Trace determination of lanthanum,cerium, and praseodymium based on adsorptive stripping voltammetry

A sensitive stripping procedure is described for quantifying lanthanum, cerium and praseodymium ions, based on the controlled adsorptive accumulation of the lanthanide/o- cresolphthalexon complex onto the static mercury drop electrode. The effect of various operational parameters on the stripping response is discussed. A 20-min accumulation period coupled with differential pulse measurement of the current resulting from the adsorbed complex permits quantitation down to the 1 × 10^?10 M level. For concentrations ranging from 2.5 × 10^?8 M to 2.5 × 10^?9 M, a 0.5- to 4-min accumulation period is sufficient. The relative standard deviation ar the 7 × 10^?8 M level ranges from 1 to 6%.     

Comparative study of potentiometric and amperometric tissue-based electrodes for oxalate

Acetone-precipitated pulp from banana skins is physicall entrapped at the tip of a carbon dioxide gas-sensor and on a hydrogen peroxide sensor probe to determine oxalate potentiometrically and amperometrically in aqueous solution and inurine. The enzyme present in the tissue is oxalate oxidase. The potentiometric response has a slope of 47–50 mV/decade for 1 × 10^?4 M–2 × 10^?3 M oxalate with a detection limit of 2 × 10^?5 M. The amperometric response is linear for 2 × 10^t-5–3 × 10^?4 M oxalate with a dectection limit of 2 × 10^?6 M. Average recoveries of oxalate added to aqueous samples were 96.2% and 98.0%, and average relative standrd deviations were 3.8% and 3.6% for the potentiometric and amperometric systems, respectively. Oxalate was determined in six control urine samples, with relative errors of about 2.5%, by both electrode systems after a simple clean-up.     

Flow-injection determination of paraoxon by inhibition of immobilized acetylcholinesterase

Two flow-injection methods (continuous-flow and stopped-flow) are proposed for the determination of paraoxon, applying the dual-injection technique and spectrophotometric detection. They are based on the inhibition of the acetylcholinesterase-catalysed hydrolysis of α-naphthyl acetate and subsequent reaction of the α-naphthol produced with p-nitrobenzenediazonium fluoroborate. For the continuous-flow system the calibration graph was linear from 5 × 10^?7 to 1.5 × 10^?5 M, the relative standard deviation (r.s.d.) (n=6) for an 8 × 10^?6 M standard was 1.4%, the limit of detection (3σ) was 4 × 10^?7 M and the sample throughput was ca. 60 h^?1. For the stopped-flow system the linear range was from 1 × 10^?8 to 4 × 10^?7 M, the r.s.d. for a 2.5 × 10^?7 M standard was 0.9%, the limit of detection was 8 × 10^?9 M and the sample throughput was 30 h^?1.     

A novel rhodamine-based turn-on probe for fluorescent detection of Au3+ and colorimetric detection of Cu2+

In this work, we design and synthesize the novel probe RC through introduction the 1-aza-4,13-dithia-15-crown-5 ring into the structure of rhodamine 6G hydrazide, where the N atom of crown ring is responsible for quenching of rhodamine fluorescence. The compound obtained behaves as multifunctional cation sensor providing selective fluorescent response to Au³⁺ and selective colorimetric response to Cu²⁺ ions in aqueous acetonitrile (1/1, v/v) at pH 7.0. The use of 10^?5?M RC solution allowed reliable determination of target cations in the presence of a wide range of environmentally relevant ions with detection limits of 2?×?10^?6?M and 5?×?10^?7?M for gold and copper, respectively.     

A multivariate calibration procedure for the tensammetric determination of detergents

A multivariate calibration procedure based on singular value decomposition (SVD) and the Ho-Kashyap algorithm is used for the tensammetric determination of the cationic detergents Hyamine 1622, benzalkonium chloride (BACl), N-cetyl-N,N,N-trimethylammonium bromide (CTABr) and mixtures of CTABr and BACl. The sensitivity and accuracy depend strongly on the nature of the detergent. Acceptable accuracy is obtained with a two-step calculation procedure in which calibration constants for the total concentration range of interest are used to guide the choice of a more specific set of calibration constants which are valid for a much smaller concentration span. For Hyamine 1622, concentrations in the range 5 × 10^?6?2 × 10^?4 M could be determined with an accuracy of ± 10^?6 M. For CTABr, these numbers were 3 × 10^?6?2 × 10^?4 M and ± 5 × 10^?7 M; for BACl, they were 2 × 10^?3?9 × 10^?2 g l^?1 and ± 1 × 10^?3 g l^?1. In the mixtures of CTABr and BACl, the accuracies were ± 3 × 10^?6 M and × 1 × 10^?3 g l^?1, respectively.     

A Highly Sensitive Quinoline-Containing Rhodamine B Thiohydrazide Based Fluorescent Probe for Hg2+ in Aqueous Solution and Living Cells

Quinoline-appended rhodamine B thiohydrazide based fluorescent probe was designed and applied in fluorescent detections of mercury ions in both aqueous solution and living cells. The signal change of the probe is based on a specific metal ion induced reversible ring-opening mechanism of a rhodamine B thiohydrazide. The probe exhibits a dynamic response concentration range for Hg²⁺ from 1.0 × 10^?8 to 1.0 × 10^?5 M with a detection limit of 8.5 × 10^?9 M. The fluorescent probe is pH independent in medium condition and exhibits high selectivity over other common metal ions.     

Cobalt(II)-selective membrane electrode based on N,N′-di(thiazol-2-yl)formimidamide

A new PVC-membrane electrode for Co²⁺ ions based on N,N′-di(thiazol-2-yl)formimidamide (TF) as membrane carrier has been developed. The electrode resulted in Nernstian response (29.5?±?0.4?mV decade^?1) for Co²⁺ ion over a wide concentration range (2.5?×?10^?7 ?1.0?×?10^?1?M) with a detection limit of 6.1?×?10^?8?M. The sensor has a response time of about 10?s, and can be used for at least 2 months without observing any deviation from the Nernstain response. The electrode revealed good selectivity towards cobalt(II) ion over a wide variety of alkali, alkaline earth, transition, and heavy metal ions and could be used in the pH range 2.0–7.0. The electrode was used for determination of Co²⁺ in real samples.     

Mediated amperometric biosensor for hypoxanthine based on a hydroxymethylferrocene-modified carbon paste electrode

An amperometric enzyme electrode for the determination of hypoxanthine in fish meat is described. The hypoxanthine sensor was prepared from xanthine oxidase immobilized by covalent binding to cellulose triacetate and a carbon paste electrode containing hydroxymethylferrocene. The xanthine oxidase membrane was retained behind a dialysis membrane at a carbon paste electrode. The sensor showed a current response to hypoxanthine due to the bioelectrocatalytic oxidation of hypoxanthine, in which hydroxymethyiferrocene served as an electron-transfer mediator. The limit of detection is 6 × 10^?7 M, the relative standard deviation is 2.8% (n=28) and the response is linear up to 7 × 10^?4 M. The sensor responded rapidly to a low hypoxanthine concentration (7 × 10^?4 M), the steady-state current response being achieved in less than 1 min, and was stable for more than 30 days at 5 ° C. Results for tuna samples showed good agreement with the value determined by the conventional method.     

Enzyme electrodes for the sugar substitute aspartame

A sensor of aspartame (l-aspartyl-l-phenylalanine methyl ester) is prepared by chemical immobilization of l-aspartase on an ammonia-selective electrode. Semi logarithmic response (E vs. log C) was observed in the 1 × 10^?3?1 × 10^?2 M range with a slope of ?30 mV/decade. The sensor is stable for more than eight days. The probe is successfully used for the assay of aspartame in commercially available sweeteners.     

Optical-fiber sensor based on the second-harmonic emission of a near-infrared semiconductor laser as light source

Second-harmonic emission from a near-infrared semiconductor laser is used as the light source for fluorimetry. The efficiency of the second-harmonic generation is 2.5×10^?6; at 390 nm, the power achieved is 50 nW when a 20-mW semiconductor laser (780 nm) is used. For fluorimetric determination of 7-diethylamino-4-methylcoumarin, the calibration plot is linear in the range 0–8×10^?7 M, the detection limit being 5×10^-∞ M (S/N=3 ). The generated ultraviolet emission is used with benzo (ghi)perylene in an optical-fiber sensor for oxygen (0–15%).     

Sodium ion-selective membrane electrode based on a new crown ether

A sodium ion-selective PVC membrane electrode based on di(o-methoxy)stilbenzo-24-crown-8 is reported. The electrode gives a near-Nernstian response in the range 9×10^?6–1×10^?2 M sodium ion and can be used in the pH range 5–8.5. Selectivity coefficients are 1.8×10^?1 (K⁺), 2.0×10^?4 (Li⁺) 2.5×10^?2 (NH⁺₄) and about 10^?4 for Mg²⁺, Ca²⁺ and Ba²⁺.     

A nafion/crown ether film electrode and its application in the anodic stripping voltammetric determination of traces of silver

Glassy carbon electrodes are modified by coating with dicyclohexyl-18-crown-6 in Nafion-117. The electrode is used for a very sensitive anodic stripping voltammetric determination of silver. High sensitivity is obtained owing to the release of crown molecules from the silver-crown complex during the deposition. The detection limit is 2×10^?12 M after electrodeposition for 30 min. The recommended supporting electrolyte is 4×10^?3–7×10^?3 M potassium chloride in 0.01 M nitric acid with a deposition potential of ?0.30 V vs. SCE and a linear potential scan. Three typical calibration graphs were linear over the range 2×10^?11–1×10^?8 M for deposition times of 30, 20 and 8 min, respectively. The silver content of reagent-grade ammonium nitrate was found to be 0.48×10^?4% with a relative standard deviation of 3.7% (n=7) for parallel determinations.     

Determination of acetaldehyde by a chemiluminescence method

The determination of acetaldehyde was achieved by monitoring the chemiluminescence emission from the luminol-potassium hexacyanoferrate (III) reaction in the presence of xanthine oxidase. The linear range was three orders of magnitude, the detection limit (2σ) was 4 × 10^?7 M and the relative standard deviation (n = 5) was 10.6% for 4.3 × 10^?7 M. No interference was observed from seven organic and inorganic species at a 1000-fold excess relative to a concentration of 1 × 10^?5 M acetaldehyde.     

Potentiometric sensors based on organic ion exchangers for determining tetraalkylammonium salts

Potentiometric sensors with plasticized polymer membranes based on organic ion exchangers, tetraalkylammonium dodecyl sulfates (benzyldimethyldodecylammonium, benzyldimethyltetradecylammonium, dimethyldistearylammonium), have been proposed for the determination of quaternary ammonium salts in model solutions and KATAPAV technical solutions. The thermal stability, composition, and solubility product have been estimated. It has been shown that ion associates are stable to 60?C70°C, K _S varies in the range from 2 × 10^?8 to 5 × 10^?10. The basic electrochemical parameters of the sensors have been determined as well, such as linearity ranges of the electrode function (5 × 10^?5 (5 × 10^?6)?1 × 10^?2 (1 × 10^?3) M) and slopes of the electrode functions (47?C59 mV/pc), response time (60?C90 sec), potential drift (2?C3 mV/day), operation period (3?C4 months), limits of detection for tetramethylammonium salts (1 × 10^?5?4 × 10^?7 M).     

Polymer-modified glassy carbon electrode for the electrochemical detection of quinine in human urine and pharmaceutical formulations

Glassy carbon electrode was modified by electropolymerization of 4-amino-3-hydroxynaphthalene sulfonic acid. Cyclic voltammetric study of quinine showed higher current response at the modified electrode compared to the bare and activated glassy carbon electrodes in pH 7.0 phosphate buffer solution. Under optimized conditions, a calibration curve was obtained by square wave voltammetry at the modified electrode. The linear relationship between the peak current and the concentration of quinine in the range of 1.0?×?10^?7 to 1.0?×?10^?5 M was I _pa (in microamperes)?=?6.26C (in micromolars)?+?0.2997 (R ²?=?0.999). The detection limit calculated (S/N?=?3) was 1.42?×?10^?8 M, which is much lower than similar reports. The method was successfully applied for the determination of quinine in spiked human urine, and pharmaceutical formulations and recovery values >90 % were obtained.     

Nanostructured platform for the detection of Neisseria gonorrhoeae using electrochemical impedance spectroscopy and differential pulse voltammetry

We report on a nanocomposite based genosensor for the detection of Neisseria gonorrhoeae, a bacterium causing the sexually transmitted disease gonorrhoea. Amino-labeled probe DNA was covalently immobilized on electrochemically prepared polyaniline and iron oxide (PANI-Fe₃O₄) nanocomposite film on an indium tin oxide (ITO) electrode. Scanning electron microscopy, transmission electron microscopy, electrochemical impedance spectroscopy (EIS) and differential pulse voltammetry (DPV) techniques have been employed to characterize surface of the modified electrode. The genosensor has detection limits of 1?×?10^-15 M and 1?×?10^-17 M, respectively, using the EIS and DPV techniques. This biosensor can discriminate a complementary sequence from a single-base mismatch and from non-complementary DNA, and has been utilized for detection of DNA extracted from N. gonorrhoeae culture, and from patient samples with N. gonorrhoeae. It is found to exhibit good specificity for N. gonorrhoeae species and shows no response towards non-gonorrhoeae type of Neisseria species (NgNs) and other gram-negative bacterias (GNBs). The affinity constant for hybridization calculated using the Langmuir adsorption isotherm model is found to be 3.39?×?10⁸ M^-1.

Poly(4-vinylpyridine-co-aniline)-modified electrode—synthesis, characterization, and application as cadmium(II) ion sensor

A poly(4-vinylpyridine-co-aniline) (poly(4VP-co-Ani))-based solid-state ion sensor for cadmium (Cd) was developed. This was obtained from studies done on a number of selected monomers electropolymerized onto a poly(4vinylpyridine) (P4VP)-modified graphite pencil rod, surface characterizing them and then analyzing their performances as a Cd(II) ion sensor. Among them, the membrane of poly(4VP-co-Ani) at a mole ratio of 0.05:0.15 was found to be the best. The fabricated poly(4VP-co-Ani) solid-state electrode had a linear response of 1?×?10^?6 to 1?×?10^?2?M Cd²⁺, slope of 29.4?±?0.5 mV decade^?1, detection limit of 7.94?×?10^?7?M Cd²⁺, and response time of 15 s at pH 4.5–8.5 with excellent selectivity. The sensor was operationally stable within a period of 3 months. The proposed sensor was tested for determination of Cd²⁺ in environmental, plant, and pharmaceutical samples. The analyses were comparable to the standard atomic absorption spectrophotometric method.     

A Bipotentiostat Based 4‐Electrode Detection System for HPLC Analysis

With the assist of a microcomputer interfacing, a bipotentiostat in corporated 4‐electrode detection system was developed as a versatile electrochemical detector for HPLC. An amperometric chromatogram and two three‐dimensional chromatovoltammograms characterizing the electrochemical characteristics of analytes can be obtained in a single chromatographic run. By following the three operation modes developed, both the oxidizable and reducible analytes contained in sample solutions can be determined. The analytical capability of the 4‐electrode detection system was demonstrated by the analysis of solutions containing hydroquinone, catechol and ascorbic acid. From the calibration graphs obtained, linear coefficients better than 0.9992 were found for hydroquinone and catechol in a concentration range of 1.0 × 10^?4 to 1.0 × 10^?7 M, and a linear coefficient of 0.9929 was found for ascorbic acid in a concentration range of 1.0 × 10^?4 to 1.0 × 10^?6 M. The detection limits (based on S/N = 3) found were about 1.0 × 10^?7 M for hydroquinone and catechol and was 1.0 × 10^?6 M for ascorbic acid.     

An amperometric monoamine oxidase biosensor for determining some antidepressants

An amperometric biosensor based on a platinum screen-printed electrode and immobilized monoamine oxidase is developed to determine antidepressants of different classes. Petylyl, pyrazidol, and flu-oxetine can be determined with determination limits of 8 × 10^?9, 8 × 10^?7, and 8 × 10^?10 M, respectively. A procedure is proposed for determining fluoxetine in tablets. It is shown that petylyl can be selectively determined by an immunochemical technique using the developed biosensor and immobilized antibodies in the concentration range from 1 × 10^?4 to 1 × 10^?8 M.     

Stripping voltammetry of manganese based on chelate adsorption at the hanging mercury drop electrode

A novel electrochemical stripping approach for the trace measurement of manganese is presented. The metal chelate with erichrome black T is adsorbed on a hanging mercury drop electrode, and the subsequent reduction current of the accumulated chelate is measured by voltammetry. Adsorptive preconcentration for 5 min results in a detection limit of 6 × 10^?10 M (32 l^?1). Cyclic voltammetry is used to characterize the redox and interfacial processes. Optimal experimental conditions include a 0.02 M piperazine-N,N′-bis(2-ethanesulfonic acid) solution (pH 12) containing 1 × 10^?6 M eriochrome black T, a preconcentration potential of ?0.80 V, and a linear potential scan. The response is linear up to 2.9 × 10^?7 M, and the relative standard deviation at 1.8 × 10^?7 M is 1.5%. The effects of possible interferences from metal ions or organic surfactants are evaluated.