Chemical properties of N-2-Sulfoethylchitosan with a medium degree of substitution

A method was developed for the preparation of N-2-sulfoethylchitosan (SECH) via synthesis in a gel with the use of the reaction of chitosan and sodium 2-bromoethanesulfonate. This method makes it possible to conduct a polymer-like transformation without any acid or base. The structures of the obtained polymers were confirmed via IR and ¹H NMR spectroscopy. The study of the sorption of Ag⁺, Cu²⁺, Zn²⁺, Ni²⁺, Co²⁺, Cd²⁺, Pb²⁺, Mn²⁺, Mg²⁺, Ca²⁺, Sr²⁺, and Ba²⁺ ions that were crosslinked by SECH during their joint presence in an ammonia-acetate buffer solution showed high values of selectivity in relation to those of silver(I) and copper(II). The selectivity of the sorption of silver(I) ions with respect to copper(II) ions increased with an increase in the degree of substitution of SECH.     

Cobalt(II)-selective membrane sensor based on a [Me2(13)dieneN4] macrocyclic cobalt complex

A new poly(vinyl chloride)-based membrane was fabricated with the cobalt(II) complex of 2,4-dimethyl-1,5,8,11-tetraazacyclotrideca-1,4-diene [Me₂(13)dieneN₄] as an ion carrier. The membrane composition was Co²⁺ complex/PVC/NaTPB/DBP 15:50:15:20 (w/w). The sensor exhibited a Nernstian response for Co²⁺ ions over a wide concentration range (7.94×10⁻⁶–1.0×10⁻¹ M) at pH 2.5–7.0, a response time of 10 s, and it could be used for 3 months without any significant divergence in potential. The proposed membrane sensor exhibited good selectivity for Co²⁺ over a wide variety of other metal ions and in mixtures containing up to 25% (v/v) non-aqueous content. The sensor was successfully used as an indicator electrode in the potentiometric titration of Co²⁺ with EDTA and the direct determination of Co²⁺ in real samples.     

Cobalt(II)-selective membrane electrode based on N,N′-di(thiazol-2-yl)formimidamide

A new PVC-membrane electrode for Co²⁺ ions based on N,N′-di(thiazol-2-yl)formimidamide (TF) as membrane carrier has been developed. The electrode resulted in Nernstian response (29.5?±?0.4?mV decade^?1) for Co²⁺ ion over a wide concentration range (2.5?×?10^?7 ?1.0?×?10^?1?M) with a detection limit of 6.1?×?10^?8?M. The sensor has a response time of about 10?s, and can be used for at least 2 months without observing any deviation from the Nernstain response. The electrode revealed good selectivity towards cobalt(II) ion over a wide variety of alkali, alkaline earth, transition, and heavy metal ions and could be used in the pH range 2.0–7.0. The electrode was used for determination of Co²⁺ in real samples.     

Sorption selectivity of cobalt(II), nickel(II), and copper(II) ions by KB-2E macroreticular carboxylic cation exchanger from aqueous-salt solutions of alkali metals

Sorption selectivity of copper(II), nickel(II), and cobalt(II) ions by KB-2E macroreticular carboxylic cation exchanger in the Na-form from dilute solutions was studied in the target concentration range (0.52.6) 103 M. The equilibrium distribution coefficients of Co²⁺, Ni²⁺, and Cu²⁺ were calculated. The role played by hydration of ions in their sorption by KB-2E cation exchangers is analyzed with consideration for IR spectroscopic, thermal analysis, and scanning electron microscopic data.     

Eco‐friendly Sensors Developed by Herbal Based Silver Nanoparticles for Electrochemical Detection of Mercury (II) Ion

In our study, the single‐use & eco‐friendly electrochemical sensor platform based on herbal silver nanoparticles (AgNPs) was developed for detection of mercury (II) ion (Hg²⁺). For this purpose, the surface of pencil graphite electrode (PGE) was modified with AgNPs and folic acid (FA), respectively. The concentrations of AgNPs and FA were firstly optimized by differential pulse voltammetry (DPV) to obtain an effective surface modification of PGE. Each step at the surface modification process was characterized by using cyclic voltammetry (CV) and electrochemical impedence spectroscopy (EIS). The limit of detection (LOD) for Hg²⁺ was estimated and found to be 8.43 μM by CV technique. The sensor presented an excellent selectivity for Hg²⁺ against to other heavy metal ions such as Ca²⁺, Cd²⁺, Cr³⁺, Cu²⁺, Mg²⁺, Ni²⁺, Pb²⁺, Zn²⁺, Co²⁺ and Mn²⁺. Moreover, a rapid, selective and sensitive detection of Hg²⁺ was successfully performed in the samples of tap water within 1 min.     

Silver(I)‐Selective PVC Membrane Potentiometric Sensor Based on a Recently Synthesized Calix[4]arene

A new PVC membrane potentiometric sensor for Ag(I) ion based on a recently synthesized calix[4]arene compound of 5,11,17,23‐tetra‐tert‐butyl‐25,27‐dihydroxy‐calix[4]arene‐thiacrown‐4 is developed. The electrode exhibits a Nernstian response for Ag(I) ions over a wide concentration range (1.0×10^?2?1.0×10^?6 M) with a slope of 53.8±1.6 mV per decade. It has a relatively fast response time (5–10 s) and can be used for at least 2 months without any considerable divergence in potentials. The proposed electrode shows high selectivity towards Ag⁺ ions over Pb²⁺, Cd²⁺, Co²⁺, Zn²⁺, Cu²⁺, Ni²⁺, Sr²⁺, Mg²⁺, Ca²⁺, Li⁺, K⁺, Na⁺, NH₄⁺ ions and can be used in a pH range of 2–6. Only interference of Hg²⁺ is found. It is successfully used as an indicator electrode in potentiometric titration of a mixture of chloride, bromide and iodide ions.     

New fluorescent chemosensor for Zn2+ ions on the basis of 3,3′-bis(dipyrrolylmethene)

Luminescence study of the reaction of 3,3′-methanediylbis(2,4,7,8,9-pentamethyldipyrrolylmethene) (H₂L) with a number of metal salts showed that this compound is an efficient fluorescent chemosensor for Zn²⁺ ions in organic solvents. The selectivity and sensitivity of H2L were estimated in various solvents in the presence of other metal cations (Na⁺, Mg²⁺, Co²⁺, Ni²⁺, Cu²⁺, Cd²⁺, Hg²⁺, Pb²⁺).     

Separation and Recovery of Some Metal Ions Using Pan Sorbed Zinc Silicate as Chelating Ion Exchanger

Abstract

A new inorganic ion exchanger zinc silicate has been synthesized. Its properties such as ion exchange capacity, heat effect and stability etc. have been studied. Sorption of PAN over zinc silicate formed a chelate ion exchanger which showed greater selectivity for some metal ions especially for Cu²⁺, Ni²⁺, Co²⁺, Fe³⁺, Ag⁺, Ag³⁺ and Pt⁴⁺. Selectivity has been determined on the basis of distribution coefficients of these metal ions. Separations of Pt(IV) from Fe(III), Au(III) from Fe(III), Ag(I) from Cu(II) and Au(III) from Cu(II) have been reported. The recovery of Pt(IV) and Au(III) from dilute solutions has also been studied.     

Oberflächenzusammensetzung,Löslichkeit und Ionenaktivitätsprodukt von Calcit in fremdionenhaltigen Lösungen

Surface Composition, Solubility, and the Ion Activity Product of Calcite in Solutions with Auxiliary Ions Using the method of simultaneous ion and isotope exchange the chemical composition of the surface layer of calcite powder in equilibrium with solutions of varying Me/Ca molar ratios is determined (Me = Mg²⁺, Co²⁺, Ni²⁺, and Fe²⁺ ions). The ion exchange isotherms show a marked bend in the surface reactivity when a surface molar ration of ～1 and ～3 is reached. The solubility of calcite initially decreases on the addition of Co²⁺ or Ni²⁺ ions to the solution whereas it increases in the presence of Mg²⁺ or Fe²⁺ ions. The activity product of the pseudo compound, Ca_xMe_(1–x)CO₃, decreases in the Ni²⁺, Co²⁺ or Fe²⁺ exchange experiments, however, it increases considerably in those with Mg²⁺ ions.     

Spectrofluorimetric determination of picogram level Pb(II) using a dimercaptothiadiazole fluorophore

This paper describes the spectrofluorimetric determination of picogram level Pb(II) using 2,5-dimercapto-1,3,4-thiadiazole (DMT) as a fluorophore. Excitation of DMT at 330 nm shows an emission maximum at 435 nm. The colorless solution of DMT changes into highly emittive yellow color immediately after the addition of 0.5 μM Pb(II) and nearly 245-fold increase in emission intensity at 435 nm was observed. These changes were attributed to the complex formation between Pb(II). The emission intensity linearly increases in the concentration range of 10–100 nM Pb(II) and DMT. Based on the fluorescence enhancement, the concentration of Pb(II) was determined. Interestingly, the emission intensity was increased even in the presence of 0.1 pM Pb(II). The fluorophore showed an extreme selectivity towards 100 nM Pb(II) even in the presence of 50,000-fold higher concentrations of common metal ions interferences such as Na⁺, K⁺, Ca²⁺, Mg²⁺, Fe²⁺, Cd²⁺, Cr³⁺, Mn²⁺, Zn²⁺, Co²⁺, Ni²⁺ and 5000-, 100- and 40-fold of Cu²⁺, Hg²⁺ and Ag⁺ ions, respectively. The lowest detection of 20 pg L⁻¹ Pb(II) was achieved for the first time using DMT. The proposed method was successfully utilized for the determination of Pb(II) in tap water, polluted river water and industrial waste water samples. The results obtained in the present study were validated with both AAS and ICP-AES methods.     

Cobalt(II) ion-selective electrode with solid contact

A new all plastic sensor for Co²⁺ ions based on 2-amino-5 (hydroxynaphtyloazo-1′)-1,3,4 thiadiazole (ATIDAN) as ionophore was prepared. The electrode exhibits a low detection limit of 1.5 × 10⁻⁶ mol L⁻¹ and almost theoretical Nernstian slope in the activity range 4.0 × 10⁻⁶–1 × 10⁻¹ mol L⁻¹ of cobalt ions. The response time of the sensor is less than 10 s and it can be used over a period of 6 months without any measurable divergence in potential. The proposed sensor shows a fairly good selectivity for Co(II) over other metal ions. The electrode was successfully applied for determination of Co²⁺ in real samples and as an indicator electrode in potentiometric titration of Co²⁺ ions with EDTA.      

Highly selective colorimetric naked-eye Cu2+ detection using new bispyrazolone silver nanoparticle-based chemosensor

In this work, we have successfully developed novel silver nanoconjugates of pyrazolone analogue and screened its chemosensing potential in aqueous medium. Bispyrazolone silver nanoparticles (Bispyra-AgNPs) were synthesised and characterised through FTIR, UV-visible spectroscopy and atomic force microscopy. The sensing ability was explored towards Ca²⁺, Cd²⁺, Co²⁺, Cu²⁺, Fe²⁺, Li⁺, Pb²⁺, La³⁺, Hg²⁺, Mg²⁺, Ni²⁺ and Ba²⁺ metal ions, respectively. Bispyra-AgNPs showed a highly quenching potential in selective recognition of Cu²⁺and colour of the solution immediately turned from yellow to purple, after the addition of Cu²⁺ in to the solution. The developed method also displayed a remarkable selectivity for Cu²⁺ over others interfering metal ions. The binding ratio and stoichiometry of host-guest complex was found to be 1:1 and determined by Job’s method. The propose method is facile and sensitive to detect Cu²⁺ with detection limit of 10 µM.     

Influence of metal ions on the interaction between gatifloxacin and calf thymus DNA

To study the interaction between gatifloxacin (GT), metal ions (Cu²⁺, Cd²⁺, Co²⁺, Mg²⁺) and calf thymus DNA under condition of physiology pH, UV absorption and fluorescence methods were adopted. Result shows that metal ions and DNA are able to react with GT in ground state. In further research, by studying the influence of metal ions on binding of GT with DNA in metal ions–GT–DNA ternary system, we found that influential mechanism of Mg²⁺ on the binding of GT with DNA may be different from the other three. Mg²⁺ can act as a bridge in the binding of GT's carboxyl/carbonyl with DNA phosphate in certain concentration range; while Cu²⁺, Cd²⁺, Co²⁺ can combine directly with GT by reaction between GT carboxyl/carbonyl and DNA base, and enhance the binding ability of GT with DNA. The influence extent and type depend not only on the binding site of DNA with metal ions (phosphate or base), but also the binding ability of which. The stronger the binding ability of metal ions with DNA base is, the larger their promotion to binding of GT with DNA is. The order of metal ions’ influential ability on the binding of GT–DNA is identical to the binding ability order of metal ions with DNA base, that is: Cu²⁺ > Cd²⁺ > Co²⁺ > Mg²⁺.     

A luminescence probe for measurements of electron-exchange rates in polymer films on electrodes

The effect of metal ions on the, reduction of 1,10-phenanthroline-5,6-quinone (1), 5,8-quinolinequinone (II) and 6,7-dichloro-5, 8-quinolinequinone (III) has been investigated in 50% dimethylsulfoxide+water solvent. 1 contains the 1,10-phenanthroline structure in both its quinone and hydroquinone forms, while II and III contain the 8-hydroxyquinoline structure in the hydroquinone forms. Complexation of the hydroquinones of II and III by metal ions causes positive shifts in the quinone half-wave potentials. These shifts have been used to calculate conditional formation constants for Pb²⁺(II) and Pb²⁺ and Zn²⁺(III). The quinone form of I binds strongly to Ni²⁺, Co²⁺ and Zn²⁺ but not to Ca²⁺. Mg²⁺. Mg₂₊. Mn²⁺ and Pb²⁺. With the latter four metals, binding to the hydroquinone from of I was detected and formation constants were determined. In addition to binding both the quinone and hydroquinone forms at the nitrogen atoms, Ni₂₊ Co²⁺ and Zn²⁺ formed complexes at the 1,2-dihydroxy site of the hydroquinone of I.     

Chelation ion-exchange properties of salicylic acid-urea-formaldehyde copolymers

Chelation ion-exchange properties of copolymers prepared from salicylic acid, urea and formaldehyde by condensation in presence of acid catalyst were studied for Cu²⁺, Fe³⁺, UO²⁺, Mn²⁺,Zn²⁺ and Co²⁺ ions. A batch equilibration method was adopted to study the selectivity of metal ion uptake. This method involved the measurement of distribution of a given metal between the copolymer sample and a solution containing the metal ions. The study was carried out over a wide pH range and in media of various ionic strengths. The copolymer showed a higher selectivity for UO₂ ²⁺, Cu²⁺ and Fe³⁺ ions than Mn²⁺, Co²⁺ and Zn²⁺ ions.     

A highly selective colorimetric sensor for Hg2+ based on a copper (II) complex of thiosemicarbazone in aqueous solutions

By applying an indirect strategy, a new copper (Ⅱ) complex of a thiosemicarbazone L has been successfully developed as a colorimetric chemosensor for the sensitive detection of mercury (Ⅱ) ions. In the presence of copper (Ⅱ) ions, the colorless solution of L became yellow; however, upon the addition of traces of mercury (Ⅱ) ions, the yellow color faded to colorless immediately. Other ions, including Fe3+ , Ag+ , Ca2+ , Zn2+ , Pb2+ , Cd2+ , Ni2+ , Co2+ , Cr3+ and Mg2+ had a negligible influence on the probe behavior. The detection limits were 5.0×10 -6 M and 3.0×10 -7 M of Hg2+ using the visual color changes and UV-vis changes respectively. Test strips based on Cu-L were fabricated, which could act as a convenient and efficient Hg2+ test kits.     

A New Fluorescent Chemosensor for Cu2+ Based on 1,2,3,4,5,6,7,8,9,10‐Decahydroacridine‐1,8‐dione Fluorophore

A new chemosensor for Cu²⁺ was synthesized based on 1,2,3,4,5,6,7,8,9,10‐decahydroacridine‐1,8‐dione dyes, which exhibited an obvious fluorescent selectivity to the sensing of Cu²⁺ ions over other cations, such as Na⁺, K⁺, Ca²⁺, Cd²⁺, Co²⁺, Hg²⁺, Mg²⁺, Mn²⁺, Ni²⁺, Zn²⁺, Ag⁺ and Pb²⁺. Moreover, it presented a fluorescent switch function when EDTA was added to the compound‐Cu²⁺ complex in examined systems.     

Interactions of the ethanolamino groups of nanofilms with Co(II), Ni(II), Cu(II), Zn(II), and Cr(III) ammoniates at the surface of PVC plates

Interactions of nanofilms containing ethanolamino groups with cobalt(II), nickel(II), copper(II), and zinc(II) ammoniates at the surface of polyvinylchloride plates and with chromium(III) ammoniate in a solution of ammonium chloride were studied. It was found that the groups of the film, together with chloride ions, displace all ammonia molecules from the inner coordination sphere of the metal. The average number of the ethanolamino N atoms of the film participating in formation of the metal ion coordination sphere is 3.35, 3.47, 3.67, 3.42, and 3.37 for Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, and Cr³⁺ complexes, respectively. The average number of chloride ions is 2 for Co²⁺, Ni²⁺, Cu²⁺, and Zn²⁺ and 3 for Cr³⁺. The coordination number of the central atoms is 6. The Cr³⁺ ion forms a coordination sphere composed of three N atoms and three chloride ions and a coordination sphere (charged 1+) made up of four N atoms and two chloride ions, with the third chloride ion being in the outer sphere. The Co²⁺, Ni²⁺, and Cu²⁺ ions form uncharged coordination spheres of two types: (1) with four N atoms and two chloride ions and (2) with three N atoms, two chloride ions, and the O atom of the ethanol hydroxyl group.     

Divalent metal ion-sensitive holographic sensors

A holographic sensor for real-time detection of divalent metal ions (Ca²⁺, Mg²⁺, Ni²⁺, Co²⁺ and Zn²⁺) has been fabricated by incorporating a chelating monomer into a hydrogel matrix. A methacrylated analogue of iminodiacetic acid (IDA) was prepared and co-polymerised with hydroxyethyl methacrylate (HEMA) and ethylene glycol dimethacrylate (EDMA) as a cross-linker to form polymer films. A silver-based reflection hologram was incorporated into the hydrogel by diffusion followed by holographic recording using a frequency-doubled Nd/YAG laser. Changes in the replay wavelength of the hologram were used to characterise the swelling behaviour of the matrix as a function of its chemical composition and concentration of analyte in the media. The effects of active monomer, cross-linker, pH and ionic strength on the swelling of the matrix and on metal detection sensitivity have been studied. Polymers containing >10 mol% of chelating monomer and 6 mol% of cross-linker showed significant responses (46.3 nm) within 30 s at an ion concentration of 0-40 nm. The selectivity of the holograms towards the different ions tested was Ni²⁺>Zn²⁺>Co²⁺>Ca²⁺>Mg²⁺. The sensor showed fully reversible responses, permitting real-time monitoring of calcium ion efflux during the germination of Bacillus megaterium spores.     

New coumarin-based sensor molecule for magnesium and calcium ions

A new coumarin-based sensor molecule (L₁) has been synthesized and this was found to bind calcium and magnesium ions more effectively as compared to other alkali/alkaline earth/lanthanide and certain transition metal ions. A significant enhancement in fluorescence intensity was observed on binding to Ca²⁺ and Mg²⁺ ions; while a minor quenching was observed for weakly bound Hg²⁺, Ni²⁺, Fe³⁺, and Co²⁺ ions. PET process, coupled with the ICT process, is proposed to explain the observed spectral response.