Charging and aggregation of positively charged latex particles in the presence of anionic polyelectrolytes

Charging behavior and colloidal stability of amidine latex particles are studied in the presence of poly(sodium styrene sulfonate) (PSS) and KCl. Detailed measurements of electrophoretic mobility, adsorbed layer thickness, and aggregation (or coagulation) rate constant on varying the polymer dose, molecular mass of the polymer, and ionic strength are reported. Polyelectrolyte adsorption leads to the characteristic charge reversal (or overcharging) of the colloidal particles at the isoelectric point (IEP). In accordance with classical Derjaguin-Landau-Verwey-Overbeek (DLVO) theory, uncharged particles tend to aggregate because of van der Waals attraction, whereas charged particles are stabilized by electrical double layer repulsion. Attractive patch-charge interactions originating from the laterally inhomogeneous structure of the adsorbed polymer substantially decrease the suspension stability or even accelerate the aggregation rate beyond diffusion control. These electrostatic non-DLVO forces become progressively important with increasing molecular mass of the polymer and the ionic strength of the solution. At higher polymer dose of typically 10 times the IEP, one observes the formation of a saturated layer of the adsorbed polymer with a thickness of several nanometers. Its thickness increases with increasing molecular mass, whereby the layer becomes increasingly porous. This layer does not seem to be involved in the suspension stabilization, since at such high polymer doses the double layer repulsion has attained sufficient strength to stabilize the suspension.     

Study of the adsorption of F(ab')2 onto polystyrene latex beads

An experimental investigation on the adsorption of F(ab')₂ from rabbit IgG onto polystyrene (PS) latex beads is described. All adsorption isotherms were of high affinity and showed well-defined plateaus. Maximum protein adsorption was found around the average isoelectric point (IEP) of the dissolved protein. According to the findings, the F(ab')₂ adsorption on the polystyrene surface is strongly irreversible with respect to ionic strength changes. The pH changes, however, exert a certain effect on the adsorption-desorption process of F(ab')₂ on negatively charged polystyrene surfaces. In order to determine the role played by the electrostatic forces in the F(ab')₂ adsorption onto negatively charged latex particles, an electrokinetic study of the protein-latex complexes has also been carried out. The isoelectric pH of the F(ab')₂-PS complexes is always smaller than the IEP of the dissolved F(ab')₂, indicating that the PS surface charge must partly compensate the positive charge on the protein. Finally, a comprehensive study on the colloidal stability of the sensitized latex beads was performed.     

Aqueous latex/ceramic nanoparticle dispersions: colloidal stability and coating properties

The effect of pH on the colloidal stability of aqueous dispersions containing antimony-doped tin oxide (ATO) or indium tin oxide (ITO) nanoparticles and poly(vinyl acetate-acrylic) copolymer (PVAc-co-acrylic) latex particles was investigated using experimental observations and Derjiaguin, Landau, Verwey and Overbeek (DLVO) theory. The microstructure, electrical properties and optical properties of composite coatings prepared from various dispersions were also studied. Zeta potential measurements revealed that the isoelectric point (IEP) of ATO nanoparticles was below pH 2.0, that of ITO nanoparticles was at pH approximately 6.0 and that of PVAc-co-acrylic latex was at pH approximately 2.0. ATO/PVAc-co-acrylic dispersions prepared at pH 3 were stable, but those prepared at pH 1.5 formed aggregates, which settled quickly with time. DLVO theory predictions are in accord with these results. Stable ITO/PVAc-co-acrylic dispersions are obtained at a pH of 3.0 and 11.0, but dispersions are not stable at a pH of 6.0, the IEP of ITO. At a pH of 3.0, DLVO results predict attraction between ITO particles and latex particles. Dispersion pH affected the microstructures and properties of ATO (or ITO)/PVAc-co-acrylic coatings. Suspensions that formed aggregates produced coatings with lower percolation thresholds and lower transparencies than those produced from stable suspensions.     

Elaboration of hydrophilic aminodextran containing submicron magnetic latex particles

Aminodextran containing submicron magnetic latex particles were prepared in two steps: (a) transformation of oil-in-water magnetic emulsion into structured magnetic latex particles via combination of seed and miniemulsion-like polymerization process and (b) immobilization (adsorption and chemical grafting) of prepared aminodextran onto negatively charged seed magnetic latex particles. The elaborated magnetic latex particles were characterized in terms of particle size, size distribution, morphology, surface charge density, chemical composition, magnetic properties, and also colloidal stability. The results showed that the morphology of the prepared seed magnetic latex is core–shell like and the cationic latex particles are hydrophilic and of high colloidal stability, irrespective of the aminodextran immobilization process.     

Colloidal stability of dextran-modified latex particles toward adsorption of concanavalin A

The colloidal stability of the dextran-modified poly(methyl methacrylate) (PMMA) latex particles toward adsorption of a carbohydrate-binding protein, concanavalin A (Con A), is primarily controlled by the charge neutralization mechanism. Formation of a crosslinked network structure via the specific affinity interactions between the dimeric Con A molecules and the dextran molecules anchored onto different latex particles may also have an impact on the coagulation kinetics. Judging from the data of coagulation kinetics, the colloidal stability of the latex particles toward added Con A in the decreasing order is: latex particles without dextran modification>latex particles with a dextran content of 2.15%>latex particles with a dex-tran content of 1.24% based on total polymer weight (PMMA+grafted dextran). The coagulation mechanisms involved in the adsorption of Con A onto the latex particles have been proposed to explain these experimental data. Charge neutralization of the negatively charged latex particles by adsorption of the positively charged Con A is the predominant destabilization mechanism. The ratio of the number of dextran active sites to that of Con A molecules plays an important role in the formation of the crosslinked network structure. The electrolytes in water cause a reduction in the electrostatic repulsion force among the interactive latex particles, but this ionic strength effect is not significant in comparison with charge neutralization. Received: 22 October 1997 Accepted: 24 December 1997     

Electrokinetic behavior and colloidal stability of polystyrene latex coated with ionic surfactants

This work is focused on analyzing the electrokinetic behavior and colloidal stability of latex dispersions having different amounts of adsorbed ionic surfactants. The effects of the surface charge sign and value, and the type of ionic surfactant were examined. The analysis of the electrophoretic mobility (mu(e)) versus the electrolyte concentration up to really high amounts of salt, much higher than in usual studies, supports the colloidal stability results. In addition, useful information to understand the adsorption isotherms was obtained by studying mu(e) versus the amount of the adsorbed surfactant. Aggregation studies were carried out using a low-angle light scattering technique. The critical coagulation concentrations (ccc) of the particles were obtained for different surfactant coverage. For latex particles covered by ionic surfactants, the electrostatic repulsion was, in general, the main contribution to the colloidal stability of the system; however, steric effects played an important role in some cases. For latices with not very high colloidal stability, the adsorption of ionic surfactants always improved the colloidal stability of the dispersion above certain coverage, independently of the sign of both, latex and surfactant charge. This was in agreement with higher mobility values. Several theoretical models have been applied to the electrophoretic mobility data in order to obtain different interfacial properties of the complexes (i.e., zeta potential and density charge of the surface charged layer).     

Electrostatic interactions between amphoteric latex particles and proteins

The electrostatic interactions between amphoteric polymethyl methacrylate latex particles and proteins with different pI values were investigated. These latex particles possess a net positive charge at low pH, but they become negatively charged at high pH. The nature and degree of interactions between these polymer particles and proteins are primarily controlled by the electrostatic characteristics of the particles and proteins under the experimental conditions. The self-promoting adsorption process from the charge neutralization of latex particles by the proteins, which have the opposite net charge to that of the particles, leads to a rapid reduction in the zeta potential of the particles (in other words colloidal stability), and so strong flocculation occurs. On the other hand, the electrostatic repulsion forces between similarly charged latex particles and the proteins retard the adsorption of protein molecules onto the surfaces of the particles. Therefore, latex particles exhibit excellent colloidal stability over a wide range of protein concentrations. A transition from net negative charge to net positive charge, and vice versa (charge reversal), was observed when the particle surface charge density was not high enough to be predominant in the protein adsorption process.     

Super-stoichiometric charge neutralization in particle-polyelectrolyte systems

The adsorption of poly(vinylamine) (PVA) on poly(styrene sulfate) latex particles is studied, and its consequences on the charging behavior and suspension stability are investigated. The adsorption process is assessed by batch depletion experiments and time-resolved electrophoretic mobility measurements. The adsorption of PVA appears to be basically irreversible. The rate of adsorption decreases with decreasing polymer dose. At low polymer dose, the polymer coverage corresponds to the amount of the polyelectrolyte added, while at high polymer dose, the polymer coverage saturates the surface. Stability ratios are determined by dynamic light scattering, and strongly depend on the polymer dose and salt level. The aggregation is rapid near the isoelectric point (IEP), and it slows down when moving away from it. The charge neutralization is highly nonstoichiometric with charging ratios (CR) larger than unity, meaning that several charges on an adsorbed polyelectrolyte chain are necessary to neutralize a single charge on the particle surface. By comparing the IEP for particles and polyelectrolytes of different charge densities, we find a strong dependence of the CR on the mismatch between the average distances between individual charges on the surface and on the polyelectrolyte. A simple model is proposed to explain this trend.     

Colloidal stability of chitosan-modified poly(methyl methacrylate) latex particles

Experiments of coagulation kinetics were used to study the influence of the electrolyte concentration on the colloidal stability of cationic poly(methyl methacrylate) latex particles with various degrees of chitosan modification. For the chitosan-free latex products prepared by various levels of 2,2′ azobis(2-amidinopropane) dihydrochloride (V-50) at constant pH, the critical coagulation concentration (ccc) increases with increasing V-50 concentration, due to the enhanced particle surface charge density. On the other hand, the chitosan-modified latex products at constant pH do not exhibit very different values of ccc. This result is attributed to the counterbalance between two opposite effects related to the grafted chitosan, that is, the increased particle surface charge density and the enhanced shift of the particle's shear plane toward the aqueous phase with the chitosan content. The ccc of the latex products with various degrees of chitosan modification decreases significantly when the pH increases from 3 to 7. This is because the degree of ionization of the surface amino groups (the particle surface charge density) decreases with increasing pH. As a result, the stability of the colloidal system decreases significantly with increasing pH. The apparent Hamaker constant and diffuse potential were obtained from the coagulation kinetics data. These two parameters along with the zeta potential and particle size data for the latex samples taken immediately after the end of the coagulation experiments were also used to study the effect of ionic strength on the colloidal stability of the latex particles. Received: 10 October 1998 Accepted in revised form: 16 December 1998     

Charging and aggregation of latex particles by oppositely charged dendrimers

Poly(amidoamine) (PAMAM) dendrimers were shown to adsorb strongly on negatively charged latex particles, and their effect on the particle charge and aggregation behavior was investigated by light scattering and electrophoretic mobility measurements. Time-resolved simultaneous static and dynamic light scattering was used to measure absolute aggregation rate constants. With increasing dendrimer dose, the overall charge could be tuned from negative to positive values through the isoelectric point (IEP). The aggregation is fast near the IEP and slows down further away. With decreasing ionic strength, the region of fast aggregation narrows and the dependence of the aggregation rate on the dendrimer dose is more pronounced. Surface charge heterogeneities become important for higher dendrimer generations. They widen the fast aggregation region, reduce the dependence of the aggregation rate on the dendrimer dose, and lead to an acceleration of the rate in the fast aggregation regime near the IEP. The ratio of the dendrimer charge and the particle charge exceeds the stoichiometric ratio of unity substantially and further increases with increasing generation. The tentative interpretation of such superstoichiometric charge neutralization involves coadsorption of anions and the finite thickness of the adsorbed dendrimer layer.     

Tailoring of carboxyl‐decorated magnetic latex particles using seeded emulsion polymerization

In this research, submicron and carboxyl‐functionalized magnetic latex particles were elaborated by using seeded emulsion polymerization technique in presence of oil‐in‐water (o/w) magnetic emulsion as seed. The polymerization conditions were optimized in order to get well‐defined latex particles with magnetic core and polymer shell bearing carboxylic (–COOH) functionality. Starting from (o/w) magnetic emulsion as seed, synthesis process was performed by copolymerization of styrene (St) monomer with the cross‐linker divinylbenzene (DVB) in presence of 4,4′‐azobis(4‐cyanopentanoic acid) (ACPA) as a carboxyl‐bearing initiator. The prepared magnetic latex particles were first characterized in terms of particle size, chemical composition, morphology, magnetic properties, magnetic content, and colloidal stability using various techniques, e.g. particle size analyzer using dynamic light scattering (DLS) technique, Fourier transform infrared, transmission electron microscopy, vibrating sample magnetometer, thermogravimetric analysis, and zeta potential measurements as a function of pH of the dispersion media, respectively. The prepared magnetic latex particles were then used as second seed for further functionalization with methacrylic acid (MAA) in order to enhance carboxylic groups on the magnetic particle's surface. The results showed that final magnetic latex particles possessed spherical morphology with core‐shell structure and enriched carboxylic acid functionality. More importantly, they exhibited superparamagnetism with high magnetic content (58.42 wt%) and high colloidal stability, which considered as the main requirements for their application in the biomedical diagnostic domains. Copyright © 2017 John Wiley & Sons, Ltd.     

Stability in Colloidal Mixtures Containing Particles with a Large Disparity in Size

An experimental approach, based on turbidity measurements, is proposed for studies of the stability in colloidal mixtures containing particles with large disparity in size. The main advantage of this approach is that it permits investigations even under conditions of comparable particle number concentrations of the two colloidal populations. Binary mixtures containing a poly(vinyl acetate) (PVAc) latex and a Ludox AS-40 silica sol were investigated. The silica particles were much smaller than the latex ones. The experimental stability factors were compared with the theoretical values computed on the basis of the Kihira-Ryde-Matijevic model (J. Chem. Soc., Faraday Trans. 88(16), 2379 (1992)) for interaction between spherical particles with unevenly distributed surface charges. All the experimental results support the idea that, even when both sols are negatively charged, the small silica particles are adsorbed onto the latex surface. Under these conditions, the heteroaggregates, which are composed of PVAc cores surrounded with silica particles, can be modeled as PVAc particles having "modified" surface characteristics (i.e., average Stern potential and varying extents of the surface charge segregation). Copyright 2001 Academic Press.     

Measurements and theoretical interpretation of points of zero charge/potential of BSA protein

The points of zero charge/potential of proteins depend not only on pH but also on how they are measured. They depend also on background salt solution type and concentration. The protein isoelectric point (IEP) is determined by electrokinetical measurements, whereas the isoionic point (IIP) is determined by potentiometric titrations. Here we use potentiometric titration and zeta potential (ζ) measurements at different NaCl concentrations to study systematically the effect of ionic strength on the IEP and IIP of bovine serum albumin (BSA) aqueous solutions. It is found that high ionic strengths produce a shift of both points toward lower (IEP) and higher (IIP) pH values. This result was already reported more than 60 years ago. At that time, the only available theory was the purely electrostatic Debye-Hu?ckel theory. It was not able to predict the opposite trends of IIP and IEP with ionic strength increase. Here, we extend that theory to admit both electrostatic and nonelectrostatic (NES) dispersion interactions. The use of a modified Poisson-Boltzmann equation for a simple model system (a charge regulated spherical colloidal particle in NaCl salt solutions), that includes these ion specific interactions, allows us to explain the opposite trends observed for isoelectric point (zero zeta potential) and isoionic point (zero protein charge) of BSA. At higher concentrations, an excess of the anion (with stronger NES interactions than the cation) is adsorbed at the surface due to an attractive ionic NES potential. This makes the potential relatively more negative. Consequently, the IEP is pushed toward lower pH. But the charge regulation condition means that the surface charge becomes relatively more positive as the surface potential becomes more negative. Consequently, the IIP (measuring charge) shifts toward higher pH as concentration increases, in the opposite direction from the IEP (measuring potential).     

pH-responsive aqueous foams stabilized by ionizable latex particles

We have designed a type of colloidal particle whose surface characteristics are sensitive to the pH of the aqueous phase in which they are dispersed. Particles of polystyrene latex stabilized by poly(acrylic acid) can act as stabilizers of aqueous foams by adsorbing at the air-water surface. Foams can be prepared and stabilized only at pH values below the isoelectric point where particles are either uncharged and flocculated or acquire a positive charge. At high pH where particles are anionic, no foam forms. This influence of pH on foamability and stability applies to both pH-dependent and pH-responsive systems.     

Synthesis and characterization of amphoteric latex particles

Stable monodisperse amphoteric latex particles were prepared by the semibatch surfactant-free emulsion copolymerization of methyl methacrylate and methacrylic acid (MAA) initiated by 2,2'-azobis(2-amidinopropane) dihydrochloride (V-50). These submicron particles have a net positive charge, which is attributed to the ionized amino group at low pH. In contrast, they become negatively charged owing to the ionized carboxyl group at high pH. There exists a pH at which these particles exhibit a net charge of zero (pI). At a constant level of V-50, the pI value of these latices decreases with increasing amount of MAA used in the polymerization recipe. The effect of pH on the colloidal stability of these amphoteric latices toward the addition of the negatively charged latex was investigated. The resultant coagulation kinetics was used to study the electrostatic interaction between the amphoteric particles and negatively charged particles.     

Synthesis of amphoteric polystyrene particles using mixed initiators

The synthesis of amphoteric polystyrene latex particles, using a mixture of cationic (amidinium based) and anionic (carboxylic acid based) initiators in a surfactant-free emulsion polymerization reaction is investigated; this extends work described in an earlier paper by Bolt et al. Electrophoretic mobility measurements show the effect of the initiator concentration ratio on the isoelectric point (IEP) of the particles. A good correlation with theoretical predictions is obtained. Particle size and polydispersity are determined as a function of the lag time between the addition of each initiator. An increase in particle size and polydispersity is observed at short lag times. It is shown that this is due to the ratio of the cationic to anionic surface charge approaching unity during the reaction. At long lag times an increase in polydispersity may occur due to late-stage, secondary nucleation upon addition of the second initiator. Increasing the reaction pH to reduce the degree of ionization of the cationic initiator greatly reduces the polydispersity and has a significant effect on the IEP of the particles. This effect is ascribed to the burial of a fraction of the neutral amidine groups below the particle surface due to their increased solubility in the monomer. Slow addition of the second initiator was found to reduce the polydispersity of the particles, while maintaining an IEP value consistent with that expected for the ratio of initiators added.     

Polymer mediated peptide immobilization onto amino-containing N-isopropylacrylamide-styrene core-shell particles

Monodisperse cationic core-shell latex particles have been prepared using a shot polymerization process, with N-(3-aminopropyl)-methacrylamide-hydrochloride (APMH) as the functional monomer. The final latexes were characterized with respect to final polymerization conversion, water soluble polymer formation, particle size and size distribution, surface charge density and electrokinetic properties. Then the covalent grafting of maleic anhydride-alt-methyl vinyl ether (MAMVE) copolymer onto aminated latex particles was investigated. The most efficient conditions to obtain derivatised particles with no alteration of the colloidal stability were to control both polymer amount/latex particles concentration ratio and the mixing method of the two species. The charge inversion of the hydrolysed MAMVE functionalized particles was demonstrated by measuring the electrophoretic mobility as a function of pH. Finally, the covalent binding approach was implemented with peptide-MAMVE conjugates, confirming the great potential of this promising methodology for the preparation of reactive latex particles bearing peptides.     

Hybrid niosome complexation in the presence of oppositely charged polyions

We have investigated the formation of complexes between negatively charged niosomal vesicles (hybrid niosomes), built up by dicethylphosphate [DCP], Tween 20 and Cholesterol, and three linear differently charged cationic polyions, such as alpha-polylysine, epsilon-polylysine, and polyethylvinylpyridinium bromide [PEVP], with two different substitution degrees. Our aim is to investigate the interaction mechanism between anionic-nonionic vesicles (hybrid niosomes) and linear polycations, characterizing the resulting aggregates in view of possible applications of these composite colloidal particles as vectors for multidrug delivery. In order to explore the aggregation behavior of the complexes and to gain information on the stability of the single niosomal vesicles within the aggregates, we employed dynamic light scattering (DLS), laser Doppler electrophoretic measurements, and fluorescence measurement techniques. The overall phenomenology is well described in terms of the re-entrant condensation and charge inversion behavior, observed in different colloidal systems. The aggregate size and overall charge depend on the charge ratio between vesicles and polyions, and the aggregates reach their maximum size at the point of charge inversion (re-entrant condensation). While the overall phenomenology is similar for all three polycations investigated, the stability and the integrity of the hybrid niosomal vesicles forming the aggregates strongly depend on the chemical structure of the polycations. The role of the polycations in the aggregation process is discussed by identifying specific interactions with the niosomal membrane, pointing out their importance for possible applications as drug delivery vectors.     

Mg-Al-NO_3层状双金属氢氧化物电性质研究

采用电泳法和电势滴定法测定出不同电解质（LiCl,NaCl和KCl）溶液中Mg-Al- NO_3层状双金属氢氧化物（Mg-Al-NO_3LDH）颗粒的ξ电位、等电点、永久电荷密 度以及零电荷点等电化学物理量，探讨了电解质、pH和样品化学组成对Mg-Al- NO_3LDH电性质的影响，研究发现一价阳离子Li~+,Na~+,K~+对Mg-Al-NO_3LDH颗粒 的等电点有影响，电荷点依次增大，而等电点依次降低。     

Effect of the ionic surfactant concentration on the stabilization/destabilization of polystyrene colloidal particles

One of the most interesting properties of the surfactants is that they are able to alter the stability of colloidal dispersions. Despite its great industrial relevance, only a few works analyze the colloidal stability of these systems at high surfactant concentrations (well above the critical micelle concentration (CMC)). In the present work, the colloidal stability of polystyrene particles is studied under a wide range of ionic surfactant concentrations. The effects of the surface charge of the latex particles (evaluating both sign and value), and surfactant type (cationic or anionic) have been examined. Colloidal stability data have been gathered by monitoring aggregation using a nephelometric technique. As will be shown, it is possible to reach different stability regimes using the same colloidal system just by changing the surfactant concentration. Independently of the sign of both the surfactant and the surface, the destabilization of the system consistently takes place above certain surfactant concentration due to a depletion effect from non-adsorbed micelles. This destabilization can be predicted by adding to the DLVO interaction energy a new contribution addressing the force between two spherical particles in the presence of non-adsorbing spherical macromolecules.