Substituent effect investigation of 3‐(2, 4‐dichlorophenyl)‐1‐(4′‐X‐phenyl)‐2‐propen‐1‐one. Part 1. Correlation analysis of 13C NMR chemical shifts

A series of substituted chlorinated chalcones namely, 3‐(2,4‐dichlorophenyl)‐1‐(4′‐X‐phenyl)‐2‐propen‐1‐one, have been synthesized, X being H, NH₂, OMe, Me, F, Cl, CO₂Et, CN, and NO₂. Dual substituent parameter (DSP) models of ¹³C NMR chemical shift (CS) have revealed that π‐polarization concept could be utilized to explain the reverse field effect at CO, the enhanced substituent field effect at CO, C‐2, and C‐5, and the decreased sensitivity of substituent field effect at C‐6. Chlorine atoms dipole direction at the benzylidene ring either enhances or reduces substituent effect depending on how they couple with the substituent dipole at the probe site. The correlation of ¹³C NMR CS of C‐2, C‐5, and C‐6 with σ and σ indicates that chlorine atoms in the benzylidine ring deplete the ring from charges. Both MSP of Hammett and DSP of Taft ¹³C NMR CS models give similar trends of substituent effects at C‐2, C‐5, and C‐6. However, the former fail to give a significant correlation for CO and C‐6 ¹³C NMR CS. MSP of σ_q and DSP of Taft and Reynolds models significantly correlated ¹³C NMR CS of C_β. MSP of σ_q fails to correlate C‐1′ ¹³C NMR CS. Investigation of ¹³C NMR CS of non‐chlorinated chalcones series: 3‐phenyl‐1‐(4′‐X‐phenyl)‐2‐propen‐1‐one has revealed similar trends of substituent effects as in the chlorinated chalcones series for C‐1′, CO, C_α, and C_β. In contrast, the substituent effect of the non‐chlorinated chalcone series at C‐2, C‐5, and C‐6 did not correlate with any substituent constant. Copyright © 2010 John Wiley & Sons, Ltd.     

The electrochemical reduction of CO2 on a copper electrode in 1‐n‐butyl‐3‐methyl imidazolium tetrafluoroborate (BMI.BF4) monitored by surface‐enhanced Raman scattering (SERS)

The electrochemical conversion of CO₂ into value‐added products using room temperature ionic liquids as solvent/electrolyte has been proposed as an alternative to minimize the environmental effects of CO₂ emissions. A key issue in the design of electrochemical systems for the reduction of CO₂ is the in situ identification of intermediate surface species as well as reaction products. Copper electrodes, besides being used as cathodes in the electrochemical reduction of CO₂, present surface‐enhanced Raman scattering (SERS) when properly activated. In this sense, the electrochemical reduction of CO₂ over a copper electrode in the room temperature ionic liquids 1‐n‐butyl‐3‐methyl imidazolium tetrafluoroborate (BMI.BF₄) was investigated by cyclic voltammetry and by in situ SERS. The cyclic voltammetries have shown that the presence of CO₂ on the BMI.BF₄ anticipates the reduction of BMI⁺ to the corresponding carbene. Fourier‐transform‐SERS spectra excited at 1064 nm and SERS spectra excited at 632.8 nm have shown vibrational signals from adsorbed CO. These SERS results indicated that CO adsorbs on the copper surface at two different surface sites. The observation of a 2275 cm⁻¹ vibration in the SERS spectra also confirmed the presence of chemically adsorbed CO₂. Other products of CO₂ reduction in BMI.BF₄, besides CO, were identified, including BMI carbene and the BMI‐CO₂ adduct. The SERS results also suggest that the presence of a thin film of Cu₂O on the copper surface anticipates the reduction of CO₂ to CO, an important component of syngas. Copyright © 2016 John Wiley & Sons, Ltd.     

Facile Synthesis of Gd(OH)3‐Doped Fe3O4 Nanoparticles for Dual‐Mode T1‐ and T2‐Weighted Magnetic Resonance Imaging Applications

The facile hydrothermal synthesis of polyethyleneimine (PEI)‐coated iron oxide (Fe₃O₄) nanoparticles (NPs) doped with Gd(OH)₃ (Fe₃O₄‐Gd(OH)₃‐PEI NPs) for dual mode T₁‐ and T₂‐weighted magnetic resonance (MR) imaging applications is reported. In this approach, Fe₃O₄‐Gd(OH)₃‐PEI NPs are synthesized via a hydrothermal method in the presence of branched PEI and Gd(III) ions. The PEI coating onto the particle surfaces enables further modification of poly(ethylene glycol) (PEG) in order to render the particles with good water dispersibility and improved biocompatibility. The formed Fe₃O₄‐Gd(OH)₃‐PEI‐PEG NPs have a Gd/Fe molar ratio of 0.25:1 and a mean particle size of 14.4 nm and display a relatively high r₂ (151.37 × 10^?3m ^?1 s^?1) and r₁ (5.63 × 10^?3m ^?1 s^?1) relaxivity, affording their uses as a unique contrast agent for T₁‐ and T₂‐weighted MR imaging of rat livers after mesenteric vein injection of the particles and the mouse liver after intravenous injection of the particles, respectively. The developed Fe₃O₄‐Gd(OH)₃‐PEI‐PEG NPs may hold great promise to be used as a contrast agent for dual mode T₁‐ and T₂‐weighted self‐confirmation MR imaging of different biological systems.     

Experimental and theoretical FT‐IR and FT‐Raman spectroscopic analysis of N1‐methyl‐2‐chloroaniline

In this work, the experimental and theoretical vibrational spectra of N1‐methyl‐2‐chloroaniline (C₇H₈NCl) were studied. FT‐IR and FT‐Raman spectra of the title molecule in the liquid phase were recorded in the region 4000–400 cm^?1 and 3500–50 cm^?1, respectively. The structural and spectroscopic data of the molecule in the ground state were calculated by using density functional method (B3LYP) with the 6‐311++G(d,p) basis set. The vibrational frequencies were calculated and scaled values were compared with experimental FT‐IR and FT‐Raman spectra. The observed and calculated frequencies are found to be in good agreement. The complete assignments were performed on the basis of the total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method. ¹³C and ¹H NMR chemical shifts results were compared with the experimental values. The optimized geometric parameters (bond lengths and bond angles) were given and are in agreement with the corresponding experimental values of aniline and p‐methyl aniline. Copyright © 2008 John Wiley & Sons, Ltd.     

Conformational analysis of 4,4‐dimethyl‐1‐(trifluoromethylsulfonyl)‐1,4‐azasilinane and 2,2,6,6‐tetramethyl‐4‐(trifluoromethylsulfonyl)‐1,4,2,6‐oxazadisilinane

4,4‐Dimethyl‐1‐(trifluoromethylsulfonyl)‐1,4‐azasilinane 1 and 2,2,6,6‐tetramethyl‐4‐(trifluoromethylsulfonyl)‐1,4,2,6‐oxazadisilinane 2 were studied by variable temperature dynamic ¹H, ¹³C, ¹⁹F NMR spectroscopy and theoretical calculations at the DFT (density functional theory) and MP2 (Møller‐Plesset 2) levels of theory. Both kinetic (barriers to ring inversion) and thermodynamic data (frozen conformational equilibria) could be obtained for the two compounds. The computations revealed two minima on the potential energy surface for molecules 1 and 2 corresponding to the rotamers with the CF₃SO₂ group directed ‘inward’ and ‘outward’ the ring, the latter being 0.2–0.4 kcal/mol (for 1 ) and 1.1 kcal/mol (for 2 ) more stable than the former. The vibrational calculations at the DFT and MP2 levels of theory give the values of the free energy difference ΔG^o for the ‘inward’ ‘outward’ equilibrium consistent with those determined from the experimentally measured ratio of the rotamers. The structure of crystalline compound 2 was ascertained by X‐ray diffraction analysis. Copyright © 2011 John Wiley & Sons, Ltd.     

1,3‐Bis(2′‐hydroxyethyl)imidazolium ionic liquids: correlating structure and properties with anion hydrogen bonding ability

A series of 1,3‐bis(2′‐hydroxyethyl)imidazolium ionic liquids is reported where ¹H NMR chemical shift values and thermal stabilities (T_d), as determined by thermogravimetric analysis, are correlated with the hydrogen bonding capability of various anions ([Cl^?], [Br^?], [CF₃CO₂^?], [NO₂^?], [MsO^?], [NO₃^?], [TfO^?], [BF₄^?], [NTf₂^?], and [PF₆^?]). Use of anions with the strongest hydrogen bonding capability, such as chloride [Cl^?], bromide [Br^?], and trifluoroacetate [CF₃CO₂^?], led to the furthest observed downfield chemical shift values in DMSO‐d₆ and the poorest thermal stabilities ([CF₃CO₂^?] < 200 °C). Thermal stabilities in excess of 350 °C and upfield chemical shift values were observed for ionic liquids, which employed the weakly coordinating triflate [OTf^?], tetrafluoroborate [BF₄^?], or bis(trifluoromethylsulfonyl)imide [NTf₂^?] anion. Optimized structures of selected ionic liquids, as determined by density functional theory calculations at the B3LYP/6‐31G + (d,p) level, indicated that the anion preferred to be located above the imidazolium ring and in close proximity to the hydroxyl groups. Calculated dissociation energies (ΔE) and a comparison of key bonding distances (C2―H, (C2)H···X, O―H, and (O)H···X) also confirmed this structural preference. Copyright © 2013 John Wiley & Sons, Ltd.     

Raman spectroscopy of 3‐(pent‐1‐enyl) methyl ether and selected deuterium‐labelled analogues

The Raman spectra of 3‐(pent‐1‐enyl) methyl ether (3‐methoxypent‐1‐ene) and four deuterium‐labelled analogues are reported and discussed. Correlations between specific structural features and the associated Raman bands are developed, with a view to enhancing the analytical application of Raman spectroscopy in investigating materials containing an alkenyl group. Particular attention is given to developing means of distinguishing the methyl group attached to the carbon skeleton from that of the methoxy group, to maximize the analytical utility of the signals associated with ν(sp² CH), ν(sp² CH₂) and ν(CC) stretching vibrations, and to interpreting in more detail certain δ(sp² CH) and δ(sp² CH₂) vibrations of the atoms of the double bond. These results establish a definitive spectroscopic protocol for differentiating a methoxy group from a methyl substituent attached directly to a carbon atom in unsaturated ethers. Copyright © 2007 John Wiley & Sons, Ltd.     

Theoretical design on a new double functional device of 2,2′‐bipyridine‐embedded N‐(9‐pyrenyl methyl)aza‐15‐crown‐5

Theoretical design on a new molecular switch and fluorescent chemosensor double functional device of aza‐crown ether (2,2′‐dipyridine‐embedded N‐(9‐anthraceneyl(pyrenyl)methyl)aza‐15‐crown‐5) was explored. The interactions between ligands and a series of alkaline earth metal cations (Mg²⁺, Ca²⁺, Sr²⁺, and Ba²⁺) were investigated. The fully optimized geometry structures of the free ligands ( L _1, L ₂) and their metal cation complexes ( L ₁/M²⁺, L ₂/M²⁺) were calculated with the B3LYP/6‐31G(d) method. The natural bond orbital analysis, which is based on optimized geometric structures, was used to explore the interaction of L ₁/M²⁺, L ₂/M²⁺ molecules. The absorption spectra of L _1, L ₂, L ₁/M²⁺, and L ₂/M²⁺, and their excited states were studied by time‐dependent density functional theory. A new type molecular device L ₂(2,2′‐dipyridine‐embedded N‐(9‐pyrenyl methyl)aza‐15‐crown‐5) is designed, which not only has the selectivity for Sr²⁺, and construct allosteric switch, but also has fluorescent sensor performance.     

Calculated polar substituent effects on the stability of 4‐substituted(X) ‐ cub‐1‐yl and ‐bicyclo[2.2.2]oct‐1‐yl cations: a DFT study

The effects of substituents on the stability of 4‐substituted(X) cub‐1‐yl cations ( 2 ), as well as the benchmark 4‐substituted(X) bicyclo[2.2.2]oct‐1‐yl cation systems ( 7 ), for a set of substituents (X = H, NO₂, CN, NC, CF₃, COOH , F, Cl, HO, NH₂, CH₃, SiH₃, Si(CH₃)₃, Li, O^?, and NH) covering a wide range of electronic substituent effects were calculated using the DFT theoretical model at the B3LYP/6‐311 + G(2d,p) level of theory. Linear regression analysis was employed to explore the relationship between the calculated relative hydride affinities (ΔE, kcal/mol) of the appropriate isodesmic reactions for 2 / 7 and polar field/group electronegativity substituent constants (σ_F and σ_χ, respectively). The analysis reveals that the ΔE values of both systems are best described by a combination of both substituent constants. This highlights the distinction between through‐space and through‐bond electronic influences characterized by σ_F and σ_χ, respectively. Copyright © 2010 John Wiley & Sons, Ltd.     

Conformational analysis of 3,3‐dimethyl‐3‐silathiane, 2,3,3‐trimethyl‐3‐silathiane and 2‐trimethylsilyl‐3,3‐dimethyl‐3‐silathiane—preferred conformers,barriers to ring inversion and substituent effects

The first conformational analysis of 3‐silathiane and its C‐substituted derivatives, namely, 3,3‐dimethyl‐3‐silathiane 1 , 2,3,3‐trimethyl‐3‐silathiane 2 , and 2‐trimethylsilyl‐3,3‐dimethyl‐3‐silathiane 3 was performed by using dynamic NMR spectroscopy and B3LYP/6‐311G(d,p) quantum chemical calculations. From coalescence temperatures, ring inversion barriers ΔG^≠ for 1 and 2 were estimated to be 6.3 and 6.8 kcal/mol, respectively. These values are considerably lower than that of thiacyclohexane (9.4 kcal/mol) but slightly higher than the one of 1,1‐dimethylsilacyclohexane (5.5 kcal/mol). The conformational free energy for the methyl group in 2 (?ΔG° = 0.35 kcal/mol) derived from low‐temperature ¹³C NMR data is fairly consistent with the calculated value. For compound 2 , theoretical calculations give ΔE value close to zero for the equilibrium between the 2 ‐Me_ax and 2 ‐Me_eq conformers. The calculated equatorial preference of the trimethylsilyl group in 3 is much more pronounced (?ΔG° = 1.8 kcal/mol) and the predominance of the 3 ‐SiMe_{3 eq} conformer at room temperature was confirmed by the simulated ¹H NMR and 2D NOESY spectra. The effect of the 2‐substituent on the structural parameters of 2 and 3 is discussed. Copyright © 2010 John Wiley & Sons, Ltd.     

The substituent effect on the UV energy of 4,4′‐disubstituted benzylideneanilines

In this paper, 72 samples of disubstituted benzylideneanilines were all synthesized, and their UV data were measured in anhydrous ethanol. In the study on the UV energy of the titled compounds with single substituent changed, for the effect of the aniline substituent Y on the UV wavenumbers, its UV data can be correlated with a dual‐parameter equation; for the effect of benzylidene substituent X on the UV data, its UV energy can be correlated with a single‐parameter equation (Y is an electron‐withdrawing group and H) or a dual‐parameter equation (Y is an electron‐donating group). In the study on the UV energy of model compounds with double substituents changed, a correlation equation between the UV absorption wavenumbers and substituent constants and σ_p, was obtained. For 72 samples of 4,4′‐disubstituted benzylideneanilines, the correlation coefficient was 0.9876, and the standard deviation s was only 358.46 cm^–1. The equation can be used to predict well the UV energy of BA derivatives. It was found that Δσ² is a better parameter than σ_XY to scale the substituent cross‐interaction effect on the UV wavenumbers of benzylideneanilines molecules. The results implied that the law of substituent effect on the UV energy of titled compounds is different from that of substituted stilbenes, and it is helpful to understand the effect of substituent effects on the chemical and physical properties of conjugated compounds with an imine bridging group (C = N) or a nonplanar parent. Copyright © 2011 John Wiley & Sons, Ltd.     

Substituent effects on gas‐phase homolytic Fe–N bond energies of m‐G‐C6H4NHFe(CO)2(η5‐C5H5) and m‐G‐C6H4N(COMe)Fe(CO)2(η5‐C5H5) studied using density functional theory methods

One of the most fundamental properties in chemistry is the bond dissociation energy, the energy required to break a specific bond of a molecule. In this paper, the Fe–N homolytic bond dissociation energies [ΔH_homo(Fe–N)'s] of 2 series of (meta‐substituted anilinyl)dicarbonyl(η⁵‐cyclopentadienyl) iron [m‐G‐C₆H₄NHFp ( 1 )] and (meta‐substituted α‐acetylanilinyl)dicarbonyl(η⁵‐cyclopentadienyl) iron [m‐G‐C₆H₄N(COMe)Fp ( 2 )] were studied using density functional theory methods with large basis sets. In this study, Fp is (η⁵‐C₅H₅)Fe(CO)₂, and G is NO₂, CN, COMe, CO₂Me, CF₃, Br, Cl, F, H, Me, MeO, and NMe₂. The results show that Tao‐Perdew‐Staroverov‐Scuseria, Minnesota 2006, and Becke's power‐series ansatz from 1997 with dispersion corrections functionals can provide the best price/performance ratio and accurate predictions of ΔH_homo(Fe–N)'s. The ΔΔH_homo(Fe–N)'s ( 1 and 2 ) conform to the captodative principle. The polar effects of the meta‐substituents show the dominant role to the magnitudes of ΔΔH_homo(Fe–N)'s. σ_α· and σ_c· values for meta‐substituents are all related to polar effects. Spin‐delocalization effects of the meta‐substituents in ΔΔH_homo(Fe–N)'s are small but not necessarily zero. RE plays an important role in determining the net substituent effects on ΔH_homo(Fe–N)'s. Insight from this work may help the design of more effective catalytic processes.     

Thioenols and thioamides substituted by two β‐EWGs. Comparison with analogous amides and enols

Condensation of organic isothiocyanates with active methylene compounds gave nine thioamides RNHCSCHYY′ or their isomeric thioenols RNHC(SH) = CYY′ for substrates in which Y and Y′ are electron‐withdrawing groups (EWG). These included derivatives of Meldrum's acid (MA) which showed 100% thioenol in all solvents. For other compounds the percentages of thioenol in CDCl₃ when R = Ph are 100% when Y = CN and Y′ = CO₂Me or Y′ = CO₂CH₂CCl₃, 6% when Y = Y′ = CO₂CH₂CF₃, and 0% when Y = Y′ = CO₂Me. The chemical shift of SH (highest values 12.0–16.0 ppm) served as a probe for the thioenol structures and also for the extent of hydrogen bonding to the SH group. In contrast to simple ketones and thioketones in which thioenolization is favored over enolization by factors as large as 10⁶, for intramolecular competition K_Thioenol/K_Enol ratios are much lower than for systems not substituted by β‐EWGs. X‐ray crystallography of the 5‐anilido‐MA derivative shows a hydrogen‐bonded thioenol structure. δ(OH), δ(NH), K_Enol, and crystallographic data for analogous thioenol and enol systems are compared. Copyright © 2008 John Wiley & Sons, Ltd.     

Theoretical studies on 2‐(5‐amino‐3‐nitro‐1,2,4‐triazolyl)‐3,5‐dinitropyridine (PRAN) and its derivatives

In this work, a set of derivatives of 2‐(5‐amino‐3‐nitro‐1,2,4‐triazolyl)‐3,5‐dinitropyridine (PRAN) with different energetic substituents (?N₃, –NO₂, –NH₂, –NF₂) have been studied at the Becke, three‐parameter, Lee–Yang–Parr/aug‐cc‐pvdz, Becke, three‐parameter, Lee–Yang–Parr/6‐31G(d), Becke, three‐parameter, Perdew 86/6‐31G(d), and Becke three‐parameter, Perdew–Wang 91/6‐31G(d,p) levels of density functional theory. The gas‐phase heats of formation were predicted with isodesmic reactions and the condensed‐phase HOFs were estimated with the Politzer approach. The effects of different functionals and basis sets were analyzed. –N₃ and –NO₂ greatly increase while –NH₂ and –NF₂ slightly decrease heats of formation. An analysis of the bond dissociation energies and impact sensitivity shows that all compounds have good stability. The crystal densities (1.82–2.00 g/cm³) computed from molecular packing calculations are big for all compounds and that of the –NF₂ derivative is the largest. All derivatives have higher detonation velocity and detonation pressure than PRAN. Compounds 3 and 4 (R = NO₂ and NF₂) have better performance than hexahydro‐1,3,5‐trinitro‐1,3,5‐trizine and the performance of 4 is quite close to that of 1,3,5,7‐tetranitro‐1,3,5,7‐tetraazacyclooctane, they are promising candidates of high energy compounds and worth further investigations. Copyright © 2012 John Wiley & Sons, Ltd.     

A theoretical investigation about sensing mechanism of fluoride anion for (E)‐2‐(2‐(dimethylamino)ethyl)‐6‐(4‐hydroxystyryl)‐1H‐benzo[de]‐isoquinoline‐1,3 (2H)‐dione

In the present work, we theoretical study the sensing mechanism of a new fluoride chemosensor (E)‐2‐(2‐(dimethylamino)ethyl)‐6‐(4‐hydroxystyryl)‐1H‐benzo[de]‐isoquinoline‐1,3(2H)‐dione (the abbreviation is NIM ). Based on density functional theory and time‐dependent density functional theory methods, the fluoride anion response mechanism has been confirmed via constructing potential energy curve. The exothermal deprotonation process along with the intermolecular hydrogen bond O–H···F reveals the uniqueness of detecting F^?. After capturing hydrogen proton forming NIM‐A anion configuration, a new absorption peak around 655 nm appears in dimethyl sulfoxide solvent. In addition, the emission of NIM can be quenched when adding F^? has been also confirmed. Due to the twisted intramolecular charge transfer character NIM‐A‐S ₁ form, we further verify the experimental phenomenon. The theoretical electronic spectra (vertical excitation energies and fluorescence peak) reproduced previous experimental results (ACS Appl. Mater. Interfaces 2014, 6, 7996), which not only reveals the rationality of our theoretical level used in this work but also confirms the correctness of geometrical attribution. In view of the excitation process, the strong intramolecular charge transfer process of S₀ → S₁ transition explain the redshift of absorption peak for NIM with the addition of fluoride anion. This work presents a straightforward sensing mechanism (deprotonation process) of fluoride anion for the novel NIM chemosensor.     

Acid assisted proton transfer in 4‐[(4‐R‐phenylimino)methyl]pyridin‐3‐ols: NMR spectroscopy in solution and solid state,X‐ray and UV studies and DFT calculations

The behaviour of Schiff bases of 3‐hydroxy‐4‐pyridincarboxaldehyde and 4‐R‐anilines (R?H, CH₃, OCH₃, Br, Cl, NO₂) in acid media has been described. ¹H, ¹³C, ¹⁵N‐NMR chemical shifts allow to establish the protonation site and its influence on the hydroxyimino/oxoenamino tautomerism. DFT calculations, electronic spectra and X‐ray diffraction are in agreement with the NMR conclusions. Copyright © 2007 John Wiley & Sons, Ltd.     

Enols of 2‐nitro‐ and related 2‐substituted malonamides

The structures of 2‐substituted malonamides, YCH(CONR¹R²)CONR³R⁴ (Y = Br, SO₂Me, CONH₂, COMe, and NO₂) were investigated. When Y = Br, R¹R² = R³R⁴ = HEt; Y = SO₂Me, R¹–R⁴ = H and for Y = CONH₂ or CONHPh, R¹–R⁴ = Me, the structure in solution is that of the amide tautomer. X‐ray crystallography shows solid‐state amide structures for Y = SO₂Me or CONH₂, R¹–R⁴ = H. Nitromalonamide displays an enol structure in the solid state with a strong hydrogen bond (O^…O distance = 2.3730 Å at 100 K) and d(OH) ≠ d(O^…H). An apparently symmetric enol was observed in solution, even in appreciable percentages in highly polar solvents such as DMSO‐d₆, but K_enol values decrease on increasing the solvent polarity. The N,N′‐dimethyl derivative is less enolic. Acetylmalonamides display a mixture of enol on the acetyl group and amide in non‐polar solvents, and only the amide in DMSO‐d₆. DFT calculations gave the following order of pK_enol values for Y: H > CONH₂ > COMe ≥ COMe (on acetyl) ≥ MeSO₂ > CN > NO₂ in the gas phase, CHCl₃, and DMSO. The enol on the C?O group is preferred to the aci‐nitro compound, and the N? O? H^…O?C is less favored than the C?O? H^…O?C hydrogen bond. Copyright © 2009 John Wiley & Sons, Ltd.     

Selectivity of nitro versus fluoro substitution in arenes in their reactions with charged O‐ and S‐nucleophiles

The relative mobility of nitro and fluoro substituents in 1,3‐dinitro‐ and 1‐fluoro‐3‐nitrobenzenes, 3,5‐dinitro‐ and 3‐fluoro‐5‐nitrobenzotrifluorides under the action of the nucleophiles (2ArYH)·K₂CO₃ and ArY^?K⁺ in solution and the nucleophiles ArYH·K₂CO₃ (Y = O, S) under heterogeneous conditions was studied by a competitive method in DMF at 40–140 °C. The unique dependences of ΔΔH^≠ on ΔΔS^≠ and ΔΔH^≠ on ΔΔG^≠ were determined for all the substrates and nucleophiles. The dependence of the mechanistic pathway on the nucleophile is discussed. Two results are relevant to the reactions studied: (i) substituent effects in the nucleophiles (2ArYH)·K₂CO₃ and ArYH·K₂CO₃ on the activation entropies suggest that the entropy favours the displacement of nitro group; (ii) the negative signs of ΔΔH^≠ and ΔΔS^≠ for the reactions of the nucleophiles ArY^?K⁺ indicate that the enthalpy determines the displacement of nitro group. It is concluded that the selectivity of the reactions with aryloxide and arylthioxide ions cannot be explained by the hard–soft acid–base principle only. Copyright © 2007 John Wiley & Sons, Ltd.     

Photoinduced electron‐transfer reactions of tris(2,2′‐bipyridine)ruthenium(II)‐based carbonic anhydrase inhibitors tethering plural binding sites

Tris(2,2′‐bipyridine)ruthenium(II) complex‐based carbonic anhydrase (CA) inhibitors, [Ru(bpy)₂(bpydbs)]²⁺ {bpy = 2,2′‐bipyridine and bpydbs = 2,2′‐bipyridinyl‐4,4′‐dicarboxilic acid bis[(2‐{2‐[2‐(4‐sulfamoylbenzoylamino)ethoxy]ethoxy}ethyl)amide]} and [Ru(bpydbs)₃]²⁺, tethering plural benzenesulfonamide groups have been prepared. The CA catalytic activity was effectively suppressed by these synthetic [Ru(bpy)₂(bpydbs)]²⁺ and [Ru(bpydbs)₃]²⁺ inhibitors, and their dissociation constants at pH = 7.2 and at 25°C were determined to be K_I = 0.93 ± 0.02 μM and K_I = 0.24 ± 0.03 μM, respectively. Next, 2 photoinduced electron‐transfer (ET) systems comprising a Ru²⁺‐CA complex and an electron acceptor, such as chloropentaamminecobalt(III) ([CoCl(NH₃)₅]²⁺) or methylviologen (MV²⁺) were studied. In the presence of CA and a sacrificial electron acceptor, such as pentaamminechlorocobalt(III) complex, the photoexcited triplet state of ³([Ru(II)]²⁺)* was quenched through an intermolecular photoinduced ET mechanism. In case of the [Ru(bpydbs)₃]²⁺‐CA‐MV²⁺ system, the photoexcited triplet state of ³([Ru(bpydbs)₃]²⁺)* was quenched by sacrificial quencher through an intermolecular photoinduced ET mechanism, giving the oxidized [Ru(bpydbs)₃]³⁺. Then the following intramolecular ET from the amino acid residue, Tyr6, near the active site of CA proceeded. We observed a transient absorption around at 410 nm, arising from the formation of a Tyr^?+ in the [Ru(bpydbs)₃]²⁺‐CA‐MV²⁺ system. These artificial Ru(II)‐CA systems may clearly demonstrate both intermolecular and intramolecular photoinduced ET reactions of protein and could be one of the interesting models of the ET proteins. Their photophysical properties and the detailed ET mechanisms are discussed in order to clarify the multistep ET reactions.