A green,efficient and recyclable poly(4-vinylpyridine)-supported copper iodide catalyst for the synthesis of coumarin derivatives under solvent-free conditions

Poly(4-vinylpyridine)-supported copper iodide is reported as a green, efficient and recyclable catalyst for the synthesis of coumarin derivatives by the Pechmann reaction under solvent-free conditions. This catalyst can be recovered by simple filtration and recycled up to eight consecutive runs without any loss of their efficiency.     

Adsorption of metal ions on crosslinked poly(4-vinylpyridine) resins prepared with a metal ion as template

Poly(4-vinylpyridine) (PVP) was crosslinked with 1,4-dibromobutane with a metal ion as template. The adsorption behavior of copper, cobalt, zinc, and cadmium ions on the obtained resin (DBQP) was studied. The DBQP resin prepared with a metal ion as template preferentially adsorbed the metal ion used as template. The stability constant of the copper complex of DBQP was largest for the DBQP resin prepared with a copper ion as template, which was due to its large entropy change for the complexation.     

Poly(4-vinylpyridine)：As a green, efficient and commercial available basic catalyst for the synthesis of chromene derivatives

Poly(4-vinylpyridine) is reported as a green,commercial available and efficient basic recyclable catalyst for the synthesis of chromene derivatives.This catalyst can be easily recovered by simple filtration and recycled up to 5 consecutive runs without any loss of its efficiency.     

Solid-state polymerization of vinylpyridine coordination compounds

A survey of the solid-state polymerizability of 2- and 4-vinylpyridine (Vpy) complexes of divalent cobalt, nickel, copper, and zinc chlorides has been carried out. The influence of metal ion, ligand, coordination stereochemistry, and crystal structure is discussed. The tetrahedral modification of the complex Co(4-Vpy)₂Cl₂ has been found to undergo a particularly facile thermal polymerization below its melting point to yield high molecular weight poly-4-vinylpyridine. The polymer is shown to be conventional atactic head-to-tail poly-4-vinylpyridine. Thermogravimetric methods and optical microscopy have been used to study the thermal polymerization of single crystals of the complex. Results indicate a diffusion-controlled mechanism in which defective regions in the crystal act as nuclei for the polymerization.     

硅胶负载聚乙烯吡啶-聚[苯乙烯-顺丁烯二酸]-钯催化剂的结构研究

利用X-光电子能谱、紫外-可见光谱、电子显微镜等技术研究了硅胶负载的聚乙烯吡啶-聚[苯乙烯-顺丁烯二酸]-钯催化剂的结构.发现催化剂中活性组分除钯(0)外,还存在少量钯(Ⅱ).第二种高分子的存在可以影响钯(Ⅱ)的相对含量.催化剂中钯以很小的粒子均匀分布在载体上,因此具有良好的催化加氢性能.     

Synthesis and antibacterial activity of copper-immobilized membrane comprising grafted poly(4-vinylpyridine) chains

Poly(4-vinylpyridine) (P4VP) brushes were grafted onto microporous polysulfone (PSF) membranes via surface-initiated atom transfer radical polymerization (SI-ATRP) and then immobilized copper (II) ions on the modified membrane. Copper-loaded membranes exhibited excellent antibacterial properties with the added advantage of repeated use. The chemical composition and surface morphology of the functionalized membrane was characterized by ATR-FTIR, XPS, SEM, and AFM. The results showed that P4VP brushes clustered to rod-shaped covering and the sub-layer of membrane maintained sponge-like structures at the same time. Additionally, the kinetic study of SI-ATRP reaction revealed that the chain length of P4VP brushes increased linearly as the polymerization time increased. The antibacterial effects of copper-loaded CMPSF-g-P4VP membrane against Escherichiacoli were examined and the antibacterial efficiency reached 100% when 2.49wt.% of copper (II) ions was immobilized on membrane. The presented results could serve as a good starting point for the fabrication of antibacterial CMPSF membranes for waste-water treatment applications.     

New quaternized poly(4-vinylpyridine-co-divinylbenzene) material containing nickel(II) Schiff base complex: synthesis,thermogravimetry, and application for heterogeneous electrooxidation of ethanol

Research on Chemical Intermediates - Poly(4-vinylpyridine) crosslinked by 2 % divinylbenzene was partially quaternized (20 % monomer equivalents) by a bidentate Schiff base nickel...     

SYNTHESIS AND CHARACTERIZATION OF POLY(STYRENE-co-4-VINYLPYRIDINE) NEODYMIUM COMPLEX

Poly(styrene-co-4-vinylpyridine)-neodymium complexes(NdCl_3·PS4VPY)with variouscontents of the functional group and neodymium have been prepared and characterized.Theinfrared and X-ray photoelectron spectra indicate that uncoordinated 4-vinylpyridine(4VPY)unitsremain in the NdCl_3·PS4VPY complexes.The catalytic behaviour of NdCl_3·PS4VPY was described briefly.     

Enhancement of retentivity and selectivity for PAHs in NP-HPLC by high-density immobilization of poly(4-vinylpyridine) as an organic phase on silica.

Poly(4-vinylpyridine)-modified silica with high grafting density have been prepared by a grafting-from (g-from) approach through radical chain-transfer reactions. The widely used silane coupling agent 3-mercaptopropyltrimethoxysilane was used to prepare thiol-terminated silica. Chain-transfer reaction and polymerization of 4-vinylpyridine was carried out using alpha,alpha'-azobisisobutyronitrile as an initiator. Thiol-terminated silica and polymer-modified silica were both characterized qualitatively and quantitatively. The quantification of the organic phase has been done by thermogravimetric analysis and elemental analysis. Thus, the modified silica was used as a packing material and the retention behavior of polycyclic aromatic hydrocarbons (PAHs) was studied in normal-phase high-performance liquid chromatography. Results were compared with those of poly(4-vinylpyridine)-modified silica prepared by a grafting-to (g-to) approach. Commercially available aminopropyl-bonded silica and bare silica columns were also used as reference columns. The column of poly(4-vinylpyridine)-grafted silica prepared by the g-from method, having higher grafting density, provided the better retentivity and selectivity for PAHs compared to the other reference columns.     

Preparation and structural characterization of polymer-supported methylrhenium trioxide systems as efficient and selective catalysts for the epoxidation of olefins

Novel heterogeneous compounds of methylrhenium trioxide (MTO) were prepared with poly(4-vinylpyridine) and polystyrene as polymeric supports. The wide-angle X-ray diffraction (WAXS.) analysis, performed by the application of the difference method, showed, in a representative case of the poly(4-vinylpyridine)/MTO derivatives, a slightly distorted octahedral conformation on the metal's primary coordination sphere. The Re-O and Re-C bond distances were not influenced by the polymeric nature of the ligand, while the Re-N bond distance was abnormally shorter than those previously observed for homogeneous MTO/L(n) complexes, showing a strong coordination of the rhenium atom to the support. A set of scanning electron microscopy (SEM) photographs showing the morphology of the surface of particles of poly(4-vinylpyridine)/MTO and polystyrene/MTO systems are reported. The reticulation grade of the polymer was a crucial factor for the morphology of the particles surface. Poly(4-vinylpyridine) 2% cross-linked systems were characterized by particles with very irregular shape and surface. Poly(4-vinylpyridine) 25% cross-linked systems showed particles with regular spherical shape, which morphology was similar to microcapsules obtained with polystyrene. All novel MTO compounds were efficient and selective heterogeneous catalysts for the epoxidation of olefins using environmentally friendly H2O2 as oxygen atom donor. The catalyst activity was maintained for at least five recycling experiments.     

Synthesis of poly(styrene-tetrahydrofuran-2-methyl-2-oxazoline) triblock and graft copolymers

Poly[styrene (ST)-tetrahydrofuran (THF)-2-methyl-2-oxazoline(MeOz)] triblock and graft copolymers were prepared by ionic polymerizations. Poly(ST-THF) graft copolymers were synthesized by coupling of ST-4-vinylpyridine (4VP) copolymer with a large excess of PTHF dication. The ion coupling of PST dianion with PTHF dication was accompanied by the side reaction (abstraction of α proton of oxonium ion). After tosylation of terminal hydroxyl groups of PTHF blocks, cationic copolymerizations of MeOz with poly(ST-THF) block and graft copolymers were carried out, and characteristics of produced copolymers were investigated in some detail.     

Synthesis of poly(4-vinyl pyridine-b-methyl methacrylate) by MAMA-SG1 initiated sequential polymerization and formation of metal loaded block copolymer inverse micelles

Well-defined poly(4-vinylpyridine) (P4VP) was synthesised by nitroxide-mediated radical polymerization using the BlocBuilder MAMA-SG1. The controlled character of the polymerization was confirmed by kinetic measurements and linear increase of the molar mass with monomer conversion. Poly(4-vinylpyridine) terminated with SG1 was then used as macroinitiator and chain extended to form poly(4-vinylpyridine-b-methyl methacrylate) and poly(4-vinylpyridine-b-(methyl methacrylate-co-styrene)) block copolymers. These block copolymers spontaneously organized into spherical inverse micelles in THF with critical micelle concentrations of 0.1 mg/mL for poly(4VP₁₉₀-b-MMA₉₁) and 0.01 mg/mL for poly(4VP₁₉₀-b-(MMA₅₇-co-S₁₈)) and sizes of 70 and 130 nm (DLS), respectively. The inverse micelles were loaded with copper(II)acetate leading to a slight increase in micelle size. The uniform structure of the inverse micelles was confirmed by FeSEM images, while the presence of copper in the micelle core was established by energy-dispersive X-ray spectroscopy (EDX) and FTIR spectroscopy.     

聚(4-偶氮磺酸苯乙烯-co-4-乙烯基吡啶)与本征态聚苯胺的氢键自组装及其光电转换性能

合成了一种新的共聚体——聚(4-偶氮磺酸苯乙烯-co-4-乙烯基吡啶), 它含有吡啶环, 能作为氢受体与本征态聚苯胺进行氢键自组装. 在紫外光照下, 组装膜通过偶氮磺酸基的光解, 形成稳定的共价交联结构, 在电解质水溶液中也不被破坏, 可用作光电转换膜, 并能在盐水溶液中直接测定它的光电流. 结果表明含有本征态聚苯胺的自组装膜是一种良好的光电转换材料.     

Selective metal sorption on cross-linked poly(vinylpyridine) resins

The sorption behaviour of several metal ions on five kinds of poly(4- or 2-vinylpyridine) resins, cross-linked with divinylbenzene, and with different surface properties, are examined. All the resins proposed sorb some metal ions effectively in a similar manner by anion-exchange, while the sorption of metal ions by complex formation with the pyridine moiety is strongly affected by the surface properties of the resins. A macroreticular poly(4-vinylpyridine) resin shows high affinity for copper and nickel ions in acetate buffer. Sodium chloride and/or methanol added to the working solutions influence the sorption capacities for metal ions. This resin was applied to the separation of copper/cobalt and nickel/cobalt and the concentration of copper from sea-water by a column operation.     

Self-assembled Films of Poly(4-diazosulfonate Styrene-co-4-vinylpyridine) with Polyaniline and Their Photoelectric Conversion Properties

Poly(4-diazosulfonate styrene-co-4-vinylpyridine) (P(DSS-co-VP)) can self-assemble (SA) with polyaniline via H-bond interaction. The SA film was then photo-crosslinked under UV irradiation to form a covalent crosslinking structure. The photocurrent of the crosslinked SA films was determined directly in aqueous salt solution. The results showed that the polyaniline SA films were materials with good photoelectron conversion properties.     

Poly(styrene) coating of monodispersed colloidal metal oxides by grafting to hydrophilic macromer adsorbed on the surface

Poly(styrene) (PST) coatings of monodispersed colloidal metal oxide particles by surface grafting to poly(N-vinyl-2-pyrrolidone) (ST–PVP) or quaternized poly(4-vinylpyridine) (ST-PVPy(Me)) macromer, having a vinylphenylene end group, were investigated. Radical polymerization of styrene (ST) in ethanolic silica colloid in the presence of ST-PVP successfully led to the formation of monodispersed PST/PVP copolymer/SiO₂composites. The addition of divinylbenzene (DVB) to the reaction system gave SiO₂ composites coated with crosslinked PST. Graft-polymerization of ST to ST-PVP also took place on TiO₂, CeO₂ and Al(OH)₃ colloidal particles in ethanolic solution. However, ST-PVPy(Me) adsorbed on colloidal silica did not effectively graft PST.     

硅胶负载的双高分子-钯催化剂的研究——Ⅰ.硅胶负载的聚[4(2)-乙烯吡啶]-聚[苯乙烯-顺丁烯二酸]-钯催化剂的合成及其催化加氢性能

合成了硅胶负载的聚(4-乙烯吡啶)或聚(2-乙烯吡啶)-聚(苯乙烯-顺丁烯二酸)-钯催化剂(P4VP-PSM-Pd/SiO_2和P2VP-PSM-Pd/SiO_2),研究了合成条件、组成等对其催化性能的影响及对丙烯酸甲酯的催化加氢性能。发现,同时含两种高分子的催化剂比只含一种高分子的催化剂具有较高的催化活性,催化剂在常温常压下对丙烯酸甲酯的氢化反应具有很高的催化活性和选择性,且能重复使用,表现出良好的稳定性。同时还研究了其它因素对催化剂性能的影响。     

Crosslinked and quaternized poly(4-vinylpyridine)/polypyrrole composite as a potential candidate for the detection of low humidity

Poly(4-vinylpyridine) was crosslinked and quaternized with 1,4-bromobutane to form a polyelectrolyte humidity sensitive film on an interdigitated gold electrode, which was further coated with a layer of polypyrrole by a facile method of vapor phase polymerization. The composite so prepared was characterized by UV-vis spectroscopy and scanning electron microscopy. The investigations on the humidity sensitive properties of the composite revealed that it exhibited an impedance as low as 10(5) Omega even at 0%RH due to the existence of intrinsic conducting polypyrrole, thus conquering the difficulties in measuring low humidity with resistive-type humidity sensors. The impedance of the composite changed linearly with humidity in the range of 0-60%RH with good sensitivity. In addition, its response time (t(90%)) for adsorption and desorption between 33% and 97%RH was estimated to be 33 s and 110 s, respectively, and a hysteresis of 5%RH was observed. All these suggest it is promising as a sensitive material for low humidity detection. The effect of concentration and ratio of oxidizing agent to doping agent, polymerization temperature of pyrrole on the humidity sensitive properties of the composite have been investigated. A sensitive mechanism of the composite was proposed by taking into account the contribution of both the intrinsic electronic conduction and ionic conduction.     

硅胶负载的双高分子-钯催化剂的研究——Ⅰ.硅胶负载的聚[4(2)-乙烯吡啶]-聚[苯乙烯-顺丁烯二酸]-钯催化剂的合成及其催化加氢性能

 合成了硅胶负载的聚(4-乙烯吡啶)或聚(2-乙烯吡啶)-聚(苯乙烯-顺丁烯二酸)-钯催化剂(P4VP-PSM-Pd/SiO₂和P2VP-PSM-Pd/SiO₂),研究了合成条件、组成等对其催化性能的影响及对丙烯酸甲酯的催化加氢性能。发现,同时含两种高分子的催化剂比只含一种高分子的催化剂具有较高的催化活性,催化剂在常温常压下对丙烯酸甲酯的氢化反应具有很高的催化活性和选择性,且能重复使用,表现出良好的稳定性。同时还研究了其它因素对催化剂性能的影响。     

Aqua-mediated multicomponent synthesis of various 4H-pyran derivatives catalyzed by poly(4-vinylpyridine)-supported copper iodide nanoparticle catalyst

Research on Chemical Intermediates - A green and efficient approach for synthesis of some new 4H-pyran derivatives is reported, catalyzed by green recyclable poly(4-vinylpyridine)-supported copper...