Triphenyltetrazolium chloride as a new analytical reagent for molybdenum(VI): Application to plant analysis

Solvent extraction of molybdenum(VI) ion associate with triphenyltetrazolium chloride (TTC) has been studied. TTC was proposed as reagent for the spectrophotometric determination of micro amounts of molybdenum(VI) at λ_max 250 nm. The optimum conditions for extraction of molybdenum(VI) as an ionassociation complex with TTC has been determined. Beer’s law is obeyed in the range of 0.5–10 μg/mL molybdenum(VI). The molar absorptivity of the ion-pair is 1 × 10⁶ L/mol cm. The sensitivity of the method is 9.6 × 10⁻⁵ μg/cm². The characteristic values for the extraction equilibrium and the equilibrium in the aqueous phase are: distribution constant K _D = 32.64, extraction constant K _ex = 2.19 × 10¹⁰ association constant β = 6.71 × 10⁸. The interferences of different cations, anions on molybdenum(VI) determination were also investigated. A sensitive and selective method for the determination of microquantities of molybdenum(VI) has been developed. The determination was carried out without preliminary separation of molybdenum. A novel procedure of molybdenum(VI) extraction and spectrophotometric determination in different plant samples was examined.     

Spectrophotometry Determination of Molybdenum with N-Cyanoacylacetaldehyde Hydrazone

N-cyanoacylacetaldehyde hydrazone (CAAH), which is a laboratory synthetic reagent, is proposed as a new reagent for spectrophotometry determination of microamounts of molybdenum at λ_max 790 nm. The reagent forms 1:1 blue coloured complex with molybdenum (VI) in phosphoric acid solution. The stable blue colour is obtained finally after changing from yellow to green. The colour development depends on temperature, time and concentration of phosphoric acid. This reagent is applied for the determination of molybdenum in steel alloys and the results are satisfactory.     

Flow-injection catalytic spectrophotometic determination of molybdenum(VI) in plants using bromate oxidative coupling of p-hydrazinobensenesulfonic acid with N-(1-naphthyl)ethylenediamine

A novel flow-injection spectrophotometry has been developed for the determination of molybdenum(VI) at nanograms per milliliter levels. The method is based on the catalytic effect of molybdenum(VI) on the bromate oxidative coupling of p-hydrazinobenzenesulfonic acid with N-(1-naphthyl)ethylenediamine to form an azo dye (λ_max = 530 nm). Chromotropic acid (4,5-dihydroxy-2,7-naphthalenedisulfonic acid) acted as an effective activator for the molybdenum(VI)-catalyzed reaction and increased the sensitivity of the method. The reaction was monitored by measuring the change in absorbance of the dye produced. The proposed method allowed the determination of molybdenum(VI) in the range 1.0-20 ng mL⁻¹ with sample throughput of 15 h⁻¹. The limit of detection was 0.5 ng mL⁻¹ and a relative standard deviation for 10 ng mL⁻¹ molybdenum(VI) (n = 10) was 2.5%. The interfering ions were eliminated by using the combination of a masking agent and on-line minicolumn packed with cation exchanger. The present method was successfully applied to the determination of molybdenum(VI) in plant foodstuffs.     

Reactions of a Dioxidomolybdenum(VI) Complex with Thionation Reagents—Formation of Mo(IV) Species with Sulfur Donors

Molecular molybdenum complexes with sulfur donor ligands are generally studied as soluble model compounds for molybdenum enzymes essential for life. The dioxidomolybdenum(VI) complex with tetradentate aminobisphenolate ligand undergoes a reaction with thionation reagent P₂S₅ or its organic derivative, Lawesson’s reagent, to yield stable Mo(IV) aminobisphenolate complexes, where pristine oxido ligands have been replaced by bidentate sulfur donors tetrasulfide, S₄²⁻ or (4-methoxyphenyl)phosphonotrithioate residue derived from Lawesson’s reagent. This is in contrast to the behaviour of analogous dioxidotungsten(VI) complex, which, under similar conditions, yields W(VI) S₂ systems. The overall cis,trans,cis geometry of the parent dioxidomolybdenum(VI) aminobisphenolate is retained, namely, the neutral nitrogen donors are in cis positions, phenolate oxygens are trans to each other and sulfur donors are cis. Although formally Mo(IV), thus d² system, the studied complexes have diamagnetic singlet electron configurations as a result of the axially compressed octahedral structures.     

Synthesis,structure and properties of eight novel molybdenum(VI) complexes of the types: [MoO2LD] and [{MoO2L}2D] (L = thiosemicarbazonato ligand,D = N-donor molecule)

Eight new molybdenum(VI) complexes with 4-(diethylamino)salicylaldehyde and 2-hydroxy-3-methoxybenzaldehyde thiosemicarbazones have been prepared. They were characterized as mononuclear [MoO₂LD] or dinuclear [{MoO₂L}₂D] complexes. In all the compounds the MoO₂²⁺ core is coordinated by a tridentate ONS thiosemicarbazonato ligand and by the N-donor molecule (imidazole, pyridine or γ-picoline). All the complexes were characterized by chemical analysis, IR spectroscopy and thermogravimetry. Three of the mononuclear complexes, dioxo[(2-hydroxy-3-methoxybenzaldehyde thiosemicarbazonato)(pyridine)]molybdenum(VI), dioxo[(2-hydroxy-3-methoxybenzaldehyde thiosemicarbazonato)(γ-picoline)]molybdenum(VI) and dioxo[(2-hydroxy-3-methoxybenzaldehyde thiosemicarbazonato)(imidazole)]molybdenum(VI) were also characterized by single-crystal X-ray structural analysis. A spectrophotometric method for the determination of molybdenum based on extraction of ion-pairs formed by the cationic surfactant and the [MoO(SCN)₄]⁻ anion is described.     

Spectrophotometric Determination of Trace Amounts of Molybdenum in Steel and Pure Iron with a New Chromogenic Reagent Dimethoxyhydroxyphenylflurone

ABSTRACT

A simple method for the direct determination of trace molybdenum in low alloy steel and pure iron with selectivity and sensitivity is reported. In the presence of TritonX-100 and sulphuric-phosphoric acid medium, a new chromogenic reagent dimethoxyhydroxyphenyl-flurone (DMHPF) forms a red complex with molybdenum(VI). The molar absorptivity is obeyed from the range of 0? 8 μg/25 ml for molybdenum(VI). Most of metal ions and 35000-fold amounts of iron do not interfere with the determination of molybdenum. The proposed method has been successfully used for the determination of trace amounts of molybdenum in steel and pure iron specimens.     

Test determination of molybdenum(VI) with the use of phenylfluorone immobilized on a cellulose cloth

It was demonstrated that phenylfluorone immobilized on a cellulose cloth matrix can be used as a reagent for the test determination of molybdenum(VI). Phenylfluorone was immobilized on a mixed fiber cloth (viscose with cotton), which provides high retention of the reagent (97%) and exhibits chemical stability and mechanical strength. The selectivity of the reaction was studied. A test procedure was developed for the determination of 0.05–5 mg/L molybdenum(VI) in natural waters (RSD < 40%); the time of analysis is 10–15 min.     

Sequential Injection Photometric Determination of Molybdenum Using Organic Wetting Film Extraction

Wetting film extraction was combined with colorimetry to determine nanogram amounts of molybdenum(VI). The simple extraction procedure enhanced sensitivity and selectivity while maintaining a high sample throughput. Extraction and back extraction steps were exploited to exclude interference from the 31 metal species and 11 anions tested. In the first step, molybdenum(VI) was extracted into a toluene film as an ion paired complex. Molybdenum(VI) reacted with thiocyanate to form anionic molybdenum(V) and/or molybdenum(VI) thiocyanate complexes. The complexes were extracted into a toluene film containing tetraheptylammonium bromide as ion pairing reagent. The thiocyanate ligands were displaced by 1,5-diphenylcarbazone (DPC) to form a more intensely colored complex (λ_max= 540 nm). DPC was introduced in the back extraction solvent, methanol. The relative standard deviation was 2.5% for 50 ng ml⁻¹of molybdenum(VI) (n= 10) at a rate of 25 samples h⁻¹. The detection limit (3 × baseline noise) was 2.5 × 10⁻⁸M.     

Azo compounds as reagents for the voltammetric determination of molybdenum(VI)

Linear sweep voltammograms of Lumogallion IREA (pH 2), Magneson IREA (pH 2), 4-(2-pyridylazo)resorcinol (pH 4.8), and 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (pH 4.8) in the presence of molybdenum(VI) exhibit peaks at potentials more negative than the potentials of reduction peaks of the reagents by approximately 0.1 V. In all of the above cases, the heights of these peaks linearly increased with an increase in the concentration of molybdenum(VI) in the range from 5 x 10^-7 to 2.5 x 10^-6 M; thus, these peaks can be used for the determination of molybdenum. The simultaneous proportional decrease in the heights of the cathodic peaks of the reagents can be used for indirect determination of molybdenum(VI). The limits of detection without preliminary accumulation at a dropping mercury electrode with a drop time of 5 s are (1.5-3.9) x 10^-7 M, depending on the nature of the reagent and the technique used for determining the concentration.     

A New Method for the Microdetermination of Molybdenum (VI) in Steel,Biological Materials and Waters

Abstract

A method is presented for the trace analysis of molybdenum (VI) in standard steel sample, plant tissues, animal tissues, and natural waters. The method is based on the extractive separation of molybdenum from complex matrices by chelating it with a new reagent N-p-methoxypheny1-2-furylacrylohydroxamic acid (MFHA) into isoamyl alcohol followed by spectrophotometric determination, Eight other new hydroxamic acids were studied for the same purpose and MFHA was chosen as it was the most sensitive of these as well as the other hydroxamic acids reported previously, The method enables rapid and reliable analysis of molybdenum at ppb lelvels in environmental matrices.     

Retention profile, kinetics and sequential determination of selenium(IV) and (VI) employing 4,4'-dichlorodithizone immobilized-polyurethane foams

Polyurethane foams (PUFs) loaded with the chromogenic reagent 4,4′-dichlorodithizone (Cl₂H₂D_Z) have been investigated for the quantitative retention, chemical speciation and sequential determination of traces of inorganic selenium(IV) and (VI) from aqueous media containing bromide ions. The retention profile of selenium(IV) onto the reagent loaded foam followed a dual-mode sorption mechanism involving both absorption related to “solvent extraction” and an added component for surface adsorption. The kinetics and thermodynamic characteristics of selenium(IV) uptake onto PUFs have been studied. The kinetics of selenium(IV) sorption onto PUFs was found fast, reached equilibrium in few minutes and followed a first-order rate constant in presence of bromide ions in the extraction media. The thermodynamic parameters, ΔH, ΔS and ΔG, indicated the exothermic and spontaneous nature of the sorption process. The sorption and the recovery percentages of inorganic selenium(IV) from fresh water by the proposed loaded foam columns were achieved quantitatively. The height equivalent to theoretical plate (HETP), the number of layers (N), breakthrough capacity and the critical capacity for selenium(IV) uptake onto Cl₂H₂D_Z loaded foams columns were found to be 1.3, 103, 8.6 and 7.2 mg/g, respectively. The method was successfully applied for the chemical speciation and sequential determination of inorganic selenium(IV) and/or (VI) species spiked to fresh and industrial wastewaters.     

Novel Reaction for Rapid,Simple, and Sensitive Determination of Molybdenum in Various Samples

Abstract

A new sensitive, selective, rapid, and reproducible method is presented for the analysis of trace amounts of molybdenum (VI) (Mo(VI)). The method is based on the reaction of molybdenum (VI) with a new analytical reagent, 6‐(5‐Chloro‐2‐hydroxy‐4‐sulfophenylazo)‐5‐hydroxy‐1‐naphthalenesulfonic acid, disodium salt. Under optimum reaction conditions, molybdenum (VI) forms a red complex with a maximum absorption peak at 589 nm. The color reaction is rapidly completed at room temperature. The apparent molar absorption coefficient and Sandell sensitivity were 1.13×10⁴ L · mol^?1 · cm^?1 and 0.0084 µg · cm^?2, respectively. Beer's law was obeyed up to 8.5 µg · mL^?1. Methods for the determination of Mo(VI) by first‐derivative spectrophtometry have also been proposed at 547 and 625 nm. The proposed methods offer the advantages of sensitivity, rapidity, selectivity, and simplicity without any prior separation or extraction. The methods have been applied to the determination of Mo(VI) in various environmental samples and some alloys; satisfactory results have been obtained.     

The polarography of molybdenum,titanium and niobium in solutions of organic acids

Further work on the polarographic reduction of molybdenum(VI), niobium(V) and titanium(IV) in base electrolytes containing organic acids is reported. A base electrolyte of 0.5 M citric acid-0.025 M sulphuric acid-0.05 M thorium nitrate proved suitable for the determination of molybdenum and titanium in the presence of niobium, tantalum, tungsten and zirconium. A direct polarographic method using this base electrolyte is described for the determination of molybdenum in a niobium base alloy.     

Homogeneous liquid-liquid extraction method for the selective separation and preconcentration of ultra trace molybdenum

A new simple and efficient homogeneous liquid-liquid extraction method for the selective separation and preconcentration of molybdenyl ions was developed. α-Benzoin oxime (ABO) was investigated as a complexing ligand, and perfluorooctanoate ion (PFOA⁻) was applied as a phase-separator agent under strongly acidic conditions. Under the optimal conditions ([ABO] = 2.1 × 10⁻³ M, [PFOA⁻] = 1.8 × 10⁻² M, [HNO₃] = 1.7 M, [acetone] = 11.8% (v/v)), 10 μg of molybdenum in 5 ml aqueous phase could be extracted quantitatively into 40 μl of the sedimented phase. The maximum concentration factor was 125-fold. Thiocyanate was applied as a chromogenic reagent for the direct spectrophotometric determination of molybdenum in the sedimented phase. The reproducibility of the proposed method is at the most 2.4%.The influence of the type and concentration of acid solution, the concentration of ABO, the type and volume of the water-miscible organic solvent, the concentration of PFOA⁻, and the effect of different diverse ions on the extraction and determination of molybdenum(VI) were investigated. The proposed method was applied to the extraction and determination of molybdenum(VI) in natural water, Spinach, and Lucerne samples. A satisfactory agreement exists between the results obtained by the proposed method and those reported by GF-AAS.     

Determination of molybdenum using 1,5-diphenylcarbazone immobilized on silica

The sorption of 1,5-diphenylcarbazone on highly dispersed silica from toluene and acetone-hexane (1:4) solutions was studied. The nature of the bonding of the reagent with the surface of silica gel was studied by absorption spectrometry. A solid-phase reagent is proposed for the sorption-diffuse-reflection and visual test determinations of down to 0.025 and 0.05 μg/L molybdenum(VI), respectively. The procedures were used for the determination of molybdenum in sea salt and a medicinal preparation.     

Speciation, liquid-liquid extraction, sequential separation, preconcentration, transport and ICP-AES determination of Cr(III), Mo(VI) and W(VI) with calix-crown hydroxamic acid in high purity grade materials and environmental samples

A new functionalized calix[6]crown hydroxamic acid is reported for the speciation, liquid-liquid extraction, sequential separation and trace determination of Cr(III), Mo(VI) and W(VI). Chromium(III), molybdenum(VI) and tungsten(VI) are extracted at pH 4.5, 1.5 M HCl and 6.0 M HCl, respectively with calixcrown hydroxamic acid (37,38,39,40,41,42-hexahydroxy7,25,31-calix[6]crown hydroxamic acid) in chloroform in presence of large number of cations and anions. The extraction mechanism is investigated. The various extraction parameters, appropriate pH/M HCl, choice of solvent, effect of the reagent concentration, temperature and distribution constant have been studied. The speciation, preconcentration and kinetic of transport has been investigated. The maximum transport is observed 35, 45 and 30 min for chromium(III), molybdenum(VI) and tungsten(IV), respectively. For trace determination the extracts were directly inserted into the plasma for inductively coupled plasma atomic emission spectrometry, ICP-AES, measurements of chromium, molybdenum and tungsten which increase the sensitivity by 30-fold, with detection limits of 3 ng ml⁻¹. The method is applied for the determination of chromium, molybdenum and tungsten in high purity grade ores, biological and environmental samples. The chromium was recovered from the effluent of electroplating industries.     

The extraction of molybdenum(VI) from perchloric acid solution by tri-n-butyl phosphate

The extraction of molybdenum(VI) by tri-n-butyl phosphate (TBP) from 1 M NaClO₄ medium has been investigated as a function of molybdenum concen     

New insights into the reaction of t-butylhydroperoxide with dichloro- and dimethyl(dioxo)molybdenum(VI)

Lewis-base adducts of dichlorodioxomolybdenum(VI) and dimethyldioxomolybdenum(VI) react in an equilibrium reaction with excess t-butylhydroperoxide (TBHP) under the formation of a seven-coordinated molybdenum(VI) complexes displaying a η¹-alkylperoxo-ligand. HCl/CH₄ elimination or the protonation of the Lewis-base ligand is not observed, the TBHP hydrogen atom is instead transferred to one of the terminal oxo ligands under the formation of a molybdenum bound OH moiety. The peroxo species is assumed to be the active catalyst in olefin epoxidation.     

Efficacious selective separation of U(VI) over Mo(VI) using novel 2,9-diamide-1,10-phenanthroline ligands: Liquid-liquid extraction and coordination chemistry

Uranium and molybdenum are important strategic elements. The production of ⁹⁹Mo and the hydrometallurgical process of uranium ore face difficult problems of separation of uranium and molybdenum. In this study, the four phenanthroline diamide ligands were synthesized, and extraction and stripping experiments were performed under different conditions to evaluate the potential application of these ligands for separation of U(VI) over Mo(VI). With the growth of alkyl chain, the solubility of ligands could be greatly improved, and the separation effect of U(VI) over Mo(VI) gradually increased. The SF_U/Mo were around 10,000 at 4 mol/L HNO₃. Three stripping agents were tested with the stripping efficiency of Na₂CO₃ (5%) > H₂O > HNO₃ (0.01 mol/L). The stripping percentages of the three stripping agents were all close to unity, indicating that the ligands had the potential to be recycled. The chemical stoichiometry of U(VI) complexes with ligands was evaluated as 1:1 using electrospray ionization mass spectrometry, ultraviolet visible spectroscopy and single-crystal X-ray diffraction. The consistency between theoretical calculation and experimental results further explains the coordination mechanism.     

Extraction of molybdenum(vi) by bis-(dioctylphosphinyl)-alkanes

A series of bis-(dioctylphosphinyl)-alkanes [(DOPO)₂R], has been prepared and employed as liquid-liquid extractants for molybdenum(VI) from hydrochloric acid solutions [R = p-CH₂C₆H₄CH₂ or (CH_2n(n = 2, 3, 4, 5, 8 or 10)]. These bis-type ligands were found to be much more efficient extractants than trioctylphosphine oxide and benzyl-dioctylphosphine oxide. The formula of the molybdenum(VI) extracted by (DOPO)₂(CH₂)₅ into the organic phase was determined to be MoO₂[(DOPO)₂(CH₂)₅](Cl)₂.