Some spectrofluorimetric applications of the cerium(IV)-cerium(III) system

Cerium(III) ions in dilute sulphuric acid medium exhibit a characteristic fluorescence which has its excitation maximum at 260 nm and its fluorescence emission maximum at 350 nm. By utilising the osmium-catalysed redox reaction between cerium(IV) and arsenic(III), microgram amounts of arsenic (7.5–37.5 μg) may be determined by spectrofluorimetric measurement of the ceriurm(III) produced. The principle may be applied to the determination of several other ions which cannot yet be determined by direct spectrofluorimetry, e.g.. Fe(II) (5.6–28 μg), oxalate (8.8–44μg). Osmium(VIII) (0.05–0.2 μg) and iodide (0.6–2.5 μg) may be determined by their catalytic action.     

Chemiluminescence determination of sodium 2-mercaptoethane sulfonate by flow injection analysis using cerium(IV) sensitized by quinine

A flow injection method with chemiluminescence (CL) detection is proposed for the determination of sodium 2-mercaptoethane sulfonate (MESNA), a drug often used to reduce the urotoxic effects of antineoplastic alkylating agents. The procedure is based on the reaction of the thiol with Ce(IV) in a sulfuric acid medium and measurement of the CL intensity produced by quinine used as a sensitizer. The optimum conditions for CL emission were investigated. Using the CL peak height as the analytical parameter, MESNA was determined over the concentration range 0.29–2.21 ng (1.97–9.85 μg·l⁻¹) with a detection limit of 0.21 ng (1.38 μg·l⁻¹) and a relative standard deviation (R.S.D.) of 4.1%. The method was applied satisfactorily to the determination of MESNA in pharmaceutical preparations with percentages of recovery between 94 and 105.     

Simultaneous determination of iron(II), iron(III), and titanium(IV) by flow injection analysis using kinetic spectrophotometry with Tiron

Summary Two flow injection analysis systems have been worked out for the simultaneous determination of Fe(III), Fe(II), and Ti(IV) based on the kinetic spectrophotometry with Tiron. The first system uses a silver reductor column and a single detector with two flow cells aligned in the same optical path to yield two peaks corresponding to (a) Ti(IV)-Tiron and (b) Ti(IV) plus total iron(III)-Tiron complexes. An another sample injection without the silver column yields a single peak which corresponds to Ti(IV) plus Fe(III)-Tiron complexes. With the two sample aliquot injections the system permits simultaneous determinations with throughput of 30 samples/h in the g to several tens g range of each species. The second system is a multidetection system with or without the silver reductor column using the same spectrophotometry with Tiron, in which the entrapment of the sample plug into a closed system allows its repetitive passage through a single detector. With the advantage of much simpler instrumentation, the system permits 6 samples/h to be analyzed for the three metal species with somewhat lower precisions than the first system.     

Catalytic-fluorimetric determination of EDTA and iron(III) by flow injection analysis

Summary In this paper the authors report on several methods for the direct determination of EDTA and indirect determination of iron(III), based on the inhibition effect of EDTA on the catalytic action of copper (II) on the oxidation of 2,2-dipyridyl ketone hydrazone by hydrogen peroxide and on the decrease of this inhibition effect in the presence of Fe(III), respectively. These methods allow the determination of EDTA in the ranges of 0.4–2.0 g · ml^–1 and 0.2–1.0 g · ml^–1 for the normal and reversed FIA modes, respectively, and of 40–240 ng · ml^–1 for Fe(III) by reversed FIA.

---

Katalytisch-fluorimetrische Bestimmung von EDTA und Eisen(III) durch FließinjektionsanalyseInhibitionsmethoden

Zusammenfassung Verfahren zur direkten Bestimmung von EDTA sowie zur indirekten Bestimmung von Eisen(III) werden beschrieben. Sie beruhen auf der Inhibitorwirkung von EDTA auf den katalytischen Effekt von Kupfer(II) bei der Oxidation von 2,2-Dipyridylketonhydrazon mit Wasserstoffperoxid bzw. auf der Schwächung dieser Inhibitorwirkung in Gegenwart von Eisen(III). Es ist mit diesen Methoden möglich, EDTA im Bereich von 0,4–2,0 g/ml (normale FIA) bzw. 0,2–1,0 g/ml (umgekehrte FIA) und Eisen im Bereich von 40–240 ng/ml (umgekehrte FIA) zu bestimmen.

     

Spectrofluorimetric determination of pharmaceutical compounds with the cerium(IV)—cerium(III) system

The compounds to be determined are oxidised by cerium(IV). The concentration of cerium(III) formed is measured spectrofluorimetrically. The method has been used both in solution and, by fluorodensitometry, on t.l.c. plates. Detection limits of some substances are 15 ng ml^-1 for the solution method and 5 ng per spot for the t.l.c. method.     

流动注射分光光度法同时测定Fe(Ⅱ)和Fe(Ⅲ)

将流动注射技术引入邻菲罗啉分光光度法测定Fe2+分析体系,采用单阀双带镀镉锌片还原柱带隔离的阀体流路,建立了同时测定微量Fe2+和Fe3+的分析方法。Fe2+的测定范围为0~10 mg/L,检出限为1.2×10-6mg/L;Fe3+的测定范围为0~12 mg/L,检出限为1.8×10-6mg/L。方法用于水中Fe2+和Fe3+的同时测定。     

Simultaneous determination of nitrate and nitrite by flow injection analysis

An automatic method for the simultaneous determination of nitrate and nitrite by flow injection analysis is described. Nitrate is reduced to nitrite with a copperized cadmium column. Nitrite is diazotized and coupled with N-(l-naphthyl)ethylenediammonium dichloride. The merging zones approach is used to minimize reagent consumption. The injector system is arranged so that two peaks are obtained, one corresponding to nitrite and the other to nitrite plus nitrate. A sampling rate of about 90 samples per hour is possible; the precision is better than 0.5% for nitrite in the range 0.1–0.5 mg l^t and 1.5% for nitrate in the range 1.0–5.0 mg l^t     

Flow injection spectrofluorimetric determination of iron(III) in water using salicylic acid

A simple and fast flow injection fluorescence quenching method for the determination of iron in water has been developed. Fluorimetric determination is based on the measurement of the quenching effect of iron on salicylic acid fluorescence. An emission peak of salicylic acid in aqueous solution occurs at 409 nm with excitation at 299 nm. The carrier solution used was 2 × 10⁻⁶ mol L⁻¹ salicylic acid in 0.1 mol L⁻¹ NH₄⁺/NH₃ buffer solution at pH 8.5. Linear calibration was obtained for 5–100 μg L⁻¹ iron(III) and the relative standard deviation was 1.25 % (n = 5) for a 20 μL injection volume iron(III). The limit of detection was 0.3 μg L⁻¹ and the sampling rate was 60 h⁻¹. The effect of interferences from various metals and anions commonly present in water was also studied. The method was successfully applied to the determination of low levels of iron in real samples (river, sea, and spring waters).     

Determination of cerium(III) and cerium(IV) in nanodisperse ceria by chemical methods

Percentages of different valence cerium species have been determined in powdery samples, redispersible compositions, and aqueous sols of nanodisperse ceria prepared from cerium(IV) and cerium(III) salts by various methods with or without organic stabilizers. Cerium(III) is shown to be virtually absent in nearly all of the CeO₂ samples studied. Organic stabilizers are shown to be capable of reducing cerium(IV) in aqueous CeO₂ sols.     

Simultaneous spectrophotometric determination of nitrite and nitrate by flow injection analysis

The flow injection principle is used in the photometric determination of nitrite and nitrate with sulfanilamide and N-(1-naphthyl)ethylenediamine as reagents. An on-line copper-coated cadmium reductor reduces nitrate to nitrite. The detection limit is 0.05 μM for nitrite and 0.1 mM for nitrate at a total sample volume of 200 μM. Up to 30 samples can be analyzed per hour with a relative precision of ca. 1%.     

Simultaneous enzymatic determination of methanol and ethanol by flow injection analysis

A differential-kinetic enzymatic method for the resolution of methanol-ethanol mixtures based on the use of a reactor containing alcohol oxidase immobilized on controlled-pore glass is proposed. The method also involves the aldehyde/p-rosaniline/sulfite-coupled reaction and a twofold halting of the flow (in the enzymatic reactor to favor the oxidation reaction and in the detector flow cell to perform kinetic measurements) per sample assayed. The determination range is between 10 and 60 and 10 and 300 μg/ml for methanol and ethanol, respectively. Equations of the calibration curves for the mixtures have been derived where the concentration of each analyte is a function of the absorbance monitored at different stop times in the detector.     

Spectrofluorimetric kinetic determination of selenium (IV) by flow injection analysis in cationic micellar medium

A sensitive catalytic kinetic spectrofluorimetric method for determining ng ml(-1) of selenium by flow injection analysis has been developed. The method, based on the catalytic effect of Se (IV) on the reduction of resorufin by sulphide, in the presence of cetylpyridinium chloride, is monitored spectrofluorimetrically (lambda(ex)=480 nm; lambda(em)=583 nm). The linearity range of the calibration graph is dependent on the concentration of sulphide. The variables affecting the rate of the reaction were investigated. The method is simple, rapid, precise, sensitive, and widely applicable. The limit of detection is 1 ng ml(-1) Se (IV), and the calibration range is 5-1000 ng ml(-1). Sampling rate is 60 samples h(-1), and the relative standard deviation of 12 determinations of 100 ng ml(-1) Se was 0.76%. The determination of Se (IV) in the presence of Se (VI) and total selenium is described. The method was applied to the determination of Se in selenium tablets, and several synthetic samples.     

Indirect spectrophotometric determination of cerium(IV)

A simple and very fast photometric method for the determination of trace levels of cerium(IV) has been developed. Use has been made of the reaction in which iron (II), on oxidation with cerium(IV), gives iron(III) which is complexed with tiron, in acidic medium, to form a stable blue color, the intensity of which is in direct proportion to the amount of cerium(IV) originally present in the sample solution. In addition, the method has a wide range of determination and reasonable sensitivity, and it avoids both temperature control and the tedious extraction step.     

Amperometric ascorbimetric determination of cerium(IV) and Iron(III) with two polarized electrodes

Summary Amperometric ascorbimetric determinations of cerium(IV) and ferric iron have been carried out at 50°C with two polarized electrodes at 200 and 100 mV respectively. The results obtained are fairly accurate and precise within ±1.0 per cent. A simple method for successive determination of cerium and iron has been developed; and conditions for such estimations have been established. At an acidity of 2.5 M with respect to sulphuric acid, it is possible to ward off the reduction of ferric iron and thereby cerium(IV) is successfully titrated with ascorbic acid in this medium. After completion of the reaction and then lowering the acid concentration to p_H 1.5 with aid of ammonium hydroxide, Fe^III is titrated with standard ascorbic acid yielding good results.     

Simultaneous spectrophotometric determination of nitrite and nitrate by flow injection analysis.

A new catalytic spectrophotometric method is reported for the simultaneous determination of nitrite and nitrate by flow injection analysis, based on the catalytic effect of nitrite on the redox reaction between pyrogallolsulfonephthalein and potassium bromate in acidic media. Nitrate can also be on-line reduced to nitrite with a modified copper-coated cadmium reduction column. The reaction was monitored spectrophotometrically by measuring the decrease in the absorbance of pyrogallolsulfonephthalein at 465 nm. Various analytical parameters such as effects of acidity, reagent concentrations, flow rates, sample sizes, lengths of the reaction coil and temperatures were studied and were optimized. Under the optimized conditions, the calibration graph was linear for 2.4 to 160 ng ml(-1) of nitrite and 4.0 to 100 ng ml(-1) of nitrate. The influences of potential interfering cations and anions for nitrite and nitrate determination were studied. The method is successfully applied for food and water samples. Up to ten samples can be analyzed per hour.     

Sensitive and ultra-fast determination of arsenic(III) by gas-diffusion flow injection analysis with chemiluminescence detection

A novel chemiluminescence gas-diffusion flow injection system for the determination of arsenic(III) in aqueous samples is described. The analytical procedure involves injection of arsenic(III) samples and standards into a 0.3 mol L⁻¹ hydrochloric acid carrier stream which is merged with a reagent stream containing 0.2% (w/v) sodium borohydride and 0.015 mol L⁻¹ sodium hydroxide. Arsine, generated in the combined carrier/reagent donor stream, diffuses across the hydrophobic Teflon membrane of the gas-diffusion cell into an argon acceptor stream and then reacts with ozone in the flow-through chemiluminescence measuring cell of the flow system. Under optimal conditions, the method is characterized by a wide linear calibration range from 0.6 μg L⁻¹ to 25 mg L⁻¹, a detection limit of 0.6 μg L⁻¹ and a sample throughput of 300 samples per hour at 25 mg L⁻¹ and 450 samples per hour at 25 μg L⁻¹.     

Simultaneous determination of uranium(IV) and thorium(IV) ions with Arsenazo III by partial least squares method

A multivariate calibration method, Partial Least Squares Type 1 (PLS-1), is proposed for simultaneous spectrophotometric determination of uranium and thorium ions as their complexes with arsenazo III in hydrochloric acid medium. Several data characteristics are taking into account in order to minimize the optimum number of factors required for the construction of calibration model, while using various statistical criterions of selection. Finally, the evaluated calibration model is satisfactorily applied to determination of these ions in samples that resemble sulfuric acid leach solution obtained from a uranium ore.     

On the determination of cerium(IV) by iodate and bromate

Analytical and Bioanalytical Chemistry - Determination of cerium(IV), based upon its reduction by a measured excess of KSCN solution and titration of the excess against standard iodate or bromate,...     

Iridium(III) catalyzed oxidation of cyclic ketones by cerium(IV)

IrCl₃which is considered to be a sluggish catalyst in alkaline media, was found to surpass the catalytic efficiency of even osmium and ruthenium in acidic media in the oxidation of cyclopentanone and 2-methylcyclohexanone by cerium(IV) sulphate in aqueous sulphuric acid medium. It was observed that the order of the reaction shows direct proportionality with respect to low concentrations of the oxidant and alcohols, but tends to become independent of concentration at higher concentrations. On increasing the concentrations of externally added Cl^-, H⁺ and Ce^IIIions, the rate of the reaction decreases sharply initially but the decrease in rate becomes less prominent as their concentration is increased. The rate of reaction is directly proportional with respect to IrCl₃concentrations. Kinetic data suggest that the production of Ce^III ion occurs before the rate-determining step. Parameters such as the energy of activation, free energy of activation and entropy data collected at five different temperatures suggest that cyclopentanone forms the activated complex more easily.