LDPE/EVA/graphene nanocomposites with enhanced mechanical and gas permeability properties

In the present work, graphene oxide (GO) and reduced graphene oxide (RGO) were incorporated at low‐density polyethylene (LDPE)/ethylene vinyl acetate (EVA) copolymer blend using solution casting method. Monolayer GO with 1‐nm thickness and good transparency was synthesized using the well‐known Hummers's method. Fourier transform infrared and X‐ray photoelectron spectroscopy data exhibited efficient reduction of GO with almost high C/O ratio of RGO. Scanning electron microscopy showed the well distribution of GO and RGO within LDPE/EVA polymer matrix. The integrating effects of GO and RGO on mechanical and gas permeability of prepared films were examined. Young's modulus of nanocomposites are improved 65% and 92% by adding 7 wt% of GO and RGO, respectively. The tensile measurements showed that maximum tensile strength emerged in 3 wt% of loading for RGO and 5 wt% for GO. The measured oxygen and carbon dioxide permeability represented noticeably the attenuation of gas permeability in composite films compared with pristine LDPE/EVA blend. Copyright © 2015 John Wiley & Sons, Ltd.     

Structure and gas permeability of asymmetric polyimide membranes made by dry–wet phase inversion: Influence of alcohol as casting solution

In this article, we have reported the influence of alcohol as a casting solution on the structure and the gas permeability of asymmetric polyimide membranes made by dry–wet phase inversion. The apparent skin layer thickness of the asymmetric membrane decreased with an increase in molecular weight of the alcohol, and the thicknesses of the membranes made from methanol, ethanol, propanol, and butanol were 250, 120, 61, and 31 nm, respectively. We found that χ₁₂ as an interaction parameter of solvent–nonsolvent had a significant influence on the phase inversion occurring in the coagulant medium. On the other hand, the gas permeance and the gas selectivity in the asymmetric membranes increased with the increasing molecular weight of the alcohol. We believe that a more packed structure formed in the asymmetric polyimide membrane with a thinner surface skin layer is also responsible for the thickness‐dependence of the gas selectivity obtained in this study. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2739–2746, 2007     

Effect of ultraviolet light irradiation on gas permeability in polyimide membranes. 1. Irradiation with low pressure mercury lamp on photosensitive and nonphotosensitive membranes

Two types of polyimide membranes; one crosslinkable and the other noncrosslinkable using ultraviolet light irradiation (UV irradiation), were prepared and investigated concerning the effect of UV irradiation on their gas permeabilities and selectivities. Permeability and diffusion coefficients for O₂, N₂, H₂, and CO₂ were determined using the vacuum pressure and time lag method. Sorption properties for carbon dioxide were carried out to evaluate the changes in the free volume in the membranes due to the irradiation. In both membranes, permeability coefficients for all gases used in this study decreased and permselectivity, particularly for H₂ over N₂, increased with increasing UV irradiation time without a significant decrease in the flux of H₂. The coefficients depended on the membrane thickness, suggesting asymmetrical changes in both membranes due to UV irradiation. It was suggested by an attenuated total reflection (ATR) FTIR method and analysis of the gas sorption properties of the membranes that the physical changes due to UV irradiation at the irradiated side in both membranes significantly affected their gas permeation properties compared with the chemical changes, especially the crosslinking in the crosslinkable type. © 1997 John Wiley & Sons, Inc. J. Polym Sci B: Polym Phys 35: 2259–2269, 1997     

Nanocomposites of polyurethane with various organoclays: Thermomechanical properties,morphology, and gas permeability*

The properties of polyurethane (PU) nanocomposites with three different organoclays were compared in terms of their thermal stabilities, mechanical properties, morphologies, and gas permeabilities. Hexadecylamine–montmorillonite, dodecyltrimethyl ammonium–montmorillonite, and Cloisite 25A were used as organoclays for making PU hybrid films. The properties were examined as a function of the organoclay content in a matrix polymer. Transmission electron microscopy photographs showed that most clay layers were dispersed homogeneously into the matrix polymer on the nanoscale, although some particles of clay were agglomerated. Moreover, the addition of only a small amount of organoclay was enough to improve the thermal stabilities and mechanical properties of PU hybrid films, whereas gas permeability was reduced. Even polymers with low organoclay contents (3–4 wt %) showed much higher strength and modulus values than pure PU. Gas permeability was reduced linearly with an increasing amount of organoclay in the PU matrix. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 670–677, 2002; DOI 10.1002/polb.10124     

Poly(lactic acid) nanocomposites with various organoclays. I. Thermomechanical properties,morphology, and gas permeability

The thermomechanical properties, morphology, and gas permeability of hybrids prepared with three types of organoclays were compared in detail. Hexadecylamine–montmorillonite (C₁₆–MMT), dodecyltrimethyl ammonium bromide–montmorillonite (DTA‐MMT), and Cloisite 25A were used as organoclays in the preparation of nanocomposites. From morphological studies using transmission electron microscopy, most clay layers were found to be dispersed homogeneously in the matrix polymer, although some clusters or agglomerated particles were also detected. The initial degradation temperature (at a 2% weight loss) of the poly(lactic acid) (PLA) hybrid films with C₁₆–MMT and Cloisite 25A decreased linearly with an increasing amount of organoclay. For hybrid films, the tensile properties initially increased but then decreased with the introduction of more of the inorganic phase. The O₂ permeability values for all the hybrids for clay loadings up to 10 wt % were less than half the corresponding values for pure PLA, regardless of the organoclay. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 94–103, 2003     

Gas permeability and stability of poly(1-trimethylsilyl-1-propyne-co-1-phenyl-1-propyne) membranes

A significant reduction in the gas permeability of the poly(1-trimethylsilyl-1-propyne) (PMSP) membrane was investigated in terms of the membrane thickness and the storage environment. The effects of physical aging were observed with thinner membranes and under vacuum conditions compared with storage in air. The decrease in the permeability coefficient was dependent on the decrease in the hole saturation constant of Langmuir adsorption (C'_H), which is related to the volume of the microvoids. Physical aging in the PMSP membrane affected not only the glassy domain but also the rubbery one. To stabilize the permeability of the PMSP membrane, a poly(1-trimethylsilyl-1-propyne-co-1-phenyl-1-propyne) [poly(TMSP-co-PP)] membrane was prepared. Poly(TMSP-co-PP) has the same unit of poly(1-phenyl-1-propyne), which membrane has stable permeability. The poly(TMSP-co-PP) with less than 20 mol % PP content was estimated to be a random copolymer based on theoretical gas permeation analysis. In the poly(TMSP-co-PP) membrane, the relation between the PP content and C'_H was similar to the relation between the PP content and the gas permeability. The stability of the permeability was dependent on the PP content. The poly(TMSP-co-PP) membrane containing 10 mol % PP had both high permeability and good stability under some of the aging conditions performed in this work. © 1995 John Wiley & Sons, Inc.     

Synthesis,properties, and gas permeability of novel poly(diarylacetylene) derivatives

Poly(diphenylacetylene)s having various silyl groups are soluble in common solvents, from whose membranes poly(diphenylacetylene) membranes can be obtained by desilylation. The oxygen permeability coefficients of the desilylated polymers are quite different from one another (120–3300 barrers) irrespective of the same polymer structure. When bulkier silyl groups are removed, the oxygen permeability increases to larger extents. Poly[1-aryl-2-p-(trimethylsilyl)phenylacetylene]s are soluble in common solvents, and afford free-standing membranes. These Si-containing polymer membranes are desilylated to give the membranes of poly[1-aryl-2-phenylacetylene]s. Both of the starting and desilylated polymers show very high thermal stability and high gas permeability. 1-Phenyl-2-p-(t-butyldimethylsiloxy)phenylacetylene polymerizes into a high-molecular-weight polymer. This polymer is soluble in common organic solvents to provide a free-standing membrane. Desilylation of this membrane yields a poly(diphenylacetylene) having free hydroxyl groups, which is the first example of a highly polar group-carrying poly(diphenylacetylene). The P/P and P/P permselectivity ratios of poly(1-phenyl-2-p-hydroxylphenylacetylene) membrane are as large as 47.8 and 45.8, respectively, while keeping relatively high P of 110 barrers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5028–5038, 2006     

Synthesis,characterization, and evaluation of novel polyhydantoins as gas separation membranes

Novel polyhydantoins ( PHYs ) were synthesized from original aromatic diisocyanates and bisiminoacetates by a two‐step polycondensation procedure, which involved the cyclization of polyurea intermediates promoted by acid catalysis. The physical properties of the novel PHYs were evaluated by comparing them with a classical PHY derived from 4,4′‐methylenediphenyl diisocyanate. All PHYs were soluble and could be processed into dense films, which showed good mechanical properties (tensile strength up to 110 MPa) and thermal stability of >400 °C. High glass transition temperatures (T_gs), ranging from 260 to 410 °C, were observed. Fractional free volume (FFV) was strongly dependent on the chemical structure, and a linear correlation between gas permeability and FFV of PHYs could be found. The gas separation properties were comparable to those of the commercial polyimide Matrimid^®, with the exception of one of the PHYs which exhibited very promising properties as its gas productivity was comparable to the gas separation performance of well‐established experimental polyimides. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4052–4060     

Study of the interaction between cyclodextrins and liposome membranes: effect on the permeability of liposomes

We wanted to compare and understand the effect of the most currently used cyclodextrins on a model membrane. We studied the influence of most currently used cyclodextrins on the release of a fluorescent marker encapsulated in the inner cavity of SUV liposomes. It was shown that the observed effect on calcein release can be directly related to the affinity of cyclodextrins for both lipid components of liposomes, cholesterol and phosphatidylcholine. From this relationship, we were able to determine, for each cyclodextrin, a theoretical concentration giving rise to 50% or 100% calcein release. This theoretical concentration was confirmed experimentally.     

Improvement in gas permeability of biaxially stretched PET films blended with high barrier polymers: The role of chemistry and processing conditions

Improvement in oxygen gas barrier properties of polyester/polyamide blends used in packaging industry is the main objective of the present study. For this purpose poly(ethylene terephthalate) (PET)/poly(m-xylene adipamide) (nylon-MXD6) (95/5 w/w) and poly(ethylene terephthalate-co-isophthalate) copolymer (PETI)/MXD6 (95/5 w/w) blends have been prepared with a PET copolymer which consists of 5 wt.% sodium sulfonated isophthalate (PET-co-5SIPA) as compatibilizer and a carboxyl-terminated polybutadiene (CTPB) as filler by using a co-rotating intermeshing twin screw extruder. The effects of chemical architecture and morphology on oxygen gas permeability and processability were analyzed by using a range of characterization techniques including differential scanning calorimetry (DSC), scanning electron microscopy (SEM), oxygen gas permeability analyzer, and a special computer controlled uniaxial stretching system that provides real-time measurement of true stress, true strain and birefringence. The morphological analysis revealed that PET-co-5SIPA was an effective compatibilizer for both PET/MXD6 and PETI/MXD6 blends. DSC analysis and spectral-birefringence technique were used to understand the thermal and stress-induced crystallization behavior of the blends. Morphological analysis of the films after biaxial stretching indicated that the spherical nylon phase was converted to 75 nm thick disks during stretching (aspect ratio L/W = 6) that creates a tortuous pathway for oxygen ingress. Stretching enhanced the barrier properties of PET/MXD6 and PETI/MXD6 blends.     

Improving the gas barrier,mechanical and thermal properties of poly(vinyl alcohol) with molybdenum disulfide nanosheets

New multifunctional materials with both high structural and gas barrier performances are important for a range of applications. Herein we present a one‐step mechanochemical process to prepare molybdenum disulfide (MoS₂) nanosheets with hydroxy functional groups that can simultaneously improve mechanical strength, thermal conductivity, and gas permittivity of a polymer composite. By homogeneously incorporating these functionalized MoS₂ nanosheets at low loading of less than 1 vol %, a poly(vinyl alcohol) (PVA) polymer exhibits elongation at break of 154%, toughness of 82 MJ/m³, and in‐plane thermal conductivity of 2.31 W/m K. Furthermore, this composite exhibits significant gas barrier performance, reducing the permeability of helium by 95%. Under fire condition, the MoS₂ nanosheets form thermally stable char, thus enhancing the material's resistance to fire. Hydrogen bonding has been identified as the main interaction mechanism between the nanofillers and the polymer matrix. The present results suggest that the PVA composite reinforced with 2D layered nanomaterial offers great potentials in packaging and fire retardant applications. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 406–414     

Test methods for the characterization of gas and vapor permeability in polymers for food packaging application: A review

The assessment of the transport properties of different substances in polymeric materials is of crucial importance for the evaluation of packaging performances, aiming to protect packed food products and ensure a prolonged shelf-life. The most relevant substances for such application can be identified in O₂, CO₂ and C₂H₄ (together with N₂ as control) as permanent gases, and water vapor as condensable species. All these penetrants are able to alter significantly food properties, in term of sensory characteristics, textures, and quality in general. All relevant techniques for the experimental characterization of mass transport properties in polymeric films or packages are critically reviewed, focusing in detail on standard methods. Each technique is briefly presented in terms of apparatus requirements and general procedures, followed by a discussion on its main features.     

Thermal oxidative stability and effect of water on gas transport and mechanical properties in PA6‐EVOH films

The thermal oxidative stability and the effect of water on gas transport and mechanical properties of blends of polyamide 6 (PA6) with ethylene‐co‐vinyl alcohol (EVOH) and EVOH modified with carboxyl groups (EVOH‐COOH) have been investigated. The presence of EVOH reduces water vapor and oxygen gas permeability of polyamide, as well as small amounts of EVOH‐COOH further improve barrier properties, especially to oxygen. This has been explained in terms of improved interactions of the blend constituents in the amorphous phase, due to ionic linkages between the polyamide amino groups and the carboxyls of modified EVOH. The permeation to gases was found to increase with the amount of sorbed water. The morphology of the samples was found to have an effect on barrier properties, as the presence of EVOH causes the PA6 α crystalline form to increase, lowering the permeability to oxygen and water vapor. Mechanical properties are strongly affected by water sorption, as tensile modulus and strength decrease with increasing water content. Chemiluminescence (CL), infrared spectroscopy (FTIR), and tensile test were employed in order to assess the correlation between chemical composition and the thermal oxidative stability of the films aged at 110 °C in air. CL experiments suggest that the presence of EVOH and EVOH‐COOH efficiently inhibits the formation of peroxidized species during the processing, and increases the thermal oxidative stability of the films. Infrared spectroscopy showed a build‐up of carbonyl absorption in the range 1700–1780 cm^?1, due to the formation of oxidation products, which is greater in the case of the pure polymer. Tensile tests on films revealed a reduction in ductility as a result of ageing for neat PA6, whereas in comparison the blends exhibit a far better long‐term stability. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 840–849, 2007     

The preparation of novel silica modified polyimide membranes: synthesis,characterization, and gas separation properties

In this study, new monomers having siloxane groups were synthesized as an intermediate for preparation of siloxane modified polyimide polymers. Then with these monomers, the synthesis of uncrosslinked and crosslinked polyimide–siloxane hybrid polymer membranes were achieved. The purposes of the preparation of modified polyimides were to modify the thermal and chemical stability, and mechanical strength of polyimides, and to improve the gas separation properties of polymers. The new diamine monomer having siloxane groups was prepared from 3,5‐diaminobenzoic acid (3,5‐DABA) and 3‐aminopropyltrimethoxysilane (3‐APTMS) in N‐methyl‐2‐pyrollidone (NMP) at 180°C. The modified polyimide membranes having different amount of siloxane groups were synthesized from pyromellitic dianhydride (PMDA), 4,4‐oxydianiline (ODA), and 3,5‐diaminobenzamido‐N‐propyltrimethoxy silane (DABA/PTMS) in NMP using a two‐step thermal imidization process. The synthesis of modified polyimide membranes were characterized by Fourier transform infrared spectroscopy (FTIR). The thermal analysis of the polyimides were carried out by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Water absorption and swelling experiments were also carried out for the investigation of structural properties of polymers. FTIR observations confirmed that the polyimide membranes with new diamine intermediate were successfully obtained. Thermal analysis showed that the uncrosslinked copolyimides exhibited two glass transition temperatures, indicating that they were separated microphases and it was found that all the modified copolyimides had showed higher glass transition temperature (T_g) than unmodified polyimides. The separation properties of the prepared polyimide membranes were also characterized by permeability for O₂ and N₂ gases and ideal selectivity values were calculated. Copyright © 2009 John Wiley & Sons, Ltd.     

Relationship between the polymer/silica interaction and properties of silica composite materials

Cast film composites have been prepared from aqueous polymer solutions containing nanometric silica particles. The polymers were polyvinyl alcohol (PVA), hydroxypropylmethylcellulose (HPMC) and a blend of PVA‐HPMC polymers. In the aqueous dispersions, the polymer–silica interactions were studied through adsorption isotherms. These experiments indicated that HPMC has a high affinity for silica surfaces, and can adsorb at high coverage; conversely, low affinity and low coverage were found in the case of PVA. In the films, the organization of silica particles was investigated through transmission electron microscopy (TEM) and small‐angle neutron scattering (SANS). Both methods showed that the silica particles were well‐dispersed in the HPMC films and aggregated in the PVA films. The mechanical properties of the composite films were evaluated using tensile strength measurements. Both polymers were solid materials, with a high‐elastic modulus (65 MPa for HPMC and 291 for PVA) and a low‐maximum elongation at break (0.15 mm for HPMC and 4.12 mm for PVA). In HPMC films, the presence of silica particles led to an increase in the modulus and a decrease in the stress at break. In PVA films, the modulus decreased but the stress at break increased upon adding silica. Accordingly, the polymer/silica interaction can be used to tune the mechanical properties of such composite films. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1134–1146, 2006     

Partially pyrolyzed poly(dimethylsiloxane)‐based networks: Thermal characterization and evaluation of the gas permeability

In this investigation, the preparation and characterization of partially pyrolyzed membranes based on poly(dimethylsiloxane) (PDMS) are described. These membranes were obtained by the crosslinking of silanol‐terminated PDMS with multifunctional nanoclusters derived from the reaction of pentaerythritoltriacrylate with 2‐aminoethyl‐3‐aminopropyltrimethoxysilane and the in situ polycondensation of tetraethylortosilicate, followed by the thermal treatment of the resulting membranes at different temperatures. The partially pyrolyzed membranes were characterized with infrared spectroscopy, thermogravimetry, elemental analyses, dynamic mechanical analysis, small‐angle X‐ray scattering, and scanning electron microscopy. The membranes exhibited improvements in the thermal stability and mechanical strength. Even with distinct compositions with respect to the Si/O and Si/C ratios, the flexibility of these materials was maintained. The flux rates of the gases through the membranes were measured for N₂, H₂, O₂, CH₄, and CO₂, at 25 °C. The permeability of the membranes changed with increases in the pyrolysis and oxidation temperatures. These membranes could be described as PDMS chains separated by inorganic clusters. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 299–309, 2007.     

Investigation on the coacervation of fish scale gelatin hydrogel with seafood waste hydrolysates for the development of artificial fish bait: Physico-chemical,thermodynamic, and morpho-structural properties

The study dealt with the development of biopolymer based hydrogel artificial fish bait with hydrolysates derived from fish processing wastes. Fish scale gelatin (FSG) was used for the development of a hydrogel to which bioattractants extracted from seafood processing wastes of fish, squid and shrimp were added to prepare composite gels such as FSG-FH, FSG-SH and FSG-SPH, respectively. To understand the homogenesity and cross linking complexation of composite gels, the study aimed at investigating physico-chemical, thermodynamic, molecular and structural properties were analysed. The gel strength, melting point and thermal stability of the composite hydrogels were found to decrease marginally compared to the control gel, FSG. It could be understood that the crystalline structure at 2θ = 23° of the FSG-SH, and FSG-FH were not much altered compared to FSG gel. However, alteration in the crystalline structure in FSG-SPH was evident at 2θ = 27.3°. The TGA and DSC analysis revealed the reduction in the thermal stability of FSG on the addition of protein hydrolysates in the process of coacervation to get hydrogel based fish bait. Further, FESEM and AFM analysis indicated FSG-SH as the composite hydrogel with most compact and smooth surface was evident by Ra and Rq values. Among the composite gels, FSG-SH was found to have higher hydrophobicity due to enhanced gel structure. FTIR spectra of FSG and composite gels exhibitted similarity corresponding to amide-A, B, I, II and III bands. However, NMR analysis revealed the existence of notable difference with respect to chemical shift in the range of 7.0–7.75 ppm expressing the presence of aromatic protons of the amino acid phe and N–H protons of amide in all the composite gels. Further, NMR analysis confirmed the role of imino acids (δ CH₂ & β CH₂ protons) and hydrophobic amino acids (α-CH₂ protons) in decrease the physical and thermal properties of the composite gels. The addition of protein hydrolysates with FSG was found to decrease the physical, thermal and structural properties, however improve the aromatic compounds of the composite gels.     

Synthesis of poly(vinyl ether)‐based,ABA triblock‐type thermoplastic elastomers with functionalized soft segments and their gas permeability

The ABA‐type triblock copolymers consisting of poly(2‐adamantyl vinyl ether) [poly(2‐AdVE)] as outer hard segments and poly(6‐acetoxyhexyl vinyl ether) [poly(AcHVE)], poly(6‐hydroxyhexyl vinyl ether) [poly(HHVE)], or poly(2‐(2‐methoxyethoxy)ethyl vinyl ether) [poly(MOEOVE)] as inner soft segments were synthesized by sequential living cationic polymerization. Despite the presence of polar functional groups such as ester, hydroxyl, and oxyethylene units in their soft segments, the block copolymers formed elastomeric films. The thermal and mechanical properties and morphology of the block copolymers showed that the two polymer segments of these triblock copolymers were segregated into microphase‐separated structure. Effect of the functional groups in the soft segments on gas permeability was investigated as one of the characteristics of the new functional thermoplastic elastomers composed solely of poly(vinyl ether) backbones. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1114–1124     

Stabilisation of the water permeability of mineral ultrafiltration membranes: An empirical modelling of surface and pore hydration

This work focuses on the study of the hydration phenomenon operating in Na–mordenite membranes during the conditioning step (stabilisation of filtration properties). First, experimental (filtration of pure water) tests are carried out immediately after putting the membrane in its casing and until the stabilization of the membrane permeation flux. The evolution of the hydraulic permeability shows that there are two separate steps during the conditioning of the membrane. A numerical approximation of the hydraulic permeability during the conditioning step was carried out. The first part of the equation expresses a fast decrease in the membrane's permeability during the beginning of the conditioning step (several hours). This behaviour is attributed to a surface hydration of the membrane and also to a modification of the crystalline framework. The second one is a slower phenomenon that takes place until the end of the conditioning step. It is attributed to the (intra-crystalline) hydration of micropores.