Enzymatic flow-injection determination of urea in blood serum using potentiometric gas sensor with internal nonactin based ISE

Ion-selective electrode with cellulose triacetate membrane containing nonactin is employed for the potentiometric detection of ammonia produced in biocatalytic reaction in flow-injection system with enzyme reactor. The elimination of interferences occurring in the presence of alkali metal ions was achieved by covering a nonactin membrane with outer hydrophobic gas permeable membrane. The obtained flow-injection response to ammonia indicates a possibility of ammonia determination down to 10 microM ammonia. In the flow-injection system for urea determination 200 microl of 10-fold diluted blood serum sample was injected into carrier stream of distilled water merged with TRIS buffer, passed through the urease flow-through reactor and then after merging with NaOH stream delivered to the detector. It was found in several series of natural blood serum samples, that the correction for endogenous ammonia in such a determination is not indispensable.     

Determination of creatinine in undiluted blood serum enzymatic flow injection analysis with optosensing

A specific enzymatic assay for creatinine in undiluted serum samples is described, exploiting the generation of ammonia from creatinine by immobilized creatinine iminohydrolase. The ammonia produced is separated from the sample matrix by gas diffusion into an acceptor stream containing a pH-sensitive indicator. The creatinine content is quantified by monitoring the resulting colour change of the indicator by means of reflectance measurement via optical fibers, the hydrophobic gas-permeable membrane serving as a diffuse reflector. Two approaches are used to overcome the interference caused by endogenous ammonia. The first is based on enzymatic abatement of endogenous ammonia by immobilized glutamate dehydrogenase. In the second, preferable, approach, endogenous ammonia, itself a parameter of clinical interest, is measured separately prior to the enzymatic degradation by creatinine iminohydrolase. Each assay requires only 30 μl of sample solution, and the sampling frequency is 60 h^?1. The relative standard deviation is approximately 3%.     

A Creatinine Specific Enzyme Electrode

Abstract

An extremely specific creatinine electrode was successfully developed for selective analysis of aqueous creatinine with a linear response over the range from 5 mg/l to 100 mg/l. The endogenous and exogenous species generally present in the serum do not interfere in the assay with the exception of ammonia. With the use of the electrode serum samples containing high creatinine can be assayed directly after pre-treatment. However, the electrode is not sensitive enough to detect the normal level serum creatinine due to the dilution of the serum after treatment.     

Flow injection analysis for glucose and urea with enzyme reactors and on-line dialysis

A flow injection system for glucose and urea determination is described. The glucose determination uses immobilized glucose oxidase in a reactor designed to give 100% substrate conversion. The hydrogen peroxide formed is converted to a coloured complex with 4-aminophenazone and N,N-dimethylaniline. The coupling is catalysed by a reactor containing immobilized peroxidase. The coloured complex is measured in a flow-through spectrophotometric cell. Urea is converted to ammonia in a reactor with immobilized urease and detected with an ammonia gas membrane electrode. Proteins and other interfering species from serum samples are removed in an on-line dialyzer. Calibration curves are linear for glucose in the range 1.6 × 10^-4–1.6 × 10^-2 M and for urea in the range 10^-4–10^-1 M. The samples are 25 μl for glucose determination and 100 μl for urea determination. Linear ranges can be changed by varying the sample sizes. The effects of the dialyser, enzyme reactors and detectors on dispersion are evaluated.     

Enzymatic Assay by Flow Injection Analysis with Detection by Chemiluminescence: Determination of Glucose,Creatinine, Free Cholesterol and Lactic Acid Using an Integrated Fia Microconduit

Abstract

A miniaturized flow injection system for the determination of D-glucose, L-lactic acid, creatinine and free cholesterol is described. All substrates are degraded enzymatically by means of oxidases which, along with ancillary coenzymes (creatinine assay), are immobilized on controlled porosity glass and incorporated into small PVC column reactors. The hydrogen peroxide generated by the individual oxidases is determined by chemiluminescence with an alkaline reagent containing luminol and hexacyanofer rate (III). The injection valve, flow channels, enzyme reactor and light detector are integrated into a FIA microconduit. The detection limits were 0.03 mg glucose/dl, 0.03 mg lactate/dl, 0.3 mM creatinine and 0.5 mg cholesterol/dl. The enzyme reactors all showed little change in activity over a 3 months period of operation and were found fully compatible with serum samples.     

Multicommutated flow analysis system for determination of creatinine in physiological fluids by Jaffe method

For the needs of photometric determination of creatinine according to Jaffe protocol a dedicated paired emitter detector diode (PEDD) detector has been developed. This PEDD device has been constructed in the compact form of flow-through cell (30 μL total volume and 7 mm optical pathlength) integrated with 505 nm LED-based emitter and 525 nm LED-based detector compatible with multicommutated flow analysis (MCFA) system. This fully mechanized MCFA system configured of microsolenoid valves and pumps is operating under microprocessor control. The developed analytical system offers determination of creatinine in the submillimolar range of concentrations with detection limit at ppm level. The throughput offered by the system operating according to multi-point fixed-time procedure for kinetic measurements is 15–40 samples per hour depending on the mode of measurements. The developed PEDD-based MCFA system has been successfully applied for the determination of creatinine in real samples of human urine as well as serum. The developed sampling unit used the system is free from effects caused by differences in sample viscosity.     

Simultaneous LC–UV–MS–MS Analysis of Nine Pivotal Metabolites in Human Serum: Application to Studies of Impaired Glucose Tolerance

A rapid, sensitive, and selective LC–UV–MS–MS method for simultaneous quantification of uric acid, creatinine, xanthine, creatine, hypoxanthine, adenosine, inosine, thymidine, and uridine in serum from patients with impaired glucose tolerance (IGT) has been developed and validated. After precipitation of protein in the serum with methanol samples were evaporated with a stream of nitrogen then reconstituted with aqueous ammonia (0.002 mol L^?1). Chromatographic separation was performed on a C₁₈ column with methanol–buffer (8 mmol L^?1 ammonium acetate adjusted to pH 6.1 with glacial acetic acid) as mobile phase at a flow rate of 0.8 mL min^?1. UV and MS–MS detection were used to quantify the metabolites on the basis of different concentrations and detector response. Linearity was excellent, with r ² no <0.998. Recovery, and intra-day and inter-day relative standard deviation (RSD) were >85, <10, and <10%, respectively. This reliable bioanalytical method enables evaluation of the levels of purines and pyrimidines in serum for IGT studies and diagnosis.     

Utility of copper(II) oxide as a packed reactor in flow injection assembly for rapid analysis of some angiotensin converting enzyme inhibitors

A new simple, sensitive, rapid and precise flow injection (FI) procedure based on the formation of copper complexes with some angiotensin converting enzyme (ACE) inhibitors has been developed and evaluated for the analysis of lisinopril (LN), enalapril maleate (EP), ramipril (RP) and perindopril tert-butylamine (PD). In this method, samples were injected into a flowing stream of distilled-deionized water, carried through the packed reactor of CuO for derivatization followed by ultraviolet (UV) detection. The flow rate was 1.5 ml min⁻¹ and column temperature was ambient (25 °C). Lisinopril was injected directly into the flowing stream and the detector response was measured at 262 nm. The hydrolysis products of enalapril maleate, ramipril and perindopril tert-butylamine in 0.2N NaOH were injected after neutralization with 1N HCl and the detector response was measured at 272, 265 and 252 nm, respectively. The developed method was successfully applied to the determination of tested drugs in pharmaceutical preparations at a sampling rate of 60 samples h⁻¹ and a recovery near 100% for all compounds.     

Ammonia abatement in an enzymatic flow system for the determination of creatinine in blood sera and urine

The abatement of ammonia in standard solutions, and in human blood and urine samples is achieved by adding suitable amounts of NADPH and α-ketoglutarate to the sample and passing it through a 2-m nylon tube with glutamate dehydrogenase immobilized on the inner wall. The procedure provides removal of 98% of the ammonia (1–5 × 10^?4 M) in the original sample in 50 s. The abatement of ammonia permits the use of an ammonia probe coupled with an immobilized degradative enzyme for the determination of creatinine. Creatinine was determined in clinical blood and urine samples by first removing the ammonia from the sample and then cleaving the creatinine to N-methylhydantoin and ammonia with immobilized creatininase. Only 200 μl of sample is needed and the entire process is conducted in a single flow stream.     

Determination of mercury(II) traces in drinking water by inhibition of an urease reactor in a flow injection analysis (FIA) system

 The integration of an urease reactor into a gas diffusion flow injection system was investigated for the determination of urease inhibitors. The enzyme was immobilized by entrapping in polyacrylamide gel. Besides copper and silver ions mercury ions inhibit the conversion of urea to carbon dioxide and ammonia catalysed by urease. The pH change of the carrier solution caused by the ammonia released was measured potentiometrically with a pH electrode. The inhibition behaviour of Hg(II) ions was investigated. A linear range from 2 to 20 μg L^-1 Hg(II) was obtained after a 90 s inhibition, with a correlation coefficient of r=0.9997. The relative standard deviation was 1.4% for five measurements of 2 μg L^-1Hg(II). A sample frequency of 7 h^-1 was achieved. The inhibited enzyme can be reactivated. The method was applied to the determination of Hg(II) in two drinking water samples. Received: 16 April 1996/Revised: 3 June 1996/Accepted: 11 June 1996     

Identification of ammonia in gas emanated from human skin and its correlation with that in blood.

Identifying and measuring the ammonia gas that emanates from human skin, which we called skin gas, has been achieved using a modified gas chromatographic system with a nitrogen-selective detector (flame-thermoionic detector: FTD). The skin gas is collected with a home-made sampling probe or bag, which is used to cover the skin surface of a subject's wrist, or a finger, for 5 min. It was proved that ammonia was present in skin gas for healthy persons and patients with hepatic disease. The average amounts of ammonia were 1.7 +/- 0.4 and 2.7 +/- 0.8 ng/cm2; furthermore, there was a significant difference between them (p < 0.05). In addition, the ammonia levels present in skin gas were correlated with that in blood (r = 0.64, p < 0.05).     

Development of a long-life capillary enzyme bioreactor for the determination of blood glucose

A long-life capillary enzyme bioreactor was developed that determines glucose concentrations with high sensitivity and better stability than previous systems. The bioreactor was constructed by immobilizing glucose oxidase (GOx) onto the inner surface of a 0.53 mm i.d. fused-silica capillary that was part of a continuous-flow system. In the presence of oxygen, GOx converts glucose to gluconic acid and hydrogen peroxide (H₂O₂). Hydrogen peroxide detection was accomplished using an amperometric electrochemical detector. The integration of this capillary reactor into a flow-injection (FIA) system offered a larger surface-to-volume ratio, reduced band-broadening effects, and reduced reagent consumption compared to packed column in FIA or other settings. To obtain operational (at ambient temp) and storage (at 4 °C) stability for 20 weeks, the glucose biosensing system was prepared using an optimal GOx concentration (200 mg/mL). This exhibited an FIA peak response of 7 min and a detection limit of 10 μM (S/N = 3) with excellent reproducibility (coefficient of variation, CV < 0.75%). It also had a linear working range from 10¹ to 10⁴ μM. The enzyme activity in this proposed capillary enzyme reactor was well maintained for 20 weeks. Furthermore, 20 serum samples were analyzed using this system, and these correlated favorably (correlation coefficient, r² = 0.935) with results for the same samples obtained using a routine clinical method. The resulting biosensing system exhibited characteristics that make it suitable for in vivo application.     

Immunochromatographic flow-injection method for detection of human serum immunoglobulin G antibodies to Helicobacter pylori

This study reports on the development of an immunochromatographic flow-injection (FI) method for the quantitation of human serum IgG antibodies to Helicobacter pylori. Patients’ sera were injected into the carrier stream of a FI manifold incorporating an H. pylori immuno-adsorbent reactor. The immuno-adsorbent was prepared by covalently linking H. pylori antigens to periodate oxidized Sepharose CL-4B. Any H. pylori antibody present in the serum is bound to the immuno-sorbent. The bound antibody was quantified by injecting into the carrier stream anti-human IgG peroxidase conjugate followed by TMB/H₂O₂ as the enzyme substrate. The FI system was optimized with respect to antigen loading (1.0 mg/ml gel), bioreactor length (3.0 cm), enzyme conjugate (0.2 mg/ml) and sample loop size (250 μl). One hundred clinical samples were analyzed for their H. pylori antibody concentrations and the results evaluated with respect to their receiver-operator characteristics (ROC). When a cut-off absorbance of between 0.7 and 0.75 was used for positive and negative samples a specificity (>95%), a sensitivity (>90%)and an overall accuracy (>94%) were obtained.     

An apparatus for the determination of volatile analytes by stopped-flow injection analysis using an integrated fiber optic detector

A new method for the analysis of volatile analytes using a stopped-flow injection system originating from either a gas or liquid phase has been developed. It uses an integrated fiber optic detector which also serves as a reactor. This system combines the advantages of gas diffusion and stopped-flow, making the overall assay very sensitive. Both gas streams and aqueous solutions containing ammonia were analyzed. The limits of detection are 40 ppb for gas phase analysis and 1.0 ppm for aqueous phase analysis.     

Preparation and Response Properties of Selective Bio-Electrodes Utilizing Polymer Membrane Electrode-Based Ammonia Gas Sensors

Abstract

A new type of potentiometric ammonia gas sensor is employed in the preparation of selective bio-electrodes for urea and glutamine. The bio-electrodes are constructed by immobilizing the enzyme urease and intact porcine kidney cells, respectively, at the surface of a disposable ammonium selective polymer membrane electrode-based ammonia gas sensor. The resulting electrodes have favorable response properties when compared to corresponding devices previously assembled with costly commercial gas sensors. Preliminary studies with the urea electrode demonstrate its usefulness for the rapid determination of urea in serum samples.     

The determination of ammonia in flue gas from the selective catalytic reduction of nitric oxide with ammonia

The emission of NO_x from coal-fired boilers can be limited by means of the selective catalytic reduction of NO_x with ammonia. The amounts of unreacted ammonia downstream should be low to avoid processing and environmental problems. Continuous measurement of the ammonia in the flue gas is needed. The determination of ammonia and flue gas sampling techniques are discussed. Measurements of ammonia in exhausts of a laboratory reactor and of a pilot plant for the selective catalytic reduction of NO_x with ammonia are presented. Ammonia was determined by mass spectrometry and chemiluminescence in the gas phase, and by spectrophotometric (Nessler and Berthollet reactions) or potentiometry in aqueous solution, in low (<5 μl l^?1) and high (<1000 μl l^?1) concentration ranges.     

Potentiometric determination of proteins with an ammonia sensor

A flow system is described for the cleavage of proteins with immobilized protease enzyme to L-amino acids which are then converted to ammonia with glass-immobilized L-amino acid oxidase. An ammonia gas electrode is used as detector. Immobilization techniques are discussed, as are optimum conditions for L-phenylalanine. Bovine serum albumin was determined in the range 0.1–100 μg ml^-1. Human blood sera required dilution for analysis.     

Flow-injection fluorimetric assay of nitrogen-containing substrates by on-line enzymatic generation of ammonia

A fluorimetric flow-injection method for the determination of nitrogen-containing substrates, which can be enzymatically degraded to ammonium/ammonia is described. The generated ammonia is detected fluorimetrically after on-line derivatization with o-phthaldialdehyde (OPA) and sulphite. The derivatization procedure is optimized by a fractional factorial design at two levels and by a super modified simplex procedure to obtain a high sensitivity and a low detection limit for ammonia in the micromolar concentration range. Under the given flow conditions the detection limit is 1 μM, and considerable selectivity for ammonia over primary amines such as unconverted substrate and amino acids is achieved. Two enzymatic systems, incorporating immobilized creatinine iminohydrolase (CIH) and L-aspartase column reactors, respectively, are tested as model systems. The feasibility of the CIH system for the practical assay of creatinine in serum samples is demonstrated.     

Simultaneous flow-injection assay of creatinine and creatine in serum by the combined use of a 16-way switching valve, some specific enzyme reactors and a highly selective hydrogen peroxide electrode

Creatine and creatinine in serum were assayed simultaneously in a noble flow-injection system made up by a 16-way switching valve with two sample loops, three enzyme reactors positioned in a serial way, and a delay coil needed to separate two peaks corresponding to two sample portions injected simultaneously. A Nafion/poly(1,2-diaminobenzene) bilayer modified electrode was used to selectively detect the hydrogen peroxide generated as one of the end products in the last enzyme reactor, without any interferences from electroactive species (such as l-ascorbate and urate) and proteins present in the serum. Because two sample portions passed through the flow line with different residence time, two peaks were obtained. The first peak corresponded to creatine and the second peak to the total of creatine and creatinine. The maximum currents of both peaks were linearly related to the concentration of creatine and total of creatine and creatinine in the range of 1-100 μM, respectively; 20 samples h⁻¹ could be processed with an R.S.D. <1.6%.     

An enzyme reactor electrode for determination of amino acids

L-Leucine can be determined with an enzyme reactor electrode containing L-amino acid oxidase immobilized with glutaraldehyde to glass. The reactor also contains immobilized catalase which splits the hydrogen peroxide formed. Oxygen for the reaction is also supplied by adding hydrogen peroxide to the samples. The electrode is an ammonia gas sensor. The calibration curve is strictly linear with Nernstian slope between 3·10^-5 and 10^-3 M leucine.