电感耦合等离子体质谱（ICP-MS）法测定碳质板岩样品中铂族元素

碳质板岩属黑色岩系,与多种金属(包括贵金属)成矿有密切的联系。按照常规的分析方法,硫镍试金溶剂配方都不能对贵金属元素有较好的富集,影响贵金属元素的测定。根据石墨岩中样品的成份特征,对测定铂族元素的常规硫镍试金配方进行了改进,增加了硝酸钾和氧化镁,且无需加入锇稀释剂。通过实验选择了合适比例配料,熔融后粉碎镍扣,加入盐酸分解,碲共沉淀剂富集。过滤沉淀用王水溶解。用电感耦合等离子体质谱(ICP-MS)法测定,Lu作内标,对碳质板样品中的铂族元素进行了测定。结果表明,加标回收率为85%～105%,能够满足碳质板岩中铂族元素的分析测定要求。     

Partition and determination of cadmium, copper, lead and zinc in marine suspended particulate matter

A method for the determination of Cd, Cu, Pb, and Zn in the total and acetic acid (25%) soluble fraction of suspended particulate matter collected on Nuclepore membranes is described. The acetic acid leaching was carried out in a modified Millipore vacuum filtration apparatus. The total sample and the acetic insoluble fraction were decomposed in teflon bombs with HF/aqua regia. Flame or graphite furnace AAS was used for metal determinations. Sequential acetic acid extractions (3) show that on the average 76.4-92.0% of the metals are removed with the first extraction. Cadmium is potentially most easily available to biota with 90.4% of the total metal concentration located in the acetic acid soluble fraction.     

Bestimmung der Edelmetalle Au, Pd, Pt, Rh und Ir in Gesteinen und Erzen mit der elektrothermalen Atomabsorptions-Spektrometrie

Zusammenfassung Nach einem Druckaufschluß bei 170°C von 5 g Gesteinsprobe mit HF und aqua regia werden die Edelmetalle Au, Pd, Pt, Rh und Ir durch selektive Adsorption auf den Ionenaustauscher SARAFION NMRR von der restlichen Matrix abgetrennt. Im Thioharnstoffeluat können die Edelmetalle mit der elektrothermalen AtomabsorptionsSpektrometrie quantitativ bestimmt werden. Die Methode wurde durch Analyse von internationalen Gesteinsstandards und Meteoriten geprüft.

---

Determination of the precious metals Au, Pd, Pt, Rh and Ir in rocks and ores by electrothermal atomic absorption-spectrometry

Summary After pressure digestion at 170°C of 5 g rock samples with HF and aqua regia the precious metals Au, Pd, Pt, Rh and Ir are separated from the rest matrix with selective adsorption on SARAFION NMRR ion exchange resin. The precious metals can be determinated in the thiourea eluate by electrothermal atomic absorption spectrometry. The reliability of the procedure was confirmed by analysing rock standards and meteoritic material.

---

---

Die Untersuchungen wurden durch Mittel der Deutschen Forschungsgemeinschaft

---

Die Untersuchungen wurden durch Mittel der Deutschen Forschungsgemeinschaft     

A simple decomposition and chelating resin separation for the determination of heavy metals in silicates by atomic absorption spectrometry

A simple method for the determination of copper, nickel, zinc, and cadmium in silicate rock samples is reported. Silicates are decomposed with hydrofluoric acid and aqua regia in a sealed Teflon vessel. After centrifugation and addition of malonic acid, the supernatant liquid is passed through a small column of Chelex 100. The metals are eluted with 2 M nitric acid, and determined by atomic absorption spectrometry. The method is rapid, simple, and free from contamination. The results obtained for 14 standard reference rock samples (USGS, GSJ, and CSRM) agree with literature data; the recovery, reproducibility, and accuracy of the proposed method are satisfactory.     

Development of a new microelectrolysis system for in-situ electrodeposition of ultra-traces of gold prior to measurement by ETAAS

Electrodeposition is known to be suitable for separation and preconcentration of extremely low concentrations of analyte from bulk samples and is instrumentally is very simple. In this approach a new combined system was designed for in-situ electrodeposition of ultratrace levels of gold from micro samples on to a graphite furnace prior to determination by electrothermal atomic absorption spectrometry (ETAAS). Sediment samples were digested and traces of the gold content were extracted with boiling aqua regia. To prevent the highly corrosive effect of aqua regia media, the graphite tube surface was pre-coated by electrodeposition of ppm amounts of Pd prior to sample introduction. Separation of the analyte from the matrix was achieved by electrodeposition of the analyte in situ on the Pd/C surface of the furnace tube. Vanadium was also used as a modifier to stabilize the analyte from decomposition at charring temperatures. By using the proposed microelectrolysis preconcentration technique a considerable improvement in sensitivity and detection limit was achieved compared with conventional ETAAS. Characteristic masses for ED-ETAAS techniques in both nitric acid and aqua regia were reported to be m(o)=4.1 pg, with %RSD=2.9; the calculated LOD was 0.105 ppb, and typical calibration graphs for this element in nitric acid and aqua regia for both techniques were linear up to 70 microg L(-1) with about 99% recovery. Six reference sediments samples were tested by the proposed technique and by the Conv-ETAAS method. The results were in agreement with recommended values (reported by a reference laboratory using UV-visible spectrometry), demonstrating the efficiency of extraction and preconcentration of ultratrace levels of gold.     

Microwave-assisted aqua regia digestion for determining platinum,palladium, rhodium and lead in catalyst materials

This study investigated a microwave-assisted aqua regia digestion of catalyst samples prior to the determination of Pt, Pd, Rh and Pb by ICP-OES. While optimising the method, the effect of digestion temperature on the digestion efficiency was investigated. Few aqua regia digestions were also carried out using a high pressure asher, with a digestion temperature of 280 °C. In addition, XRD (X-ray diffractometry) was used to characterise digestion residue. The study showed that accurate and reliable results for Pt, Pd, Rh and Pb in a recycled monolith catalyst (NIST SRM 2557) were obtained by ICP-OES after the microwave assisted aqua regia digestion. The amounts of Pt, Pd and Rh in the prepared catalyst samples were also at the expected levels. Furthermore, the results indicated that the main part of the impurities and supporting material elements can be quantitatively extracted from the catalyst samples by using the microwave-assisted aqua regia sample pre-treatment.     

低温焙烧-原子吸收法测定高含量辉锑矿中的金

采用先低温焙烧除硫后再高温焙烧,通过王水溶样,对辉锑矿矿样焙烧方法的对比表明,利用方法焙烧样品,矿样不结块,金可溶解完全.方法经国家一级标准物质分析验证,结果与标准值相符.对实际样品测定的方法精密度为1.44%～4.79%(RSD,n=5).加标回收率在95.5%～104.3%,方法快速、准确,适用于高含量辉锑矿中金的批量样品分析.     

Determination of Cd, Cu, Pb and Zn in environmental samples: microwave-assisted total digestion versus aqua regia and nitric acid extraction

We validated the determination of the content of Cd, Cu, Pb and Zn using two digestion protocols: a microwave-assisted total digestion and an aqua regia extraction procedure based on the International Organization for Standardisation (ISO) 11466 method. Our goal in validating these two protocols, along with a nitric acid digestion, is to propose a rapid, cheap and easily automated digestion method for monitoring heavy metal content in environmental samples. We applied the digestion protocols to samples with a wide range of organic matter such as sediments, soils, sludges and plant material.For samples with a low carbonate or organic matter contents, such as sediments and agricultural soils, aqua regia digestion in an aluminium block was revealed to be an optimum estimator for the total metal content. For samples with a high organic matter content, such as organic horizons of forest floor layers, plant material and organic soils, nitric acid digestion could substitute microwave (MW)-hydrofluoric acid (HF) digestion. Except in a few samples with high organic matter or low heavy metal content, the RSD values obtained after the application of the proposed digestion procedures were lower than 5%. Based on the obtained results, a decision flow chart for choosing the fit-for-purpose digestion procedure is suggested.     

Determination of Platinum,Palladium, Ruthenium,Rhodium, and Iridium in Ultrabasic Rock from the Great Dyke of Zimbabwe by Inductively Coupled Plasma–Optical Emission Spectrometry

Platinum, palladium, ruthenium, rhodium, and iridum were determined in ultrabasic rock from the Great Dyke of Zimbabwe by inductively coupled plasma optical emission spectrometry. The limits of detection for these elements were less than 7 ng/g. The samples were fused at 1100°C to separate the noble metals which were enriched into a nickel sulfide button and dissolved in hydrochloric acid. The insoluble noble metals were filtered, dissolved in aqua regia in a boiling water bath, and determined by inductively coupled plasma optical emission spectrometry. This method was employed for the characterization of large quantities of ultrabasic rock from the Great Dyke of Zimbabwe.     

Speciation of beryllium, nickel, and vanadium in soil samples from Csepel Island, Hungary

Sequential leaching methods have been used for the speciation of Be, Ni, and V in five soil samples from Csepel Island on the Danube river located near an oil-fired power plant. The concentrations of the elements of the extracts were determined by inductively coupled plasma mass spectrometry. The total efficiency (the sum of the extracted metals divided by metal fraction which is soluble in aqua regia) of the five-step method was always higher. The difference for Ni was considerable, because of the high abundance of Ni found in the moderately reducible fraction, which is absent from the three-step method. The sum of the mobile species (exchangeable, carbonatic, and easily reducible) determined by both methods, were in reasonable agreement; this was not so for the individual fractions. There were greater differences between the non-mobile fractions (moderately reducible and oxidizable), because of the presence or absence of the moderately reducible fraction. For both methods there was good correlation between the oxidizable fraction and the organic matter content of the soils.     

Speciation of beryllium, nickel, and vanadium in soil samples from Csepel Island, Hungary

Sequential leaching methods have been used for the speciation of Be, Ni, and V in five soil samples from Csepel Island on the Danube river located near an oil-fired power plant. The concentrations of the elements of the extracts were determined by inductively coupled plasma mass spectrometry. The total efficiency (the sum of the extracted metals divided by metal fraction which is soluble in aqua regia) of the five-step method was always higher. The difference for Ni was considerable, because of the high abundance of Ni found in the moderately reducible fraction, which is absent from the three-step method. The sum of the mobile species (exchangeable, carbonatic, and easily reducible) determined by both methods, were in reasonable agreement; this was not so for the individual fractions. There were greater differences between the non-mobile fractions (moderately reducible and oxidizable), because of the presence or absence of the moderately reducible fraction. For both methods there was good correlation between the oxidizable fraction and the organic matter content of the soils.     

Rapid derivative spectrophotometric method for the determination of platinum in Pt-Ru/C catalyst using iodide media.

A rapid spectrophotometric method for the determination of platinum in 20% Pt-Ru (Pt:Ru (1:1)) carbon-supported catalyst has been developed. The samples of catalyst (0.85-12.60 mg) have been digested 1) in aqua regia after preliminary separation of carbon by burning or 2) directly in aqua regia in the presence of carbon. The detection of platinum was carried out in the obtained solutions after conversion of the metal into the iodide complex. The interfering effect of ruthenium on the detection of platinum was eliminated by the use of derivative spectrophotometry. Platinum was selectively determined by numerical calculation of the 4th-order-derivative absorption spectrum of the mixture of iodide complexes of both metals.     

The homogeneity of heavy metal deposition on glass fibre filters collected using a high-volume sampler in the vicinity of an opencast chrome mine complex at Kemi,Northern Finland

The homogeneity of heavy metal (Cr, Ni, Cu, Fe and Cd) distribution on glass fibre filters (Munktell MG 160, 203 x 254 mm, 75 g m(-2)) collected using a high-volume sampler (Wedding & Associates) at an opencast chrome mine complex at Kemi, Northern Finland was studied. The heavy metals in the total suspended particulate (TSP) material were analysed by inductively coupled plasma atomic emission spectrometry (ICP-AES) or graphite furnace atomic absorption spectrometry (GFAAS). The glass fibre filters were digested in a microwave oven using a mixture of aqua regia+HF acids. There was significant non-uniform distribution of heavy metals on glass fibre filters. The TSP material containing chromite was very difficult to dissolve by acid digestion. The results from X-ray fluorescence spectrometry (XRF), and from energy filtering transmission electron microscope (EFTEM) equipped with energy dispersive X-ray spectrometer (EDS), showed that insoluble residue left after microwave oven digestion with aqua regia+HF acids was probably partly due to chemical reactions occurring during microwave heating.     

原子荧光法测定土壤中砷的消解方法研究

分别用王水消解法和硫酸-硝酸-高氯酸混合酸消解法处理样品,用原子荧光光度计法测定了砷的含量,比较了两种消解方法砷的测定值和标准值.结果表明,采用混合酸消解法砷的测定值低于标准值,而采用王水消解法可以准确测定土壤中砷含量,实验操作简单方便,结果准确、可靠.     

Distribution of heavy metals of agricultural soils of central Greece using the modified BCR sequential extraction method

The state of heavy metal (Cd, Cu, Ni, Zn, Pb, and Cr) pollution was studied, in 440 texturally different soil profiles in Thessaly, an intensely cultivated region in Central Greece. The study was carried out in 2004 and 2005 on 220 soil samples for each year. Soil samples were classified in three soil orders: Endisols, Alfisols, and Vertisols according to the Soil Taxonomy System. The pseudo-total concentrations of heavy metals were determined by the aqua regia procedure. Heavy metals were also determined after division into four fractions by sequential extraction with (a) acetic acid (exchangeable and specifically adsorbed metals), (b) a reducing agent (bound to Fe/Mn hydroxides), (c) an oxidizing agent (bound to soil organic matter), and (d) aqua regia (bound to mineral structures, residual). The concentrations of all the metals studied were higher in the topsoil (0–30?cm) and lower in the second soil layer (30–60?cm). Concentrations of 70–82% of Cd, 39–64% of Cu, 41–69% of Ni, 29–51% of Zn, 75–89% of Pb, and 52–87% of Cr were found in the first two fractions. Cd appeared to be the most mobile of the metals studied, while Cu and Zn were found in forms associated with soil organic matter. The chemical partitioning patterns of Pb and Cr indicated that these metals are largely associated with the Fe–Mn hydroxides, while Cr was also found in the residual fractions. Significant correlations between heavy metals fractions and soil physicochemical parameters were obtained and discussed.     

Influence of sample pre-treatment on the determination of trace silver and cadmium in geological and environmental samples by quadrupole inductively coupled plasma mass spectrometry

The suitability of three different digestion procedures has been evaluated with regard to the quantitative determination of trace amounts of silver and cadmium in geological and environmental samples. Procedure A: extraction with aqua regia in an open vessel system; Procedure B: extraction with aqua regia in a closed pressurized vessel system; Procedure C: digestion with HF + HNO₃ in a closed pressurized vessel system. It was found that procedure A represented an effective way of extracting analytes from different types of geological samples while the effect of extracting interfering metals is low. Because it is interference-free, poses a low risk of contamination and is time-saving, sample treatment procedure A was preferred. For this digestion procedure, a series of Chinese geological reference materials was determined by ICP-MS, the results of which were found to be in reasonable agreement with the certified values.     

New convenient dissolution of iron-rhodium alloys using hydrochloric acid containing a small amount of nitric acid without heating for an ICP-AES analysis.

A new convenient dissolution method for Fe-Rh alloys has been developed. Aqua regia has been used for the dissolution of rhodium alloy samples. However, it is difficult to dissolve high-concentration rhodium (more than 50 mass%) in aqua regia, because a rhodium-passivity on the alloys surface occurs with nitric acid. By using hydrochloric acid containing a small volume of nitric acid, Fe-Rh (24-64 mass%) alloys could be completely decomposed and dissolved under mild experimental conditions. The principal advantages of this method are simplicity and time-saving compared with other dissolution methods.     

Determination of noble metals in silicate rocks, ores and metallurgical samples by simultaneous multi-element graphite furnace atomic absorption spectrometry with Zeeman background correction

A new method has been developed for rapid determination of mug/g and ng/g amounts of noble metals in silicate rocks, ores and metallurgical samples by attacking with hydrofluoric acid and aqua regia, preconcentration by ion-exchange chromatography and measuring in a simultaneous multi-element graphite furnace atomic absorption spectrometer equipped with a polarized Zeeman background correction device which eliminated interferences from any incompletely separated common elements. The method was tested for Ru, Rh, Pt, Ir, Pd, Ag and Au with three Canadian certified reference materials, and then applied to the determination of ng/g amounts of these elements in four new Canadian candidate reference materials.     

一次消解土壤样品测定汞、砷和硒

建立了测定土壤中3种挥发性元素(汞、砷、硒)的一次消解方法,确定以程序控温石墨自动消解仪+王水-氢氟酸-硼酸络合敞开体系为最佳消解体系,采用氢化物发生-原子荧光光谱法(HG-AFS)分别测定同一消解液中汞、砷、硒的含量.采用国家标物中心有证标准物质土壤环境样品GSS-1~GSS-8进行了方法验证,结果均符合标准偏差的允许范围.此消解方法相比于现行标准方法,避免了针对各元素的分次处理,简化了消解步骤,节省了前处理时间,减少了试剂消耗,提高了实验效率,适用性广、灵敏度高、检出限低,尤其适合批量样品的微量/痕量元素分析,可作为一种大规模土壤样品中重金属污染监测和治理的快捷方法.     

Preconcentration and matrix separation of precious metals in geological and related materials using metalfix-chelamine resin prior to inductively coupled plasma mass spectrometry

A method for determining Au, Pt, Pd, Ir and Rh in ores and silicates and Fe-formation rocks is described. Sample decomposition was carried out with aqua regia and HF, followed by fusion of any insoluble residue with Na₂2O₂ in a glassycarbon crucible. The precious metals were separated, in 1.2 mol dm⁻³ HCl media, from the matrix elements by ion-exchange, using a mini-column with tetraethylenepentamine (metalfix-chelamine) resin. The resin was destroyed with HNO₃ and H₂O₂ in a high-pressure vessel assisted by microwave heating, and the precious elements were determined by flow-injection inductively coupled plasma mass spectrometry. The sample treatment, optimization of analytical variables and measurable concentration levels are discussed. The limits of quantification (10 sd_{n − 1}) calculated from a procedural blank sample solution were 4.0, 2.0, 1.5, 0.8 and 0.5 ng g⁻¹ for Au, Pt, Pd, Ir and Rh, respectively. The accuracy of the proposed method was tested by determining these elements in SARM 7 platinum-ore reference material. For all the analytes, the relative standard deviation of the combined dissolution, separation and determination methods was below 3.5% (n = 6).