Constrained geometry complexes of titanium (IV) and zirconium (IV) involving cyclopentadienyl fused to thiophene ring

Constrained geometry complexes (CGCs) of titanium (IV) and zirconium (IV) containing isomeric cyclopentadienyls fused to thiophene fragment, i.e., 4,5-dimethylcyclopenta[b]thienyl and 5,6-dimethylcyclopenta[b]thienyl, have been prepared and unambiguously characterized. The molecular structure of the titanium complex [η⁵-(5,6-dimethylcyclopenta[b]thienyl)SiMe₂(N^tBu)-η¹]TiCl₂ was established by X-ray crystal structure analysis. Preliminary studies showed that the studied CGCs/MAO are active olefin polymerization catalysts.     

Differential spectrophotometric determination of micro amounts of metal ions in mixtures

A differential spectrophotometric method is described for the simultaneous determinations of iron and molybdenum, iron and titanium, iron and uranium, molybdenum and titanium, and molybdenum and uranium in mixtures, in a single solution at room temperature. The general method consists in treating the mixture with 5 ml of 1 M sodium acetate and 1 ml of 1% pyrocatechol in 25-ml volumetric flasks. The optical density of color of mixed complexes is determined at the corresponding pair of wavelengths suggested. From the optical density and molar extinction coefficient, the concentration of each ion in mixtures has been calculated. By this procedure, the metal ions can be determined even if they differ by large ratios. Procedures have been extended for the analysis of mixtures containing iron, molybdenum, and titanium (or uranium). These procedures can be applied for the analysis of any type of materials, like minerals, rocks, ores, alloys, steels and refractory materials. Spectra of each complex and their Beer's law were studied in detail. Experiments were also made to show that the calculated and observed optical density of mixture complexes is the same, thereby the additive of optical density of mixtures at each pair of wavelengths suggested for individual determinations of ions have been verified.     

Solid phase extraction and preconcentration of uranium(VI) and thorium(IV) on Duolite XAD761 prior to their inductively coupled plasma mass spectrometric determination

A simple and effective method is presented for the separation and preconcentration of thorium(IV) and uranium(VI) by solid phase extraction on Duolite XAD761 adsorption resin. Thorium(IV) and uranium(VI) 9-phenyl-3-fluorone chelates are formed and adsorbed onto the Duolite XAD761. Thorium(IV) and uranium(VI) are quantitatively eluted with 2 mol L⁻¹ HCl and determined by inductively coupled plasma-mass spectrometry (ICP-MS). The influences of analytical parameters including pH, amount of reagents, amount of Duolite XAD761 and sample volume, etc. were investigated on the recovery of analyte ions. The interference of a large number of anions and cations has been studied and the optimized conditions developed have been utilized for the trace determination of uranium and thorium. A preconcentration factor of 30 for uranium and thorium was achieved. The relative standard deviation (N = 10) was 2.3% for uranium and 4.5% for thorium ions for 10 replicate determinations in the solution containing 0.5 μg of uranium and thorium. The three sigma detection limits (N = 15) for thorium(IV) and uranium(VI) ions were found to be 4.5 and 6.3 ng L⁻¹, respectively. The developed solid phase extraction method was successively utilized for the determination of traces thorium(IV) and uranium(VI) in environmental samples by ICP-MS.     

Microanalysis with the aid of ion-exchange resins : Part XX1. Detection of nanogram amounts of titanium(IV) with tiron

A sensitive test for nanogram quantities of titanium(IV) is proposed. A resin spot test technique is applied to the colour reaction of titanium(IV) with tiron. The limit of identification is 26 ng of titanium(IV) (1:1.5·10⁶) after 50 min standing. Vanadium(V), chromium(VI), molybdenum(VI) and uranium(VI) interfered seriously. Iron(III) could be masked with EDTA, and iron(III) and titanium (IV) were detected simultaneously.     

Effects of side-chains ofN-acetylamino acids on the structures of their triphenyltin(IV) complexes

Triphenyltin(IV) complexes ofN-acetylglycine,N-acetyl-L-leucine,N-acetyl-L-asparagine andN-acetyl-L-tyrosine were prepared by two methods and characterized by means of different spectroscopic methods (FTIR, multinuclear,¹H,¹³C and¹¹⁹Sn NMR and¹¹⁹Sn Mössbauer). The spectroscopic data indicated that theN-acetylglycine complex adopts a trigonal-bipyramidal structure in which the monodentate carboxylate and the amide-C=O group are bound to the same organotin(IV) moiety. The other three complexes are linear oligomers in which the planar Ph₃Sn(IV) is coordinated axially by a monodentate carboxylate and an amide-C=O from two different ligands. At theC-terminal end of the oligomer chain there is a tetracoordinated tin(IV) with a monodentate carboxylate as donor group.     

Spectrophotometric Determination of Rhenium(IV) with Thiocyanate,TX-100 and N,N′-Diphenylbenzamidine

A spectrophotometric method to determine rhenium(IV) at trace level is based on the extraction of Re(IV)-SCN^? complex in sulphuric acid media with N,N′-diphenylbenzamidine(DPBA) in presence of a non-ionic surfactant triton X-100 (TX-100) in chloroform. The complex shows maximum absorbance at 435 nm with amolar absorptivity value of 4.24 × 10⁴ L mol^?1 cm^?1 at an acidity range 3.5-6.5 M H₂SO₄. The method followed Beer's Law for the system Re(IV)-SCN^?(TX-100)-DPBA upto 4.0 μg Re(IV) mL^?1. The detection limit of the method is 5 ppb. None of the tested foreign ions, except molybdenum(VI), interfere with the determination of rhenium. The interference due to molybdenum could effectively be removed by prior precipitation with oxine. The effect of various analytical parameters on the extraction of the metal are discussed.     

Synthesis and structure determination of a stable organometallic uranium(v) imine complex and its isolobal anionic U(IV)-ate complex

The reaction of one equivalent of Cp*₂UCl₂ with 2-(trimethylsilylimino)-1,3-di-tert-butylimidazoline in boiling toluene afforded a one electron oxidation of the uranium metal and the opening of the N-heterocyclic ring, resulting in the formation of an organometallic uranium(V) imine complex. This complex crystallized with one molecule of toluene in the unit cell, and its solid-state structure was determined by X-ray diffraction analysis. When the same reaction was performed in perdeuterated toluene, a myriad of organometallic complexes were obtained, however, when equimolar amounts of water were used in toluene, the same complex was obtained, and its solid state characterization shows two independent molecules in the unit cell with an additional water molecule. For comparison of the geometric parameters, the corresponding isolobal anionic uranium(IV) complex [Cp*₂UCl₃]^? was synthesized by the reaction of Cp*₂UCl₂ with 1,3-di-tert-butylimidazolium chloride, and the resulting U(IV)-ate complex was characterized by X-ray diffraction analysis.     

Coordination and Redox Isomerization in the Reduction of a Uranium(III) Monoarene Complex

Synthetic studies on the redox chemistry of trivalent uranium monoarene complexes were undertaken with a complex derived from the chelating tris(aryloxide)arene ligand (^Ad,MeArO)₃mes^3?. Cyclic voltammetry of [{(^Ad,MeArO)₃mes}U^III] ( 1 ) revealed a nearly reversible and chemically accessible reduction at ?2.495 V vs. Fc/Fc⁺—the first electrochemical evidence for a formally divalent uranium complex. Chemical reduction of 1 indicates that reduction induces coordination and redox isomerization to form a uranium(IV) hydride, and addition of a crown ether results in hydride insertion into the coordinated arene to afford uranium(IV) complexes. This stoichiometric reaction sequence provides structural insight into the mechanism of arene functionalization at diuranium inverted sandwich complexes.     

The determination of uranium by cathode-ray polarography

The determination of uranium in the concentration range 2.10^-6–4.10^-3M has been studied by using both conventional and cathode-ray polarography, The prefeircd supporting electrolyte is 1 M perchloric acid, molybdenum is the only element which will cause serious interference at levels of the saine order as that of the uranium.     

Spectrophotometric method for the determination of microgram amounts of titanium using an extraction technique with diphenylglyoxal bis(2-hydroxybenzoylhydrazone)

Diphenylglyoxal bis(2-hydroxybenzoylhydrazone) forms an orange-yellow complex with titanium(IV) in weakly acid solution. This complex can be extracted into benzyl alcohol in 0.1 N sulfuric acid medium. In this solvent the extracted complex exhibits an absorption maximum at 500 nm with a molar absorptivity of 1.5 × 10⁴M^?1 cm^?1. Job's method and the molar ratio method indicate a 1:3 stoichiometric ratio. The interferences have been investigated and the reagent has been used successfully for the determination of titanium in minerals and alloys.     

Novel titanium complexes bearing two chelating phenoxy‐imine ligands and their catalytic performance for ethylene polymerization

Three substituted salicylaldimine ligands ( 1a, 2a, 3a ) and their titanium complexes bis[N‐(5‐nitrosalicylidene)‐2,6‐diisopropylanilinato]titanium(IV)dichloride ( 1 ), bis[N‐(5‐chlorosalicylidene)‐2,6‐diisopropylanilinato]titanium(IV)dichloride ( 2 ) and bis[N‐(5‐bromosalicylidene)‐2,6‐diisopropylanilinato]titanium(IV)dichloride ( 3 ) were synthesized and characterized by mass spectra, ¹H NMR and elemental analyses, as well as complex 1 by X‐ray structure analysis. In the presence of methylaluminoxane (MAO), 1, 2 and 3 are efficient catalysts for ethylene polymerization in toluene. Under the conditions of T = 60 °C, p = 0.2 MPa, and n(MAO)/n(cat) = 1500, the activities of 1–3 reached 4.55–8.80 × 10⁶ g of PE (mol of Ti h bar)^?1, which is much higher than that of the unsubstituted complex bis[N‐(salicylidene)‐2,6‐diisopropylanilinato]titanium(IV)dichloride ( 4 ). The viscosity‐average molecular weight of polyethylene ranged from 24.8 × 10⁴ to 44.9 × 10⁴ g/mol for 1–3 and the molecular weight distribution M_w/M_n from 1.85 to 2.34. The effects of reaction conditions on the polymerization were examined in detail. The increase in ethylene pressure and rise in polymerization temperature are favorable for 1–3 /MAO to rise the catalytic activity and the molecular weight of polyethylene. Copyright © 2007 John Wiley & Sons, Ltd.     

Preparation and 1H NMR study of complexes of trimethylplatinum(IV) with some tridentate schiff base ligands containing,N, O,and S donor atoms

The Schiff base ligands I–V, made by condensing either 2-acetylpyridine (I), 8-quinolinecarboxaldehyde (II and III), or o-methylthiobenzaldehyde (IV and V) with either N,N′-dimethyl-1,3-diaminopropane (I, II, and IV), 2-aminomethylpyridine (III), or 2-(2-aminoethyl)-pyridine (V), give ionic Pt^IVMe₃ complexes containing tridentate NNN- or SNN-bonded ligands. With PtMe₃Br ligand V gives a neutral complex XI in which it is coordinated only via the two N atoms. A monomeric Pt^IVMe₃ salicyladiminate complex results on treating the dimeric trimethylplatinum(IV) salicylaldehyde complex with the bidentate amine H₂N (CH₂)₃NMe₂. The complexes have been fully characterised by ¹H NMR spectroscopy.     

A scheme for the analysis of monazite and monazite concentrates

A scheme using ion-exchange methods is described for the analysis of monazites and monazite concentrates. The sample is opened up with concentrated sulphuric acid, and the resultant solution is applied to a column of Zeocarb 225 resin. After phosphate has been washed out, lead, aluminium, titanium, iron, uranium, calcium and magnesium are eluted with N hydrochloric acid and determined by specific, mainly spectrophotometric, methods. Rare earth elements are eluted with 3 N hydrochloric acid. Cerium is separated from the other rare earths by solvent extraction of its nitrate with methyl iso-butyl ketone; both groups are determined gravimetrically. Thorium is eluted from the ion-exchange resin with 3.6 N sulphuric acid and determined spectrophotometrically with thorin.The sulphuric acid-insoluble minerals are brought into solution by a double fusion method, and the determinations are carried out by a combination of ion-exchange and photometric procedures. Silica, phosphorus pentoxide, tin and chromium are determined by photometric methods, using separate portions of the sample.Lanthanum, yttrium and ytterbium are determined in a 1 M perchloric acid solution of the mixed rare earth oxides (less cerium) using flame photometry. Samarium, praseodymium and neodymium are determined by spectrophotometry.     

Chiral bispyridylamide metal complexes as catalysts for the enantioselective addition of TMSCN to aldehydes

The use of (1R,2R)-N,N′-bis(2-pyridinecarboxyamido)-1,2-diphenylethane metal complexes as catalysts for the enantioselective addition of trimethylsilyl cyanide to aldehydes is described. Enantioselectivities up to 70% ee were obtained with a Ti(IV) catalyst. Complexes with Zr(IV), Sc(III), Yb(III) and Cu(II) afforded less selective catalysts. For the Zr(IV) complex, a rate and selectivity enhancement was observed when adding 0.5 equiv. of water with respect to the catalyst. Studies of the metal complexes involved in the reaction were carried out by means of ¹H NMR spectroscopy. A Zr complex was shown by X-ray crystallography to exhibit distorted octahedral coordination, with the four nitrogen atoms of the doubly deprotonated ligand essentially in one plane.     

Determination of uranium using a flow system with reagent injection. Application to the determination of uranium in ore leachates

The determination of uranium by a flow system with reagent injection is based on the reaction of U(IV) with Arsenazo III in 3.6 M HCl; U(IV) is generated by reduction of uranyl ion in a lead reductor minicolumn installed in the sample channel of the manifold. The interference effect caused by several ions is studied. The calibration graph is linear up to 1.0 × 10^?5 M (2.4 mg l^?1) and the detection limit is 2.8 × 10^?8 M (6.6 μg l^?1). The modification of the manifold by including a second valve to by-pass the reducing column allows the measurement of the difference in peak heights, which makes the method specific for uranium.     

Polarographic behavior of uranium(VI) in malonic acid media determination of uranium in plutonium

The polarographic behavior of the uranium-malonate complex was investigated over the pH range 1.1–6.5. A reversible, one-electron wave was obtained. Below pH 4.9, the rate of disproportionation is nearly instantaneous and gives rise to a pseudo uranium(VI)-uranium(IV) reduction. Above pH 4.8 the concentration of uranium(V) is stable with respect to disproportionation. The half-wave potential is pH-dependent below pH 4.9, but it is independent of the malonate concentration above O.1 M. The diffusion current constant is 2.78 for the conditions described. A procedure for the determination of uranium in plutonium was developed for uranium concentrations greater than 225 p.p.m. Of 21 common impurities found in plutonium metal, only Cu, Fe, Pb, Sb and Ti cause significant interference ; titanium can be removed by ion exchange, and the other interferences by mercury cathode electrolysis.     

Use of microwave technology for the synthesis of organotitanium(IV) and organozirconium(IV) complexes with HPOH,HO<Superscript>∩</Superscript>N<Superscript>∩</Superscript>OH and HO<Superscript>∩</Superscript>N<Superscript>∩</Superscript>SH type of ligands

Synthesis and characterization of titanium(IV) and zirconium(IV) complexes of the types Cp₂M(Cl)(HPO), Cp₂M(HPO)₂, Cp₂M(O^∩N^∩O) and Cp₂M(O^∩N^∩S) (where M represents titanium or zirconium and HPO, O^∩N^∩O and O^∩N^∩S represent the donor sets of the ligands) have been reported. These new derivatives have been prepared by the reactions of titanocene dichloride or zirconocene dichloride with 2-hydroxy-N-phenyl benzamide(HPOH), 1-[(2-hydroxyphenyl)-1-N-phenylamino]hydrazine-carboxamide (HO^∩N^∩OH) and 2-hydroxy-N-phenyl benzamide benzothiazoline (HO^∩N^∩SH) in different molar ratios. The ligands and their complexes have been characterized by the elemental analyses, conductance measurement, molecular weight determinations and spectral studies. On the basis of electronic, I.r., ¹H.-n.m.r. and ¹³C.-n.m.r. spectral studies, trigonal bipyramidal and octahedral geometries have been proposed for the resulting complexes. All the ligands and their complexes have been screened for their biological activity on several pathogenic fungi and bacteria and were found positive in this respect.     

3,4-Dihydroxybenzoic Acid As A Reagent for the Spectrophotometric Determination of Titanium

Abstract

The reaction between titanium(IV) and 3,4-dihydroxybenzoic acid in aqueous media results in an intensely colored complex which is stable for at least 8h. It allows the spectrophotometric determination of titanium in silicate rocks. The proposed method, in pH 4.0–6.0, shows a molar absorptivity of 1.43.10⁴ L.mole^?1.cm^?1 at 380 nm. Beer's Law is obeyed up to 3.0 μg/mL of titanium(IV). The interference of iron(III) can be eliminated by reduction to iron(II) with hydroxylamine hydrochloride. The method was applied to the determination of titanium in various standard rocks and the results indicated that the accuracy and precision are satisfatory.     

The use of the silver reductor in bromide solutions

The reduction of bromide solutions of various metals with the silver (walden) reductor is described. Iron(III) is quantitatively reduced to iron(II) in 0.1–4 M HBr; similarly, copper(II) is reduced to copper(I) in > 1.5 M HBr, and vanadium.(V) to vanadium(IV) and uranium(VI) to uranium(IV) in > 0.3 M HBr. Tin(IV) is only partly reduced to tin(II) below 6M HBr. Reduction of molybdenum(VI) to molybdenum(V) requires heating, whereas reduction of tungsten(VI) is never quantitative. Suitable conditions for the titrations are described.     

Neutron activation analysis of traces in electrolytic zinc sulphate solutions : Part II. determination of molybdenum and rhenium

A neutron activation analysis has been devised for the determination of traces of molybdenum and rhenium in an electrolytic zinc sulphate solution. The activities due to the daughter ^99mTc and to ¹⁸⁶Re were counted. The chemical separation was performed on an anion-exchange resin. The matrix activities were separated by elution with 0.5 N nitric acid. The separation of technetium and rhenium was performed by an elution with 0.2 N perchloric acid. To avoid errors in the molybdenum determination, the uranium present in the sample was separated before the irradiation.