Spectrophotometric determination of traces of bromide based on its catalysis of the pyrocatechol violet/hydrogen peroxide reaction

A kinetic-spectrophotometric method for the determination of bromide (0.004–0.3 mg l^?1) based on its catalysis of the oxidation of pyrocatechol violet by hydrogen peroxide in HCl/H₂SO₄ is described. The effect of bromide is greatly increased in the presence of large amounts of chloride. The relative standard deviations are 6.4 and 13% for 0.034 and 0.010 mg l^?1 bromide, respectively (n = 10). Most ions commonly occurring in natural waters do not interfere except for iodide.     

Cathodic stripping determination of halides in mixtures

Cathodic stripping voltammetry is evaluated for the simultaneous determination of chloride, bromide and iodide in mixtures. Results are similar to those obtained with ion-selective electrodes. Detection limits are 177 μg l^?1 for chloride, 40 μg l^?1 for bromide, and 8 μg l?1 for iodide. Dam water and human spinal fluid were analyzed satisfactorily.     

Preconcentration and determination of calcium and magnesium in brine with flow-injection systems

On-line preconcentration on a chelating resin (Dowex A-1) and elution with 0.1 M hydorchloric acid is followed by spectrophotometry based on the metal complexes formed with 1- (2-hydroxy-4-diethylamino-1-phenylazo)-2-hydroxynaphthalene-3,6-disulfonic acid. The total concentration of calcium and magnesium is determined; in a second sample, calcium is masked with a ligand buffer containing excess of barium(II) and EGTA, and magnesium is determined. The calcium concentration is measured by difference. Magnesium (1–30 μg l^?1 and calcium (8– 10 μg l^?1) in 2.5 M sodium chloride can be determined. Calcium and magnesium in analytical reagent-grade sodium chloride and potassium chloride and primary standard sodium chloride are aslo determined. The method based on the exchange between calcium ions and Mg(EDTA) is proposed to enchance the sensitivity for calcium.     

Comparison of four chromogenic reagents for the flow-injection determination of aluminum in water

Pyrocatechol violet (PCV), aluminon, eriochrome cyanine R (ECR) and eriochrome cyanine R with cetyltrimethylammonium bromide (ECR/CTA) are compared as chromogenic reagents for the flow-injection determination of aluminium in water. The detection limit of the ECR/CTA method is 1 μg Al 1^?1. The detection limits of the PCV and ECR methods are 5 μg Al 1^?1. The aluminon method is the least sensitive, with a detection limit of 50 μg Al l^?1. Interference from iron, fluoride, phosphate and the acidity of the sample were investigated. The interference from iron is suppressed by hydroxylammonium chloride/1,10-phenanthroline in the PCV and ECR/CTA methods at concentrations less than 5 mg Fe l^?1. In the ECR and aluminon methods, iron <5 mg l^?1) is masked by ascorbic acid. Fluoride at <0.2 mg l^?1 can be tolerated in all methods. The aluminon method can tolerate up to about 500 mg l^?1 in the three other methods. All methods are sensitive to changes in acidity of the samples; the acidity should be 0.08–0.12 M HCl.     

A multivariate calibration procedure for the tensammetric determination of detergents

A multivariate calibration procedure based on singular value decomposition (SVD) and the Ho-Kashyap algorithm is used for the tensammetric determination of the cationic detergents Hyamine 1622, benzalkonium chloride (BACl), N-cetyl-N,N,N-trimethylammonium bromide (CTABr) and mixtures of CTABr and BACl. The sensitivity and accuracy depend strongly on the nature of the detergent. Acceptable accuracy is obtained with a two-step calculation procedure in which calibration constants for the total concentration range of interest are used to guide the choice of a more specific set of calibration constants which are valid for a much smaller concentration span. For Hyamine 1622, concentrations in the range 5 × 10^?6?2 × 10^?4 M could be determined with an accuracy of ± 10^?6 M. For CTABr, these numbers were 3 × 10^?6?2 × 10^?4 M and ± 5 × 10^?7 M; for BACl, they were 2 × 10^?3?9 × 10^?2 g l^?1 and ± 1 × 10^?3 g l^?1. In the mixtures of CTABr and BACl, the accuracies were ± 3 × 10^?6 M and × 1 × 10^?3 g l^?1, respectively.     

New Potentiometric Sensor for the Determination of Bromate Ion in Drinking Water

The characteristics, performance and application of ion‐selective electrodes for bromate ion based on rhodamine B and tetrahexyl ammonium bromide as electrode‐active substances are described for the first time. These electrodes respond with sensitivities of (58.0±1.0) and (61.0±2.0) mV decade^?1 over the range 1.0×10^?8–1.0×10^?2 mol l^?1 at pH 4–9 and 4–8 and a detection limit of 6.0×10^?8 and 4.0×10^?8 mol l^?1 for rhodamine B and tetrahexyl ammonium bromide sensors, respectively. The electrodes are easily constructed at a relatively low cost, have a fast response time and can be used for a period of 3 months without any considerable divergence in potential. The proposed sensors displayed good selectivity for bromate ion in the presence of several substances and inorganic anions. Sensors were used for the direct assay of bromate ion in drinking water samples.     

Sensitive spectrofluorimetric determination of zinc at ultra-trace levels

An ultra-trace method based on the reaction of zinc with salicylthiocarbohydrazone (SATCH) and Triton X-100 as a non-ionic surfactant was developed for the fluorimetric determination of zinc at the picogram level. The reaction is carried out in the pH range 4.4–4.7 in an aqueous ethanolic medium [52% (v/v) ethanol]. The influence of the reaction variables is discussed. The detection limit is 10 pg ml^?1 and the range of application is 0.01–500 μg l^?1, with an optimum range of 0.04–400 μg l^?1. The relative standard deviations are 0.68% (0.01–0.1 μg l^?1 of zinc), 0.41% (0.1–1.0 μg l^?1 of zinc), 0.64% (1–10 μg l^?1 of zinc), 0.82% (10–100 μg l^?1 of zinc) and 0.15% (100–500 μg l^?1 of zinc). The method is highly sensitive and selective in the presence of Cd^II and Hg^II. The effect of interferences from other metal ions and anions was studied; the masking action is discussed. The advantages of the proposed method include its high sensitivity, simplicity and selectivity.     

The determination of traces of thiocyanate and copper(II) ions by cathodic stripping voltammetry

Cathodic stripping methods are described for the determination of traces of thiocyanate ions down to 2 × 10^-8 mol l^-1 and Cu(II) ions down to 1 × 10^-8 mol l^-1. The method involves electrolytic accumulation of copper(I) thiocyanate on the surface of a hanging mercury drop electrode followed by stripping of the deposit during the cathodic scan. For the determination of thiocyanate, a copper amalgam electrode can be used. Examples of application of the method for the determination of traces of thiocyanate in common salts, in saliva and urine as well as for the determination of copper(II) ions in tap water are described.     

Spectrofluorimetric determination of niobium with morin enhanced by cetyltrimethylammonium bromide micelles

The effect of surfactants on the fluorescence of the niobium—morin system is described. Cationic surfactants strongly enhanced the intensity (e.g., cetyltrimethylammonium bromide (CTAB) gives an 80-fold increase), while anionic and non-ionic surfactants are without effect. The formation of 1:1 and 1:3 (Nb:morin) complexes is demonstrated spectrophotometrically. The conditional stability constants for these complexes in CTAB micelles are β₁ = (1.14 ± 0.01) × 10⁴ l mol^?1 amd β₃ = (5.66 ± 0.02 × 10¹⁰ l³ mol^?3. The micellar-enhanced fluorimetric method has a 1 μg l^?1 detection limit, and is highly selective. The r.s.d. for the determination of 50 μg l^?1 Nb is 3.5%.     

Direct determination of nitrite traces in high ionic-strength samples by electrostatic ion chromatography using diluted acid solutions as eluent

An ion-chromatographic (IC) system with high selectivity for separation of nitrite is described. It is analogous to the EIC (electrostatic IC) previously reported and was established using 3-(N,N-dimethylstearylammonio)propanesulfonate (C23H49NO3S, a sulfobetaine type of zwitterionic surfactants) as the stationary phase and dilute aqueous HCl solutions as the mobile phase. Five inorganic anions, sulfate, chloride, bromide, nitrate, and nitrite were chosen as the model analytes and were analyzed using this EIC system. Sulfate was always eluted first, followed by chloride, bromide and nitrate. Nitrite, however, could be eluted either before or after nitrate, depending on the concentration of HCl in the eluent. An elution order nitrate< nitrite was always obtained simply by using >3 mmol L(-1) HCl as the eluent. For nitrite the detection limit was better than 2.1 x 10(-7) mol L(-1) (100 microL sample injection volume, S/N=3, UV at 210 nm). Bromide and nitrate could also be separated under these HPLC conditions. The detection limit for bromide was 7.2 x 10(-8) mol L(-1) and for nitrate 6.5 x 10(-8) mol L(-1). Both nitrite and nitrate in real seawater samples were successfully determined with direct sample injection using this EIC system.     

Peroxidase-catalysed rupture of the CF bond as and indicator reaction for enzyme immunoassay : Kinetic determination of human immunoglobulin G, α-fetoprotein and placental lactogen

A fluoride ion-selective electrode is utilized as a sensor for the kinetic determination of peroxidase label in enzyme immunoassays. The method is based on a sandwich enzyme-linked immunosorbent assay (ELISA) technique, the peroxidase-catalysed rupture of the covalent CF bond in 4-fluorophenol and the subsequent release of fluoride ions. The determination of human immunoglobulin G (lgG), human α-fetoprotein (AFP) and human placental lactogen (HPL) was investigated. The potentiometric measurement of the rate of release of fluoride ion within 5 min provided a direct correlation with the concentration of analyte present in the sample. The concentration ranges investigated for the analytes were IgG 30 μg l^?1–10mg l^?1, AFP 5–500 μg l^?1 and HPL 60 ng l^?1–1 mg l^?1. Under the given experimental conditions, the detection limits were IgG 30, AFP 12.8 and HPL 1 μg l^?1. Replacing the rate method with the fixed-time mode (15–30 min) did not improve the detection limits. The performance of the present method was found to be comparable to that of the spectrophotometric detection technique.     

Determination of traces of inorganic anions by means of high-performance liquid chromatography on zipaxsax columns

Zipax-SAX pellicular beads are used as the anion-exchanger material ; a high-pressure packing technique is described. A Zipax-SAX column (200 × 4.5 mm) is used in a separation system with eluent suppression and conductivity detection as in ion-chromatography. Good separation of chloride, nitrite, bromide, nitrate and sulfate is obtained with 1.4 × 10^-3 M succinate or adipate eluents at pH 7. A complete separation takes about 6 min at a flow rate of 3 ml min^-1. Detection limits of 2 μg l^-1 chloride, 4 μg l^-1 nitrate and 10 μg l^-1 sulfate can be reached if 2 ml of sample is preconcentrated.     

Spectrophotometric determination of chloride in non-polar media by the mercury(II) thiocyanate reaction

A simple, rapid and accurate method for the spectrophotometric determination of chloride in non-polar media is described. The method is based on the well-known reaction of mercury(II) thiocyanate with chloride to release thiocyanate, which then reacts with iron(III). The optimum concentrations of reagents for the determination of chloride in 2,2,4-trimethylpentane (iso-octane) and cyclohexane are reported. The molar absorptivity of the complex at 505 nm is 5120 ± 200 dm³ mol^?1 cm^?1 for iso-octane and 5340 ± 340 dm³ mol^?1 cm^?1 for cyclohexane. Beer's Law is obeyed in the range 2 × 10^?7–2 × 10^?5 mol dm^?3 (0.01–1 mg l^?1) chloride.     

Fluorescence Enhancement of Rare Earths by Yttrium and its Application

Abstract

A study of the enhancement effect on the fluorescence intensity of the Eu³⁺–-thenoyltrifluoroacetone (TTA)–-cetyltri–-methylammonium bromide (CTMAB) and the Dy³⁺ pyrocatechol–-3,5-disulphonic acid (Tiron) systems by Y³⁺has been carried out. In the presence of yttrium the fluorescence intensity of the systems was enhanced by a factor of about 100 and 15, respectively. The fluorescence intensity was a linear function of the concentration of europium or dysprosium in the range 1.0 × 10^?10–-1.0 × 10^?8mol dm^?3 and 8.0 × 10^?8–-9.0 × 10^?6mol dm^?3, respectively. The detection limit was 1.0 × 10^?11mol dm^?3 and 1.0 × 10^?10mol dm^?3, respectively. The standard addition method was used for the determination of europium or dysprosium in rare earth oxides and gave satisfactory results. The mechanism of enhanced fluorescence was proposed.     

Polarographic determination of pirimicarb

A sensitive and selective polarographic method for the determination of pirimicarb is proposed. Linear calibration graphs were obtained by differential-pulse polarography in the 3.0 × 10^?7–9.0 × 10^?5 mol l^?1 range, the limit of determination being 2.8 × 10^?7 mol l^?1. No interferences were observed from other carbamate pesticides such as aminocarb, bendiocarb or carbaryl and only a matrix effect occurs in the presence of methiocarb. The method was applied to the determination of Pirimicarb in water samples with good recoveries.     

Electrochemical determination of norepinephrine on the membrane of silver nanoparticles doped poly-glycine eliminating the interference of ascorbic acid

The silver nanoparticles doped poly-glycine composite membrane was prepared by cyclic voltammetry on the surface of the glassy carbon electrode (GCE). The morphology and electrochemical properties were characterized by scanning electron microscopy and cyclic voltammetry, respectively, and in detail, the electrochemical behaviors of the norepinephrine (NE) on this membrane were studied. The results showed that the membrane had good catalytic properties for the oxidative–reductive reaction of NE. NE had a couple of sensitive oxidative-reductive current peaks. The reductive peak currents were linearly with its concentration in the range of 1.90?×?10^?7 to 7.00?×?10^?6 and 7.00?×?10^?6 to 1.00?×?10^?4?mol l^?1, and the linear regressive equations were i _pc (A)?=?3.73?×?10^?6?+?0.70C (mol l^?1), i _pc (A)?=?9.83?×?10^?5?+?0.12C (mol l^?1), respectively, with the relate coefficient (r) of 0.9926 and 0.9944. The detection limit was 1.2?×?10^?7?mol l^?1 (S/N?=?3), which could be used to determine the content of NE and at the same time, eliminate the interference of the ascorbic acid (AA). The proposed method had high sensitivity, good selectivity and stability.     

The cathodic stripping voltammetric determination of traces of iodide with a hanging copper amalgam drop electrode

A hanging copper amalgam drop electrode (HCADE) is used for the determination of traces of iodide by cathodic stripping voltammetry. The cathodic stripping peak of copper(I) iodide from the HCADE is better defined than that of mercury(I) iodide from a hanging mercury drop electrode. Optimum conditions and interferences are reported. With a 3-min deposition time at ?0.1 V vs. SCE, the calibration plot is linear up to 2 × 10^?6 mol dm^?3 iodide. The detection limit for iodide with the HCADE under voltammetric conditions is 4 × 10^?8 mol dm^?3; this is lowered to 8 × 10^?9 mol dm^?3 by using the differential pulse stripping technique.     

Studies on the voltammetric behaviour of a 2-mercaptoimidazole containing carbon paste electrode: determination of traces of silver

The voltammetric behaviour of a 2-mercaptoimidazole (2-MI) containing carbon paste electrode was studied. When mixed to carbon paste as an electrode modifier, 2-MI can be reduced at negative potentials (–1 V vs. SCE), but it does not give a response in the potential range where Ag(0) is oxidized to Ag(I). Silver could be accumulated from 0.1 mol l^–1 acetate buffer onto a 2-MI modified carbon paste electrode without a potential applied; after medium exchange, it was reduced at –1 V vs. SCE in 0.1 mol l^–1 acetate buffer solution and determined by differential pulse anodic stripping voltammetry. With suitable preconcentration times, the detection limit was 0.1 g l^–1; a linear relation between current and concentration was found to exist within a range of 0.5 to 1000 g l^–1. In the presence of EDTA, common metal ions have no or only little effect on the voltammetric determination of silver.     

A nafion/crown ether film electrode and its application in the anodic stripping voltammetric determination of traces of silver

Glassy carbon electrodes are modified by coating with dicyclohexyl-18-crown-6 in Nafion-117. The electrode is used for a very sensitive anodic stripping voltammetric determination of silver. High sensitivity is obtained owing to the release of crown molecules from the silver-crown complex during the deposition. The detection limit is 2×10^?12 M after electrodeposition for 30 min. The recommended supporting electrolyte is 4×10^?3–7×10^?3 M potassium chloride in 0.01 M nitric acid with a deposition potential of ?0.30 V vs. SCE and a linear potential scan. Three typical calibration graphs were linear over the range 2×10^?11–1×10^?8 M for deposition times of 30, 20 and 8 min, respectively. The silver content of reagent-grade ammonium nitrate was found to be 0.48×10^?4% with a relative standard deviation of 3.7% (n=7) for parallel determinations.     

Spectrophotometric determination of oxalic acid in presence of glyoxylic acid and chloride

Glyoxylic acid gives a yellow 1:1 complex, [FeCHOCOO]²⁺ with iron(III). The dissociation contant, measured by two spectrophotometric methods, is K = 9.7 ± 1 mol l^?1. Oxalic acid gives two complexes with iron(III) which absorb in the same range around 400 nm. With appropriate precautions and corrections, oxalic acid concentrations of about 10^?1–10^?2 M can be determined in the presence of glyoxylic acid and chloride.