Synthesis and polymerizations of phosphonated‐bis(methacrylamide)s for dental applications

Novel phosphonate and phosphonic acid‐containing bis(methacrylamide)s were synthesized. The phosphonate‐containing monomers ( 1a and 1b ) were synthesized by amidation of 2‐(2‐chlorocarbonyl‐allyloxymethyl)‐acryloylchloride with diethyl 2‐aminoethylphosphonate and diethyl 1‐aminomethylphosphonate. The phosphonic acid‐containing monomers ( 2a and 2b ) were synthesized by hydrolysis of 1a and 1b with trimethylsilyl bromide (TMSBr). All monomers were liquids and dissolved in water and ethanol. Thermal homopolymerization of 1a and 1b in bulk and solution using 2,2′‐azobis(isobutyronitrile) (AIBN) at 80 °C gave crosslinked polymers indicating low cyclization tendencies of these monomers. They were also homopolymerized using photo‐DSC with 2,2′‐dimethoxy‐2‐phenyl acetophenone (DMPA) as photoinitator, and their maximum rates of polymerization were found to be higher than commercial monomers 2,2‐bis[4‐(2‐hydroxy‐3‐methacryloyloxy propyloxy) phenyl] propane (Bis‐GMA) and 2‐hydroxyethyl methacrylate (HEMA), indicating their potential as reactive diluents or crosslinkers in dental materials. In fact, copolymerization with monomer 1a resulted in improvements in photopolymerization kinetics of both Bis‐GMA and HEMA. The acidic nature of the aqueous solutions (pH of 2a : 1.42, 2b : 1.53), stability under aqueous conditions after 1 month of study at 37 °C, interaction of 2a with hydroxyapatite (HAP) as representative of both monomers, and copolymerizability of the same with HEMA make these monomers suitable as adhesive monomers in dental adhesives, although their low observed reactivities may present a drawback. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis,photopolymerization, and adhesive properties of hydrolytically stable phosphonic acid‐containing (meth)acrylamides

Three novel dental monomers containing phosphonic acid groups ( 1a and 2a , based on diethyl amino(phenyl)methylphosphonate and 3a based on diethyl 1‐aminoheptylphosphonate) were synthesized in two steps: the reaction of α‐aminophosphonates with acryloyl chloride (for monomers 1a and 3a ) or methacryloyl chloride (for 2a ) to give monomers with phosphonate groups, and the hydrolysis of phosphonate groups by using trimethyl silylbromide. Their (and the intermediates') structures were confirmed by FTIR, ¹H, ¹³C, and ³¹P NMR spectroscopy. All the monomers dissolve well in water (1<pH<2) and are hydrolytically stable. Their homo‐ and copolymerizations with 2‐hydroxyethyl methacrylate (HEMA) and HEMA/glycerol dimethacrylate were investigated with photo‐DSC. Thermal polymerization of the new monomers in water or in ethanol/water solution was investigated, giving polymers in good yields. X‐ray diffraction results showed only dicalcium phosphate dehydrate formation upon interaction of 1a ‐ 3a with hydroxyapatite indicating its strong decalcification and that monomer‐Ca salts are highly soluble. Some results were also compared to those with a bisphosphonic acid‐containing methacrylamide ( 4a ) previously reported; and the influence of monomer structure on polymerization/adhesive properties is discussed. These properties, especially hydrolytic stability and good rates of polymerization, make these new monomers suitable candidates as components of dental adhesive mixtures. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 511–522     

Synthesis and evaluation of new dental monomers with both phosphonic and carboxylic acid functional groups

Novel dental monomers containing both phosphonic and carboxylic acid functional groups were prepared. The monomers were based on t‐butyl α‐bromomethacrylate (t‐BuBMA) and synthesized in three steps: The reaction of o‐hydroxyaryl phosphonates [diethyl (2‐hydroxyphenyl) phosphonate, tetraethyl (2,5‐dihydroxy‐1,4‐phenylene) diphosphonate and tetraethyl 5,5′‐(propane‐2,2‐diyl)bis(2‐hydroxy‐5,1‐ phenylene) diphosphonate] with t‐BuBMA, the hydrolysis of phosphonate groups to phosphonic acid using trimethyl silylbromide, and the hydrolysis of the t‐butyl groups to carboxylic acid with trifluoroacetic acid. The monomers were solids and soluble in water and ethanol. The structures of the monomers were determined by Fourier transform infrared (FTIR), ¹H, ¹³C, and ³¹P nuclear magnetic resonance (NMR) spectroscopy. The copolymerization behaviors of the synthesized monomers with glycerol dimethacrylate were first investigated in bulk using photodifferential scanning calorimetry at 40 °C with 2,2′‐dimethoxy‐2‐phenyl acetophenone as photoinitiator. Then, the solution copolymerization of the monomers with acrylamide in ethanol and water was studied, indicating that the synthesized monomers are incorporated into the copolymers. The acidic nature of the aqueous solutions of these monomers (pH values 1.72–1.87) is expected to give them etching properties important for dental applications. The interaction of the monomers with hydroxyapatite was investigated using ¹³C NMR and FTIR techniques. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1953–1965, 2009     

Synthesis and evaluations of bisphosphonate‐containing monomers for dental materials

Two new bismethacrylamide ( 1 , 2 ) and two new methacrylamide ( 3 , 4 ) dental monomers were synthesized. In each group, one monomer contains a bisphosphonate group, the other a bisphosphonic acid group. Monomer 1 and 3 were synthesized by amidation of 2‐(2‐chlorocarbonyl‐allyloxymethyl)‐acryloylchloride and methacryloyl chloride with tetraethyl aminomethyl‐bis(phosphonate) and converted to the bisphosphonic acid monomers 2 and 4 by hydrolysis with trimethylsilyl bromide. Monomer 1 (m.p.: 71–72 °C), monomer 3 ( 33–34 °C), and monomer 4 (no m.p.) were obtained as white solids and monomer 2 a viscous liquid, soluble in water. Homopolymerization of 1 gave crosslinked polymers, indicating its low cyclization tendency. The photopolymerization studies indicated that its copolymerizability with 2,2‐bis[4‐(2‐hydroxy‐3‐methacryloyloxy propyloxy) phenyl] propane and 2‐hydroxyethyl methacrylate (HEMA) without changing their rates and conversions significantly means that it could be used as a biocompatible crosslinker. Although monomer 2 showed low polymerizability, because of its good performance in terms of solubility, hydrolytic stability, hydroxyapatite interaction, acidity, and copolymerizability with HEMA, it shows potential to be used in self‐etching dental adhesives. The thermal polymerization of 3 resulted in soluble polymers and evaluation of monomer 4 in terms of solubility, acidity, and copolymerizability with HEMA indicated its potential as an adhesive monomer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and polymerization kinetics of acrylamide phosphonic acids and esters as new dentine adhesives

In restorative dentistry, acrylamide monomers bearing phosphonic acid moieties have proved to be useful species for the formulation of dental self‐etch adhesives since they provide enhanced adhesion to hydroxyapatite and are not subject to hydrolysis, thus potentially improving their adhesive durability. Previous studies have demonstrated that phosphonic acid acrylamides increase the rate of photopolymerization of diacrylamide monomers. To understand whether this rate acceleration is specific to the acrylamide function of the monomer, or due to the phosphonic acid group per se, or is applicable only with a crosslinking reaction, we have synthesized several acrylamide and methacrylate monomers bearing phosphonic acid or phosphonate moieties and studied their photopolymerization kinetics. The acrylamide phosphonic acid was found to accelerate the polymerization rate but similar monomers bearing a phosphonate ester group had a much smaller effect. A similar accelerating effect was observed when the phosphonic acid‐based monomers were copolymerized with a monofunctional acrylamide monomer, excluding the possibility that the rate acceleration might be related to the crosslinking process. This rate effect is also observed when a nonpolymerizable organic phosphonic acid is present in the polymerizing medium. We suggest that the increase of the medium polarity is responsible for this rate enhancement effect. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and copolymerization of new phosphorus‐containing acrylates

Two phosphorus‐containing acrylate monomers were synthesized from the reaction of ethyl α‐chloromethyl acrylate and t‐butyl α‐bromomethyl acrylate with triethyl phosphite. The selective hydrolysis of the ethyl ester monomer with trimethylsilyl bromide (TMSBr) gave a phosphonic acid monomer. The attempted bulk polymerizations of the monomers at 57–60 °C with 2,2′‐azobisisobutyronitrile (AIBN) were unsuccessful; however, the monomers were copolymerized with methyl methacrylate (MMA) in bulk at 60 °C with AIBN. The resulting copolymers produced chars on burning, showing potential as flame‐retardant materials. Additionally, α‐(chloromethyl)acryloyl chloride (CMAC) was reacted with diethyl (hydroxymethyl)phosphonate to obtain a new monomer with identical ester and ether moieties. This monomer was hydrolyzed with TMSBr, homopolymerized, and copolymerized with MMA. The thermal stabilities of the copolymers increased with increasing amounts of the phosphonate monomer in the copolymers. A new route to highly reactive phosphorus‐containing acrylate monomers was developed. A new derivative of CMAC with mixed ester and ether groups was synthesized by substitution, first with diethyl (hydroxymethyl)phosphonate and then with sodium acetate. This monomer showed the highest reactivity and gave a crosslinked polymer. The incorporation of an ester group increased the rate of polymerization. The relative reactivities of the synthesized monomers in photopolymerizations were determined and compared with those of the other phosphorous‐containing acrylate monomers. Changing the monomer structure allowed control of the polymerization reactivity so that new phosphorus‐containing polymers with desirable properties could be obtained. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2207–2217, 2003     

Synthesis and polymerization of phosphorus‐containing acrylates

Novel phosphorus‐containing acrylate monomers were synthesized by two different routes. The first involved the reaction of ethyl α‐chloromethyl acrylate and t‐butyl α‐bromomethyl acrylate with diethylphosphonoacetic acid. The monomers were bulk‐ and solution‐polymerized at 56–64 °C with 2,2′‐azobisisobutyronitrile. The ethyl ester monomer showed a high crosslinking tendency under these conditions. The selective hydrolysis of the ethyl ester phosphonic ester compound was carried out with trimethylsilyl bromide, producing a phosphonic acid monomer. In the second route, ethyl α‐hydroxymethyl acrylate and t‐butyl α‐hydroxymethyl acrylate were reacted with diethylchlorophosphate. The bulk homopolymerization and copolymerization of these monomers with methyl methacrylate and 2,2′‐azobisisobutyronitrile gave soluble polymers. The attempted hydrolysis of the monomers was unsuccessful because of the loss of the diethylphosphate group. The relative reactivities of the monomers in the photopolymerizations were also compared. The ethyl α‐hydroxymethyl acrylate/diethylphosphonic acid monomer showed higher reactivity than the other monomers, which may explain the crosslinking during the polymerization of this monomer. The reactivities of other derivatives were similar, but the rates of polymerization were slow in comparison with those of methyl methacrylate. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3221–3231, 2002     

Synthesis and photopolymerizations of first monomers with phosphonate and bisphosphonate or phosphonic and bisphosphonic acid functionalities for potential dental applications

The first monomers containing both phosphonate and bisphosphonate (M1) or phosphonic and bisphosphonic acid (M2) functionalities are synthesized, aiming to improve binding abilities of self-etching adhesive systems and composites: An amine having both phosphonate and bisphosphonate functionalities is prepared via Michael addition reaction between diethyl (6-aminohexyl)phosphonate and tetraethyl vinylidene bisphosphonate, its reaction with 2-isocyanatoethyl methacrylate gives M1 which is converted to M2 by selective dealkylation of the phosphonate/bisphosphonate ester groups. Their copolymerization with commercial dental monomers (bisphenol A glycidyl methacrylate, triethylene glycol dimethacrylate, and 2-hydroxyethyl methacrylate) investigated by photo-differential scanning calorimetry shows adequate photopolymerization rate and conversion. X-ray diffraction, Fourier transform infrared, and X-ray photoelectron spectroscopy analyses of M2-treated hydroxyapatite particles show formation of stable M2-calcium salts. These monomers are assessed to be not toxic according to MTT standards by in vitro cytotoxicity studies with NIH 3T3, U2OS, and Saos-2 cells. All these properties make these monomers potential candidates as biocompatible components for dental adhesives and composites. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2739–2751     

Synthesis and stability study of dental monomers containing methacrylamidoethyl phosphonic acids

Three new dental monomers containing methacrylamidoethyl phosphonic acids were synthesized. The structures of the synthesized monomers were determined with electrospray mass spectrometry (ESMS), Fourier transform infrared, and NMR. The hydrolytic stabilities of the synthesized monomers and a commercial monomer, 2‐methacryloyloxyethyl phosphoric acid (MEP; used as a control), were studied with flow injection (FI)/ESMS, ¹H NMR, and ³¹P NMR analysis of a CD₃OD/D₂O (4:1 v/v) solution of each monomer before and after storage at 60 °C for 2 months. The ¹H NMR and ³¹P NMR chemical shifts of the monomers 2‐methacrylamidoethylphosphonic acid ( I ) and N,N′‐[4,4′‐(propane‐2,2‐diyl)‐bis(phenoxy‐2‐hydroxypropyl)]‐bis(2‐methacrylamidoethylphosphonic acid) ( II ) showed little change after storage at 60 °C for 2 months, but those of MEP changed significantly. FI/ESMS also showed that MEP was nearly completely decomposed, whereas monomers I and II remained largely intact. MEP could react with H₂ZrF₆ to form ternary zirconium fluoride complexes that were partially soluble in methanol, but all the monomers containing phosphonic acids formed precipitates. This study demonstrates that ESMS is a more sensitive and effective method than NMR for studying the hydrolytic stability or degradation of dental monomers. The new monomers containing methacrylamidoethyl phosphonic acids have higher hydrolytic stability than methacrylate phosphate monomers and may be used in dental bonding agents and other dental materials. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 99–110, 2007     

Synthesis and modeling of new phosphorus‐containing acrylates

New methacrylate monomers containing phosphonic acid or both phosphonic and carboxylic acids were synthesized through the reaction of t‐butyl α‐bromomethyl acrylate with triethyl phosphite followed by the selective hydrolysis of the phosphonate or t‐butyl ester groups with trimethylsilyl bromide and trifluoroacetic acid. The copolymerization of these monomers with 2‐hydroxyethylmethacrylate was investigated with photodifferential scanning calorimetry at 40 °C with 2,2′‐dimethoxy‐2‐phenyl acetophenone as a photoinitiator. Quantum mechanical tools were also used to understand the mechanistic behavior of the polymerization reactions of these synthesized monomers. The propagation and chain‐transfer reactions were considered and rationalized. A strong effect of the monomer structure on the rate of polymerization was observed. The polymerization reactivities of the monomers increased with decreasing steric hindrance and/or increasing hydrogen‐bonding capacity because of the hydrolysis of the phosphonate and the t‐butyl ester groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2574–2583, 2005     

Synthesis and photopolymerization of new dental monomers from o‐hydroxyaryl phosphonates

Novel aromatic mono‐ and diphosphonate monomers based on t‐butyl α‐bromomethacrylate were prepared for use in dental composites. The synthesis of the two monomers involved three steps: the reaction of diethyl phosphite with phenol or hydroquinone, the rearrangement of the resulting phosphate derivatives into o‐hydroxyaryl phosphonates with lithium diisopropylamide, and the reaction of o‐hydroxyaryl phosphonates with t‐butyl α‐bromomethacrylate. Then, the selective hydrolysis of the t‐butyl ester groups of the monomers with trifluoroacetic acid gave the other carboxylic acid containing monomers. The photopolymerization behaviors of the synthesized monomers with glycerol dimethacrylate and triethylene glycol dimethacrylate were investigated with photodifferential scanning calorimetry at 40 °C with 2,2′‐dimethoxy‐2‐phenyl acetophenone as the photoinitiator. The hydrolysis of the t‐butyl groups of the monomers increased the reactivity and the rates of polymerization of the monomers. The mixtures of the acid monomers showed rates of polymerizations similar to those of homopolymerizations of triethylene glycol dimethacrylate and glycerol dimethacrylate. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6775–6781, 2006     

Synthesis and radical polymerization of hydrolytically stable dentin bonding agents

Acrylic groups containing phosphonic acids were synthesized by ether formation of ethyl α‐chloromethylacrylate with hydroxyalkyl phosphonates and subsequent hydrolysis to the corresponding phosphonic acid α‐methylsubstituted acrylates. Furthermore, phosphonic acids derived from acrylonitrile and acrylamide were synthesized. The monomers are hydrolytically stable in aqueous ethanol. The radical polymerization of the monofunctional phosphonic acids results in water soluble polymers, whereas in case of a phosphonic acid diacrylate a cross‐linked polymer was formed. The most radical polymerizable phosphonic acids can be used to promote the adhesion to dentin.     

Synthesis,photopolymerization and adhesive properties of new hydrolytically stable phosphonic acids for dental applications

Novel monomers 2‐(N‐methylacrylamido)ethylphosphonic acid, 6‐(N‐methylacrylamido)hexylphosphonic acid, 10‐(N‐methylacrylamido)decylphosphonic acid, and 4‐(N‐methylacrylamidomethyl)benzylphosphonic acid have been prepared in good yields for use in dental adhesives. They have been fully characterized by ¹H‐NMR, ¹³C‐NMR, ³¹P ‐ NMR, and by HRMS. All monomers are hydrolytically stable in aqueous solution. Free radical homopolymerizations of these monomers have been carried out in solution of ethanol/water (2.5/1:v/v), using 2,2′‐azo(2‐methylpropionamidine) dihydrochloride (AMPAHC) as initiator. They lead to homopolymers in moderate to excellent yields. Structure of the polymers has been confirmed by SEC/MALLS and ¹H‐NMR spectra. The photopolymerization behavior of the synthesized monomers with N,N′‐diethyl‐1,3‐bis(acrylamido)propane has been investigated by DSC. New self‐etch primers, based on these acrylamide monomers, have been formulated. Dentin shear bond strength measurements have shown that primers based on (N‐methylacrylamido)alkylphosphonic acids assure a strong bond between the tooth substance and a dental composite. Moreover, the monomer with the longest spacer group provides the highest shear bond strength. © Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7074–7090, 2008     

Synthesis,photopolymerization, and adhesive properties of new bisphosphonic acid monomers for dental application

Four new monomers, 3‐(N‐methylacrylamido)propylidenebisphosphonic acid, 3‐(N‐propyl‐acrylamido)propylidenebisphosphonic acid, 3‐(N‐hexylacrylamido)propylidenebisphosphonic acid, and 3‐(N‐octylacrylamido)propylidenebisphosphonic acid, have been synthesized in good yields and fully characterized by ¹H, ¹³C, ³¹P NMR, and HRMS. The copolymerization of these monomers with N,N′‐diethyl‐1,3‐bis(acrylamido)propane (DEBAAP) has been investigated with differential scanning calorimetry. These mixtures show a higher reactivity than DEBAAP. New self‐etch dental primers, based on these acrylamide monomers, have been formulated. Dentin shear bond strength measurements have shown that primers based on these bisphosphonic acids assure a strong bond between the tooth substance and a dental composite. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5258–5271, 2009     

Urea dimethacrylates functionalized with bisphosphonate/bisphosphonic acid for improved dental materials

Incorporation of bisphosphonate/bisphosphonic acid groups in dental monomer structures should increase interaction of these monomers with dental tissue as these groups have strong affinity for hydroxyapatite. Therefore, new urea dimethacrylates functionalized with bisphosphonate (1a, 1b) and bisphosphonic acid (2a, 2b) groups are synthesized and evaluated for dental applications. Monomers 1a and 1b are synthesized from 2‐isocyanatoethyl methacrylate (IEM) and two bisphosphonated amines (BPA1 and BPA2), prepared as reported elsewhere. Selective dealkylation of the bisphosphonate ester groups of 1a and 1b using trimethylsilyl bromide (TMSBr) gives monomers (2a and 2b) with bisphosphonic acid functionality. X‐ray diffractometer (XRD), Raman spectroscopy, and X‐ray photoelectron spectroscopy (XPS) analyses of monomer‐treated HAP particles show that 2a induces formation of stable monomer‐calcium salts, similar to 10‐methacryloyloxydecyl dihydrogen phosphate (MDP), with higher chemical interaction than 2b. The photopolymerization studies indicate good copolymerizability with commercial dental monomers. In vitro studies on NIH 3T3 mouse embryonic fibroblast cells have clearly shown that the tested monomers (1b and 2b) are not toxic according to the MTT standards. All these properties make these monomers suitable as biocompatible cross‐linkers/adhesives for dental applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3195–3204     

Synthesis and polymerizations of six aminophosphonate‐containing methacrylates

Two different groups of novel aminophosphonate‐containing methacrylates were synthesized. The route to the first group involves reactions of ethyl α‐bromomethacryate (EBBr) and t‐butyl α‐bromomethacryate (TBBr) with diethyl aminomethylphosphonate and diethyl 2‐aminoethylphosphonate. Bulk and solution polymerizations at 60–80 °C with 2,2′‐azobis(isobutyronitrile) (AIBN) gave crosslinked or soluble polymers depending on monomer structure and polymerization conditions. Increasing bulkiness from ethyl to t‐butyl decreases the polymerization rate, correlated well with the chemical shift differences of double bond carbons and consistent with the lower molecular weights of t‐butyl ester polymers (M_n = 1800–7900 vs. 50,000–72,000). The route to the second group involves the Michael addition reaction between diethyl aminomethylphosphonate and diethyl 2‐aminoethylphosphonate with 3‐(acryloyloxy)‐2‐hydroxypropyl methacrylate (AHM) to give secondary amines. The photopolymerization using differential scanning calorimeter showed that these monomers have similar or higher reactivities than AHM, even though AHM has two double bonds. The high rates of polymerization of these monomers were attributed to both hydrogen bonding interactions due to additional NH groups as well as chain transfer reactions. All the homopolymers obtained produced char (17–35%) on combustion. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Monomers for adhesive polymers. XV. Synthesis,photopolymerization, and adhesive properties of polymerizable β‐ketophosphonic acids

The novel polymerizable β‐ketophosphonic acids 4 , 8 , 10 , and 16 as well as the 9‐(methacryloyloxy)‐nonylphosphonic acid 20 were synthesized in four to eight steps. They were characterized by ¹H NMR, ¹³C NMR, and ³¹P NMR spectroscopy and by high‐resolution mass spectra. The free‐radical polymerization of 4 , 8 , 10 , and 16 was carried out in a water/ethanol solution, using 2,2′‐azo(2‐methylpropionamidine)dihydrochloride as initiator. To evaluate the reactivity of the acidic monomers 4 , 8 , 10 , 16 , and 20 , their photopolymerization behavior was investigated by photodifferential scanning calorimeter. Copolymerizations with 2‐hydroxyethyl methacrylate, glycol dimethacrylate, and N,N′‐diethyl‐1,3‐bis‐(acrylamido)propane were studied. The homopolymerization of the corresponding β‐ketophosphonates and their copolymerization with hydroxyethyl methacrylate were also carried out. Self‐etch adhesives based on the β‐ketophosphonic acids 4 , 8 , 10 , and 16 were able to provide high shear bond strengths (SBSs) of dimethacrylate‐based composite to dentin and enamel. The β‐ketophosphonic acid 8 was also shown to exhibit significantly better adhesive properties than the corresponding phosphonic acid 20 . Indeed, the presence of the carbonyl moiety in the β‐position of the phosphonic acid group led to a strong improvement of the composite SBS to dentin and enamel. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3550–3563     

Synthesis and photopolymerizations of new phosphonated monomers for dental applications

Three novel phosphonated methacrylate monomers have been synthesized and studied for use in dental applications. Two of the monomers were synthesized from the reactions of glycidyl methacrylate (GMA) with (diethoxy‐phosphoryl)‐acetic acid (monomer 1 ) and (2‐hydroxy‐ethyl)‐phosphonic acid dimethyl ester (monomer 2 ). These monomers showed high crosslinking tendencies during thermal bulk and solution polymerizations. The third monomer (monomer 3 ) was prepared by the reaction of bisphenol A diglycidylether (DER) with (diethoxy‐phosphoryl)‐acetic acid and subsequent conversion of the resulting diol to the methacrylate with methacryloyl chloride. The homopolymerization and copolymerization behaviors of the synthesized monomers were also investigated with glycerol dimethacrylate (GDMA), triethylene glycol dimethacrylate (TEGDMA), and 2,2‐bis[4‐(2‐hydroxy‐3‐methacryloyloxy propyloxy) phenyl] propane (bis‐GMA) using photodifferential scanning calorimetry at 40 °C using 2,2′‐dimethoxy‐2‐phenyl acetophenone (DMPA) as photoinitiator. Monomer 1 showed polymerization rate similar or greater than dimethacrylates studied here but with higher conversion. The maximum rate of polymerizations decreased in the following order: 1 ～TEGDMA>GDMA～bis‐GMA～ 3 > 2 . A synergistic effect in the rate of polymerization was observed during copolymerizations. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2290–2299, 2008     

Hydrogenation/Regioselective C‐Acylation Reaction of Diethyl Coumarin‐3‐phosphonate With NaBH4/Acid Anhydrides: A New One‐Pot Tandem Reaction

The one‐pot tandem reaction of diethyl coumarin‐3‐phosphonate 1 with a mixture of sodium borohydride/acid anhydrides gives mainly the corresponding hydrogenation/acylation product of diethyl 3‐acyl‐2‐oxochroman‐3‐ylphosphonates 3a–d in good yields. Different experimental conditions have been examined to get the best yields of the reaction products. From this reaction the hydrogenation product of diethyl 2‐oxochroman‐3‐ylphosphonate, 2, as well as the products of the consecutive hydrogenation, diethyl 2‐hydroxychroman‐3‐ylphosphonate (4) and diethyl 3‐[2‐hydroxyphenyl]‐1‐hydroxy‐propan‐2‐ylphosphonate (5), have been isolated.     

New polymer‐chemical developments in clinical dental polymer materials: Enamel–dentin adhesives and restorative composites

In the past 10 years, many new components were synthesized and evaluated for an application in enamel–dentin adhesives and direct composite restoratives. New bisacrylamide cross‐linkers with improved hydrolytic stability and new strongly acidic polymerizable phosphonic acids and dihydrogen phosphates, as well as novel photoinitator systems, in combination with the implementation of novel application devices, have significantly improved the performance of the current enamel–dentin adhesives. The currently used resins for direct composite restoratives are mainly based on methacrylate chemistry to this day. A continuous improvement of the properties of current composites was achieved with the use of new tailor‐made methacrylate cross‐linkers, new additives, and photoinitiators as well as tailor‐made fillers. Nowadays, dental adhesives and methacrylate‐based direct restorative materials have found wide‐spread acceptance. Nevertheless, future developments in the field of dental adhesives and direct composite restoratives will focus on improving durability and biocompatibility as well as the development of materials with a broader application spectrum and of smart adhesives or composites. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012