Determination of lead in wines by hydride generation atomic absorption spectrometry.

The optimization of lead hydride generation in aqueous ethanolic media and the influence on its generation of the wine components, both white and red, have been studied. These interferences were overcome by careful control of the parameters affecting hydride generation and the procedure was applied to the determination of Pb in wines. The method is fast, accurate and sensitive and can be used to quantify 24 ppb of Pb in wines.     

Determination of lithium in human serum by electrothermal atomic absorption spectrometry

An efficient method was developed for the determination of nanogram levels of lithium in biological samples. Serum samples from human subjects from southeastern Spain, treated or not treated with lithium carbonate, were analyzed by electrothermal atomic absorption spectrometry. The samples were previously treated with a matrix modifier consisting of 0.1% Triton X-100 and injected through a graphite tube with L'vov platform. The Li concentrations measured by the procedure described for the 3 certified reference samples used were not significantly different (p > 0.05) than certified levels. Sample recoveries and variability during several days, with coefficients of variation from 4.00 to 14.8%, demonstrated the reliability and accuracy of this technique. Mean Li concentration determined in the serum of individuals with psychiatric disorders treated with Li (n = 117, 5.077 +/- 1.795 microg Li/mL) was significantly higher (p < 0.001) than that in individuals not treated with Li (n = 24, 1.902 +/- 2.054 ng Li/mL).     

Determination of thallium by furnace atomic absorption spectrometry

The analytical conditions for the determination of thallium by graphite furnace atomic absorption spectrometry were studied and optimized using the peak-height mode. The charring-atomization curves for thallium from different atomization surfaces were constructed and the optimum charring and atomization conditions were established. These atomization surfaces included pyrolytic graphite-, tantalum-, zirconium- and tungsten-coated graphite tubes. The effects of different inorganic acids on the absorbance of thallium from different surfaces were studied. Using tungsten carbide-coated tubes, the interference effects due to hydrochloric and perchloric acids were eliminated. The matrix modification technique was also investigated for increasing the maximum permissible charring temperature for thallium. The matrix modifiers used included tungsten, zirconium, nickel and tantalum. The effect of adding these modifiers were studied in the presence of different acids. Tungsten increased the maximum permissible charring temperature from 400 to 1000 °C.     

Determination of lithium stearate in sebacate-based lubricants by atomic absorption

An accurate method is proposed for the determination of lithium stearate in sebacate-based lubricants. The sample is treated with dilute hydrochloric acid and an extraction is performed with ethyl ether to remove di-isopropyl phosphite which would otherwise interfere by causing the subsequent precipitation of lithium phosphate or lithium metaphosphate. The aqueous extract is then evaporated to fuming with perchloric acid and the lithium is determined by atomic absorption.     

Determination of thiolic compounds as mercury complexes by cold vapor atomic absorption spectrometry and its application to wines

We report on the application of a commercially available mercury analyzer, which is based on vapour generation of Hg(0) by NaBH(4) reduction and atomic absorption detection, to the quantification and characterization of -SH groups and its application to wine samples. The behaviour of Hg(II) and thiol-Hg(II) (RS-Hg) complexes at nanomolar level (RS=l-cysteine, dl-penicillamine, N-acetyl penicillamine, glutathione, cysteinylglycine, homocysteine) has been studied following their reduction with alkaline NaBH(4) to give Hg(0). In the absence of thiol-Hg(II) is quantitatively converted to Hg(0) by stoichiometric amount of NaBH(4) (reaction ratio 1/4mole NaBH(4)/mole Hg), while the complete reduction of Hg(II)-thiol complexes to Hg(0) requires molar excess of NaBH(4) up to six orders of magnitude, depending on the type of complex and on the pK(a) of the thiolic group. Under an appropriate excess of reductant, Hg(II) and its thiol complexes are not distinguishable giving the same response. These properties allow the discrimination of Hg(II) from Hg(II)-thiol complexes without any preliminary separation and the quantification of thiol groups. Instrumental detection limits are as low as 2.5pg, permitting sample dilution, therefore, minimizing the risk of possible interferences occurring with complex real matrices. The method has been applied to quantification of thiol groups in wine samples. Comparison with results obtained by HPLC coupled to atomic fluorescence detection confirmed the promising potentialities of the method.     

Determination of chromium in sea water by atomic absorption spectrometry

A method for the determination of chromium in sea water is described which requires minimal sample preparation. The chromium from filtered samples is oxidized with permanganate, extracted with ammonium pyrrolidine dithiocarbamate into MIBK, and analyzed by atomic absorption spectrometry in a fuel-rich air-acetylene flame. Non-filterable solids are extracted with 12 M hydrochloric acid and analyzed. Detection limits for the methods are 0.05 μg 1^-1 in the soluble phase and 0.06 μg 1^-1 in the particulate phase.     

Determination of selenium in water by electrothermal atomic absorption spectrometry

Summary The electrothermal atomization of selenium has been investigated for the accurate determination of selenium in water samples. Hydrogen seriously affects the atomization temperature of selenium in a molybdenum micro-tube atomizer. The atomization of selenium also suffers from serious interferences caused by salts and other elements. The extraction of selenium diethyldithiocarbamate complex serves to eliminate the interferences from the matrix. The addition of copper allows the suppression of interferences from elements extracted with selenium. The method permits the determination of selenium(IV) and selenium(VI) separately.This research was in part funded by the Ministry of Education, Science and Culture, Japan, under Grant-in-Aid for Scientific Research, for which we express our appreciation.     

Determination of selenium in human tissues by atomic absorption spectrometry

A simple method is described for the determination of selenium in human tissues without the use of perchloric acid. Digestion with nitric and sulphuric acids is followed by hydride generation and atomic absorption spectrometry. Results for NBS bovine liver and IAEA horse kidney reference materials were in good agreement with assigned concentrations, as was also achieved with the perchloric acid digestion. Recovery of added selenium was >90%, and the relative standard deviation was 5.5% for within-batch and 6.9% for between-batch analyses. The values of selenium in heart tissue were 0.9–1.3 μg g^?1 dry weight.     

Determination of aluminium in silicon by electrothermal atomic absorption spectrometry

The sample is decomposed with hydrofluoric and nitric acids and the diluted solution is injected into the graphite furnace. For a 100-mg sample, the detection limit (3 σ) is 1.2 μg AI g^-1. The coefficient of variation is 3–13% for 9–7000 μg Al g^-1 in silicon.     

Determination of terbium and dysprosium by atomic absorption spectrometry

For the determination of terbium and dysprosium by atomic absorption spectrometry, the effects of several inorganic acids, metal ions and alcohols were studied. The two metals were determined in the presence of yttria and in rareearth oxides with satisfactory results.     

Determination of beryllium in urine by graphite-furnace atomic absorption spectrometry

A method has been developed for the determination of beryllium in urine by graphite-furnace atomic absorption spectrometry. Ammonium 12-molybdophosphate and ascorbic acid were employed as a matrix modifier. The tolerable charring temperature for beryllium in both aqueous solution and urine was raised to 1400 °C in the presence of a matrix modifier. The sensitivity for the determination of beryllium was also improved by a factor of 1.5 in comparison with that obtained by using magnesium nitrate as a matrix modifier. The mechanism of the enhancement effect of ammonium molybdophosphate was ascribed to the effectiveness of the formation of gaseous BeO, which is a precursor of free beryllium. Beryllium in urine can be determined simply by dilution with ascorbic acid solution. The relative standard deviation for seven replicate determinations of beryllium was 1.9% for a urine sample containing 0.029 μg ml^?1 of beryllium.     

Determination of thallium in soils by flame atomic absorption spectrometry

A method is described for the determination of Tl in soils by FAAS, involving extraction of Tl from 5 g of soil by digestion with HClO₄/HNO₃ followed by separation of the extracted Tl into 5 mL of diisopropylether from HBr solution, including Ce(SO₄)₂. Tl in the organic phase is determined by direct aspiration into the spectrophotometer. The percentage relative standard deviation (% RSD) for 5 replicate samples is about 1%. The detection limits (S/N = 3) of this method are 0.001 mg/L for aqueous solution and 0.02 mg/kg DW for soil, when 50 mL of soil solution corresponding to 2.5 g soil are used. The Tl concentration even of unpolluted soils can be determined. The method was shown to be unaffected by the presence of various ions in soil and was able to recover nearly 100% Tl added to soils. The arithmetic mean (range) of 18 Japanese unpolluted surface soils was 0.33 (0.10–0.56)mgTl/kg DW.     

Determination of vanadium in urine by electrothermal atomic absorption spectrometry

After wet ashing of the urine sample with nitric acid, vanadium is chelated with cupferron, extracted into 4-methylpentan-2-one and determined by atomic absorption spectrometry with a pyrolytically-coated graphite furnace atomizer. The sensitivity allows the precise determination of 1–500 μg V l^-1 in urine. The coefficient of variation for triplicate urine measurements is <8% for 10 μg V l^-1.     

流动注射-间接原子吸收法测定乌拉地尔

研究了乌拉地尔、Bi(Ⅲ)和KI形成的离子缔合物的性质，提出了流动注射-间接原子吸收法(FI-AAS)分析乌拉地尔的新方法。它是基于乌拉地尔在适当的酸度条件下与BiI4^-反应生成不溶于水的离子缔合物，经流动注射在线过滤稀释，以AAS法测定反应后剩余铋的量来间接测定乌拉地尔的含量。本文对原子吸收、流动注射的工作条件进行了优化，并使用内填微孔滤膜的柱形过滤器收集沉淀，使灵敏度大为提高。乌拉地尔的质量浓度在5-100μg／mL范围内与吸收值呈良好的线性关系，回收率为97.2％-100.8％，采样频率为100次／h。     

Determination of silica in geological materials by atomic absorption spectrometry

A simple rapid method for the routine determination of silica by atomic absorption spectrometry (a.a.s.) in a wide range of geological materials is described. Samples are decomposed by heating with hydrofluoric acid in closed containers and diluted gravimetrically. Large concentrations of free hydrofluoric acid are tolerated and the resulting solutions show excellent stability. No chemical interference was identified in the atomic absorption measurements. The technique was extended to the micro-determination of silica in samples of milligram size as well as trace-level silicon in waters. The average standard deviation is ?1% by the recommended method, 2.6% by the micro-method and 2–6% at trace level (20–0.5 ppm Si), respectively. The procedure described complements the a.a.s. scheme in current use for some 25 major and trace elements.     

Determination of antimony by using tungsten trap atomic absorption spectrometry

An electrically heated tungsten coil was used as a trap in the determination of antimony. The technique consists of three steps. Initially, SbH₃ is formed by hydride generation procedure; then the analyte species in vapor form are transported to W-coil trap heated at 370 °C. Following the preconcentration step, the trap is heated to 895 °C; analyte species are revolatilized and transported to the flame-heated quartz atom cell where atomization and the formation of signal take place. The experimental parameters were optimized both for trap and no-trap studies. The most important experimental parameters are concentrations of HCl and NaBH₄ solutions, H₂ and Ar gas flow rates, and collection and revolatilization temperatures of W-coil. Accuracy was tested using a certified reference material, waste water EU-L-1. Limit of detection for the system is 16 ng l^− 1 using a sample of 36 ml collected in 4.0 min. Enhancement factor in sensitivity was 17.     

石墨炉原子吸收测定模拟体液中的镍

人工关节置换手术的出现是外科手术治疗软骨病损的一次巨大的进步。但人工关节假体的后期松动是长期困扰其发展的难题。镍钛合金人工关节假体材料在体液中的腐蚀与磨损,以及磨损颗粒引起周围组织的异物反应,是造成晚期关节假体松动的主要原因。另一方面,镍钛合金植人体在体液腐蚀下释放的镍离子对人体有害,而且还可能致癌。因此,对镍钛合金进行表面改性,以提高其耐磨与耐腐蚀性能很有必要。