A novel approach to fabrication of superparamagnetite hollow silica/magnetic composite spheres

We described a method for synthesizing hollow silica/magnetic composite spheres using sulfonic acid functionalized hollow silica spheres (SAFHSS) as templates. The Fe₃O₄ nanoparticles were deposited on or imbedded in the hollow silica shell by a precipitation reaction. The morphologies, composition and properties of the hollow composite spheres were characterized by transmission electron microscopy, Fourier transform infrared analysis, X-ray diffraction measurement and vibrating-sample magnetometry measurement. The results indicated crystal sizes and amount of the Fe₃O₄ nanoparticles on the SAFHSS. The magnetic properties of the hollow composite spheres were controlled by adjusting the proportion between Fe²⁺ and Fe³⁺ and iron ion total concentration. When appropriate loading species were added into the system, superparamagnetite hollow composite spheres were obtained. The method also could be applicable to prepare other superparamagnetite hollow silica/ferrite composite spheres.     

Iron oxide nanoparticles stabilized inside highly ordered mesoporous silica

Nanosized iron oxide, a moderately large band-gap semiconductor and an essential component of optoelectrical and magnetic devices, has been prepared successfully inside the restricted internal pores of mesoporous silica material throughin-situ reduction during impregnation. The samples were characterized by powder XRD, TEM, SEM/EDS, N₂ adsorption, FT-IR and UV-visible spectroscopies. Characterization data indicated well-dispersed isolated nanoclusters of (Fe₂O₃) _n , within the internal surface of 2D-hexagonal mesoporous silica structure. No occluded Fe/Fe₂O₃ crystallites were observed at the external surface of the mesoporous silica nanocomposites. Inorganic mesoporous host, such as hydrophilic silica in the pore walls, directs a physical constraint necessary to prevent the creation of large Fe₂O₃ agglomerates and enables the formation of nanosized Fe₂O₃ particles inside the mesopore     

Controlling magnetic properties of iron oxide nanoparticles using post-synthesis thermal treatment

Changes in morphological and magnetic properties of Fe₃O₄ nanoparticles before and after annealing are investigated in the present work. The nanoparticles are synthesized in a standard capacitively coupled plasma enhanced chemical vapour deposition system with two electrodes using ferrocene as the source compound. Post annealing, due to the sintering process, the particles fuse along with recrystallization. This results in increased size of the nanoparticles and the interparticle interaction, which play a major role in deciding the magnetic properties. X-ray diffraction patterns of the samples before and after annealing indicate a phase change from Fe₃O₄ to Fe₂O₃. Annealing at 200 ^°C causes the apparent saturation magnetization to increase from 6 emu?g^?1 to 15 emu?g^?1. When annealed at 500 ^°C, the magnetic properties of the nanoparticles resemble those of the bulk material. The evidence for the transition from a superparamagnetic state to a collective state is also observed when annealed at 500 ^°C. Variation of the magnetic relaxation data with annealing also reflects the change in the magnetic state brought about by the annealing. The correlation between annealing temperature and the magnetic properties can be used to obtain nanocrystallites of iron oxide with different sizes and magnetic properties.     

Preparation and characterizations of SiO2-coated nanoparticles of Mn0.4Zn0.6Fe2O4

Core/shell nanoparticles consisting of a magnetic core of zinc-substituted manganese ferrite (Mn_0.4Zn_0.6Fe₂O₄) and a shell of silica (SiO₂) are prepared by a sol-gel method using tetraethyl orthosilicate (TEOS) as a precursor material for silica and salts of iron, manganese and zinc as the precursor of the ferrite. Three weight percentages of the shell materials of SiO₂ are used to prepare the coated nanoparticles. The X-ray diffractograms (XRD) of the coated and uncoated magnetic nanoparticles confirmed that the magnetic nanoparticles are in their mixed spinel phase in an amorphous matrix of silica. Particles sizes of the samples annealed at different temperatures are estimated from the width of the (3 1 1) line of the XRD pattern using the Debye-Sherrer equation. The information regarding the crystallographic structure together with the particles sizes extracted from the high-resolution transmission electron microscopy (HRTEM) of a few selected samples are in agreement with those obtained from the XRD. HRTEM observations revealed that particles are coated with silica. The calculated thickness is in agreement with that obtained from the HRTEM pictures. Hysteresis loops observed in the temperature range 300 down to 5 K and Mössbauer spectra at room temperature indicate superparamagnetic relaxation of the nanoparticles.     

Multifunctional core–shell nanoparticles: superparamagnetic,mesoporous, and thermosensitive

Multifunctional core–shell composite nanoparticles (NPs) have been developed by the combination of three functionalities into one entity, which is composed of a single Fe₃O₄ NP as the magnetic core, mesoporous silica (mSiO₂) with cavities as the sandwiched layer, and thermosensitive poly(N-isopropylacrylamide-co-acrylamide) (P(NIPAAm-co-AAm)) copolymer as the outer shell. The mSiO₂-coated Fe₃O₄ NPs (Fe₃O₄@mSiO₂) are monodisperse and the particle sizes were varied from 25 to 95 nm by precisely controlling the thickness of mSiO₂-coating layer. The P(NIPAAm-co-AAm) were then grown onto surface-initiator-modified Fe₃O₄@mSiO₂ NPs through free radical polymerization. These core–shell composite NPs (designated as Fe₃O₄@mSiO₂@P(NIPAAm-co-AAm)) were found to be superparamagnetic with high r ₂ relaxivity. To manipulate the phase transition behavior of these thermosensitive polymer-coated NPs for future in vivo applications, the characteristic lower critical solution temperature (LCST) was subtly tuned by adjusting the composition of the monomers to be around the human body temperature (i.e. 37 °C), from ca. 34 to ca. 42 °C. The thermal response of the core–shell composite NPs to the external magnetic field was also demonstrated. Owing to their multiple functionality characteristics, these porous superparamagnetic and thermosensitive NPs may prove valuable for simultaneous magnetic resonance imaging (MRI), temperature-controlled drug release, and temperature-programed magnetic targeting and separation applications.     

Facile Synthesis of Lactobionic Acid‐Targeted Iron Oxide Nanoparticles with Ultrahigh Relaxivity for Targeted MR Imaging of an Orthotopic Model of Human Hepatocellular Carcinoma

Development of multifunctional nanoprobes for tumor diagnosis is extremely important in the field of molecular imaging. In this study, the facile synthesis of lactobionic acid (LA)‐targeted superparamagnetic iron oxide (Fe₃O₄) nanoparticles (NPs) with ultrahigh relaxivity for targeted magnetic resonance (MR) imaging of an orthotopic hepatocellular carcinoma (HCC) is reported. Polyethyleneimine (PEI)‐stabilized Fe₃O₄ NPs prepared via a mild reduction route are sequentially coupled with fluorescein isothiocyanate and polyethylene glycol‐LA (LA‐PEG‐COOH) segment, followed by acetylation of the remaining PEI surface amines. The formed LA‐targeted Fe₃O₄ NPs are thoroughly characterized. It is shown that the developed multifunctional LA‐targeted Fe₃O₄ NPs are colloidally stable and water‐dispersible, display an ultrahigh r ₂ relaxivity (579.89 × 10^?3 m ^?1 s^?1) and excellent hemocompatibility and cytocompatibility in the given concentration range, and can target HepG2 cells overexpressing asialoglycoprotein receptors as confirmed by in vitro cellular uptake assay, flow cytometry, and confocal microscopy. Most strikingly, the developed multifunctional LA‐targeted Fe₃O₄ NPs can be used as a nanoprobe for targeted MR imaging of HepG2 cells in vitro and an orthotopic tumor model of HCC in vivo. With the ultrahigh r ₂ relaxivity and the versatile PEI amine‐mediated conjugation chemistry, a range of different Fe₃O₄ NP‐based nanoprobes may be developed for theranostics of different types of cancer.     

Novel synthesis of highly ordered mesoporous Fe2O3/SiO2 nanocomposites for a room temperature VOC sensor

The controlled synthesis of mesoporous silica and metal oxide nanocomposites with a highly ordered porous structure and large specific surface area for specific applications has been an attractive topic in the field of porous materials. Herein, we introduce a novel method for the fabrication of highly ordered mesoporous structured and large specific surface area Fe₂O₃/SiO₂ nanocomposites, and consider their application in room temperature gas sensors. The mesoporous Fe₂O₃/SiO₂ nanocomposites were synthesised by a two-step method, which combines the hydrothermal growth of Fe₂O₃ nanoparticles and the microemulsion phase of Brij 56 (C₁₆EO₁₀) surfactant as templates in instantly direct-templating synthesis. This synthesis method enables the fabrication of mesoporous Fe₂O₃/SiO₂ nanocomposites without distortion of the ordered porous structure after calcination at high temperature. The synthesised materials were found to be efficient in a room temperature VOC sensor application, with good recovery.     

Facile Synthesis of Gd(OH)3‐Doped Fe3O4 Nanoparticles for Dual‐Mode T1‐ and T2‐Weighted Magnetic Resonance Imaging Applications

The facile hydrothermal synthesis of polyethyleneimine (PEI)‐coated iron oxide (Fe₃O₄) nanoparticles (NPs) doped with Gd(OH)₃ (Fe₃O₄‐Gd(OH)₃‐PEI NPs) for dual mode T₁‐ and T₂‐weighted magnetic resonance (MR) imaging applications is reported. In this approach, Fe₃O₄‐Gd(OH)₃‐PEI NPs are synthesized via a hydrothermal method in the presence of branched PEI and Gd(III) ions. The PEI coating onto the particle surfaces enables further modification of poly(ethylene glycol) (PEG) in order to render the particles with good water dispersibility and improved biocompatibility. The formed Fe₃O₄‐Gd(OH)₃‐PEI‐PEG NPs have a Gd/Fe molar ratio of 0.25:1 and a mean particle size of 14.4 nm and display a relatively high r₂ (151.37 × 10^?3m ^?1 s^?1) and r₁ (5.63 × 10^?3m ^?1 s^?1) relaxivity, affording their uses as a unique contrast agent for T₁‐ and T₂‐weighted MR imaging of rat livers after mesenteric vein injection of the particles and the mouse liver after intravenous injection of the particles, respectively. The developed Fe₃O₄‐Gd(OH)₃‐PEI‐PEG NPs may hold great promise to be used as a contrast agent for dual mode T₁‐ and T₂‐weighted self‐confirmation MR imaging of different biological systems.     

Role of ligands in the formation, phase stabilization, structural and magnetic properties of α-Fe2O3 nanoparticles

The electrochemical synthesis of alpha Fe₂O₃ nanoparticles was performed using quaternary ammonium salts viz. TPAB, TBAB and TOAB in an organic medium by optimizing current density and molar concentration of the ligand. The role of ligands in the formation of α phase, structure and magnetic properties was investigated in details. The effect of increasing chain length on the particle size confirmed that as the chain length increases from propyl to octyl, the particle size decreases. X-ray diffraction spectra of as prepared samples and TEM analysis confirmed the amorphous nature of iron oxide. TEM showed beads of iron oxide joined together with a size distribution in the range of 6–30 nm. The Mossbauer studies also support this observation that for the lowest particle size, the line width is broader which successively reduces with increase in particle size. Iron oxide capped with TOAB indicated superparamagnetic nature at room temperature. The resultant internal magnetic field of 506 mm/s due to hyperfine splitting clearly established the formation of α-Fe₂O₃ The infrared spectroscopy and pH measurements revealed the binding of tetra alkyl ligand with iron oxide. The IR spectra and the increase in basicity of as prepared samples confirmed the formation of hydrated iron oxide. Above 800°C the spectra indicated only iron oxide. Surface area obtained by BET method was 205 m²/g.     

Size-controlled synthesis of superparamagnetic iron oxide nanoparticles and their surface coating by gold for biomedical applications

The size mono-dispersity, saturation magnetization, and surface chemistry of magnetic nanoparticles (NPs) are recognized as critical factors for efficient biomedical applications. Here, we performed modified water-in-oil inverse nano-emulsion procedure for preparation of stable colloidal superparamagnetic iron oxide NPs (SPIONs) with high saturation magnetization. To achieve mono-dispersed SPIONs, optimization process was probed on several important factors including molar ratio of iron salts [Fe³⁺ and Fe²⁺], the concentration of ammonium hydroxide as reducing agent, and molar ratio of water to surfactant. The biocompatibility of the obtained NPs, at various concentrations, was evaluated via MTT (3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide) assay and the results showed that the NPs were non-toxic at concentrations <0.1 mg/mL. Surface functionalization was performed by conformal coating of the NPs with a thin shell of gold (∼4 nm) through chemical reduction of attached gold salts at the surface of the SPIONs. The Fe₃O₄ core/Au shell particles demonstrate strong plasmon resonance absorption and can be separated from solution using an external magnetic field. Experimental data from both physical and chemical determinations of the changes in particle size, surface plasmon resonance optical band, phase components, core–shell surface composition, and magnetic properties have confirmed the formation of the mono-dispersed core–shell nanostructure.     

Properties of SBA-15 modified by iron nanoparticles as potential hydrogen adsorbents and sensors

SBA-15-Fe was synthesized via the incorporation of Fe⁰ nanoparticles (Fe(0)-Nps) in the mesoporous channels. Electron microscopy and X-ray diffraction showed that dispersion of fine iron NPs occurs mainly inside the channels of SBA-15, producing a slight structure compaction. This was accompanied by a significant improvement of both the affinity towards hydrogen and electrical conductivity, as supported by hydrogen adsorption tests and impedance measurements. CO₂ thermal programmed desorption measurements revealed an attenuation of the acid character of the solid surface. This was explained in terms of strong iron interaction with the lattice oxygen atoms that reduces the SiO–H bond polarity. The close vicinity of fine Fe(0)-Nps combined with the large pore size of SBA-15 appear to contribute to a synergistic improvement of the electrical conductivity. The results reported herein open new prospects for SBA-15 as potential adsorbents for hydrogen storage and carriers for hydrogen sensors. The use of iron in lieu of noble metals for designing such materials is a novelty, because such applications of iron-loaded silica have not been envisaged so far due to the high reactivity of iron towards air and water. The development of such technologies, if any, should address this issue.     

Mechanisms of effective gold shell on Fe3O4 core nanoparticles formation using sonochemistry method

Sonochemical synthesis (sonochemistry) is one of the most effective techniques of breaking down large clusters of nanoparticles (NPs) into smaller clusters or even individual NPs, which ensures their dispersibility (stability) in a solution over a long duration. This paper demonstrates the potential of sonochemistry becoming a valuable tool for the deposition of gold (Au) shell on iron oxide nanoparticles (Fe₃O₄ NPs) by explaining the underlying complex processes that control the deposition mechanism. This review summarizes the principles of the sonochemistry method and highlights the resulting phenomenon of acoustic cavitation and its associated physical, chemical and thermal effects. The effect of sonochemistry on the deposition of Au NPs on the Fe₃O₄ surface of various sizes is presented and discussed. A Vibra-Cell ultrasonic solid horn with tip size, frequency, power output of ½ inch, 20 kHz and 750 W respectively was used in core@shell synthesis. The sonochemical process was shown to affect the surface and structure of Fe₃O₄ NPs via acoustic cavitation, which prevents the agglomeration of clusters in a solution, resulting in a more stable dispersion. Deciphering the mechanism that governs the formation of Au shell on Fe₃O₄ core NPs has emphasized the potential of sonication in enhancing the chemical activity in solutions.     

High-performance sono/nano-catalytic system: Fe3O4@Pd/CaCO3-DTT core/shell nanostructures,a suitable alternative for traditional reducing agents for antibodies

Herein, a novel heterogeneous nanoscale reducing agent for antibody cleavage, made of iron oxide nanoparticles, silica network, palladium on calcium carbonate (10%), and dithiothreitol (Fe₃O₄@Pd/CaCO₃-DTT), is presented as a substantial alternative for traditional homogeneous analogues. Conventionally, antibody fragmentation is accomplished using reducing agents and proteases that digest or cleave certain portions of the immunoglobulin protein structure to provide active thiol sites for drug tagging aims. Then, dialysis process is needed to separate excess chemical structures and purify the reduced antibody. In this work, we have made an effort to design a suitable heterogeneous tool for protein cleavage and skip the dialysis process for purification of the reduced antibody. In this regard, firstly, various preparation methods including microwave irradiation, reflux and ultrasonication have been precisely compared, and it has been proven that the best result is obtained through 10 min ultrasound (US) irradiation using an US bath with 50 KHz frequency and 200 W L⁻¹ power density. Then, all the necessary structural analyses have been done and thoroughly interpreted for the final product. Afterward, the catalytic performance of Fe₃O₄@Pd/CaCO₃-DTT nanoscale system in the presence of US waves (50 KHz, 200 W) has been monitored using some disulphide derivatives. The NPs could be conveniently separated from the mixture through their substantial paramagnetic property. Thus, dialysis process in which various types of membranes are used is practically jumped after the reduction process. In this work, this is clearly demonstrated that there is a constructive synergistic effect between US waves and prepared Fe₃O₄@Pd/CaCO₃-DTT nanoscale reducing agent. Ultimately, trastuzumab (anti HER-2) antibody has been used to test the performance of the prepared Fe₃O₄@Pd/CaCO₃-DTT NPs in a real protein reduction reaction.     

Synthesis of magnetic hollow silica using polystyrene bead as a template

In this paper, we report a new route to synthesize novel magnetic hollow silica nanospheres (MHSNs) using polystyrene particles as sacrificial templates, and TEOS and Fe₃O₄ as precursors. TEM, EDS, XRD, and SQUID were applied to characterize MHSNs. TEM and EDS results show that the MHSNs consist of about 200 nm of hollow cores and ∼35 nm shells with ∼10 nm of Fe₃O₄ nanoparticles embedded. The polystyrene beads were successfully removed by immersing the as-prepared silica nanocomposite in a toluene solution. XRD results demonstrate that the Fe₃O₄ magnetic nanoparticles still keep spinel structure even heated at low temperature. The surface status of the polystyrene beads and Fe₃O₄ nanoparticles has an important effect on the formation of the MHSNs. The MHSNs present a superparamagnetism at room temperature by SQUID measurement. The MHSNs have potential applications in biosystem and nanomedicine.     

Impact of annealing atmosphere on the multiferroic and dielectric properties of BiFeO3/Bi3.25La0.75Ti3O12 thin films

Multiferroic BiFeO₃/Bi_3.25La_0.75Ti₃O₁₂ films annealed in different atmospheres (N₂ or O₂) were prepared on Pt/Ti/SiO₂/Si substrates via a metal organic decomposition method. Based on our experimental results, it is considered that, in the films annealed in N₂, fewer Fe²⁺ ions while more oxygen vacancies are involved. As a result, at room temperature, predominated by the reduced Fe²⁺ fraction, lower leakage current and dielectric loss, better ferroelectric property while reduced magnetization are observed. However, the oxygen vacancies might be thermally activated at elevated temperature; thus, more strongly temperature-dependent leakage current and a higher dielectric relaxation peak are observed for the films annealed in N₂.     

Structure and acid-base properties of surface-modified mesoporous silica

A series of surface-modified mesoporous silica endowing with acid-base properties have been successfully synthesized in one pot by in situ introduction of zirconium and magnesium salts into the initial mixture of synthesizing mesoporous silica (SBA-15) and this method combines into a single step to form a novel material with a periodically ordered mesoporous backbone and specific chemical reactivity of the acid-basic sites. X-ray diffraction, high-resolution transmission electron microscopes (HRTEM), N₂ adsorption, FT-IR transmission spectra, ²⁹Si MAS NMR spectra, NH₃- and CO₂-temperature programmed desorption (TPD) are employed to characterize the titled mesoporous materials. The results indicate that the product possesses excellent acid-basic properties with well mesoporous structure, which make it promising for their application in heterogeneous catalysis and adsorption-separation processes.     

Superparamagnetic silica nanoparticles with immobilized metal affinity ligands for protein adsorption

Superparamagnetic silica-coated magnetite (Fe₃O₄) nanoparticles with immobilized metal affinity ligands were prepared for protein adsorption. First, magnetite nanoparticles were synthesized by co-precipitating Fe²⁺ and Fe³⁺ in an ammonia solution. Then silica was coated on the Fe₃O₄ nanoparticles using a sol–gel method to obtain magnetic silica nanoparticles. The condensation product of 3-Glycidoxypropyltrimethoxysilane (GLYMO) and iminodiacetic acid (IDA) was immobilized on them and after charged with Cu²⁺, the magnetic silica nanoparticles with immobilized Cu²⁺ were applied for the adsorption of bovine serum albumin (BSA). Scanning electron micrograph showed that the magnetic silica nanoparticles with an average size of 190 nm were well dispersed without aggregation. X-ray diffraction showed the spinel structure for the magnetite particles coated with silica. Magnetic measurement revealed the magnetic silica nanoparticles were superparamagnetic and the saturation magnetization was about 15.0 emu/g. Protein adsorption results showed that the nanoparticles had high adsorption capacity for BSA (73 mg/g) and low nonspecific adsorption. The regeneration of these nanoparticles was also studied.     

Formation,Structure and Magnetic Properties of Polymer Matrix Nanocomposites Processed by Thermal Decomposition of the Fe(III)Co(II) Acrylate Complex

Structure and magnetic properties of polymer matrix nanocomposites, processed by pyrolysis of the Fe(III)Co(II) acrylate complex, were investigated. It was shown that thermal transformation of the complex studied consisted of three macrostages: dehydration, solid state polymerisation and decarboxylation of a metallopolymer form. The main products of the decomposition were nanoparticles stabilised by polymeric matrix. The crystalline phases, which were found in the fully processed material, were Fe₃O₄, CoFe₂O₄ and CoO. The mean crystallite size was 10nm. In the intermediate stages of the thermolysis iron was present in the forms of Fe^III (trivalent low – spin iron), Fe²⁺(divalent high – spin iron) and Fe₃O₄. The hysteresis loops measured at temperatures below 200K were opened and shifted towards negative field. The coercivity and remanence showed room temperature values of 0.18T and 15.5mT, respectively.     

High surface area monodispersed Fe3O4 nanoparticles alone and on physical exfoliated graphite for improved supercapacitors

Highly conductive, unsophisticated and easy to be obtained physical exfoliated graphite (PHG) supporting well dispersed magnetite, Fe₃O₄/PHG nanocomposite, has been prepared by a one-step chemical strategy and physico-chemical characterized. The nanocomposite, favoured by the a-polar nanoparticles (NPs) capping, results in a self-assembled monolayer of monodispersed Fe₃O₄, covering perfectly the hydrophobic surfaces of PHG. The nanocomposite as an electrode material was fabricated into a supercapacitor and characterized by cyclic voltammetry (CV) and galvanostatic charge–discharge measurements. It shows, after a suitable annealing, significant electrochemical properties (capacitance value of 787 F/g at 0.5 A g⁻¹ and a Fe₃O₄/PHG weight ratio of 0.31) and good cycling stability (retention 91% after 30,000 cycles). Highly monodispersed very fine Fe₃O₄ NPs, covered by organic chains, have been also synthesized. The high surface area Fe₃O₄ NPs, after washing to leave a low content of organic chains able to avoid aggregation without excessively affecting the electrical properties of the material, exhibit remarkable pseudocapacitive activities, including the highest specific capacitance over reported for Fe₃O₄ (300 F/g at 0.5 A g⁻¹).     

Brownian relaxation of magnetic nanoparticles in fluid: the effect of the solvent

A simple, environmentally friendly hydrothermal stripping route for synthesizing highly size-controlled spherical ferric oxide nanoparticles was developed that involved stripping ferric ion from iron-loaded organic phase. The particle size was found to be influenced by the initial concentration of iron in organic phase, stripping temperature and time, and a mathematical model about the size was established based on the experimental results and theoretical analysis. The model suggests that the process apparent activation energy of stripping iron from organic phase is 97.3? kJ·mol^?1, the energy of crystal growth is 51.6? kJ·mol^?1, and the synthesis of Fe₂O₃ is controlled by the crystal growth of embryo at low temperature (T < 590?K). The sizes calculated by the model comparatively accord with the experimental data and this provides a method for controlling the sizes.