhibited high molecular weight, good film‐forming properties, and excellent solution processability. The pendants of the conjugated polymer possess donor–acceptor characters and broaden the absorption band. These pendants can function as bidentate ligands for metal chelation. The solubilizing groups on the monomers provide good solubility to the polymer even with high content of metal chelation. Upon the complexation with rhenium(I) pentacarbonyl chloride, the absorption spectrum of the resulting metallopolymer was further extended toward the near‐infrared region. Photovoltaic performances based on this metallopolymer have been studied. The design approach of these metallopolymers provides synthetic feasibility for coordinating wide range of metal ions on the pendant, and the resulting low‐bandgap polymer can be a potential candidate for light harvesting material in solar cell applications. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2311–2319, 2010     

Greatly enhanced thermo‐oxidative stability of polybenzoxazine thermoset by incorporation of m‐carborane

Novel polybenzoxazine precursor containing m‐carborane unit in the main‐chain has been firstly synthesized through click reaction of diazidomethyl m‐carborane (DAMC) and diacetylene bisbenzoxazine (DABB). Meanwhlie, the traditional polybenzoxazine precursor was also prepared through click reaction of diazidomethyl p‐benzene (DAPB) and DABB as a control. 1H NMR was used to confirm the structures of the monomers and the resulting polymers. FT‐IR and differential scanning calorimetry (DSC) were used to study the curing behavior of carborane‐containing benzoxazine polymer (CCBP). Dynamic mechanical analysis (DMA) study demonstrated that the cured CCBP had high storage moduli and high Tg. Thermogravimetric analysis (TGA) and ablation test showed that the cured CCBP had outstanding thermo‐oxidative stability. During thermal ablation of cured CCBP, organic material was degraded, and a passivation layer with oxidized m‐carboranes was formed, which prevented the underlying polymer from further degradation. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 973–980     

Rational design of methacrylate monomers containing oxadiazole moieties for single‐layer organic light emitting devices

Methacrylate derived monomers functionalized with pendant oxadiazole moieties were synthesized and copolymerized with carbazole containing monomers to form polymers with electron and hole transporting fragments in the same molecule. Substituents on the oxidazole moiety were varied with the purpose of bandgap tuning and performance optimization when employed in single‐layer organic light emitting devices (OLED). Quantum mechanical calculations of the HOMO‐LUMO levels of the oxidazole derivatives were used to down‐select promising candidates for chemical synthesis and testing in single‐layer OLEDs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1663–1673     

A low bandgap polymer based on isoindigo and bis(dialkylthienyl)benzodithiophene for organic photovoltaic applications

A new conjugated polymer PBDTT‐ID based on N‐alkylated isoindigo (ID) and bis(2,3‐dialkylthienyl)‐substituted benzo[1,2‐b:4,5‐b′]dithiophene (BDTT) as repeating units was synthesized. It had an optical bandgap of 1.56 eV and a highest occupied molecular orbital (HOMO) energy level of ?5.71 eV. The optical, electrochemical, and photovoltaic properties of new polymer were compared with previous reported polymer PBDT‐ID , which was based on bis(alkoxy)‐substituted benzo[1,2‐b:4,5‐b′]dithiophene. The new polymer displayed lower HOMO energy level and better absorption properties than polymer PBDT‐ID . The solar cells fabricated with PBDTT‐ID /PC₆₁BM (1:2, w/w) blends as active layers exhibited photoresponse in the range of 300–800 nm. A power conversion efficiency of 4.02% and an open circuit voltage (V_oc) of 0.94 V were achieved in polymer solar cell device based on the new polymer. This was the highest V_oc realized among the isoindigo‐based polymers. The relatively high performances of new polymer in solar cell devices were interpreted in terms of material properties and morphologies of polymer/PCBM blends. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Degradation mechanisms of polyfluorene‐based organic semiconductor lasers under ambient and oxygen‐free conditions

In this communication we investigate the degradation mechanisms of different highly fluorescent polyfluorenes for applications as active organic semiconductor material in laser devices. Using various analytical methods, like Ultraviolet‐Visible (UV‐Vis) absorption spectroscopy, Fourier‐transform infrared spectroscopy (FT‐IR) and time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS), we investigate photo‐induced degradation mechanisms. It is shown that the photo‐oxidation rate decreases with an increasing number of benzothiadiazole units within the conjugated polymer. Photooxidation is much more distinct for poly[9,9‐dioctylfluorenyl‐2,7‐diyl] (PFO) than for poly[(9,9‐dioctylfluorenyl‐2,7‐diyl)‐alt‐co‐(1,4‐benzo‐{2,1′,3}‐thiadiazole)] (F8BT). The influence of the photooxidation on the lifetime of the organic laser devices is not as profound as previously assumed, since the laser shuts down before any evidence of photo‐oxidation in F8BT manifests. We observe that the solubility of the material is different at various degradation levels and we consider chain scission of excited bonds and cross‐linking as dominant degradation factors. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1029–1034     

Synthesis and photovoltaic properties of two‐dimensional copolymers based on novel benzothiadiazole and quinoxaline acceptors with conjugated dithienylbenzothiadiazole pendants

Two novel acceptors of benzo[c][1,2,5]thiadiazole and quinoxaline with conjugated dithienylbenzothiadiazole pendants were first designed and synthesized for building efficient photovoltaic copolymers. Based on benzo[1,2‐b;3,4‐b′]dithiophene donors and the two acceptors, two new copolymers have been prepared by Stille coupling polymerization. The resulting copolymers were characterized by ¹H NMR, gel permeation chromatography, and thermogravimetric analysis. UV–Visible absorption and cyclic voltammetry measurements indicated that the two copolymers possessed strong and broad absorption in the range of 300–700 nm, and deep‐lying energy levels of highest occupied molecular orbitals. The polymer photovoltaic devices based on benzo[c][1,2,5]thiadiazole‐based copolymer/phenyl‐C₇₁‐butyric acid methyl ester exhibited a power conversion efficiency of 2.42%, attributed to its relatively better light‐harvesting ability and active film morphology. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 668–677     

Boron subphthalocyanine polymers: Avoiding the small molecule side product and exploring their use in organic light‐emitting diodes

In this study, we set out the steps to efficiently synthesize boron subphthalocyanine (BsubPc)‐containing polymers while circumventing the formation of a known side product. The synthesis was achieved using the post‐polymerization coupling reaction of a carboxylic acid functional prepolymer with bromo‐BsubPc. We have earlier shown that when copolymerizing styrene and acrylic acid (AA) a significant amount of an undesired side product is formed. In this study, we have determined that this side product persisted when styrene was copolymerized with AA or n‐butyl acrylate but could be avoided when styrene was copolymerized with methacrylic acid (MAA), methyl methacrylate, or acrylonitrile. Therefore, MAA/styrene copolymer, synthesized by nitroxide‐mediated polymerization was chosen to be coupled to BsubPc. The resulting BsubPc polymer was found to have similar electrochemical properties, solution state absorption and photoluminescence characteristics when compared against a small molecule model compound although the solid‐state PL emission of the polymer was found to be excitation wavelength dependent. Finally, preliminary organic light‐emitting diodes (OLEDs) were fabricated to assess the potential role(s) of the BsubPc polymer in organic electronic devices. These OLEDs represent the first‐solution processed organic electronic devices containing BsubPc polymers as a functional material. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1996–2006     

Poly[N‐(10‐oxo‐2‐vinylanthracen‐9(10H)‐ylidene)cyanamide] as a novel cathode material for li‐organic batteries

Redox‐active polymers draw significant attention as active material in secondary batteries during the last decade. A new anthraquinone‐based redox‐active monomer was designed, which electrochemical behavior was tailored by mono‐modification of one keto group. The monomer exhibits two one‐electron redox reactions and has a low molar mass, resulting in a high theoretical capacity of 207 mAh/g. The polymerization of the monomer was optimized by variation of solvent and initiator. Moreover, the electrochemical behavior was studied using cyclic voltammetry and the polymer was used as active material in a composite electrode in lithium organic batteries. The polymer reveals a cell potential of 2.3 V and a promising capacity of 137 mAh/g. During the first 100 cycles, the capacity drops to 85% of the initial value. The influence of the charging speed on the charging/discharging properties of the batteries was further investigated. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2517–2523     

Preparation and characterization of novel transparent plasticized poly(butylene terephthalate)‐co‐poly(alkylene glycol terephthalate) gel

Transparent plasticized gels with good mechanical, optical, and dielectric properties have important applications in various fields. We prepared a new gel using a poly(butylene terephthalate)‐co‐poly(alkylene glycol terephthalate) (PBT‐co‐PAGT) copolymer and a plasticizer, dibutyl adipate (DBA). This method improved the polymer crystallinity, and suppressed particle formation in cast‐films when the polymer was dissolved in 1,1,1,3,3,3‐hexafluoro‐2‐propanol, followed by solvent evaporation, and enabled uniform swelling of the polymer network by the plasticizer to form a transparent and flexible gel. The dielectric constants of the developed PBT‐co‐PAGT/DBA gels are much higher than those of PBT‐co‐PAGT films at low frequency. We believe that these PBT‐co‐PAGT/DBA gels could be used as photovoltaic, dielectric, and actuator materials. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 829–832     

Influence of 4‐fluorophenyl pendants in thieno[3,4‐b]thiophene‐benzo[1,2‐b:4,5‐b′]dithiophene‐based polymers on the performance of photovoltaics

Polymers consisting of benzo[1,2‐b:4,5‐b′]dithiophene and thieno[3,4‐b]thiophene units (PTB‐based polymers), either fully or partially containing 4‐fluorophenyl pendants, are synthesized as electron donor materials for inverted‐type polymer solar cells (PSCs). The influence of the 4‐fluorophenyl pendant content on the thermal and optical properties, the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO), the hole mobilities, and photovoltaic performances are investigated. As the 4‐fluorophenyl pendant content increased, the HOMO and LUMO of the polymers were deepened proportionally and the open‐circuit voltages of the PSCs improved. Incorporation of 4‐fluorophenyl pendants into the polymers also affected the crystallinity, orientation, and compatibility with [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester in the active layers, leading to nonlinearities in the short‐circuit current densities, and fill factors. The incorporation of an appropriate number of 4‐fluorophenyl pendants enhanced the power conversion efficiencies of the PSC devices from 2.25 to 3.96% for identical device configurations. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1586–1593