Electronic absorption of carboxylic acids and their anions

Electronic spectra of formic, acetic, mono-, di-, trichloro- and trifluoroacetic, glycolic, cyanoacetic, pivalic, α-methoxyacetic, lactic, oxalic, tartaric and citric acids and betaine and of corresponding anions were recorded. The acid forms of all the carboxylic acids studied show a medium-strong π → π^* and a weak n → π^* absorption band, the latter in the 220–250-nm region. The corresponding anions (or the completely dissociated forms of polybasic acids) show the π → π^* absorption bands, but no indication of a shoulder corresponding to a n → π^* transition. Changes in the absorbance in the wavelength region corresponding to the n → π^* transition with addition of alkali metal hydroxides can be used for end-point detection in titrations. Changes of these absorbances in solutions of buffers or strong acids can be used for pK determinations. A pK value of 0.89 (at μ = 0.5) was found for dichloroacetic acid; approximate pK values were established by means of the H_o acidity scale for trichloroacetic acid (—0.80) and trifluoroacetic acid (—0.92). Finally, absorbances in the 220–250-nm region can be used for determination of carboxylic acids in solutions of strong acids, and some buffers, like phosphate or borate.     

Capillary zone electrophoresis of basic drugs in non-aqueous acetonitrile with buffers based on a conventional pH scale

Summary The pK _a ^* values of 10 nitrogen-containing basic drugs in non-aqueous acetonitrile were determined from the pH^* dependence of their electrophoretic mobilities. The pH^* scale in the organic solvent was established using background electrolytes with known conventional pK _a ^* values, making further calibration with reference pH electrodes unnecessary. In acetonitrile the pK _a ^* values of analytes (or their conjugated cation acids, BH⁺, respectively) were 5.2±8.9 pK units>those in water. The observed change in pK _a ^* values of cationic analytes was, however, much less than the known respective change for neutral acids type HA. From the pK _a ^* values and the actual mobilities, it is possible to predict pH^* conditions to enable separation of analytes, and this was demonstrated for two pairs of common drugs.     

Échelle d'acidité dans l'hydrogénodifluorure de potassium (KHF2) fondu à 250°C: Détermination électrochimique

In molten potassium hydrogenodifluoride (KHF₂) fully ionized into K⁺ and HF₂^?, at 250°C, the HF₂^? ion is slightly dissociated according to the equilibrium: HF₂^?HF+F^?. This is a solvent acid base equilibrium, HF being the strongest acid and F^? the strongest base in this system. By means of a voltammetric study we showed that the hydrogen electrode may be used as an acidity indicator electrode in the whole acidity range of the melt. By analysis of the equilibrium potential variation in acidic and in basic media, the HF₂^? dissociation constant (melt autoprotolysis constant): K_D = {HF} {F^?} was determined The experimental value: K_D=10^?2.05 mol² kg^?2 is compared with a calculated one, issued from thermodynamic data. Results obtained with other electrodes (LaF₃ monocrystal electrode and copper electrode) were discussed and compared with those obtained with the hydrogen electrode.     

Influence of medium acidity upon the luminescence properties of 2,5-diphenyl-1,3,4-oxadiazole and 2,5-diphenyl-1,3-oxazole

The luminescence properties of 2,5-diphenyl-1,3,4-oxadiazole and 2,5-diphenyl-1,3-oxazole in aqueous solutions of sulfuric acid (pH 7 to H_o − 10) were studied. The spectral parameters are essentially acidity dependent, which is due to the acid-base equilibria of these heterocycles both in the ground and in the first excited singlet states. The difference between these two compounds is governed by their dissimilar solvation. The basicity constants of 2,5-diphenyl-1,3,4-oxadiazole in the S₀ state (pK_BH+ = − 2.49) and 2,5-diphenyl-1,3-oxazole in the S₀ and S₁ states (pK_BH+ = −1.93, pK_BH+^* = 1.95) were experimentally obtained. The enthalpies of formation, electron charge density, and geometry of the bases and corresponding conjugate acids in the S₀ and S₁ states were calculated by the MNDO method.     

Determination of the concentration of strong acids with a permaplex membrane electrode in the presence of hydrofluoric acid and various cations

A strongly acidic cation-exchanger membrane electrode was used to measure the concentration of nitric, hydrochloric and sulphuric acid over the range 10^-3-7 N. Hydrofluoric acid interfered when its concentration approached that of the strong acid. The electrode showed selectivity for H⁺ over the cations Cr³⁺, Fe³⁺, Ni²⁺ Ag⁺ and K⁺. Measurements of the acidity could be made with a reproducibility of the order of tenths of a millivolt. It was shown that the electrode could be used for direct measurement of acidity in stainless steel pickling baths.     

The solution chemistry of ethylmethylglyoxime : Part I. The proton complex

The solubility of ethylmethylglyoxime (EMG) was studied as a function of pH. The solubility K_sl in 0.1 M aqueous solution is 0.0132 ±0.0006 M. The distribution constants K_Dl of EMG between various organic solvents and 0.1 M aqueous solution were found to be —0.47 for chloroform, —0.51 for benzene, —1.10 for carbon tetrachloride and —1.83 for hexane. The acid dissociation constants were determined from potentiometric titrations; the values pK_a1=10.51 and pK_a2=12.02 were obtaining by fitting the experimental data to normalized curves. The UV spectra of 5·10^-5M EMG solutions of varying pH were measured between 210 and 290 nm. It is shown that H₂A has an absorption maximum at 226 nm and HA^-and A^2- have absorption maxima at nearly the same wavelengths, i.e. 258 and 266 nm, respectively. The spectra of HA^- and A^2- have approximately the same form. The data are compared with those of dimethylglyoxime (DMG). The distribution constants (org/aq) are 4–5 times higher for EMG. The acid dissociation constants are about the same for EMG and DMG, but EMG is more soluble in water than DMG (13.2 and 5.0 mmoles/l, respectively). The UV spectra of EMG and DMG are very similar.     

Studies on the Physical Chemistry of (2,4-Dichlorophenoxy)acetic Acid in Two-phase Systems: Organic Solvent-Water

The dissociation constants (p _s K _a ) of 2,4-D acid were determined in methanol-water mixtures of 10.9 to 38.9 wt.% methanol content. The Yasuda-Shedlovsky procedure was used to obtain the pK _a value in zero-% methanol. The distribution of 2,4-D acid in twelve two-phase organic solvent + water systems and its dimerization in the organic phase were investigated. Values of the distribution coefficient (D _HR), distribution constant (K _D ), and dimerization constant (K _dim) of 2,4-D were obtained. The influence of the structure and polarity of the investigated organic solvents, as well as that of pH of the aqueous phase, on the physical chemistry of 2,4-D in the two-phase systems are described.     

Electrochemical behavior of glassy carbon electrodes modified by electrochemical oxidation

Glassy carbon electrodes were modified electrochemically by pretreatment in sulfate, phosphate or carbonate solutions by means of cycling the potential well into the positive limit of the solvent. Electrodes treated in this manner were then used to incorporate and concentrate a variety of redox species that were either cations or aromatic containing compounds, including Ru(bpy)²⁺₃, Ru(NH₃)³⁺₆, Cu(NH₃)²⁺₄, ferrocene, methylviologen, 1,4-benzoquinone, anthraquinone-2-sulfonate, riboflavin, flavin mononucleotide (FMN) and flavin adenine dinucleotide (FAD). Surface-equivalent concentrations ranged from 5 × 10^?9 to 1 × 10^?7 mol cm^?2 for electrodes pretreated for 10 min in sulfuric acid. An E_1/2 vs. pH study of 1,4-benzoquinone, riboflavin, FMN and FAD in modified electrodes shows that the pK_a values shift toward higher pH (nearly 2 pH units). Results concerning the incorporation of redox compounds detected only by mediation with other electroactive complexes and the study of the modified electrodes in electrocatalysis are also discussed.     

A generalized form of the extraction constant for the partition of a metal chelate between immiscible aqueous and organic phases

The theory underlying the partition of sparingly soluble reagents and their formally neutral metal chelates between an aqueous phase and any immisicible organic phase leads to a generalized extraction constant K^*_ex=K_exSⁿ_r,0/S_c,o where K_ex is the conventional extraction constant and S_r,oS_c,o are the molar solubilities of reagent and metal complex, respectively, in the same organic solvent. The predicted constancy of K^*_ex is confirmed for measurements in seven solvents and for systems involving mono-, di- and tridithizonates of Ag⁺, Zn²⁺ and Bi³⁺, respectively.     

TiO2和Mg-Fe型类水滑石特征电离/络合平衡常数研究

The intrinsic surface reaction constants, pKa1^int, pKa2^int, p^＊KC^int and p^＊KA^int , were evaluated by a modifieddouble extrapolation （MDE） for TiO2 without structural charge and Mg-Fe hydrotalcite-like compounds （HTlc） with structural charge, respectively. The results of intrinsic surface reaction constants for TiO2 were compared with those obtained by class double extrapolation （CDE） in literature. Furthermore, the values of intrinsic surface reaction constants obtained by MDE were used to simulate the charging behaviors of the materials. The following conclusions were obtained. For TiO2 without structural charge, the pKa1^int and pKa2^int evaluated by MDE are equal to those by CDE, however the p^＊KC^int and p^＊KA^int evaluated by MDE are much different from those by CDE. In principle, the results of the p^＊KC^int and p^＊KA^int evaluated by MDE are more accurate than those by CDE. The values of intrinsic surface reaction constants obtained by MDE can excellently simulate the charging curves for TiO2 with the triple layer model （TLM）. For HTlc with positive structural charge, the results of ^＊KC^int=0 and ^＊KA^int →∞ were obtained by MDE, which means the inert electrolyte chemical binding does not exist; the point of zero net charge （PZNC） of c-independence also exist as the same as solid without structural charge, and the PHPZNC obtained by the acid-base titration can excellently be simulated and the surface charging tendency can be simulated to a great extent using the pKa1^int and pKa2^int evaluated by MDE and the diffuse layer model （DLM）.     

Liquid membrane transportation of fluoride ions with alizarin based azacrown ether Zr-complex

A new alizarin based azacrown ether N-(alizarin-4-methylene)-4-azadibenzo-18-crown-6 (AMADCE) was synthesized, for the transportation of fluoride ions, by reacting 4-aza dibenzo 18-crown-6 with alizarin in the presence of formaldehyde. The compound forms a stable purple-red coloured complex with Zr(IV) in 0.5-1.0 M hydrochloric acid and gets quantitatively extracted into diphenyl ether. This diphenyl ether extract of the Zr(IV) complex instantaneously transfers fluoride ions from the aqueous phase, which was utilised for the sensitive determination and transportation of fluoride ions through the liquid membrane. The conditions like concentration of membrane phase, acidity of the source phase and the receiving phase, and the transportation time were optimized. The continuous transportation of fluoride ions was achieved by adding receptor ions like La³⁺ and Ca²⁺ in the receiving phase. The rate constant K and t_1/2 for the transportation were determined. The studies were extended for the removal of fluoride ions through the liquid membrane from the ground water samples and industrial effluent.     

Potentiometric Titration of Weak Acids

Abstract

A desk-calculator program has been developed for determination of the equivalence point when a weak acid is titrated with a strong base. The stability constant (K^H _HA) of the acid can be computed simultaneously. When data from a potentiometric titration of boric acid with sodium hydroxide have been processed with the program the equivalence point has been determined with an accuracy of 0.3–0.4 per cent. The computed value of the stability constant of boric acid (log K^H _HA = 9.11) is in good agreement with the values given in literature.     

A pH Scale for the Protic Ionic Liquid Ethylammonium Nitrate

To quantify the properties of protic ionic liquids (PILs) as acid–base reaction media, potentiometric titrations were carried out in a neat PIL, ethylammonium nitrate (EAN). A linear relationship was found between the 14 pK_a values of 12 compounds in EAN and in water. In other words, the pK_a value in EAN was found to be roughly one unit greater than that in water regardless of the charge and hydrophobicity of the compounds. It is possible that this could be explained by the stronger acidity of HNO₃ in EAN than that of H₃O⁺ in water and not by the difference in the solvation state of the ions. The pH value in EAN ranges from ?1 to 9 on the pH scale based on the pH value in water.     

Collisional quenching of K* (4p2p) and K* (5p2p by H2O,CF4, and CH4

Rate constants are reported for collisional quenching of K^* (4p^2p and K^* (5p^2p) by H₂O, CF₄ and CH₄. The K^* (4p^2p or K^*(5p^2p) is produced by photodissociation of K1 vapor at 2450 Å or 1925 Å, respectively. As for Na^* (3p^2p, H₂O, CF₄, and CH₄ are very inefficient at quenching K^* (4p^2p); however, they are very efficient at quenching K^* (5p^2p).     

Experimental and computational study of the pKa of coumaric acid derivatives

The dissociation constant (pK_a) of a drug is a key parameter in drug discovery and pharmaceutical formulation. The hydroxy substituent has a significant effect on the acidity of hydroxycinnamic acid. In this work, the acidic constants of coumaric acids are obtained experimentally by spectrophotometry using the chemometric method and calculated theoretically using ab initio quantum mechanical method at the HF/6‐31G* level of theory in combination with the SMD continuum solvation method. Rank annihilation factor analysis (RAFA) is an efficient chemometric technique based on the elimination of the contribution of one of the chemical components from the data matrix. RAFA cannot be performed because the pure spectrum of HA^? is not available. So, two‐rank annihilation factor analysis (TRAFA) is proposed for the determination of the pK_a OF H₂A. A comparison between the pK_a values obtained previously by TRAFA for the molecules o‐coumaric acid (4.13, 9.58), m‐coumaric acid (4.48, 10.35), and p‐coumaric acid (4.65, 9.92) makes it clear that there is good agreement between the results obtained by TRAFA and ab initio quantum mechanical method.     

Bismuthiol II as an analytical reagent

Summary The estimation of bismuth by the reagent Bismuthiol II is studied critically. The effect of acidity, reagent concentration and interfering ions are given in detail. The maximum acidity that may be tolerated for the complete precipitation of bismuth is 0.3 N in nitric acid, 0.5 N in hydrochloric acid and 1N in sulphuric acid. Higher acidity than 0.1 N decomposes the reagent present in excess. In 0.1 N nitric acid bismuth has been separated from a number of ions like Al³⁺, Cr³⁺, Th⁴⁺, rare earths, Zr⁴⁺, Ti⁴⁺, UO₂ ²⁺, Be²⁺, Mn²⁺, Co²⁺, Ni²⁺, Mg, alkalis and alkaline earths, SO₄ ^2–, Cl^–, C₂O₄ ^2–- and from Fe²⁺ and Ce³⁺ in 0.1 N hydrochloric acid. In presence of a citrate or a tartrate it can be separated from As³⁺, Ce⁴⁺, MoO₄ ^2–- and WO₄ ^2–-at p_H 1.5 to 2.5. When Hg²⁺, Pb²⁺, Pd²⁺, Cd²⁺, Cu²⁺, Ag⁺ and Tl⁺ are present they are first precipitated by the reagent at p_H 6 to 8 in presence of a citrate or a tratrate and the bismuth is estimated gravimetrically in the acidified filtrate. Ions as F^– and PO₄ ^3– that form insoluble compounds with bismuth, Sb³⁺ and Sn²⁺ that form less soluble compounds with the reagent and Fe³⁺, VO₃ ^–, CrO₄ ^2–, AsO₄ ^3– that act as oxidising agents, interfere.     

Acid-base strengths in 1,2-dichloroethane

The pK_a value of hydriodic acid in 1,2-dichloroethane was determined from conductivity measurements. A glass electrode was calibrated for dichloroethane in the potentiometric titration of hydriodic acid with tetramethylguanidine. From potentiometric titrations, the pK_a values in dichloroethane of hydrobromic acid, hydrochloric acid, picric acid and some sulfonphthaleins as well as some protonated nitrogen bases were determined. In the curves of the titrations of the carboxylic acids and the hydrogen halides with TMG, evidence was found for the formation of the complex B(HX)₂.     

Thermodynamics of the second-stage dissociation of n-(2-acetamido)iminodiacetic acid in water from 5 to 55°c

The thermodynamic second dissociation constants of the protonated form of N-(2-acetamido)iminodiacetic acid were determined at 12 temperatures from 5–55°C by measurement of the electromotive force using a cell without liquid junction, with hydrogen and silver—silver bromide electrodes. At 25°C, pK₂is 6.844. The standard changes in Gibbs energy, enthalpy, entropy and heat capacity were derived from the change of the pK₂ values with temperature. At 25°C, ΔG° = 9335 cal mol^-1, ΔH° = 2928 cal mol^-1, ΔS^o = -21.5 cal K^-1 mol^-1, and ΔC°_p = -34 cal K^-1 mol^-1. The results are interpreted and compared with those of structurally related compounds.     

Prediction of the separation of phenols by capillary zone electrophoresis

The effect of pH and ionic strength on the migration of neutral acids in capillary zone electrophoresis (CZE) has been studied for several phenols. The mobilities of the phenols and the efficiency of the capillary have been related to the studied factors. The mobility can be related to the pH of the running buffer through the mobility of the phenolate ion, and the conditional acidity pK value of the phenol at the working ionic strength. This allows prediction of the migration of the phenol, solely from its pK_a^′ value (literature pK_a corrected for the ionic strength of the solution) and mobility of the anion, which can be easily calculated from the mobility at a basic pH value and the pK_a^′ value. Combination of the predicted mobility with the efficiency allows estimation of the resolution of the consecutive peaks obtained for a mixture of phenols. This method has been tested for two groups of phenols of environmental interest.     

Simulation of electrical percolation in disperse systems at a small difference between specific conductivities of components

The possibility of development of electrical percolation upon variations in the contents of components in a disperse system has been studied in terms of Bruggeman’s ideas of an effective medium and the continual model of the electrical conductivity of composite materials. The case of a small difference between the specific conductivities of a dispersed phase K_m and a dispersion medium K_d has been considered. It has been shown that the dependence of electrical conductivity K of a disperse system on volume fraction p of a wellconducting component may exhibit an inflection in the vicinity of the p* value, which depends on the K_m/K_d ratio. Different methods for determining the p* value have been described. At low ratios between the conductivities of a dispersed phase and a dispersion medium, the inflection is very weakly pronounced. However, the representation of the K(p) dependences in semilog coordinated substantially facilitates its identification.