Improved determination of flavour compounds in butter by solid-phase (micro)extraction and comprehensive two-dimensional gas chromatography

The practicability and potential of comprehensive two-dimensional gas chromatography (GC x GC) coupled to both conventional flame ionisation (FID) and time-of-flight mass spectrometric (TOF-MS) detection, were compared with those of conventional one-dimensional (1D) GC, with the determination of flavour compounds in butter as an application. For polar flavour compounds, which were collected from the aqueous fraction of butter by means of solid-phase extraction (SPE), it was found that GC x GC dramatically improves the overall separation. Consequently, quantification and preliminary identification based on the use of ordered structures, can be performed more reliably. The improvement effected by replacing 1D-GC by GC x GC is considerable also in the case of TOF-MS detection, as illustrated by the high match factors generally obtained during identification. GC x GC was also used successfully for the characterisation of volatile flavour compounds in the headspace of butter collected by solid-phase microextraction (SPME) and to study the effect of heat treatment on the composition of butter samples in more detail.     

Comprehensive two-dimensional gas chromatography/mass spectrometric analysis of pepper volatiles

The headspace compositions of 13 pepper and peppercorn samples of different species, colloquially also referred to as pepper, were analyzed, and more than 300 compounds were tentatively characterized by means of comprehensive two-dimensional gas chromatography in tandem with flame ionization detection, quadrupole mass spectrometric detection and time-of-flight mass spectrometric detection (GC x GC-FID, GC x GC/qMS and GC x GC/TOFMS, respectively). The analysis of volatile organic compounds (VOCs) was performed after solid-phase microextraction (SPME) using a 75-microm PDMS/DVB fibre. Fingerprint comparison between the three techniques permitted peaks to be assigned in the GC x GC-FID experiment based on the analogous MS analysis, taking into account retention shifts arising from method variations. When using GC x GC/TOFMS, about five times more peaks were identified than in GC x GC/qMS. Retention indices for all peaks were calculated in the bi-dimensional column set comprising of a 5% phenyl polysilphenylene-siloxane primary column and a polyethylene glycol second column. The spectra obtained by both mass detection techniques (qMS and TOFMS) give very similar results when spectral library searching was performed. The majority of the identified compounds eluted as pure components as a result of high-resolution GC x GC separations, which significantly reduces co-elution, and therefore increases the likelihood that pure spectra can be obtained. The differences between TOFMS and qMS (in fast scanning mode) spectra were generally small. Whilst spectral quality and relative ion ratios across a narrow peak (e.g. w(b) approximately 100-150 ms) do vary more for the fast peaks obtained in GC x GC/qMS operation, than with TOFMS, in general adequate spectral matching with the library can be achieved.     

Simple calibration procedure for comprehensive two-dimensional gas chromatography

Mass transfer from the first-dimension to the second-dimension column in comprehensive two-dimensional gas chromatography (GC x GC) is normally quantitative, which means that the peak areas produced by GC x GC are equal to those obtained in one-dimensional gas chromatography (GC). In view of this relationship, it was investigated whether normal GC calibration could be used to quantify compounds analysed by GC x GC. Quantification of polycyclic aromatic hydrocarbons (PAHs) in sediment was used as a test case. It was concluded that more laborious and time-consuming GC x GC area calibration can be replaced by GC area calibration if separation quality and quantity prerequisites are met.     

Comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometric detection applied to the determination of pesticides in food extracts

The separation provided by conventional gas chromatography (1D-GC) can be significantly enhanced by using comprehensive two-dimensional GC (GC X GC) instead. Combination with mass spectrometric detection is desirable for unambiguous confirmation of target compounds and the provisional identification of unknowns. A GC X GC system using a cryogenic modulator was coupled to a time-of-flight mass spectrometric (TOF MS) detector. With the determination of pesticides in vegetable extracts as an example, it was demonstrated that GC X GC improves the separation dramatically. All 58 pesticides of interest could be identified using their full-scan mass spectra, which was not possible when using ID-GC-TOF MS. In addition, the high scan speed of the TOF MS allowed the deconvolution of compounds partly co-eluting in GC X GC.     

Identification of organic sulfur compounds in coal bitumen obtained by different extraction techniques using comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometric detection

The determination of organic sulfur compounds (OSC) in coal is of great interest. Technically and operationally these compounds are not easily removed and promote corrosion of equipment. Environmentally, the burning of sulfur compounds leads to the emission of SO _x gases, which are major contributors to acid rain. Health-wise, it is well known that these compounds have mutagenic and carcinogenic properties. Bitumen can be extracted from coal by different techniques, and use of gas chromatography coupled to mass spectrometric detection enables identification of compounds present in coal extracts. The OSC from three different bitumens were tentatively identified by use of three different extraction techniques: accelerated solvent extraction (ASE), ultrasonic extraction (UE), and supercritical-fluid extraction (SFE). Results obtained from one-dimensional gas chromatography (1D GC) coupled to quadrupole mass spectrometric detection (GC–qMS) and from two-dimensional gas chromatography with time-of-flight mass spectrometric detection (GC × GC–TOFMS) were compared. By use of 2D GC, a greater number of OSC were found in ASE bitumen than in SFE and UE bitumens. No OSC were identified with 1D GC–qMS, although some benzothiophenes and dibenzothiophenes were detected by use of EIM and SIM modes. GC × GC–TOFMS applied to investigation of OSC in bitumens resulted in analytical improvement, as more OSC classes and compounds were identified (thiols, sulfides, thiophenes, naphthothiophenes, benzothiophenes, and benzonaphthothiophenes). The roof-tile effect was observed for OSC and PAH in all bitumens. Several co-elutions among analytes and with matrix interferents were solved by use of GC×GC.     

Comprehensive two-dimensional gas chromatography with atomic emission detection and correlation with mass spectrometric detection: principles and application in petrochemical analysis

Comprehensive gas chromatography (GC x GC) has been combined with atomic emission detection (AED) to enable element-selective detection. Under optimised experimental conditions, the requirement of minimum five data points across a peak can be obtained even for analytes eluting early from the second-dimension column. Simple manipulation of the results allows the combined presentation of up to four sets of elemental data in one two-dimensional plot. GC x GC with AED and mass spectrometric (MS) detection in petrochemical analysis for fingerprinting as well as the identification of N- and S-containing unknowns is presented as an application.     

Analysis of BTEX, PAHs and metals in the oilfield produced water in the State of Sergipe, Brazil

During oil and gas exploitation, large amounts of produced water are generated. This water has to be analyzed with relation to the chemical composition to deduce the environmental impact of its discharge after a treatment process. Therefore, a study was carried out to evaluate preliminarily the BTEX (benzene, toluene, ethylbenzene and xylenes), polycyclic aromatic hydrocarbons (PAHs) and metals contents in produced water samples taken from effluents of the Bonsucesso treatment plant located in the city of Carmópolis, the most important oil and gas producer in the State of Sergipe, North-east of Brazil. Three methods were optimized to determine the target compounds. Polycyclic aromatic hydrocarbons were determined by gas chromatography with mass spectrometric detection (GC/MS), volatile aromatic hydrocarbons (BTEX) by gas chromatography with photoionization detector (GC/PID) and metals were analyzed by flame atomic absorption spectrometry (FAAS). The results showed that concentrations of the target compounds in these samples ranged from 96.7 to 1397 μg L^− 1 for BTEX, from 0.9 to 10.3 μg L^− 1 for PAHs and from 0.003 to 4540 mg L^− 1 for metals.     

Chemical characterization of aromatic compounds in extra heavy gas oil by comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry

Comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry (GC×GC-TOFMS) was used for the characterization of aromatic compounds present in extra heavy gas oil (EHGO) from Brazil. Individual identification of EHGO compounds was successfully achieved in addition to group-type separation on the chromatographic plane. Many aromatic hydrocarbons, especially polycyclic aromatic hydrocarbons and sulfur compounds, were detected and identified, such as chrysenes, phenanthrenes, perylenes, benzonaphthothiophenes and alkylbenzonaphthothiophenes. In addition, triaromatic steroids, methyl-triaromatic steroids, tetrahydrochrysenes and tetraromatic pentacyclic compounds were present in the EHGO aromatic fractions. Considering the roof-tile effect observed for many of these compound classes and the high number of individual compounds identified, GC×GC-TOFMS is an excellent technique to characterize the molecular composition of the aromatic fraction from EHGO samples. Moreover, data processing allowed the quantification of aromatic compounds, in class and individually, using external standards. EHGO data were obtained in μgg(-1), e.g., benzo[a]pyrene were in the range 351 to 1164μgg(-1). Thus, GC×GC-TOFMS was successfully applied in EHGO quantitative analysis.     

Identification of unknown compounds on the basis of retention index data in comprehensive two-dimensional gas chromatography

The identification of unknown compounds in complex samples is very difficult. Comprehensive two-dimensional gas chromatography (GC x GC) provides very good resolution and improved identification reliability. Mass spectrometry is a powerful identification tool and retention index data are another good approach to this end. In this study, a second-order polynomial was used to calculate retention index data based on n-alkanes beyond the region of the 'isovolatile' curve in GC x GC, and the results in the 2nd dimension were validated by using the same stationary phase column in one-dimensional GC. To test the usefulness of the method, volatile compounds in a tobacco leaf extract fraction were analyzed using GC x GC, and 60 compounds were identified on the basis of their retention indices.     

Application of comprehensive two-dimensional gas chromatography-time-of-flight mass spectrometry in the analysis of volatile oil of traditional Chinese medicines

This paper reports comprehensive two-dimensional gas chromatography-time-of-flight mass spectrometry (GC x GC-TOF MS) analysis of Pogostemon cablin Benth (Cablin Parchouli) volatile oil. The suitable column system and operation conditions were chosen on the basis of the properties of composition of the volatile oil. One-dimensional gas chromatography (ID-GC) and GC x GC, GC-MS and GC x GC-TOF MS were compared under appropriate conditions, and the enhanced sensitivity and superior resolution of GC x GC were demonstrated. 394 components were tentatively identified by GC x GC-TOF MS.     

Seasonal Variations of Polycyclic Aromatic Hydrocarbons in Air Particulate Extracts

Aroma-active volatile organic compounds (VOCs) present in brandies produced in the Slovak Republic have been identified by gas chromatography–olfactometry (GC–O) and GC–MS. GC–O data treatment was based on a concept of detection frequency. Direct injection of samples was used due to its simplicity and the fact that determined composition is that of the original samples. This is especially important for correlation of results obtained by sensory evaluation and gas chromatographic measurements. Among 200 organic compounds found by GC only 71 showed olfactive properties at the given concentration levels. In order to identify aroma-active substances, linear retention indices (LRI) have been calculated and compared with available LRI libraries. The most aroma-active compounds have been found in samples of Frucon brandy, while Vinovica showed their minimal content. The results obtained by gas chromatography have been compared with sensory evaluation of brandy odor.     

Profiling analysis of volatile compounds from fruits using comprehensive two-dimensional gas chromatography and image processing techniques

An image processing approach originating from the proteomics field has been transferred successfully to the processing of data obtained with comprehensive two-dimensional gas chromatographic separations data. The approach described here has proven to be a useful analytical tool for unbiased pattern comparison or profiling analyses, as demonstrated with the differentiation of volatile patterns (“aroma”) from fruits such as apples, pears, and quince fruit. These volatile patterns were generated by headspace solid phase microextraction coupled to comprehensive two-dimensional gas chromatography (HS-SPME-GC × GC). The data obtained from GC × GC chromatograms were used as contour plots which were then converted to gray-scale images and analyzed utilizing a workflow derived from 2D gel-based proteomics. Run-to-run variations between GC × GC chromatograms, respectively their contour plots, have been compensated by image warping. The GC × GC images were then merged into a fusion image yielding a defined and project-wide spot (peak) consensus pattern. Within detected spot boundaries of this consensus pattern, relative quantities of the volatiles from each GC × GC image have been calculated, resulting in more than 700 gap free volatile profiles over all samples. These profiles have been used for multivariate statistical analysis and allowed clustering of comparable sample origins and prediction of unknown samples. At present state of development, the advantage of using mass spectrometric detection can only be realized by data processing off-line from the identified software packages. However, such information provides a substantial basis for identification of statistically relevant compounds or for a targeted analysis.     

Analysis of aromatic compounds in gasoline with flow-switching comprehensive two-dimensional gas chromatography

A comprehensive two-dimensional gas chromatography (GC x GC) instrument has been created by coupling a flow-switching modulator and a standard gas chromatograph. The instrument was used to characterize the aromatic composition of gasoline. The high-resolution separation produced by flow-switching GC x GC allowed gasoline aromatics to be fully resolved from saturated components. The aromatic compounds were further separated into groups having the same carbon number. A standard gasoline sample was analyzed to evaluate the quantitative accuracy and precision of this technique. The data show that flow-switching GC x GC produces results that are comparable to gas chromatography-mass spectrometry (GC-MS) and thermal modulation GC x GC. The simple, low-cost, and robust nature of flow-switching GC x GC makes it an ideal technique for the routine analysis of aromatic compounds in gasoline.     

Recent developments in the application of comprehensive two-dimensional gas chromatography

The literature on comprehensive two-dimensional gas chromatography (GC x GC) is reviewed, with emphasis on application-oriented studies published in the period 2004-2006. The various strategies that can be used in such studies, the state-of-the-art analytical performance and the high potential of GC x GC combined with time-of-flight mass spectrometric detection are highlighted.     

全二维气相色谱-飞行时间质谱联用技术分析重馏分油中芳烃组成

通过对升温速度、二维补偿温度、调制周期等关键实验参数的优化,建立了全二维气相色谱-飞行时间质谱(GC×GC-TOF MS)分析重馏分油中芳烃组分的方法,得到了重馏分油芳烃组分按环数分布的二维点阵图。根据谱库检索、标准化合物对照及文献报道,对重馏分油芳烃组分中菲、甲基菲及芘、苯并蒽等常见多环芳烃(PAH)进行了准确定性,并将该方法应用到重馏分油加氢处理工艺研究中,对菲、芘的加氢处理产物进行了定性分析。该研究为重馏分油芳烃组分的准确定性提供了新的技术手段,为加深对油品加氢规律的认识提供了技术支持。全二维气相色谱与普通一维色谱对比,在重馏分油的芳烃组分分析上体现了极大优势。     

Attempt to unravel the composition of toxaphene by comprehensive two-dimensional gas chromatography with selective detection

Comprehensive two-dimensional gas chromatography (GC x GC) coupled with micro electron-capture and time-of-flight mass spectrometric (TOF-MS) detection has been used to analyse technical toxaphene. An HP-1 x HT-8 column combination yielded highly structured chromatograms and revealed a complex mixture of over 1000 compounds what is significantly higher number than in any study before. The analysis of a mixture of 23 individual congeners and TOF-MS evaluation of technical toxaphene showed that the chromatogram is structured according to the number of chlorine substituents in a molecule. The nature of the compounds (bornane and camphene) does not appear to have any influence. The sum of the peak areas of all congeners in each group was calculated using laboratory-written software; based on these results, the composition of technical toxaphene as a function of the number of chlorine substituents was provisionally calculated and was found that hepta- and octachlorinated compounds represents 75% of the total toxaphene area.     

Characterization of the volatile fraction emitted by Pinus spp. by one- and two-dimensional chromatographic techniques with mass spectrometric detection

The chemical composition of the needles of P. pinea, P. pinaster, P. halepensis, P. nigra, P. brutia, P. patula, P. radiata, P. taeda, P. elliotti, P. kesiya, P. sylvestris and P. eldarica was investigated. Headspace solid-phase microextraction and steam distillation extraction were used to collect the volatile fractions. Samples were analyzed using one-dimensional gas chromatography (1D-GC) and comprehensive two-dimensional gas chromatography (GC × GC) associated with a quadrupole and a time-of-flight mass detectors. Results showed that the analytical capabilities of 1D-GC are partially limited by the separation power of the columns. The higher sensibility and the absence of peak skewing of the time-of-flight mass analyzer, with the use of automated peak finding and deconvolution algorithms, allowed for the detection of trace components with qualitative full spectra and the extraction of true mass spectra from coeluting compounds, promoting their reliable identification and thus significantly improving results obtained by 1D-GC/MS, when using a quadrupole mass analyzer. The use of GC × GC resulted in enhanced separation efficiency and increased signal to noise ratio (sensitivity) of the analytes, maximizing mass spectra quality and improving compound detection and identification. This work shows the use of 1D-GC/ToFMS for the analysis of pine needles volatiles, achieving the detection of 177 compounds, that is more than twice the number previously identified by standard 1D-GC/MS. The analysis by GC × GC for the same sample allowed the detection of 212 compounds. The enantioselective GC × GC analysis performed for all the Pinus spp. under study achieved the detection of 422 different compounds. Cross-over phenomena according to operational conditions are highlighted and discussed.     

Investigation of sulphur compounds in coal tar using monodimensional and comprehensive two-dimensional gas chromatography

Coal is a non renewable fossil fuel, used mainly as a source of electrical energy and in the production of coke. It is subjected to thermal treatment, pyrolysis, which produces coke as a main product, in addition to a condensed liquid by-product, called tar. Tar is a complex mixture of organic compounds which contains different chemical classes, presenting aromatic and sulphur heterocyclic compounds. In general, identification of these compounds requires steps of isolation and fractionation, mainly due to co-elution of these compounds with polyaromatic hydrocarbons (PAH). The objective of this work is to characterize the sulphur compounds present in the coal tar obtained via pyrolysis, using comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry detector (GC×GC/TOFMS). Coal samples from the State of Paraná, Brazil were subjected to laboratorial scale pyrolysis. Several experimental conditions were tested, such as sample weight (5, 10 and 15g), heating ramp (10, 25 and 100°C/min) and final temperature (500, 700 and 900°C). Samples were analyzed by one dimensional gas chromatography (1D-GC) coupled to a quadrupole mass spectrometry detector (GC/qMS) and two-dimensional gas chromatography with time-of-flight mass spectrometry detector (GC×GC/TOFMS). The higher amount of sulphur compounds was obtained at a final temperature of 700°C and a heating ramp of 100°C/min. The main classes observed in the color plot were thiophenes, benzothiophenes and alkylated dibenzothiophenes. GC×GC/TOFMS allowed the identification of the greater number of compounds and the separation of several sulphur compounds from one another. Moreover, separation of sulphur compounds from polyaromatic hydrocarbons and phenols was achieved, which was not possible by 1D-GC. Comparing GC×GC/TOFMS and 1D-GC (SIM mode) also showed that 1D-GC, one of the most employed quantification tools for sulphur compounds, can be misleading for detection, identification and quantification, as the number of isomers of sulphur compounds found was greater than theoretically possible.     

Qualitative screening and quantitative determination of pesticides and contaminants in animal feed using comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry

A method has been developed for the target analysis of over 100 pesticides and contaminants in a complex feed matrix. The method is based on extraction with ethyl acetate, cleanup by gel permeation chromatography (GPC) and dispersive solid-phase extraction (SPE) with primary secondary amine phase (PSA), and analysis by comprehensive two-dimensional gas chromatography with full scan time-of-flight mass spectrometric detection (GC x GC-TOF-MS). Parameters studied during method development included a dispersive SPE cleanup step after GPC, large volume injection into the GC system and the GC x GC separation. Qualitative and quantitative performance of the GC x GC system was evaluated by analyzing spiked extracts in the range equivalent to 1-100 microg/kg in feed. At levels of 50 microg/kg and higher, all compounds targeted for could be identified fully automatically by the software based on their mass spectra. At lower levels the hit rate decreased with the concentration. System linearity was excellent in solvent and only slightly affected by matrix (correlation coefficients r>or=0.995 for 90% of the compounds). Limits of quantification were in the 1-20 microg/kg range for most compounds. The overall method was validated for 106 compounds at the 10 and 100 microg/kg level. Recoveries between 70% and 110% and RSDs below 20% were obtained for the majority of the compounds.     

Headspace solid-phase microextraction combined with GC×GC-TOFMS for the analysis of volatile compounds of Coptis species rhizomes

In this study, the investigation of the volatile compounds of dried rhizomes of Coptis chinensis Franch, C. deltoidea C. Y. Cheng et Hsiao, and C. teeta Wall was carried out to complete the chemical composition of these valuable natural products. Volatile profiles were established and compared after headspace solid-phase microextraction (HS-SPME) using a polydimethylsiloxane/divinylbenzene (PDMS/DVB, 65 μm) fibre coupled to comprehensive 2D gas chromatography time-of-flight mass spectrometry (GC×GC-TOFMS). Analyses were performed and compared on two column-phase combinations (non-polar/polar and polar/non-polar). The majority of the identified compounds eluted as well-separated (pure) components as a result of high-resolution capability of the GC×GC method, which significantly reduces co-elution. Therefore, this increases the likelihood that pure mass spectra can be obtained. More than 290 volatile and semi-volatile organic compounds were tentatively characterized by means of GC×GC in tandem with TOFMS detection. Improved result interpretations were obtained in terms of compound classification based on the organized structure of the peaks of structurally related compounds in the GC×GC contour plot. These compounds are distributed over the chemical groups of hydrocarbons, acids, alkenes, alkynes, aldehydes, ketones, alcohols, esters, furans, and terpenoids. Among all the chemical groups, terpenoids present the higher number of identified compounds (44), alkenes (41), and aldehydes and ketones (28). This study completed the volatile phytochemical analysis of the headspace composition of various Coptis species rhizomes, and should serve as a means to identify the difference between the rhizomes and may also be useful to confirm individual species based on their volatile chemical profile.