Micro‐Raman investigation of transition‐metal‐doped ZnO nanoparticles

We measured the Raman spectra of ZnO nanoparticles (ZnO‐NPs), as well as transition‐metal‐doped (5% Mn(II), Fe(II) or Co(II)) ZnO nanoparticles, with an average size of 9 nm. A typical Raman peak at 436 cm⁻¹ is observed in the ZnO‐NPs, whereas Zn_1−xMn_xO, Zn_1−xFe_xO and Zn_1−xCo_xO presented characteristic peaks at 661, 665 and 675 cm⁻¹, respectively. These peaks can be related to the formation of Mn₃O₄, Fe₃O₄ and Co₃O₄ species in the doped ZnO‐NPs. Moreover, these samples were analyzed at various laser powers. Here, we observed new vibrational modes (512, 571 and 528 cm⁻¹), which are specific to Mn, Fe and Co dopants, respectively, and ZnO‐NPs did not reveal any additional modes. The new peaks were interpreted either as disorder activated phonon modes or as local vibrations of Mn‐, Fe‐ and Co‐related complexes in ZnO. Copyright © 2007 John Wiley & Sons, Ltd.     

Coexistence of superconductivity and magnetic order in YBa2Cu4O8

⁵⁷Fe Mössbauer spectroscopy, magnetic susceptibility and powder x-ray-diffraction measurements were used to study superconductivity and magnetic order in YBa₂(Cu_1?xFe_x)₄O_8+δ. T_c is decreasing with x, disappearing for x>x_c≈0.04. For xc iron substitutes Cu, predominantly in the Cu(1) site exhibiting a single quadrupole Mössbauer spectrum at 90 K. For x>x_c magnetic order is observed in the Cu(2) site, T_N=380 (5) K for x=0.1 and H_eff (Cu(2), 4.2 K)=510(2) kOe. However, the most surprising discovery is that for x=0.025, for which T_c=27(2) K, the Fe in the Cu(1) site orders magnetically at T_N=30(2) K and H_eff (Cu(1), 4.2 K)=461(2) kOe. The coexistence and competition between superconductivity and magnetic order in the Cu(1) and Cu(2) sites in YBa₂Cu₄O₈ are discussed in terms of the previously observed phase diagrams for Y_1?xPr_xBa₂(Cu_1?yFe_y)₃O_z.     

Mössbauer study of YBa2(Cu1−x Fex)3Oy from an aspect of distribution of Fe

Fe Mössbauer spectra have been measured systematically in YBa₂(Cu_1–x Fe_x)₃O_y prepared by two different heat treatments: the usual treatment (O) and the heat treatment including that under lower oxygen fugacity at high temperatures followed by the oxidation process at low temperatures (NO). From the analysis of the results in terms of binomial random probability, it has been found that the Fe distribution in the Cu(1) site is almost random in the heat treatment (O). Here, the D1 and D2 components in the Mössbauer spectra, which have been assigned to the 4 and 6 oxygen coordinated Fe ions in the Cu(1) site respectively, should correspond to the monomer and cluster Fe ions. In the heat treatment (NO), some of the Fe ions are transferred to the Cu(2) site and there exist only cluster Fe ions in the Cu(1) site, resulting in the characteristic change of macroscopic properties of this system.     

EPR study on the La2/3Ca1/3Mn1−x Cu x O y system

The interaction between Mn and Cu ions is studied by measuring the resistance and electron paramagnetic resonance (EPR) at different temperatures of the Cu-doped compound La_2/3Ca_1/3Mn_1−xCu_xO_y. A new transition inR-T curve and substantial enhancement in magnetoresistance are induced by the substitution of Mn ions by Cu ions. The EPR measurement shows that two resonance signals appear at temperature lower than the spin-ordering temperature of Mn ions. A tentative interpretation for the observed phenomena is proposed by considering the interaction between the Cu/Mn ions besides the Mn³⁺/Mn⁴⁺ ions.     

CNDO studies of Y-Ba-Cu-O superconductors IV. The oxygen content effect

The dependence of the electronic structure of superconducting YBa₂Cu₃O _y , is investigated using a quasi-relativistic CNDO/1 molecular orbital method. Electronic structures of model clusters [Ba₈Cu₃O _n ] ^q with total chargesq=23–2n forn=11 to 14 in various Cu(1) coordination geometries are compared. The increasing oxygen content causes the electron density transfer from the central Cu(1)O(1,5) _x area to the lateral Cu(2)O(3,4)₂ sheets. The isomerization effects are important for the structures withn=12.     

The behavior of thermopower in the YBa2−x LaxCu3Oy system. Correlation between the band parameters in normal state and critical temperature

The thermopower in the YBa_2−x La_xCu₃O_y system (x=0–0.5) has been studied. An analysis made in terms of the narrow-band model revealed trends in the variation of the main band parameters with increasing lanthanum concentration. The dependence of the conduction band width on lanthanum concentration was found to pass through a weak minimum at x=0.05–0.1, which correlates in position with the maximum in the concentration dependences of the critical temperature and degree of sample orthorhombicity. The results obtained and their comparison with Fe, Co→Cu substitution data permit a conclusion that the main factor affecting the properties of the YBa₂Cu₃O_y system under nonisovalent substitution of various cations is the increasing disorder in the chain-oxygen subsystem caused by increasing impurity content. Fiz. Tverd. Tela (St. Petersburg) 40, 17–22 (January 1998)     

Synthesis and conductivities of the apatite-type systems, La9.33+xSi6−yMyO26+z (M=Co, Fe, Mn) and La8Mn2Si6O26

Apatite-type oxides of formula (La/Sr)_10−xSi₆O_26+y have been attracting significant interest recently, because of their high oxide ion conductivity. In this paper we report the synthesis and conductivities of phases based on doping La_9.33Si₆O₂₆ with Co, Fe, Mn on the Si site, according to the formula La_9.33+x/3Si_6−xM_xO₂₆ (M=Co, Fe, Mn). Substitution limits observed were x≤1.5 (Co), x≤1.25 (Fe), x≤0.5 (Mn). Higher Mn levels could be achieved by substituting onto the La site, with it being possible to prepare the phase La₈Mn₂Si₆O₂₆. The highest conductivities were observed for the Co doped samples, although investigations into the dependence of conductivity on p(O₂) (0.2–10⁻⁵ atm.) indicated that the conductivity was dominated by the electronic component in these cases. In contrast, the conductivities for the Fe and Mn doped samples were mainly ionic in the same p(O₂) range. Experiments into varying the oxygen content of these doped phases indicated that increasing the oxygen content above the nominally stoichiometric O₂₆ appears to increase the oxide ion conductivity. Preliminary studies of the reactivity of the electrolyte La_9.33Si₆O₂₆ with potential SOFC cathode materials (La_1−xSr_xMO₃; M=Co, Fe, Mn) suggests that reaction can occur at high temperatures leading to the incorporation of the transition metal into the apatite electrolyte. However, the fact that these doped phases exhibit high conductivities suggests that this may limit any problems caused by such a reaction at the electrolyte-electrode interface. Paper presented at the 8th EuroConference on Ionics, Carvoeiro, Algarve, Portugal, Sept. 16–22, 2001.     

Comparison of O–H and C–H activation of methanol on Ni-based cluster: a DFT investigation

Using the density functional theory, the initial dehydrogenation of methanol on Ni_xM_y (M?=?Ni, Co, Fe, Mn, Cr, x?+?y?=?4, y?=?1, 2) clusters is investigated. Two adsorption and dehydrogenation mechanisms of methanol are studied: one proceeds along the C–H scission and another begins with the breaking of the O-H bond. The adsorption sites of methanol on the Ni or M sites of the Ni_xM_y clusters are considered. The adsorption of methanol on Ni₄ cluster is stronger than those on bimetallic clusters, while the initial dehydrogenation barriers on Ni_xM_y clusters are lower than that on Ni₄ cluster. The comparable energy barriers of two pathways (O–H or C–H dissociation) on Ni-based clusters indicate that these two paths are quite competitive. In addition, the Ni₂M₂ clusters show superior activation performance compared with the Ni₃M clusters, especially for Ni₂Mn₂ and Ni₂Cr₂ clusters. The effects of alloyed metal on the catalytic activity of Ni for methanol initial dehydrogenation, including the adsorption energy, O–H or C–H bond scission barrier and frontier molecular orbital levels, are discussed. It can be concluded that the addition of Co, Fe, Mn and Cr to Ni catalyst is able to enhance the activity of the methanol dehydrogenation reaction.     

Mössbauer study of tin-doped 1-2-3 and 2-1-4 highT c superconductors

Samples of YBa₂(Cu_0.85Sn_0.15)₃O_7–y (1-2-3), La₂(Cu_0.95Sn_0.05)O4_4–x, and La_1.85Ba_0.15(Cu_0.95Sn_0.05)O_4–x (2-1-4), with different oxygen stoichiometry, have been studied by Mössbauer spectroscopy. These measurements reveal the existence of two inequivalent sites for Sn in the (1-2-3) compounds. The (1-2-3) spectra display two quadrupole doublets which we associate with Sn in Cu(1) and Cu(2) sites, respectively. La compounds show a single quadrupole doublet.     

YBa2(Cu0.95M0.05)3O7-δ的代换效应及其中子衍射研究

X射线衍射实验表明YBa₂(Cu_0.95M_0.05)₃O_7-δ(M=Ti,V,Cr,Mn,Fe,Co,Ni,Cu和Zn)均为单相结构。Fe,Co,Ni和Zn对Cu的替代使超导临界温度T_c显著下降,而同样含量的Ti,V,Cr,Mn对Cu的替代并未对超导性能产生显著影响。并利用中子衍射分析了Ti,Mn,Fe和Co对Cu原子的取代,发现代换原子对Cu的两个晶位各自存在不同的择优占据 关键词：     

KKR-CPA-LDA计算方法对CuMnAl和CoMnAl以及CuCoMnAl合金的磁性研究

采用KKR-CPA-LDA方法研究了CuMnAl,CoMnAl和CuCoMnAl四元合金中磁性原子磁矩和Co-Mn间的交换作用.通过与实验结果对比,揭示了Mn的磁矩和Co的磁矩以及它们的相互作用随成分变化的规律.研究发现,在Cu₅₀Mn_25+xAl25-x合金中超过化学配比并占据Al位的Mn原子是反铁磁的,而且由于近邻环境的不同,其磁矩大于原有Mn原子的磁矩.在Co₅₀Mn_{25+< 关键词： KKR-CPA-LDA计算 Co-Mn间交换作用}     

Magnetic ordering of Fe atoms in YBa2(Cu1−x Fe x )3O3 in superand semiconducting states

Magnetic behavior of Fe atoms in YBa₂(Cu_1−x Fe _x )₃O _y system in superconducting (SC) and non-SC states is studied. In SC region one magnetic ordering point T_m1 is observed for all Fe atoms in Cu1 sites: T_m1=10 K and 16 K for x=0.05 and x=0.10, respectively. In the non-SC state for x=0.05 Cu1 and Cu2 sublattices are magnetically independent and two magnetic ordering points are found: T_m1=20 K and T_m2=405K. For x=0.10 a strong magnetic interaction between Cu1 and Cu2 sublattices appears and only one ordering point T_m2=435 K is observed.     

Synthesis,Mössbauer studies and superconductivity of substituted Bi 2201 phase

We report X-ray diffraction, resistivity and Mössbauer studies on several substituted 2201 Bi cuprates, Bi₂Sr₂Cu_1?xFe_xO_y(O≤x≤1) and Bi₂Sr_1.6La_0.4Cu_1?xFe_xO_y and Bi_1.6Pb_0.4Sr_1.6La_0.4Cu_1?xFe_xO_y (O≤x≤0.04). The first series is not superconducting and a new phase appears for x=1. For La substituted samples, T_c increases up to 35K and decreases strongly with x. All Mössbauer spectra were fitted well with four quadrupole doublets, with relative population depending on samples.     

DFT studies on the interaction of PtxRuyMz (M = Fe,Ni, Cu,Mo, Sn,x + y + z = 4, x ≥ 1, y ≥ 1) alloy clusters with O2

The reaction mechanism of O₂ dissociation on Pt_xRu_yM_z (M = Fe, Ni, Cu, Mo, Sn, x + y + z = 4, x ≥ 1, y ≥ 1) alloy catalysts have been investigated with density functional theory calculations in this work. For bare alloy clusters, bimetallic clusters are more stable than the ternary alloy clusters. The geometries of the Pt_xRu_yM_z–O₂ system, O–O bond stretching frequency and electronic-structure details have been investigated. The energies of O₂ adsorption on PtRu clusters are slightly higher than those on Pt_xRu_yM_z clusters, and the more charge transfer to O₂ from the metal cluster, the higher O₂ the adsorption energy obtains. The reaction barriers show that the catalytic performance of trimetallic clusters are better than those of bimetallic clusters, and Pt₂RuM clusters exhibit superior catalytic activity for O₂ dissociation. The different performance of these alloy clusters for O₂ dissociation is scrutinised with aid of molecular orbital and natural bond orbital population analysis.     

Synthesis and characterization of mesoporous and hollow-mesoporous M<Subscript>x</Subscript>Fe<Subscript>3-x</Subscript>O<Subscript>4</Subscript> (M=Mg,Mn, Fe,Co, Ni,Cu, Zn) microspheres for microwave-triggered controllable drug delivery

Spinel ferrites can be used in magnetic targeting and microwave heating and can therefore be used for targeted and controllable drug delivery. We used the cetyltrimethylammonium bromide-assisted solvothermal method to synthesize a series of spinel ferrites (M_xFe_3-xO₄, M=Mg, Mn, Fe, Co, Ni, Cu, Zn) with a mesoporous or hollow-mesoporous structure suitable for direct drug loading and the particle diameters ranging from 200 to 350 nm. We investigated the effects of M²⁺ cation on the morphology and properties of these products by analyzing their transmission electron microscopy images, mesoporous properties, magnetic properties, and microwave responses. We chose hollow-mesoporous M_xFe_3-xO₄ (M=Fe, Co, Zn) nanoparticles, which had better overall properties, for the drug VP16 (etoposide) loading and microwave-controlled release. The Co_xFe_3-xO₄ and Fe₃O₄ particles trapped 61.5 and 64.8%, respectively, of the VP16, which were higher than that (60.4%) of Zn_xFe_3-xO₄. Controllable drug release by these simple magnetic nanocarriers can be achieved by microwave irradiation, and VP16-loaded Co_xFe_3-xO₄ released the most VP16 molecules (more than 50% after 1 h and 69.1% after 6 h) under microwave irradiation. Our results confirm the favorable drug loading and microwave-controlled delivery by these ferrites, and lay a theoretical foundation to promote clinical application of the targeted controllable drug delivery system.

Open image in new window

Graphical abstract In the present study, we prepared mesoporous or hollow-mesoporous spinel ferrites (M_xFe_3-xO₄, M=Mg, Mn, Fe, Co, Ni, Cu, Zn) by CTAB-assisted solvothermal method and solved the problem of Cu and Ni impurities in Cu_xFe_3-xO₄ and Ni_xFe_3-xO₄ products by means of magnetic separation and additional redox reactions, respectively. We investigated the effects of the M²⁺ cation on the morphology, mesoporous properties, magnetic properties, and microwave responses of these ferrites. Then, the drug loading and microwave-controlled drug release of hollow-mesoporous M_xFe_3-xO₄ (M?=?Fe, Co, Zn) nanoparticles with better overall properties were also studied. Co_xFe_3-xO₄ has the best overall performances for microwave-controlled drug release.

     

Comparative analysis of the effect of La and Co on the superconductivity and energyband spectrum of YBa2Cu3Oy for different oxygen contents

Temperature dependences of the resistivity and Seebeck coefficient of Y(Ba_1−x La_x)₂Cu₃O_y and YBa₂Cu_3−x Co_xO_y samples (x=0–0.25) have been measured under maximum sample saturation with oxygen, as well as following their anneal in an oxygen-deficient atmosphere. The T _c (x) dependences for as-prepared samples were found to pass through a maximum at x=0.05, which persists after annealing for Y(Ba_1−xLa_x)₂Cu₃O_y and disappears for YBa₂Cu_3−x Co_xO_y. A phenomenological model of the band spectrum in normal phase has been used to determine the parameters of the conduction band and of the carrier system, and to analyze their variation with the dopant type and content, as well as with annealing. Despite the differences observed in the T _c (x) dependence, the critical temperatures for all the sample series studied were found to correlate with the conduction-band effective width. The mechanism of the effect of impurities on the band-structure parameters and the reasons for the different influence of annealing on the properties of Y(Ba_1−x La_x)₂Cu₃O_y and YBa₂Cu_3−x Co_xO_y are discussed. Fiz. Tverd. Tela (St. Petersburg) 41, 389–394 (March 1997)     

Local structure,magnetism, and superconductivity in Sr analogs of Fe-doped YBa2Cu3−y Fe y O6+x

The local structure, magnetism, and superconductivity of Y_1–z Ca _z Sr₂Cu_3–y Fe _y O_6+x have been investigated by magnetic susceptibility,⁵⁷Fe Mössbauer absorption spectroscopy, X-ray powder diffraction, and iodometric titration. By modification of the hole distribution between the Cu(1)O _x chains and Cu(2)O₂ sheets, we induced bulk superconductivity with a maximum superconducting critical temperatureT _c near 20 K in Y–zCa _z Sr₂Cu_2.5Fe_0.5O_6+x (0.05z0.18). We interpret the development of a broad maximum inT _c and the Meissner fractionV _f versusz nearz=0.12 to be due to an increasing transfer of holes from the Cu(1)O _x chains to the Cu(2)O₂ sheets induced by a shorterc-axis and reduced Coloumb repulsion of the positively charged Y_1–z Ca _z plane. The increase in hole transfer from the Cu(1)O _x chains to the Cu(2)O₂ sheets also modulates the magnetic ordering temperatureT _m. We show thatT _m of YSr₂Cu₂FeO_7.26 is approximately 65 K, which is much lower than that observed in YBa₂Cu_2.31Fe_0.69O_7.21 (T _m400 K).     

A Mössbauer study of Bi2Sr2Ca n-1 (Cu,Fe) n O y (n=1,2,3) oxide superconductors

Mossbauer spectra of⁵⁷Fe have been measured for Bi₂Sr₂Ca_n-1(Cu, Fe)_nO_y (n=1,2,3) oxide superconductors. Each spectrum was decomposed to a single set or two sets of double peaks. The assignment of these peaks to the specific sites for the iron atoms are discussed. The 4 fold planar sites of Cu₂O plane are preferentially substituted by Fe atoms.     

Superconductivity and magnetic order in RBa2Cu3Oz

Mössbauer studies of⁵⁷Fe in RBa_2?y K _y (Cu_1?x Fe _x )₃O_z, with R=Y and Pr;y=0 and 0.5;x=0.01, 0.05 and 0.1 andz between 5.9 and 7.1, have been performed. A minority of the iron ions enter the Cu(2) site and reveal its magnetic order. In nonsuperconducting YBa_1.5K_0.5(Cu_0.95Fe_0.05)₃O_6.1 two distinctly inequivalent magnetic iron sites are observed, probably corresponding to iron in the Cu(2) site with different Ba?K neighbours. In superconducting (T _c =60 K) YBa_1.5K_0.5(Cu_0.95Fe_0.05)₃O_6.5 one Cu(2) subsite remains magnetic (T _N=440 K). The implications of these findings on the valencies of the Cu ions are discussed.     

Recent advances on Fe- and Mn-based cathode materials for lithium and sodium ion batteries

The ever-growing market of electrochemical energy storage impels the advances on cost-effective and environmentally friendly battery chemistries. Lithium-ion batteries (LIBs) are currently the most critical energy storage devices for a variety of applications, while sodium-ion batteries (SIBs) are expected to complement LIBs in large-scale applications. In respect to their constituent components, the cathode part is the most significant sector regarding weight fraction and cost. Therefore, the development of cathode materials based on Earth’s abundant elements (Fe and Mn) largely determines the prospects of the batteries. Herein, we offer a comprehensive review of the up-to-date advances on Fe- and Mn-based cathode materials for LIBs and SIBs, highlighting some promising candidates, such as Li- and Mn-rich layered oxides, LiNi_0.5Mn_1.5O₄, LiFe_1-xMn_xPO₄, Na_xFe_yMn_1-yO₂, Na₄MnFe₂(PO₄)(P₂O₇), and Prussian blue analogs. Also, challenges and prospects are discussed to direct the possible development of cost-effective and high-performance cathode materials for future rechargeable batteries.