Composition dependence of nanophase‐separated structures formed by star‐shaped terpolymers of the A1.0B1.0CX type

Several hierarchical nanophase‐separated structures have been observed for a series of ABC star‐shaped terpolymers by transmission electron microscopy (TEM) and electron computerized tomography (3D‐TEM). The seven terpolymers synthesized are composed of polyisoprene (I), polystyrene (S), and poly(2‐vinylpyridine) (P), their volume fraction ratios of I:S:P are 1:1:X, where X equals 0.2, 0.4, 0.7, 1.2, 1.9, 3.0, and 4.9, respectively, and additional four samples were prepared by blending each two parent terpolymers. From morphological observation by TEM and tomography, a terpolymer with X of 0.2 shows lamellar structure with spheres at the interface, those with X ranging from 0.4 to 1.9 show cylindrical structures with two‐dimensional tiling, while those with X of 3.0 and 4.9 show hierarchical cylinders‐in‐lamella structure. Two the other terpolymer samples with X of 7.9 and 10 were produced by blending a P homopolymer with the terpolymer I_1.0S_1.0P_4.9, and they both exhibited columnar piled disk cylinders in P matrix. From the comparison of the present results with the predictions by the Monte–Carlo simulation, it was confirmed that the observed nanophase‐separated structures of the ISP star‐shaped terpolymers are mostly in good agreement with the prediction. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2277–2283, 2007     

Preparation and Morphologies of AB6¯ Block‐Graft Copolymers

Microphase‐separated structures of a series of AB₆ block‐graft copolymers were studied by TEM and SAXS. Ten copolymers with the same polystyrene (S) backbone and six polyisoprene (I) grafts on the average but with different graft chain lengths were carefully synthesized by living anionic polymerization, covering the range 0.21 ≤ ?_S ≤ 0.90, where ?_S denotes polystyrene compositions. From TEM observation of the AB₆ block‐graft copolymers, it turns out to be clear that they show four microphase‐separated structures, S‐spheres, S‐cylinders(S‐prisms), alternative lamellae, and I‐cylinders. Among them, for example, the samples with 0.54 ≤ ?_S ≤ 0.58 shows prism structures whose cross sections of the S domains are close to hexagons, not circles, due to packing frustration of grafts. Composition dependence of morphologies of the present AB₆ block‐graft copolymers reveals their phase diagram is extremely asymmetric with respect to ?_S = 0.5. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 952–960     

Fire and Forget! One‐Shot Synthesis and Characterization of Block‐Like Statistical Terpolymers via Living Anionic Polymerization

Diphenylethylene (DPE) is a monomer which has attracted significant interest from academia and industry both in terms of copolymerization kinetics and for the potential to extend and tune the range of glass transition temperatures accessible for DPE‐containing copolymers. DPE can undergo (co)polymerization with a variety of other monomers by living anionic polymerization but is incapable of forming a homopolymer due to steric hindrance. DPE, being a sterically bulky monomer, results in dramatic increases in the glass transition temperature (T_g) of resulting copolymers, with a perfectly alternating copolymer of styrene and DPE having a T_g of ~180 °C. Herein we report for the first time, the outcome of the statistical terpolymerization of butadiene, styrene, and DPE—a one‐pot, one‐shot, commercially scalable reaction using monomers of wide industrial importance. This extremely facile approach produces copolymers with a block‐like structure, which undergo microphase separation, possess a high T_g glassy “block” and are virtually indistinguishable from analogous block terpolymers made by the traditional sequential addition of monomers approach. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 382–394     

Calcification resistance of polyisobutylene and polyisobutylene‐based materials

Calcification of implanted biomaterials is highly undesirable and limits clinical applicability. Experiments were carried out to assess the calcification resistance of polyisobutylene (PIB), PIB‐based polyurethane (PIB‐PU), PIB‐PU reinforced with (CH₃)₃N⁺CH₂CH₂CH₂NH₂ I^?‐modified montmorillonite (PIB‐PU/nc), PIB‐based polyurethane urea (PIB‐PUU), PIB‐PU containing S atoms (PIB_S‐PU), PIB_S‐PU reinforced with (CH₃)₃N⁺CH₂CH₂CH₂NH₂ I^?‐modified montmorillonite (PIB_S‐PU/nc), and poly(isobutylene‐b‐styrene‐b‐isobutylene) (SIBS), relative to that of a clinically widely implanted polydimethylsiloxane (PDMS)–based PU, Elast‐Eon (the “control”). Samples were incubated in simulated body fluid for 28 days at 37°C, and the extent of surface calcification was analyzed by scanning electron microscopy (SEM), atomic force microscopy (AFM), energy‐dispersive X‐ray spectroscopy (EDX), X‐ray photoelectron spectroscopy (XPS), and Fourier‐transform‐infrared (FT‐IR) spectroscopy. Whereas the PDMS‐based PU showed extensive calcification, PIB and PIB‐PU containing 72.5% PIB, ie, a polyurethane whose surface is covered with PIB, were free of calcification. PIB_S‐PU and PIB‐PUU, ie, polyurethanes that contain S or urea groups, respectively, were slightly calcified. The amine‐modified montmorillonite‐reinforcing agent reduced the extent of calcification. SIBS was found slightly calcified. Evidently, PIB and materials fully coated with PIB are calcification resistant.     

Low‐Spin Pseudotetrahedral Iron(I) Sites in Fe2(μ‐S) Complexes

Fe^I centers in iron–sulfide complexes have little precedent in synthetic chemistry despite a growing interest in the possible role of unusually low valent iron in metalloenzymes that feature iron–sulfur clusters. A series of three diiron [(L₃Fe)₂(μ‐S)] complexes that were isolated and characterized in the low‐valent oxidation states Fe^II? S? Fe^II, Fe^II? S? Fe^I, and Fe^I? S? Fe^I is described. This family of iron sulfides constitutes a unique redox series comprising three nearly isostructural but electronically distinct Fe₂(μ‐S) species. Combined structural, magnetic, and spectroscopic studies provided strong evidence that the pseudotetrahedral iron centers undergo a transition to low‐spin S=1/2 states upon reduction from Fe^II to Fe^I. The possibility of accessing low‐spin, pseudotetrahedral Fe^I sites compatible with S^2? as a ligand was previously unknown.     

SnS‐Quantum Dot Solar Cells Using Novel TiC Counter Electrode and Organic Redox Couples

Low‐cost quantum‐dot sensitized solar cells (QDSSCs) were fabricated by using the earth‐abundant element SnS quantum dot, novel TiC counter electrodes, and the organic disulfide/thiolate (T₂/T^?) redox couple, and reached an efficiency of 1.03 %. QDSSCs based on I^?/I₃^?, T₂/T^?, and S^2?/S_x^2? redox couples were assembled to study the role of the redox couples in the regeneration of sensitizers. Charge‐extraction results reveal the reasons for the difference in J_SC in three QDSSCs based on I^?/I₃^?, T₂/T^?, and S^2?/S_x^2? redox couples. The catalytic selectivity of TiC and Pt towards T₂/T^? and I^?/I₃^? redox couples was investigated using Tafel polarization and electrochemical impedance analysis. These results indicated that Pt and TiC show a similar catalytic selectivity for I^?/I₃^?. However, TiC possesses better catalytic activity for T₂/T^? than for I^?/I₃^?. These results indicate the great potential of transition metal carbide materials and organic redox couples used in QDSSCs.     

Polymerization of n‐hexyl isocyanate with CpTiCl2(OR) (R = functional group or macromolecular chain): A route to ω‐functionalized and block copolymers and terpolymers of n‐hexyl isocyanate

Well‐defined ω‐cholesteryl poly(n‐hexyl isocyanate) (PHIC–Chol), as well as diblock copolymers of n‐hexyl isocyanate (HIC) with styrene, PS‐b‐PHIC [PS = polystyrene; PHIC = poly(n‐hexyl isocyanate)], and triblock terpolymers with styrene and isoprene, PS‐b‐PI‐b‐PHIC and PI‐b‐PS‐b‐PHIC (PI = polyisoprene), were synthesized with CpTiCl₂(OR) (R = cholesteryl group, PS, or PS‐b‐PI) complexes. The synthetic strategy involved the reaction of the precursor complex CpTiCl₃ with cholesterol or the suitable ω‐hydroxy homopolymer or block copolymer, followed by the polymerization of HIC. The ω‐hydroxy polymers were prepared by the anionic polymerization of the corresponding monomers and the reaction of the living chains with ethylene oxide. The reaction sequence was monitored by size exclusion chromatography, and the final products were characterized by size exclusion chromatography (light scattering and refractive‐index detectors), nuclear magnetic resonance spectroscopy, and, in the case of PHIC–Chol, differential scanning calorimetry. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6503–6514, 2005     

Multiarm star block and multiarm star mixed‐block copolymers via azide‐alkyne click reaction

The synthesis of multiarm star block (and mixed‐block) copolymers are efficiently prepared by using Cu(I) catalyzed azide‐alkyne click reaction and the arm‐first approach. α‐Silyl protected alkyne polystyrene (α‐silyl‐alkyne‐PS) was prepared by ATRP of styrene (St) and used as macroinitiator in a crosslinking reaction with divinyl benzene to successfully give multiarm star homopolymer with alkyne periphery. Linear azide end‐functionalized poly(ethylene glycol) (PEG‐N₃) and poly (tert‐butyl acrylate) (PtBA‐N₃) were simply clicked with the multiarm star polymer described earlier to form star block or mixed‐block copolymers in N,N‐dimethyl formamide at room temperature for 24 h. Obtained multiarm star block and mixed‐block copolymers were identified by using ¹H NMR, GPC, triple detection‐GPC, atomic force microscopy, and dynamic light scattering measurements. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 99–108, 2010     

(Z)‐2‐Methylbuten‐1‐yl(aryl)iodonium trifluoromethanesulfonates containing electron‐withdrawing groups on the aryl moiety

The crystal structures of [(Z)‐2‐methyl­but‐1‐en‐1‐yl]­[4‐(tri­fluoro­methyl)­phenyl]­iodo­nium tri­fluoro­methane­sulfonate, C₁₂H₁₃F₃I⁺·CF₃O₃S^?, (I), (3,5‐di­chloro­phenyl)­[(Z)‐2‐methyl­but‐1‐en‐1‐yl]­iodo­nium tri­fluoro­methane­sulfonate, C₁₁H₁₂­Cl₂I⁺·CF₃O₃S^?, (II), and bis{[3,5‐bis­(tri­fluoro­methyl)­phenyl][(Z)‐2‐methyl­but‐1‐en‐1‐yl]­iodo­nium} bis­(tri­fluoro­methane­sulfonate) di­chloro­methane solvate, 2C₁₃H₁₂F₆I⁺·­2CF₃­O₃S^?·CH₂Cl₂, (III), are described. Neither simple acyclic β,β‐di­alkyl‐substituted alkenyl­(aryl)­idonium salts nor a series containing electron‐deficient aryl rings have been described prior to this work. Compounds (I)–(III) were found to have distorted square‐planar geometries, with each I atom interacting with two tri­fluoro­methane­sulfonate counter‐ions.     

Cationic polymerization of β-pinene,styrene and α-methylstyrene

Molecular weight distributions determined by gel permeation chromatography demonstrate that α-methylstyrene copolymerizes with both β-pinene and styrene, forming both bi- and terpolymers. The composition of precipitated polymer versus crude polymer, as determined by nuclear magnetic resonance, suggests that β-pinene and styrene also copolymerize. Extraction of the latter bipolymer of β-pinene and styrene with acetone gives only a small amount of insoluble β-pinene homopolymer, confirming that β-pinene and styrene copolymerize in m-xylene. GPC analysis shows that each copolymer contains some homopolymer. A comparison of M _n with molecular weight calculated from NMR analysis, assuming chain transfer to solvent, indicates that chain transfer is the predominant method of forming dead polymer. The carbonium ions of the growing chain tend to transfer to solvent with increasing ease in the order β-pinene, styrene, and α-methylstyrene.     

Determination of block size in poly(ethylene oxide)‐b‐polystyrene block copolymers by matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry

Characterization of block size in poly(ethylene oxide)‐b‐poly(styrene) (PEO‐b‐PS) block copolymers could be achieved by matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF‐MS) after scission of the macromolecules into their constituent blocks. The performed hydrolytic cleavage was demonstrated to specifically occur on the targeted ester function in the junction group, yielding two homopolymers consisting of the constitutive initial blocks. This approach allows the use of well‐established MALDI protocols for a complete copolymer characterization while circumventing difficulties inherent to amphiphilic macromolecule ionization. Although the labile end‐group in PS homopolymer was modified by the MALDI process, PS block size could be determined from MS data since polymer chains were shown to remain intact during ionization. This methodology has been validated for a PEO‐b‐PS sample series, with two PEO of number average molecular weight (M_n) of 2000 and 5000 g mol^?1 and M_n(PS) ranging from 4000 to 21,000 g mol^?1. Weight average molecular weight (M_w), and thus polydispersity index, could also be reached for each segment and were consistent with values obtained by size exclusion chromatography. This approach is particularly valuable in the case of amphiphilic copolymers for which M_n values as determined by liquid state nuclear magnetic resonance might be affected by micelle formation. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3380–3390, 2009     

Graphoepitaxial assembly of cylinder forming block copolymers in cylindrical holes

The graphoepitaxial assembly of cylinder‐forming block copolymers assembled into holes is investigated through theoretically informed coarse grained Monte Carlo simulations (TICG MC). The aim is to identify conditions leading to assembly of cylinders that span the entire thickness of the holes, thereby enabling applications in lithography. Three hole geometries are considered, including cylinders, elliptical cylinders, and capsule‐shaped holes. Four distinct morphologies of cylinder forming poly(styrene‐b‐methyl methacrylate) (PS‐b‐PMMA) block copolymers are observed in cylinders and elliptical holes, including cylinders, spheres, partial cylinders, and wall‐bound cylinders. Additional morphologies are observed in capsule‐shaped holes. PMMA cylinders that extend through the entire hole are found with PMMA‐wetting surfaces; a weak wetting condition is needed on the bottom of the hole and a strong wetting condition is necessary on the sides of the hole. Simulated are also used to explore the morphologies that arise when holes are overfilled, or when PMMA homopolymers are added in blends with copolymers. We find that overfilling can alter considerably the morphological behavior of copolymers in cylinders and, for blends; we find that when the homopolymer concentration is >10%, the range of conditions for formation of PMMA cylinders that extend through the entire hole is increased. In general, results from simulations (TICG) are shown to be comparable to those of self‐consistent (SCFT) calculations, except for conditions where fluctuations become important. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 430–441     

Initiation and termination mechanism in the cooligomerization of the styrene–methyl methacrylate–carbon tetrachloride system

The analysis of the endgroups of the oligomers produced in the styrene (A)–CCl₄(S) system (system I), the methyl methacrylate(B)–CCl₄ system (system II), and the styrene–methyl methacrylate–CCl₄ system (system III) was carried out in order to clarify the mechanism of the initiation, transfer, and termination. In system I, the number of Cl atoms per oligomer molecule N_Cl increases with the molar ratio of [S]/[A] when the molar ratio of [S]/[A] is below unity and is about four when the molar ratio of [S]/[A] is above unity, and the number of initiator fragments per oligomer molecule N_I decreases with the increase in the molar ratio of [S]/[A]. In system II, N_Cl is about 0.45 over a considerably wide range of the molar ratio of [S]/[B]. In system III, N_Cl increases and N_I decreases with the increase in the molar ratios of [S]/([A] + [B]) and [A]/[B]. From the data of N_Cl and N_I, the fraction I_CC14 of the initiation by the tri-chloromethyl radical in the overall initiation reactions and the fraction T_CC14 of the chain transfer reaction of the growing radical of styrene in all the reactions which produce the cooligomer in the system III were calculated. I_CCl3 and T_CC14 both increase with the molar ratios [S]/([A] + [B]) and [A]/[B].     

Highly conductive soluble terpolymers of aniline,toluidine, and o‐aminobenzoic acid/m‐aminobenzenesulfonic acid

Two series of terpolymers, one of o‐/m‐toluidine and aniline with o‐aminobenzoic acid and the other of o‐/m‐toluidine and aniline with m‐aminobenzenesulfonic acid, have been synthesized by oxidative polymerization via an emulsion method with ammonium persulfate as the oxidant and HCl as the external dopant. The terpolymers exhibit excellent solubility and retain the high conductivity (∼1 S cm⁻¹) characteristic of the unsubstituted homopolymer, polyaniline. The terpolymers also possess higher thermal stability than polyaniline. This can be attributed to the presence of internal doping groups and substituents, which introduce flexibility to the otherwise rigid polyaniline backbone. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3040–3048, 2005     

Macromolecular surfactants for supercritical carbon dioxide applications: Synthesis and characterization of fluorinated block copolymers prepared by nitroxide‐mediated radical polymerization

Poly(perfluorooctyl‐ethylenoxymethylstyrene) (PFDS) and poly(1,1,2,2‐tetrahydroperfluorodecyl acrylate) (PFDA) homopolymers as well as poly(styrene)‐b‐poly(perfluorooctyl‐ethylenoxymethylstyrene) (PS‐b‐PFDS) and poly(styrene)‐b‐poly(1,1,2,2‐tetrahydroperfluorodecyl acrylate) acrylate) (PS‐b‐PFDA) block copolymers of various chain lengths were synthesized by nitroxide‐mediated radical polymerization in the presence of either 2,2,6,6‐tetramethyl‐1‐piperidinyloxy free radical (TEMPO) in the case of FDS monomer or N‐tert‐butyl‐N‐(1‐diethylphosphono‐2,2‐dimethylpropyl)‐N‐oxyl (DEPN) in the case of the FDA monomer. The molar composition of the block copolymers was determined by elemental analysis and proton NMR while the blocky structure was checked by SEC analysis in trifluorotoluene. Block copolymers PS‐b‐PFDS (3.6K/60K) and PS‐b‐PFDA (3.7K/43K) were soluble in neat CO₂ at moderate pressure and temperature, indicating the formation of micelles. Similar block copolymers with a longer PS block such as PS‐b‐PFDA (9.5K/49K), corresponding to a lower CO₂‐philic/CO₂‐phobic balance, were insoluble in neat CO₂ but could be solubilized in the presence of styrene as a cosolvent. Additionally, surface and bulk properties of PS‐b‐PFDA were investigated, indicating the same surface tension as for the PFDA homopolymer (γ_LV = 10.3 mN/m) and a bulk nanostructured morphology. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3537–3552, 2004     

Synthesis and Crystal Structure of a Decanuclear Silver（I）-thiolate Compound Ag10S[S2P（OEt）2]8

A new decanuclear silver(I) compound Ag₁₀(μ₈‐S)(dtp)₈ [dtp=S₂P(OEt)₂] was isolated from a reaction mixture containing W₂S₄(dtp)₂ and AgN0₃, and its solid‐state molecular structure was determinated by X‐ray crystallography. The crystallographic study revealed that the compound contains a distorted mono‐capped quasi‐prism [Ag_io] with an octat‐bridging S atom at the center of the prism. The compound (C₃₂H₈₀Ag₁₀O₁₆P₈S₁₇, M_r=2592.46) crystallizes in the monoclinic P2₁/n space group, with a = 1.5111(5) nm, b=2.3656(8) nm, c=2.284(1) nm, β= 96.88(3)°, V=8.107(5) nm³, Z=4 and D,=2.12 g · cm^?3. The solution using direct method and full‐matrix least‐squares refinement led to R=0.066, Rw=0.078 for 3928 reflections with I3σ(I).     

Effect of Heme–Heme Interactions and Modulation of Metal Spins by Counter Anions in a Series of Diiron(III)‐μ‐hydroxo Bisporphyrins: Unusual Stabilization of Two Different Spins in a Single Molecular Framework

A new family of five ethene‐bridged diiron(III)‐μ‐hydroxo bisporphyrins with the same core structure but different counter anions, represented by the general formula [Fe₂(bisporphyrin)]OH ? X (X=counter anion), is reported herein. In these complexes, two different spin states of Fe are stabilized in a single molecular framework. Protonation of the oxo‐bridged dimer 1 by strong Brønsted acids such as HI, HBF₄, HPF₆, HSbF₆, and HClO₄ produces the μ‐hydroxo complexes with I₅^? ( 2 ), BF₄^? ( 3 ), PF₆^? ( 4 ), SbF₆^? ( 5 ), and ClO₄^? ( 6 ) as counter anions, respectively. The X‐ray structures of 2 and 6 have been determined, which provide a rare opportunity to investigate structural changes upon protonation. Spectroscopic characterization has revealed that the two iron(III) centers in 2 are nonequivalent with nearly high and admixed‐intermediate spins in both the solid state and solution. Moreover, the two different Fe^III centers of 3 – 5 are best described as having admixed‐high and admixed‐intermediate spins with variable contributions of S=5/2 and 3/2 for each state in the solid, but two different admixed‐intermediate spins in solution. In contrast, the two Fe^III centers in 6 are equivalent and are assigned as having high and intermediate spin states in the solid and solution, respectively. The X‐ray structures reveal that the Fe? O bond length increases on going from the μ‐oxo to the μ‐hydroxo complexes, and the Fe‐O(H)‐Fe unit becomes more bent, with the dihedral angle decreasing from 150.9(2)° in 1 to 142.3(3)° and 143.85(2)° in 2 and 6 , respectively. Variable‐temperature magnetic data have been subjected to a least‐squares fitting using the expressions derived from the spin Hamiltonians H=?2JS₁?S₂?μ?B+D[${S{{2\hfill \atop z\hfill}}}$ ?1/3S(S+1)] (for 2 , 3 , 4 , and 5 ) and H=?2JS₁?S₂ (for 6 ). The results show that strong antiferromagnetic coupling between the two Fe^III centers in 1 is attenuated to nearly zero (?2.4 cm^?1) in 2 , whereas the values are ?46, ?32.6, ?33.5, and ?34 cm^?1 for 3 , 4 , 5 , and 6 , respectively.     

Crystallographic evidence of Gly‐d,l‐Met oxidation to its sulfoxide in the presence of gold(III): solid solution of the racemic mixture of two diastereoisomers

Crystallographic analysis of a solid solution of two diastereoisomers, i.e. ({(1S,R)‐1‐carboxy‐3‐[(R,S)‐methylsulfinyl]propyl}aminocarbonyl)methanaminium tetrachloridoaurate(III) and ({(1S,R)‐1‐carboxy‐3‐[(S,R)‐methylsulfinyl]propyl}aminocarbonyl)methanaminium tetrachloridoaurate(III), (C₇H₁₅N₂O₄S)[AuCl₄], has shown that in the presence of gold(III), the methionine part of the Gly‐d ,l ‐Met dipeptide is oxidized to sulfoxide, and no coordination to the Au^III cation through the S atom of the sulfoxide is observed. In view of our observation, literature reports that methionine acts as an N,S‐bidentate donor ligand forming stable gold(III) complexes require verification. Moreover, it has been demonstrated that crystallization of the oxidation product leads to a substantial 77:23 excess of both S‐methionine/R‐sulfoxide and R‐methionine/S‐sulfoxide over S‐methionine/S‐sulfoxide and R‐methionine/R‐sulfoxide. The presence of two different diastereoisomers at the same crystallographic site is a source of static disorder at this site.     

The microstructure determination of ethylene‐styrene‐propylene terpolymers at triad level by high‐temperature two‐dimensional NMR spectra

To further extend temperature range of application and low temperature performance of the ethylene‐styrene copolymers, a series of poly(ethylene‐styrene‐propylene) samples with varying monomer compositions and relatively low glass‐transition temperatures (T_g = −28 – 22 °C) were synthesized by Me₂Si(Me₄Cp)(N‐t‐Bu)TiCl2/MMAO system. Since the ¹³C NMR spectra of the terpolymers were complex and some new resonances were present, 2D‐¹H/¹³C heteronuclear single quantum coherence and heteronuclear multiple bond correlation experiments were conducted. A complete ¹³C NMR characterization of these terpolymers was performed qualitatively and quantitatively, including chemical shifts, triad sequence distributions, and monomer average sequence lengths. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 340–350     

Chemical Speciation of Antimony(III and V) in Water by Adsorptive Cathodic Stripping Voltammetry Using the 4‐(2‐Thiazolylazo) – Resorcinol

A simple adsorptive cathodic stripping voltammetry method has been developed for antimony (III and V) speciation using 4‐(2‐thiazolylazo) – resorcinol (TAR). The methodology involves controlled preconcentration at pH 5, during which antimony(III) – TAR complex is adsorbed onto a hanging mercury drop electrode followed by measuring the cathodic peak current (I_p,c) at ?0.39 V versus Ag/AgCl electrode. The plot of I_p,c versus antimony(III) concentration was linear in the range 1.35×10^?9–9.53×10^?8 mol L^?1.The LOD and LOQ for Sb(III) were found 4.06×10^?10 and 1.35×10^?9 mol L^?1, respectively. Antimony(V) species after reduction to antimony(III) with Na₂SO₃ were also determined. Analysis of antimony in environment water samples was applied satisfactorily.