Dynamic light scattering and rheology studies of aqueous solutions of amphiphilic sodium maleate containing copolymers

Light scattering techniques, video particle‐tracking microrheology, and bulk rheology were employed to examine the structure and dynamics of a series of alternating sodium maleate copolymers with moderately hydrophobic comonomers (diisobutylene, styrene, and isobutylene) in aqueous solutions. The scaling dependence of the specific viscosity (η_sp) on the polyelectrolyte concentration (c) was studied with and without added salt; similar trends were found in both conventional rheology and particle‐tracking microrheology measurements, showing good performance of the technique with flexible polyelectrolytes. Furthermore, with dynamic light scattering performed in high added salt conditions, we examined the behavior of the amplitude of the fast mode, which is in agreement with scaling predictions. In contrast, the slow modes are not understood and display three separate behaviors for the wavevector q dependence of the decay rate (Γ), depending on the comonomer; superdiffusive (Γ ～ q^2.7, isobutylene) possibly because of sticky aggregates, wavevector independent (Γ ～ q⁰, styrene) most likely because of coupled polyion‐ion diffusion and diffusive (Γ ～ q^2.0, diisobutylene) presumably because these aggregates are not sticky. The hydrophobicity of the comonomer appears to switch the aggregation process between “open,” “closed,” and “non” association for isobutylene, diisobutylene, and styrene respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 774–785, 2007     

Synthesis and aqueous solution properties of hydrophobically modified anionic acrylamide copolymers

In this investigation, hydrophobically modified polyacrylamide with low amounts of anionic long‐chain alkyl was synthesized by the free radical polymerization in deionized water. This water‐soluble copolymerization method is more convenient compared with the traditional micellar copolymerization methods. The copolymers were characterized using Fourier transform infrared, ¹H NMR, and the molecular weight and polydispersity were determined using gel permeation chromatography. The solution behavior of the copolymers was studied as a function of composition, pH, and added electrolytes. As NaCl was added to solutions of AM/C₁₁AM copolymers or pH was lowered, the shielding or elimination of electrostatic repulsions between carboxylate groups of the C₁₁AM unit lead to coil shrinkage. The steady shear viscosity and dynamic shear viscoelastic properties in semidilute, salt‐free aqueous solutions were conducted to examine the concentration effects on copolymers. In addition, the shear superimposed oscillation technique was used to probe the structural changes of the network under various stresses or shear conditions. We prepared hydrophobically modified polyacrylamide with N‐alkyl groups in the aqueous medium. The advantage of this method is that the production is pure without surfactants. These results suggest that the unique aqueous solution behavior of the copolymers is different from conventional hydrophobically associating acrylamide. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2465–2474, 2008     

Rheological properties of multisticker associative polyelectrolytes in semidilute aqueous solutions

Multisticker associative polyelectrolytes of acrylamide (≈86 mol %) and sodium 2‐acrylamido‐2‐methylpropanesulfonate (≈12 mol %), hydrophobically modified with N,N‐dihexylacrylamide groups (≈2 mol %), were prepared with a micellar radical polymerization technique. This process led to multiblock polymers in which the length of the hydrophobic blocks could be controlled through variations in the surfactant‐to‐hydrophobe molar ratio, that is, the number of hydrophobes per micelle (N_H). The rheological behavior of aqueous solutions of polymers with the same molecular weight and the same composition but with two different hydrophobic block lengths (N_H = 7 or 3 monomer units per block) was investigated as a function of the polymer concentration with steady‐flow, creep, and oscillatory experiments. The critical concentration at the onset of the viscosity enhancement decreased as the length of the hydrophobic segments in the polymers increased. Also, an increase in the N_H value significantly enhanced the thickening ability of the polymers and affected the structure of the transient network. In the semidilute unentangled regime, the behavior of the polymer with long hydrophobic segments (N_H = 7) was studied in detail. The results were well explained by the sticky Rouse theory of associative polymer dynamics. Finally, the viscosity decreased with an increase in the temperature, mainly because of a lowering of the sample relaxation time. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1640–1655, 2004     

pH‐responsive ampholytic terpolymers of acrylamide,sodium 3‐acrylamido‐3‐methylbutanoate,and (3‐acrylamidopropyl)trimethylammonium chloride. II. Solution properties

The solution properties of low‐charge‐density ampholytic terpolymers of acrylamide, sodium 3‐acrylamido‐3‐methylbutanoate, and (3‐acrylamidopropyl)trimethylammonium chloride were studied as functions of the solution pH, ionic strength, and polymer concentration. Terpolymers with low charge densities, large charge asymmetries, or both exhibited excellent solubility in deionized (DI) water, and higher charge density terpolymers were readily dispersible in DI water; however, the higher charge density terpolymer solutions separated into polymer‐rich and polymer‐poor phases upon standing over time. Charge‐balanced terpolymers exhibited antipolyelectrolyte behavior at pH values greater than or equal to the ambient pH (6.5 ± 0.2); the same terpolymers behaved increasingly as cationic polyelectrolytes with decreasing solution pH because of the protonation of the 3‐acrylamido‐3‐methylbutanoate (AMB) repeat units. Unbalanced terpolymers generally exhibited polyelectrolyte behavior, although the effects of intramolecular electrostatic attractions (i.e., polyampholyte effects) on the hydrodynamic volume of the unbalanced terpolymer coils were evident at certain values of the solution pH and salt concentration. The dilute‐solution behavior of the terpolymers correlated well with the behavior predicted by several polyampholyte solution theories. In the semidilute regime, solution viscosities increased with increasing terpolymer charge density, and this indicated a significant enhancement of the solution viscosity by intermolecular electrostatic associations. Upon the addition of NaCl, semidilute‐solution viscosities tended to decrease because of the disruption of the intermolecular electrostatic associations. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3252–3270, 2004     

Photo‐induced association behavior of poly(sodium acrylate) bearing a small amount of malachite green

The photo‐induced association and dissociation of poly(sodium acrylate) containing a small amount of photoresponsive malachite green (MG) in aqueous solution were studied. It is known that MG dissociates into ion pairs under UV irradiation to produce the green triphenylmethyl cation. The cation thermally recombines with its counter anion to regenerate the colorless neutral compound. The random copolymer of acrylic acid with 0.05 mol % of MG monomer [P(A/MG0.05)] was soluble in aqueous 0.01 M NaCl at pH 12 as a unimer due to electrostatic repulsion between carboxylate pendent groups when the MG moieties were in the neutral form. On the other hand, these MG groups were converted to the cationic form on UV irradiation, leading to polymer aggregation driven by electrostatic interactions between the cationic MG and anionic carboxylate pendent groups. These aggregates could be dissociated by heating in the dark, as the cationic MG reverted to its neutral form, eliminating these attractive electrostatic interactions. The association and dissociation of the copolymer was monitored by dynamic light scattering (DLS). When the salt concentration in aqueous solutions of P(A/MG0.05) was increased from 0.01 to 0.5 M at pH 12, no aggregation was observed on UV irradiation because of ionic screening of the aforementioned electrostatic interactions. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

The dissolution of microcrystalline cellulose in sodium hydroxide-urea aqueous solutions

It has been reported that cellulose is better dissolved in NaOH-water when a certain amount of urea is added. In order to understand the mechanisms of this dissolution and the interactions between the components, the binary phase diagram of urea/water, the ternary urea/NaOH/water phase diagram and the influence of the addition of microcrystalline cellulose in urea/NaOH/water solutions were studied by DSC. Urea/water solutions have a simple eutectic behaviour with a eutectic compound formed by pure urea and ice (one urea per eight water moles), melting at −12.5 °C. In the urea/NaOH/water solutions, urea and NaOH do not interact, each forming their own eutectic mixtures, (NaOH + 5H₂O, 4H₂O) and (urea, 8H₂O), as found in their binary mixtures. When the amount of water is too low to form the two eutectic mixtures, NaOH is attracting water at the expense of urea. In the presence of microcrystalline cellulose, the interactions between cellulose and NaOH/water are exactly the same as without urea, and urea is not interacting with cellulose. A tentative explanation of the role of urea is to bind water, making cellulose-NaOH links more stable. Member of the European Polysaccharide Network of Excellence (EPNOE),     

Hydrophobically modified poly(vinyl alcohol) using alkoxy‐substituted methyl gallate: Synthesis and rheology

Hydrophobically modified poly(vinyl alcohol) (HMPVA) polymers were synthesized by potassium t‐butoxide‐catalyzed reaction of PVA with methyl 3,4,5‐tris(n‐octyloxy) benzoate (MGC₈)/3,4,5‐tris(n‐dodecyloxy) benzoate (MGC₁₂) and 1,3‐propane sultone. The concentration of 1,3‐propane sultone was kept constant at 10 mol % and that of MGC₈ (2, 3, and 4 mol %)/MGC₁₂ (2 and 3 mol %) was varied to obtain HMPVAs with different hydrophobic contents. The incorporation of MGC₈/MGC₁₂ and 1,3‐propane sultone onto HMPVA was confirmed by NMR spectroscopy. Rheological properties of aqueous solutions also confirmed the presence of hydrophobic and charged functional groups on HMPVAs. In the semidilute regime, the specific viscosity of HMPVAs followed concentration scaling that is typical of polyelectrolytes. At higher concentrations, the HMPVA solutions with 3 and 4 mol % of MGC₈ exhibited large increase in specific viscosity. Oscillatory experiments on these solutions exhibited gel‐like behavior at polymer concentrations of 40–50 g/L. Confocal microscopy images of HMPVA with 4 mol % of MGC₈ clearly indicated the existence of microgels. The tendency of formation of microgels further increased with increasing chain length of the hydrophobe, that is, with MGC₁₂. These samples exhibited rheological behavior that is typical of soft solids and was therefore probed by the strain‐rate frequency superposition technique reported recently in the literature. HMPVAs with improved rheological properties show potential applications as thickeners in cosmetic creams, lotions and as drug carriers in pharmaceutical formulations. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1054–1063, 2010     

pH‐Responsive ampholytic terpolymers of acrylamide,sodium 3‐acrylamido‐3‐methylbutanoate,and (3‐acrylamidopropyl)trimethylammonium chloride. I. Synthesis and characterization

Low-charge-density ampholytic terpolymers composed of acrylamide, sodium 3-acrylamido-3-methylbutanoate (NaAMB), and (3-acrylamidopropyl)trimethylammonium chloride were prepared via free-radical polymerization in 0.5 M NaCl to yield terpolymers with random charge distributions. NaOOCH was used as a chain-transfer agent during the polymerization to eliminate the effects of the monomer feed composition on the degree of polymerization (DP) and to suppress gel effects and broadening of the molecular weight distribution. The terpolymer compositions were obtained via ¹³C NMR spectroscopy, and the residual counterion content was determined via elemental analysis for Na⁺ and Cl⁻. The molecular weights (MWs) and polydispersity indices (PDIs) were determined via size exclusion chromatography/multi-angle laser light scattering (SEC–MALLS); the terpolymer MWs ranged from 1.3–1.6 × 10⁶ g/mol, corresponding to DPs of 1.6–1.9 × 10⁴ repeat units, with all terpolymers exhibiting PDIs of less than 2.0. Intrinsic viscosities determined from SEC–MALLS data and the Flory–Fox relationship were compared to intrinsic viscosities determined via low-shear dilute-solution viscometry and were found to agree rather well. Data from the SEC–MALLS analysis were used to analyze the radius of gyration/molecular weight (R_g–M) relationships and the Mark–Houwink–Sakurada intrinsic viscosity/molecular weight ([η]–M) relationships for the terpolymers. The R_g–M and [η]–M relationships revealed that most of the terpolymers exhibited little or no excluded volume effects under size exclusion chromatography conditions. Potentiometric titration of terpolymer solutions in deionized water showed that the apparent pK_a value of the poly[acrylamide-co-sodium 3-acrylamido-3-methylbutanoate-co-(3-acrylamidopropyl)trimethylammonium chloride] terpolymers increased with increasing NaAMB content in the terpolymers and increasing ratios of anionic monomer to cationic monomer at a constant terpolymer charge density. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3236–3251, 2004     

Compositional heterogeneity effects in multisticker associative polyelectrolytes prepared by micellar polymerization

An aqueous micellar radical polymerization technique has been used to prepare water‐soluble polyelectrolytes of acrylamide (AM) and sodium 2‐acrylamido‐2‐methylpropanesulfonate (NaAMPS) hydrophobically modified with low amounts (2–4 mol %) of N,N‐dihexylacrylamide (DiHexAM). This synthesis method leads to multisticker polymers, in which the number and length of the hydrophobic blocks vary with the degree of conversion. Kinetic studies show an appreciable compositional heterogeneity for these polymers, in contrast to their neutral analogues (i.e., AM/DiHexAM copolymers). The drift in composition observed for the AM/NaAMPS/DiHexAM terpolymers is attributed to the electrostatic repulsion between the negatively charged growing polymeric chains, located in the aqueous continuous medium, and the anionic sodium dodecyl sulfate micelles, inside of which the hydrophobic monomer is entrapped. It is shown that an optimization of the polymerization process can be achieved, which gives terpolymers of homogeneous and well‐defined compositions. The thickening ability of the hydrophobically modified polyelectrolytes is directly affected by the extent of their compositional heterogeneity: an increase in the sample homogeneity leads to a significant viscosity enhancement and marked elastic properties of the polymer solutions. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3261–3274, 2003     

Comparative study of electrostatic binding vs. complexation of Cu2+ ions with water‐soluble polymers containing styrene sulphonic acid and/or maleic acid units or their sodium salt forms

The interaction of Cu²⁺ ions with the homopolymer poly(styrene sulfonic acid) (PSSH), as well as with the copolymers of maleic acid (MAc) with styrene sulfonic acid (SSH) or vinyl acetate (VAc), was investigated in dilute aqueous solution through turbidimetry, potentiometry, viscometry, and spectrophotometry in the visible region. Cu²⁺ ions were introduced either through neutralization with Cu(OH)₂ of the acid form of the (co)polymers (PSSH, P(SSH‐co‐MAc) and P(VAc‐co‐MAc)) or through mixing of the sodium salt form of the (co)polymers (PSSNa, P(SSNa‐co‐MANa) and P(VAc‐co‐MANa)) with CuSO₄. Turbidimetry, potentiometry, and spectrophotometry revealed that the first carboxylic group of MAc or both carboxylate groups of MANa are involved in the complexation with Cu²⁺ ions when neutralization with Cu(OH)₂ or mixing with CuSO₄ are applied, respectively. The increased values of the reduced viscosity observed mainly at the first stages of neutralization of P(VAc‐co‐MAc) with Cu(OH)₂ indicate that interchain polymer‐Cu²⁺ complexation takes possibly place. Finally, the spectrophotometric behavior observed upon neutralization of P(SSH‐co‐MAc) with Cu(OH)₂ or mixing of P(SSNa‐co‐MANa) with CuSO₄ revealed that the strength of counterion binding by the sulfonate groups is, in fact, comparable with the complexation of Cu²⁺ ions with the carboxylate groups of MAc. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1149–1158, 2008     

Polyampholyte terpolymers of amphoteric,amino acid‐based monomers with acrylamide and (3‐acrylamidopropyl)trimethyl ammonium chloride

Low‐charge‐density amphoteric copolymers and terpolymers composed of acrylamide, (3‐acrylamidopropyl)trimethyl ammonium chloride, and the amino acid derived monomers (e.g., N‐acryloyl valine, N‐acryloyl alanine, and N‐acryloyl aspartate) were prepared via free‐radical polymerization in aqueous media to yield terpolymers with random charge distributions and homogeneous compositions. Sodium formate (NaOOCH) was employed as a chain transfer agent during the polymerization to suppress gel effects and broadening of the molecular weight distribution. Terpolymer compositions were determined by ¹³C and ¹H NMR spectroscopy. Terpolymer molecular weights and polydispersity indices were obtained via size exclusion chromatography/multi‐angle laser light scattering, and hydrodynamic diameter values were obtained via dynamic light scattering. The solution properties of low‐charge‐density amphoteric copolymers and terpolymers have been studied as a function of solution pH, ionic strength, and polymer concentration. The low‐charge‐density terpolymers display excellent solubility in deionized (DI) water with no phase separation. The charge‐balanced terpolymers exhibit antipolyelectrolyte behavior at pH values ≥(6.5 ± 0.2). As solution pH is decreased, these charge‐balanced terpolymers become increasingly cationic because of the protonation of the anionic repeat units. Charge‐imbalanced terpolymers generally demonstrate polyelectrolyte behavior, although the effects of intramolecular electrostatic interactions (e.g., polyampholyte effects) on the hydrodynamic volume are evident at certain values of solution pH and salt concentration. The aqueous solution behavior (i.e., globule‐to‐coil transition at the isoelectric point in the presence of salt and globule elongation with increasing charge asymmetry) of the terpolymers in the dilute regime correlates well with that predicted by the polyampholyte solution theories of Dobrynin and Rubinstein as well as Kantor and Kardar. Examination of comonomer charge density, hydrogen‐bonding ability, and spacer group (e.g., the moiety separating the ionic group from the polymer chain) indicates that conformational restrictions of the amino acid comonomers result in increased chain stiffness and higher solution viscosities in DI water and brine solutions. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4479–4493, 2006     

Synthesis and cyclopolymerization of novel allyl‐acrylate quaternary ammonium salts

Novel allyl‐acrylate quaternary ammonium salts were synthesized using two different methods. In the first (method 1), N,N‐dimethyl‐N‐2‐(ethoxycarbonyl)allyl allylammonium bromide and N,N‐dimethyl‐N‐2‐(tert‐butoxycarbonyl)allyl allylammonium bromide were formed by reacting tertiary amines with allyl bromide. The second (method 2) involved reacting N,N‐dialkyl‐N‐allylamine with either ethyl α‐chloromethyl acrylate (ECMA) or tert‐butyl α‐bromomethyl acrylate (TBBMA). The monomers obtained with the method 2 were N,N‐diethyl‐N‐2‐(ethoxycarbonyl)allyl allylammonium chloride, N,N‐diethyl‐N‐2‐(tert‐butoxycarbonyl)allyl allylammonium bromide, and N,N‐piperidyl‐N‐2‐(ethoxycarbonyl)allyl allylammonium chloride. Higher purity monomers were obtained with the method 2. Solution polymerizations with 2,2′‐azobis(2‐amidinopropane) dihydrochloride (V‐50) in water at 60–70°C gave soluble cyclopolymers which showed polyelectrolyte behavior in pure water. Intrinsic viscosities measured in 0.09M NaCl ranged from 0.45 to 2.45 dL/g. ¹H‐ and ¹³C‐NMR spectra indicated high cyclization efficiencies. The ester groups of the tert‐butyl polymer were hydrolyzed completely in acid to give a polymer with zwitterionic character. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 901–907, 1999     

Radiation preparation and swelling behavior of sodium carboxymethyl cellulose hydrogels

Sodium carboxymethyl cellulose (CMC) is a kind of degraded polymer under γ-irradiation. However, in this work, it has been found that CMC crosslinks partially to form hydrogel by radiation technique at more than 20% CMC aqueous solution. The gel fraction increases with the dose. The crosslinking reaction of CMC is promoted in the presence of N₂ or N₂O due to the increase of free radicals on CMC backbone, but gel fraction of CMC hydrogel is not high (<40%). Some important values related to this kind of new CMC hydrogel synthesized under different conditions, such as radiation yield of crosslinking G(x), gelation dose R_g, number average molecular weight of network M_c were calculated according to the Charlesby–Pinner equation. The results indicated that although crosslinked CMC hydrogel could be prepared by radiation method, the rate of radiation degradation of CMC was faster than that of radiation crosslinking due to the character of CMC itself. Swelling dynamics of CMC hydrogel and its swelling behavior at different conditions, such as acidic, basic, inorganic salt as well as temperature were also investigated. Strong acidity, strong basicity, small amount of inorganic salts and lower temperature can reduce swelling ratio.     

Preparation of isotactic‐rich poly(dimethyl vinylphosphonate) and poly(vinylphosphonic acid) via the anionic polymerization of dimethyl vinylphosphonate

A vinylphosphonate monomer, dimethyl vinylphosphonate (DMVP), has been polymerized by anionic initiators. Anionic polymerization of DMVP with tert‐butyllithium (t‐BuLi) in combination with a Lewis acid, tributylaluminum (n‐Bu₃Al), in toluene proceeded smoothly to give an isotactic‐rich poly(dimethyl vinylphosphonate) (PDMVP) with relatively narrow molecular weight distribution. Although all the PDMVPs were soluble in water, the isotactic‐rich PDMVP was insoluble in acetone and in chloroform which are good solvents for an atactic PDMVP prepared by radical polymerization. The isotactic‐rich PDMVP showed higher thermal property than that of the atactic PDMVP. Moreover, we successfully prepared poly(vinylphosphonic acid) (PVPA) through the hydrolysis of the isotactic‐rich PDMVP, which formed a highly transparent, self‐standing film. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1677–1682, 2010     

Thermoreversible gelation and phase separation in aqueous methyl cellulose solutions

We derived typical phase diagrams for aqueous solutions of methyl cellulose (MC) of different molecular weights via micro‐differential scanning calorimetry, small‐angle X‐ray scattering, and visual inspection. The phase diagrams showed the cooccurrence of gelation and phase separation and qualitatively agreed with the theoretically calculated diagrams. The sol–gel transition line and phase separation line of a lower critical solution point type shifted toward lower temperatures and lower concentrations with an increase in the MC molecular weight. The sol–gel transition line intersected at a temperature higher than the critical point of the phase separation; therefore, both sol–gel phase separation and gel–gel phase separation were possible, depending on the temperature. Specifically, through visual inspection of a high molecular weight MC sample in the critical temperature region, we observed phase separation into two coexisting gels with different polymer concentrations. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 91–100, 2001     

Chain dimensions and transport coefficients of sodium poly(isoprenesulfonate) in aqueous sodium chloride

Sodium poly(isoprenesulfonate) (NaPIS) fractions consisting of 1,4‐ and 3,4‐isomeric units (0.44:0.56) and ranging in molecular weight from 4.9 × 10³ to 2.0 × 10⁵ were studied by static and dynamic light scattering, sedimentation equilibrium, and viscometry in aqueous NaCl of a salt concentration (C_s) of 0.5‐M at 25 °C. Viscosity data were also obtained at C_s = 0.05, 0.1, and 1 M. The measured z‐average radii of gyration 〈S²〉_z^1/2, intrinsic viscosities [η], and translational diffusion coefficients D at C_s = 0.5‐M showed that high molecular weight NaPIS in the aqueous salt behaves like a flexible chain in the good solvent limit. On the assumption that the distribution of 1,4‐ and 3,4‐isomeric units in the NaPIS chain is completely random, the [η] data for high molecular weights at C_s = 0.5 and 1 M were analyzed first in the conventional two‐parameter scheme to estimate the unperturbed dimension at infinite molecular weight and the mean binary cluster integral. By further invoking a coarse‐graining of the NaPIS molecule, all the [η] and D data in the entire molecular weight range were then analyzed on the basis of the current theories for the unperturbed wormlike chain combined with the quasi‐two‐parameter theory. It is shown that the experimental 〈S²〉_z, [η], and D are explained by the theories with a degree of accuracy similar to that known for uncharged linear flexible homopolymers. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2071–2080, 2001     

Comprehensive study on the formation of polyelectrolyte complexes from (quaternized) poly[2‐(dimethylamino)ethyl methacrylate] and poly(2‐acrylamido‐2‐methylpropane sodium sulfonate)

Polyelectrolyte complexes (PECs) have been prepared from well‐defined (quaternized) poly[2‐(dimethylamino)ethyl methacrylate] (PDMAEMA) and high molecular weight poly(2‐acrylamido‐2‐methylpropane sodium sulfonate) (PAMPSNa) after a thorough study of their viscometric properties. The effect of pH and quaternization degree of PDMAEMA on PECs stoichiometry has been examined. PEC‐based materials have been characterized in terms of thermal stability, equilibrium swelling degree, and free/bound water composition. The stoichiometry and swellability of the physically crosslinked hydrogels obtained from fully quaternized PDMAEMA/PAMPSNa complexes do not depend on pH. In contrast, PECs made of non quaternized PDMAEMA and PAMPSNa are highly affected by pH, and could reversibly disintegrate at pH ≥ 9. Partially quaternized PDMAEMA/PAMPSNa PECs exhibit intermediate properties and form stable loose structures in the whole investigated pH range. Finally, stable dispersions of PECs nanoparticles have been successfully produced from dilute solutions of the complementary polyelectrolytes. The nanoparticle average diameter as determined by dynamic light scattering proved to depend on the molar fraction of DMAEMA‐based subunits and on the initial polyelectrolyte concentration. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5468–5479, 2006     

Pd‐initiated polymerization of diazo compounds bearing dialkoxyphosphinyl group and hydrolysis of the resulting polymers and oligomers to afford phosphonic acid‐containing products

Pd‐initiated polymerization and oligomerization of diazo compounds containing a dialkoxyphosphinyl group are described. Polymerization of 2‐dialkoxyphosphinylethyl diazoacetates with π‐allylPdCl‐based initiating systems afforded C? C main chain polymers bearing phosphonate on each main chain carbon atom. The quantitative transformation of the side chain phosphonate to phosphonic acid resulted in the formation of water soluble polymers having the acid groups accumulated around their main chains, although the carbonyl ester linkage in the side chain was cleaved via intramolecular acid‐assisted hydrolysis in water at 80 °C. Pd‐initiated oligomerization of diethyl diazomethylphosphonate yielded an oligomeric product bearing diethoxyphosphiny groups directly attached to its main chain carbons, with unexpected incorporation of azo group in the main chain framework. Hydrolysis of the phosphonate of the oligomer afforded a water‐soluble product, which was revealed to show higher proton conductivity than poly(vinylphosphonic acid) under certain conditions. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1742–1751     

Structure of algal-born phenolic polymeric adhesives

Adhesive materials extracted from the brown alga Fucus serratus are composed of phenolic polymer, alginate, and CaCl2. The phenolic polymer undergoes an oxidation reaction in the presence of bromoperoxidase, KI, and H2O2. The nanostructure of the adhesive was investigated using small angle X-ray scattering, light scattering, and cryo- transmission electron microscopy experiments. These have shown that the phenolic polymer undergoes self-assembly and forms flexible chain-like objects. Oxidation or adding alginate does not alter this structure. However, once calcium ions are added, a rigid network is formed. Presumably, this network is responsible for the cohesive strength of the glue.     

Solvent‐free polymerization of citric acid and D‐sorbitol

Copolymers of citric acid and D ‐sorbitol were synthesized with a solvent‐free vacuum‐oven synthesis with molar ratios of citric acid to D ‐sorbitol ranging from 1/1 to 6/1. The extent of the reaction was followed by the monitoring of the residual acid content of the system. As expected, the reaction occurred much more rapidly at 150 than at 110 °C. The Fourier transform infrared (FTIR) spectra of the products showed the expected FTIR bands at approximately 1735 and 1188 cm^?1, which were indicative of ester formation. Gel permeation chromatography showed a major product with a molecular weight of approximately 3500 Da. An insoluble material with a water‐absorption index of up to 17 was also synthesized and could lead to possible applications as absorbers, thickeners, and biobased seed coatings. Additionally, the mono‐ and disodium salts of citric acid were also polymerized with D ‐sorbitol in a manner similar to that of the citric acid system. Soluble polymers were synthesized with a residual acid content of 5 mequiv/g of polymer. These materials showed Ca⁺²‐sequestering ability (up to 0.56 mmol of Ca⁺²/g of the product). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4259–4267, 2006