Mechanical and transport property modifications of perfluorosulfonate ionomer membranes prepared with mixed organic and inorganic counterions

Preparation of solution‐processed perfluorosulfonate ionomer membranes containing both small alkali metal and large alkylammonium counterions has been shown to have a profound impact on the mechanical and transport properties of the resulting acidified ionomer. The use of mixed counterions is shown to be an effective means of tailoring the thermomechanical properties of the membrane as evidenced by compositionally dependent relaxations in dynamic mechanical analysis. In agreement with our recent assignments, the α‐relaxation is found to be systematically dependent on the strength of electrostatic interactions, whereas the T_g of Nafion® (i.e., the β‐relaxation) is susceptible to plasticization. Investigations of ionic aggregation using solid‐state ²³Na NMR and small‐angle X‐ray scattering provided information suggesting the presence of mixed aggregates containing populations of both sodium and tetrabutylammonium ions. In contrast to the general perception that proton conductivity tracks with water content, membranes prepared at a 50:50 sodium/tetrabutylammonium counterion composition, followed by conversion to the H⁺‐form, showed a minimum in water content yet relatively high proton conductivity. This behavior suggests that specific interactions during processing affect the organization of the ionic domains and yield persistent structures that can significantly influence membrane transport properties. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2267–2277, 2006     

Correlating backbone‐to‐backbone distance to ionic conductivity in amorphous polymerized ionic liquids

The morphology and ionic conductivity of poly(1‐n‐alkyl‐3‐vinylimidazolium)‐based homopolymers polymerized from ionic liquids were investigated as a function of the alkyl chain length and counterion type. In general, X‐ray scattering showed three features: (i) backbone‐to‐backbone, (ii) anion‐to‐anion, and (iii) pendant‐to‐pendant characteristic distances. As the alkyl chain length increases, the backbone‐to‐backbone separation increases. As the size of counterion increases, the anion‐to‐anion scattering peak becomes apparent and its correlation length increases. The X‐ray scattering features shift to lower angles as the temperature increases due to thermal expansion. The ionic conductivity results show that the glass transition temperature (T_g) is a dominant, but not exclusive, parameter in determining ion transport. The T_g‐independent ionic conductivity decreases as the backbone‐to‐backbone spacing increases. Further interpretation of the ionic conductivity using the Vogel–Fulcher–Tammann equation enabled the correlation between polymer morphology and ionic conductivity, which highlights the importance of anion hoping between adjacent polymer backbones. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

dc Proton conductivity at low‐frequency in Nafion conductivity spectrum probed by time‐resolved SAXS measurements and impedance spectroscopy

The electric transport properties of Nafion membranes are investigated by impedance spectroscopy (IS) and correlated with small angle X‐ray scattering (SAXS). Detailed IS measurements in a wide range of temperature and frequencies (f) allowed separating contributions from different charge carriers in Nafion. At controlled relative humidity and temperature, Nafion IS spectrum exhibits at T > 160 °C two distinct frequency‐independent conductivities occurring at high f ～ 10⁶ Hz and low f < 10^?2 Hz. Such IS measurements were combined with time‐dependent SAXS measurements under applied dc electric potential, which provided compelling evidence that the low‐f dc conductivity is related to the motion of protons via ion‐hopping in hydrated Nafion membranes. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 822–828     

Optimizing the electrochemical performance of imidazolium‐based polymeric ionic liquids by varying tethering groups

We report the synthesis and characterization of a series of novel imidazolium cation and bis(trifluoromethane)sulfonimide anion (TFSI^?)‐based ionic liquid (IL) model compounds and their corresponding polymeric ionic liquids (PILs) with various tethering groups. Ethylene oxide repeating units were attached as tethering groups to an imidazolium cation to optimize the glass transition temperatures (T_g) and ionic conductivities of the PILs. The novel PILs exhibit excellent conductivity values of around 8 × 10^?4 S/cm at room temperature. The thermophysical and electrochemical properties of ILs, including thermal transition, ionic conductivity, and rheological behavior, were characterized to investigate the effect of tethering groups. We conclude that the length of poly(ethylene oxide) tethering group has a tremendous effect on both physical property and electrochemical behavior and that charge carrier density is dominant in defining ionic conductivity with free ILs, whereas ion mobility plays a more important role after polymerization. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1339–1350     

Ionic IPNs as novel candidates for highly conductive solid polymer electrolytes

Five ionic imidazolium based monomers, namely 1‐vinyl‐3‐ethylimidazolium bis(trifluoromethylsulfonyl)imide (ILM1), 1‐vinyl‐3‐(diethoxyphosphinyl)‐propylimidazolium bis(trifluoromethylsulfonyl)imide (ILM2), 1‐[2‐(2‐methyl‐acryloyloxy)‐propyl]‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide (ILM3), 1‐[2‐(2‐methyl‐acryloyloxy)‐undecyl]‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide (ILM4), 1‐vinyl‐3‐ethylimidazolium dicyanamide (ILM5) were prepared and used for the synthesis of linear polymeric ionic liquids (PILs), crosslinked networks with polyethyleneglycol dimethacrylate (PEGDM) and interpenetrating polymer networks (IPNs) based on polybutadiene (PB). The ionic conductivities of IPNs prepared using an in situ strategy were found to depend on the ILM nature, T_g and the ratio of the other components. Novel ionic IPNs are characterized by increased flexibility, small swelling ability in ionic liquids (ILs) along with high conductivity and preservation of mechanical stability even in a swollen state. The maximum conductivity for a pure IPN was equal to 3.6 × 10^?5 S/cm at 20 °C while for IPN swollen in [1‐Me‐3‐Etim] (CN)₂N σ reached 8.5 × 10^?3 S/cm at 20 °C or 1.4 × 10^?2 S/cm at 50 °C. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4245–4266, 2009     

Molecular dynamics and conduction mechanism of poly(vinyl chloride-co-vinyl acetate-co-2-hydroxypropyl acrylate) terpolymer containing ionic liquid

Dielectric spectroscopy (DS) measurements were performed to probe the segmental dynamics and ion mobility of poly(vinyl chloride-co-vinyl acetate-co-2-hydroxypropyl acrylate) terpolymer dopped with different amounts of tetrabutylammonium tetrafluoroborate ([TBA] [BF₄]) ionic liquid (IL). Differential scanning calorimetry (DSC) was also employed to trace the change in the glass transition temperature (T_g) at different loads of IL. The DSC measurements revealed a remarkable reduction in the PVVH T_g from 344 to 310 K just by adding 20 wt% of IL. The DS measurements revealed three relaxation processes named α, β₁, and β₂. The α-process is related to the segmental motion of PVVH while the β₁ and β₂ are due to the restricted local dynamics of side chains. The segmental relaxation times (α-relaxation) speed up with increasing the concentration of IL due to the plasticization effect of IL on polymer chains. The temperature dependence of α-relaxation follows the Vogel-Fulcher-Tammann (VFT) relation with dynamic glass transition between 323 and 294 K in agreement with the DSC measurements. The β₁ and β₂-relaxations have an Arrhenius temperature dependence. The temperature dependence of ionic conductivity obeys the VFT behavior indicating the coupling between the segmental motion of PVVH chains and ion transport. Polaronic tunneling is the predominant conduction mechanism in PVVH and its composites. The specific capacitance increases with increasing both the temperature and IL concentration.     

Comparison of the mechanical properties of styrene‐based ionomers containing either crown ether or pentaethylene glycol with those of underneutralized ionomers

Dynamic mechanical properties of styrene‐based ionomers containing varying amounts of either 15‐crown‐5 ether (CE) or pentaethylene glycol (PG) are compared with those of ionomers of varying degree of neutralization (ND). The cluster T_g (T_g,c) and ionic modulus of the ionomers decrease with increasing amount of CE or PG or decreasing ND. Thus, we propose that the CE binds Na⁺ strongly to form a large‐sized complex. Thus, the electrostatic interactions between charges decrease, leading to lower T_g,c. For the PG‐containing ionomers, the PG acts as polar plasticizer, further lowing the T_g,c. In the case of the underneutralized ionomers, the T_g,c is reduced by the existence of both relatively weak hydrogen bonds between carboxylic acid groups and relatively strong ionic bonds between ion pairs in the multiplets. The small‐angle X‐ray scattering results are also supportive of the above interpretations. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1358–1367     

Molecular mobility of poly(methyl methacrylate) glass during uniaxial tensile creep deformation

An optical photobleaching method has been used to measure the segmental dynamics of a poly(methyl methacrylate) (PMMA) glass during uniaxial creep deformation at temperatures between T_g ? 9 K and T_g ? 20 K. Up to 1000‐fold increases in mobility are observed during deformation, supporting the view that enhanced segmental mobility allows flow in polymer glasses. Although the Eyring model describes this mobility enhancement well at low stress, it fails to capture the dramatic mobility enhancement after flow onset, where in addition the shape of the relaxation time distribution narrows significantly. Regions of lower mobility accelerate their dynamics more in response to an external stress than do regions of high mobility. Thus, local environments in the sample become more dynamically homogeneous during flow. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1713–1727, 2009     

Solid polymer electrolytes. IV. Preparation and characterization of novel crosslinked epoxy‐siloxane polymer complexes as polymer electrolytes

Two series of novel crosslinked siloxane‐based polymers and their complexes with lithium perchlorate (LiClO₄) were prepared and characterized by Fourier transform infrared spectroscopy, solid‐state NMR (¹³C, ²⁹Si, and ⁷Li nuclei), and differential scanning calorimetry. Their thermal stability and ionic conductivity of these complexes were also investigated by thermogravimetric and AC impedance measurements. In these polymer networks, poly(propylene oxide) chains with different molecular weights were introduced through self‐synthesized epoxy‐siloxane precursors cured with two curing agents. The glass‐transition temperature (T_g) of these copolymers is dependent on the length of the ether units. The dissolution of LiClO₄ considerably increases the T_g of the polyether segments. The dependence of the ionic conductivity was investigated as a function of temperature, LiClO₄ concentration, and the molecular weight of the polyether segments. The ion‐transport behavior was affected by the combination of the ionic mobility and number of carrier ions. The ⁷Li solid‐state NMR line shapes of these polymer complexes suggest a significant interaction between Li⁺ ions and the polymer matrix, and temperature‐ and LiClO₄ concentration‐dependent chemical shifts are correlated with ionic conductivity. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1226–1235, 2002     

Clustering in carboxylated polysulfone ionomers: A characterization by dynamic mechanical and small-angle X-ray scattering methods

The dynamic mechanical properties and morphology of carboxylated polysulfone ionomers were investigated by dynamic mechanical thermal analysis and small-angle X-ray scattering (SAXS) techniques. It was found that at 25 mol % of ions, ionomers show two glass transitions: one at about 200 °C (the matrix T_g) and the other at about 235 °C (the cluster T_g). It was also found that with increasing ion content up to about 37 mol %, the matrix T_g shifted to higher temperatures and the size of tan δ peak decreased. The cluster T_g did not change. From the results, it is suggested that even at high ion content, the ionomers contain a significant amount of unclustered material, but that the increase in the ion content does not increase the amount of clustered material. SAXS profiles showed the ionic peak, which represents the presence of multiplets in the cluster regions. In addition, the difference in the matrix and cluster T_g's of this ionomer system was found to be about 35°. Thus, it is postulated that ionic group aggregation is subject to steric hindrance owing to the bulkiness of benzene ring, and tension on polymer chains surrounding the multiplet owing to chain rigidity, which limit the size and stability of the multiplet significantly. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 3226–3232, 1999     

Segmental and secondary dynamics in hydrogen‐bonded poly(4‐vinylphenol)/poly(methyl methacrylate) blends

Broadband dielectric spectroscopy was used to study the segmental (α) and secondary (β) relaxations in hydrogen‐bonded poly(4‐vinylphenol)/poly(methyl methacrylate) (PVPh/PMMA) blends with PVPh concentrations of 20–80% and at temperatures from ?30 to approximately glass‐transition temperature (T_g) + 80 °C. Miscible blends were obtained by solution casting from methyl ethyl ketone solution, as confirmed by single differential scanning calorimetry T_g and single segmental relaxation process for each blend. The β relaxation of PMMA maintains similar characteristics in blends with PVPh, compared with neat PMMA. Its relaxation time and activation energy are nearly the same in all blends. Furthermore, the dielectric relaxation strength of PMMA β process in the blends is proportional to the concentration of PMMA, suggesting that blending and intermolecular hydrogen bonding do not modify the local intramolecular motion. The α process, however, represents the segmental motions of both components and becomes slower with increasing PVPh concentration because of the higher T_g. This leads to well‐defined α and β relaxations in the blends above the corresponding T_g, which cannot be reliably resolved in neat PMMA without ambiguous curve deconvolution. The PMMA β process still follows an Arrhenius temperature dependence above T_g, but with an activation energy larger than that observed below T_g because of increased relaxation amplitude. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3405–3415, 2004     

Pressure‐volume‐temperature and glass transition behavior of silica/polystyrene nanocomposite

The pressure‐volume‐temperature (PVT) behavior and glass transition behavior of a 10 wt % silica nanoparticle‐filled polystyrene (PS) nanocomposite sample are measured using a custom‐built pressurizable dilatometer. The PVT data are fitted to the Tait equation in both liquid and glassy states; the coefficient of thermal expansion α, bulk modulus K, and thermal pressure coefficient γ are examined as a function of pressure and compared to the values of neat PS. The glass transition temperature (T_g) is reported as a function of pressure, and the limiting fictive temperature (T_f′) from calorimetric measurements is reported as a function of cooling rate. Comparison with data for neat PS indicates that the nanocomposite has a slightly higher T_g at elevated pressures, higher bulk moduli at all pressures studied, and its relaxation dynamics are more sensitive to volume. The results for the glassy γ values suggest that thermal residual stresses would not be reduced for the nanocomposite sample studied. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1131–1138     

Polymer segmental dynamics and solvent thermal transitions in poly(ethyl acrylate)/p‐xylene mixtures

A poly(ethyl acrylate) polymer network was swollen with different concentrations of the nonpolar solvent p‐xylene, c_px, from xerogel until saturation (0 ≤ c_px ≤ 0.85). Differential scanning calorimetry (DSC) and thermally stimulated depolarization currents (TSDC) techniques were employed to study the polymer segmental dynamics and the solvent thermal transitions in homogeneous (c_px < 0.20) and partially crystallized (c_px ≥ 0.20) PEA/p‐xylene mixtures. Our DSC measurements indicate that p‐xylene undergoes cold crystallization for intermediate solvent concentrations, 0.20 ≤ c_px ≤ 0.30 while for higher c_px values crystallization takes place during cooling. The results show that for c_px ≤ 0.30 the T_g decreases with increasing c_px (plasticization effect) obeying the respective Fox equation. For the same c_px range we found that both the dielectric strength and the heat capacity increment of the segmental (α) relaxation process increase gradually with c_px whereas the distribution of relaxation times for the underlying molecular relaxations does not change. For c_px > 0.30 the partially crystallized mixtures exhibit a constant T_g corresponding to the gel phase of PEA with an amount of p‐xylene which is not able to crystallize under any conditions. The concentration of this noncrystallized p‐xylene, c_UCpx, has been estimated to be between 0.12 and 0.15, independent of the total p‐xylene concentration in the mixtures. When a separate p‐xylene crystal phase is formed (for c_px > 0.30) the segmental dielectric strength and heat capacity increment decrease significantly exhibiting values significantly lower than those measured for the homogeneous gels. In addition, we found that the presence of p‐xylene crystals may induce marginal spatial heterogeneity of polymer (or p‐xylene) concentration within the gel phase affecting thus slightly the breath of the segmental relaxation of PEA. We attribute these results to restrictions of polymer segmental configurations due to constraints imposed by the p‐xylene crystals and/or to the immobilization of a part of the polymer chains. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Microphase separation and ion‐conduction mechanisms in polypropylene oxide/lithium perchlorate (LiClO4) complexes

Broadband dielectric spectroscopy was used to examine ion‐conduction mechanisms in polypropylene oxide (PPO) with a molecular weight of 4000 complexed with LiClO₄. Two distinct conduction mechanisms were proposed with respect to high and low salt concentration regions. In a concentrated regime (Li/O >10%), the segmental motion of PPO molecules is significantly slowed down by enhanced cation coordination that results in a marked decrease in molar conductivity. We found a linear relationship between the ionic diffusion coefficient and the relaxation frequency of slowed segmental motion over broad temperature and salt‐concentration ranges. The use of a random walk scheme revealed that ions hop around at the same rate as slowed segmental motion for a monomer length. In a dilute regime (Li/O <0.1%), ions are temporarily localized in a limited domain. The direct current conductivity is achieved by structural renewal that releases ions from such localization and provides a diffusional character. At intermediate salt concentrations, microphase separation into ion‐depleted and ion‐rich regions was evidenced by the coexistence of fast and slow segmental processes. The molar conductivity revealed a maximum at Li/O = 3%. Its decrease at higher salt concentrations was attributed to the slowing down of segmental motion, and that at lower salt concentrations was attributed to localization of ionic motion. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 613–622, 2002; DOI 10.1002/polb.10123     

ION CONDUCTION IN COMPLEX OF ACRYLONITRILE-COPOLYMERIZED COMB POLYETHER WITH LITHIUM PERCHLORATE

Poly (oligoether methacrylate-co-acrylonitrile) s, P (MEOn- AN), with oligoether pendants of different lengths were synthesized and the ion conduction property of their Li-salt complexes was studied as the function of polymer structure. At proper copolymer composition, lithium concentration and pendant length, the ion conductivity reaches 7.0×10~(-5)S/cm at ambient temperature, together with improved mechanical strength. The ion transport in the polymer media is assisted by segmental relaxation, which is confirmed both by the consistency between ion conductivity and T_g and by the study of TSC.     

Polymer electrolyte membranes by in situ polymerization of poly(ethylene carbonate‐co‐ethylene oxide) macromonomers in blends with poly(vinylidene fluoride‐co‐hexafluoropropylene)

Salt‐containing membranes based on polymethacrylates having poly(ethylene carbonate‐co‐ethylene oxide) side chains, as well as their blends with poly(vinylidene fluoride‐co‐hexafluoropropylene) (PVDF‐HFP), have been studied. Self‐supportive ion conductive membranes were prepared by casting films of methacrylate functional poly(ethylene carbonate‐co‐ethylene oxide) macromonomers containing lithium bis(trifluorosulfonyl)imide (LiTFSI) salt, followed by irradiation with UV‐light to polymerize the methacrylate units in situ. Homogenous electrolyte membranes based on the polymerized macromonomers showed a conductivity of 6.3 × 10^?6 S cm^?1 at 20 °C. The preparation of polymer blends, by the addition of PVDF‐HFP to the electrolytes, was found to greatly improve the mechanical properties. However, the addition led to an increase of the glass transition temperature (T_g) of the ion conductive phase by ～5 °C. The conductivity of the blend membranes was thus lower in relation to the corresponding homogeneous polymer electrolytes, and 2.5 × 10^?6 S cm^?1 was recorded for a membrane containing 10 wt % PVDF‐HFP at 20 °C. Increasing the salt concentration in the blend membranes was found to increase the T_g of the ion conductive component and decrease the propensity for the crystallization of the PVDF‐HFP component. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 79–90, 2007     

Molecular composites made of ionic poly(p‐phenylene terephthalamide) and poly(4‐vinylpyridine): Relaxation behavior

Molecular composites were prepared from several types of ionically modified, poly(p‐phenylene terephthalamide) (PPTA) dispersed in a poly(4‐vinylpyridine) matrix. Optical clarity tests indicated that the component polymers of the composite were miscible, at least at low concentrations of the rodlike reinforcement. In composites containing ionic PPTA, where ionic sulfonate groups were attached as side groups either to PPTA chains or to PPTA anion chains, the glass‐transition temperature (T_g) was increased by l0 °C or more, at 5 wt % reinforcement. At concentrations of 10–15 wt % of the ionic polymer, T_g values leveled off or decreased slightly. This suggested that some aggregation of the rigid‐rod molecules occurred. In composites containing ionic PPTA, where the ionic sulfonate groups were directly attached to the phenylene rings of PPTA chains, not only was T_g shifted significantly to higher temperatures, but the rubbery plateau modulus retained high values up to temperatures of 250 °C or above. Observed effects were considered to be the result of strong ionic interactions between the ionic reinforcement polymer and the polar matrix polymer. The possible effects of the counterion on T_g and the storage modulus are discussed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1110–1117, 2002     

Dependence of methanol permeability on the nature of water and the morphology of graft copolymer proton exchange membranes

Novel polymers with controlled microstructures were prepared and studied to further advance the understanding of structure–property relationships of proton conducting membranes. PAN‐g‐macPSSA membranes, which contained poly(styrenesulfonic acid) (PSSA) grafts of defined graft length, are compared with PVDF‐g‐PSSA membranes, prepared by radiation‐grafting, and Nafion® 117. The intrinsic properties of PAN‐g‐macPSSA membranes are insensitive to the macromonomer graft length but are highly dependent on the ion exchange capacities (IEC). Increasing the IEC increases the content of free water absorbed by the membrane. Self‐diffusion coefficients of water in water‐swollen PAN‐g‐macPSSA were found to be similar to that of N117, despite PAN‐g‐macPSSA's higher water content. Of the polymers studied, PAN‐g‐macPSSA exhibited the lowest methanol permeability, which is explained on the basis of it containing a more tortuous ionic network. Methanol permeability decreased with decreasing volume of free water. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2240–2252, 2006     

Effects of Na‐sulfopropyl groups on the mechanical properties and morphology of polystyrene‐co‐methacrylate ionomers

The dynamic mechanical properties and morphology of poly(styrene‐co?3‐sulfopropyl sodium‐methacrylate) SSPMANa ionomers were investigated. It was found the increasing rate of ionic moduli of the SSPMANa ionomer was very low, and the cluster T_g of the ionomers remained more or less constant with increasing ion content. A well‐developed SAXS peak was seen for low ion content SSPMANa ionomers and the peak position changed slightly with ion content. Thus, it was suggested that the presence of the alkyl ester side chains made the ion pairs form multiplets more easily at their prevalent distances, and the small‐agglomerated multiplets were dispersed in the polymer matrix relatively evenly. The interpretation of ionic moduli using a number of theories implied that the multiplets and clusters acted as effective crosslinks and filler particles, respectively, and the size and shape of the clusters were irregular. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1043–1053     

DABCO‐functionalized polysulfones as anion‐exchange membranes for fuel cell applications: Effect of crosslinking

A series of DABCO‐functionalized polysulfones were synthesized and characterized. The effect that crosslinking has on the membrane properties containing different degrees of functionalization was evaluated. These polymers showed good thermal stability below the fuel cell operation temperature, T < 100 °C, reflected by the T_OD, T_FD, and thermal durability. The water uptake increased as the percentage of DABCO groups increased and the crosslinked membranes showed lower capacity to absorb water than the non‐crosslinked ones favoring thus the dimensional stability of the first ones. Membranes in the chloride form containing low degree of functionalization exhibited the highest tensile strength values. The ionic conductivity of non‐crosslinked membranes varied as a function of the functionalization degree until a value of around 100% achieving a maximum value at 86%. However, the crosslinked ones showed satisfactory ionic conductivities for values higher than 100%. The behavior of these polymeric materials in alkaline solutions revealed a great alkaline stability necessary to be used as solid electrolytes in fuel cells. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1326–1336