倾斜式生长ZnS纳米柱状薄膜及其透射性能的研究

采用倾斜式生长的方法,在本底真空为3×10-4 Pa,生长率为0.2 nm·s-1的条件下,通过改变衬底的法线方向与入射粒子流的夹角α,在ITO导电玻璃衬底上制备了ZnS纳米薄膜。在α=80°和85°时,样品的Ｘ射线衍射谱证实了不同倾斜角时所制备薄膜中均有纳米ZnS晶体形成,扫描电子显微镜(SEM)图像显示,所形成的薄膜均呈现出了柱状结构,并且倾斜角为85°时所得到的纳米柱直径大于80°时所得结果;在α=0°时,相应测量结果表明,虽然在不同衬底上也形成了纳米ZnS晶体薄膜,但并未见柱状结构,而是形成了一层均匀且致密的薄膜。对两种薄膜结构的生长动力学过程作了分析。ITO衬底上薄膜的透射光谱表明ZnS柱状薄膜能够提高可见光的透过率,因此对柱状ZnS纳米薄膜的研究将有利于提高电致发光器件的发光效率。     

Gradient-Field Sorting of Microparticles

The method of spatial sorting of different types of microparticles in a liquid with the aid of a gradient laser field has been proposed and implemented. The method is based on linear scanning of the interference fringes of the field imposed on a suspension. It is shown theoretically that at given parameters of the particles and field it is possible to select such a rate of scanning of interference fringes at which only the particles of one species will be captured and carried in the wake of the field, while others are left in place. The efficiency of the proposed method of selection of particles is confirmed experimentally with an example of a water suspension of polymeric small balls of diameter 5.8 and 10 m illuminated by interference fringes of He–Ne laser radiation ( = 632.8 nm). The implemented method of control of microparticles can find application in physics, biology, medicine, microtechnology, and also in a number of other fields.     

Achieving Thin Films with Micro/Nano-Scale Controllable Morphology by Glancing Angle Deposition Technique

We demonstrate that thin films with micro/nanometre controllable morphology can be fabricated by the glancing angle deposition （GLAD） technique which is a physical vapour deposition technique. In this technique, there are parameters which determine the morphology of the thin films： the incident angle, ratio of the deposition rate with respect to the substrate rotation rate, nature of the material being deposited, etc. We fabricate the morphology of column, pillar, helices, zigzag and study the parameters which determine morphology by given some examples of SEM.     

Graded Index 532HR/1064HT Filter by Glancing Angle Deposition

Glancing angle deposition is a novel method to prepare graded index coatings. By using this method and physical vapour deposition, ZrO2 is used to engineer graded index filter on BK7 glass substrate. Controlling the deposition rate and the periodic oscillation of oblique angle of deposited material, a 10-period graded index ZrO2 filter with high reflection near 532nm and high transmittance at wavelength 1064nm is fabricated. The causes of difference between the theoretical and experimental results are discussed in detail. The material properties and electron gun nonlinearity are possibly the main origins of the difference, which result in the variations in both thickness control and deposition rate of the film material.     

Growth characteristics of inclined columns produced by Glancing Angle Deposition (GLAD) and colloidal lithography

Nanocolumns were produced by performing Glancing Angle Deposition (GLAD) onto self-assembled template arrays consisting of platinum coated polystyrene spheres. By varying the angle of incidence (θ = 35°, 10° and 5°) and the deposited surface mass density it was possible to control the shape of the individual columns. The changes in column shape as function of the amount of mass deposited on the respective surfaces were characterized by monitoring the increase in the length and width of the structures. Interestingly the column shape development followed a power law behaviour. The power law exponents retrieved from the length and width increment as function of the deposited surface mass density decreased from 1.06 to 0.46 and 0.71 to 0.09, respectively, as θ changed from 35° to 5°. The changes in the power law exponents indicate that the growth of the nano-columns is influenced by both surface diffusion and shadowing effects. A detailed understanding of the underlying processes governing the nanocolumn growth might be utilized in the design of new functional nanomaterials.     

在硅片上沉积厚二氧化硅的火焰水解法研究

用火焰水解和高温烧结的方法在单晶硅基片上制备了厚SiO2和B2O2-P2O2-SiO2光波导包层材料。并用扫描电镜(SEM)和X射线粉末衍射(XRD)方法对其微观形貌和物相结构进行了观察和检测。重点对硅基片上沉积厚SiO2时的龟裂和析晶问题进行了深入研究。从扫描电镜照片可以看出．火焰水解法形成的SiO2粉末呈多孔的蜂窝状结构。这种粉末具有很高的比表面积,因而很容易烧结成玻璃。X射线衍射图谱表明．这种粉末是完全非晶态的。经过烧结以后,从扫描电镜照片可以明显看出硅基片上的SiO2薄膜出现龟裂。同时,X射线衍射测试结果表明有少量SiO2析晶。而通过在SiO2中掺入B2O3、P2O5,上述龟裂和析晶完全消失。用这种工艺制备的SiO2波导包层材料厚度达到20μm以上,表面光滑、没有龟裂,而且是完全玻璃态的,可以用于制备性能优良的各种硅基二氧化硅波导器件。     

Dynamics of the Trapping of Microparticles by an Interference Field on Exposure to Continuous and Pulsed Radiation

The dynamics of motion of microparticles in a gradient light field depending on the acting radiation time sequences has been studied theoretically and experimentally. A water suspension of small polymeric balls illuminated by interference fringes of the radiation from a cw He–Ne laser ( = 632.8 nm) and also pulse-periodic YAG:Nd³⁺ laser ( = 532.1 nm; _p 17 nsec; f 50 Hz) was used. It has been established that the gradient field generated by continuous radiation ensures a higher velocity for transporting particles and, consequently, a more effective change in their local concentration and acceleration of their diffusion. In contrast to this, interference irradiation of particles by short repetitive pulses is not very effective for their transportation in space but ensures much higher instantaneous velocities and a higher kinetic energy. As applied to biological objects, this regime has a slight effect on the local concentration and diffusion of particles, but can cause conformational changes in biological structures.     

Magnetic Composite Lignin Colloids Prepared with a Convenient Patching Method for Generally Treating Heterogeneous Oily Wastewater

The key to the efficient use of biomass resources is the rational design and preparation of lignin-based fine chemicals. In this investigation, the colloidal self-assembly structure formed by lignin in good solvents is used as the module, magnetic Fe₃O₄ nanoparticles are taken as the carrier, and magnetic composite lignin nanoparticles are prepared in batches by a rapid and convenient surficial grafting (patching) process. The varying amphiphilicity and wettability of lignin are influenced by the various types of wetting solvents. Its wetting behavior can be regulated to achieve oil–water separation in different adsorption or/and emulsification processes. This study provides a novel tool for industrial oil–water separation and, thus, general oily wastewater treatment.     

相位连续可调诱导下双艾里光束形成的可控方形光瓶(英文)

提出一种利用相位连续可调诱导产生的双艾里光束形成方形光瓶的方法。该方法首先利用二值化后的相位调制出双艾里光束,为了能够实现光瓶能量分布,一个可调控的线性因子被引入到相位调制函数中形成新改进的相位,该相位能够灵活地调节光瓶的大小。数值模拟结果表明高斯光束通过该改进相位调制,能够形成光瓶能量分布的光束。该方形光瓶光束可应用于光镊、原子捕获与操纵。     

高数值孔径聚焦三维光链的研究

通过设计衍射光学元件对入射矢量光进行调制，在高数值孔径聚焦系统焦点附近产生沿光轴方向的三维多点光俘获结构——光链.并针对不同的入射矢量偏振、聚焦透镜的数值孔径以及衍射光学元件结构，对光链性能的影响分别进行了系统的分析，实现对该独特光俘获结构的可控性研究. 关键词： 衍射光学元件 矢量光 光镊     

相位连续可调诱导下双艾里光束形成的可控方形光瓶

提出一种利用相位连续可调诱导产生的双艾里光束形成方形光瓶的方法。该方法首先利用二值化后的相位调制出双艾里光束,为了能够实现光瓶能量分布,一个可调控的线性因子被引入到相位调制函数中形成新改进的相位,该相位能够灵活地调节光瓶的大小。数值模拟结果表明高斯光束通过该改进相位调制,能够形成光瓶能量分布的光束。该方形光瓶光束可应用于光镊、原子捕获与操纵。     

光学微操纵过程的轴平面显微成像技术

光学俘获技术利用光与物质相互作用产生的光势阱效应来实现对微粒的操控,已经成功应用于生物医学、材料科学等交叉领域.在对微粒进行三维俘获时,传统的宽场光学显微技术只能观测到某一平面内微粒的横向运动,对微粒沿轴向运动的观测受到很大限制.本文将轴平面显微成像技术引入光学微粒操控研究中,利用45?倾斜的反射镜把微粒的轴向运动信息转换到横向平面进行观测,与传统宽场显微成像技术相结合,实现了对二氧化硅小球俘获过程横向和轴向运动的同步观测.该成像方法无需扫描和数据重构,具有实时快速等优点,在新型光束光镊、厚样品三维观测和成像等领域具有潜在的应用价值.     

含稀土光学树脂的制备和性能研究

稀土高分子材料是通过稀土金属与高分子的复合而制备的一类兼具稀土光、电、磁等特性和高分子质轻、抗冲击和易加工等优良综合性能的功能材料。稀土高分子材料主要分为两大类型:一类是稀土化合物作为掺杂剂均匀分散到高分子的单体和聚合物中;第二类是稀土化合物以单体形式参与聚合或缩合以及稀土化合物配位在聚合物的侧链上获得的键合型稀土高分子材料。本文综述了国内外在稀土金属与高分子复合材料方面的研究进展及相关应用,介绍了本组在合成含稀土化合物和配合物光学树脂方面的研究情况,通过把稀土配合物复合到苯乙烯和甲基丙烯酸共聚体系中,获得了发光强度高、荧光寿命长、透光率高、机械性能好的光学树脂,并对今后工作方向进行了展望。     

CdS掺Mg和Ni电子结构和光学性质的密度泛函理论研究

采用基于密度泛函理论的第一性原理赝势平面波方法,对闪锌矿结构CdS和CdS∶M(M=Mg,Ni)几何结构、能带结构、电子态密度和光学性质进行了系统的研究。几何结构研究对掺杂后体系晶格常量进行了优化计算,结果表明Mg和Ni原子掺入CdS后晶格常量均减小,晶格发生局部畸变。进一步研究了掺杂对体系电子结构的影响,能带结构和电子态密度分析表明由于Ni 3d电子的引入使CdS∶Ni成为半金属铁磁半导体,而Mg 3s电子的引入CdS∶Mg带隙变宽。另外,体系掺杂后,吸收系数分析表明掺杂导致吸收峰在可见光波长区域变化显著,且掺Ni导致吸收峰进一步向长波方向移动。     

Controlled growth behavior of chemical vapor deposited Ni nanostructures

Isolation of four distinct nanostructured Ni products is demonstrated in a well-controlled chemical vapor deposition process. These nanostructures include core–shell Ni–NiO nanowires, horizontally oriented nanowires, vertically oriented nanowires, and fully isometric cubic crystals all obtained upon an amorphous SiO₂|Si growth substrate from an identical metal halide precursor. Transmission electron microscopy indicates the horizontally- and vertically-oriented nanowire products to be high-quality single crystals with a preferred growth axis along the ?001? direction while the Ni–NiO core–shell nanowires are polycrystalline metal at the center and surrounded by an outer oxide. The differing crystal structures are reflected in the magnetic response of each nanowire type, as evidenced by magnetoresistance measurements. Detailed discussion of the formation mechanisms leading to each of the four nanostructured Ni products is presented along with a discussion of the general applicability of this non-epitaxial growth process to other material systems.     

Optical and magnetic properties of porous anodic alumina films embedded with Co nanowires

A simple method to tune the optical properties of porous anodic alumina （PAA） films embedded with Co nanowires （PAA@Co nanocomposite films） is reported in this paper. The films exhibit vivid structural colors and magnetic properties. The optical properties of the films can be effectively tuned by adjusting the thickness of the PAA template. The deposition of Co nanowires greatly increases the color saturation of the PAA films. The theoretical results of the changes in structural color according to the Bragg-Snell formula are consistent with the experimental results. PAA@Co films can be used in many areas, including decoration, display, and multifunctional anti-counterfeiting applications.     

角度测量的光学方法

光学测角法是高精度动态角度测量的一种有效的解决途径。对目前发展较快的几种角度测量的光学方法———圆光栅测角法、光学内反射小角度测量法、激光干涉测角法和环形激光测角法进行了详细的介绍 ,并且分别给出了每种方法的测量原理和发展现状 ,比较了各种方法的优缺点 ,给出了每种方法的应用场合和发展前景     

基于第一性原理的新型非线性光学晶体探索

非线性光学晶体能对常见波段的激光进行频率转换,从而获得宽波段、可调谐的激光光源.此类光电功能材料在军事和民用领域具有重要的战略价值和应用价值.经过30多年的发展,应用于可见光及邻近波段的非线性光学晶体技术已经基本成熟,但深紫外和中远红外波段的非线性光学晶体技术的发展仍存在诸多不足,还需要在这些波段进行新型优质的非线性光学晶体探索.近年来,为了改变传统低效的"炒菜式"实验探索,加快新材料研发速度,基于密度泛函理论的第一性原理计算方法在新型非线性光学晶体探索中得到了广泛的应用.本文总结了近几年深紫外和中红外波段非线性光学晶体的新进展,通过介绍几种新型非线性光学晶体材料的研发过程,突出了第一性原理计算在新材料探索过程中起到的关键作用;探讨了非线性光学晶体研发的研究难点与趋势,以及第一性原理方法在未来新材料探索中的重点攻关方向.     

分层复合材料光波导的非线性二次增强效应

通过对分层复合材料光波导ＴＭ模等效介电系数的分析，清楚地预言了无限扩展分层复合材料结构中的非线性增强将因光波导的边界作用而引起进一步的加强。