考虑分布轴向力的细长杆横向振动与失稳分析

为量化梁、杆、柱的自重(下称分布轴向力)对静力失稳和动力横向振动的影响,在《材料力学》和《机械系统动力学》教材的基础上,建立了分布轴向力下的杆柱失稳和横向振动的力学、数学模型.采用有限差分法、伽辽金法和数值积分法获取计算结果.结果表明:考虑分布轴向力的杆柱横向振动固有频率随杆长增加而减小,杆柱失稳时一阶固有频率为0;分...     

功能梯度碳纳米管增强复合材料板弯曲和模态的广义有限差分法

由复合材料构成的板结构一直以来受到很大关注,其中功能梯度碳纳米管增强复合材料(functionally graded carbon nanotube-reinforced composite,FG-CNTRC)具有异常优越的力学性能,使得诸多学者展开了对功能梯度碳纳米管增强复合材料板结构力学行为的研究.本文以FG-CN...     

轴向流固定床反应器流场计算研究——数学模型与计算方法

本文提出了轴向流固定床反应器的流动模型和基本方程。运用有限差分法计算了这种反应器内部的流场。     

广义有限差分法求解Kirchhoff和Winkler薄板弯曲问题

论文将广义有限差分法用于数值计算Kirchhoff板和Winkler板的弯曲问题.广义有限差分法是基于最小二乘原理的一种区域型无网格方法.相比于传统的网格类数值解法,广义有限差分法无需网格生成且无需数值积分.通过数值实验结果表明,广义有限差分法可以有效地求解两类薄板在不同横向荷载作用下的弯曲问题.     

轴向变速运动正交各向异性板的动态稳定性

研究面内载荷作用下轴向变速运动正交各向异性薄板的横向振动及其稳定性。利用Galerkin法与平均法,在激励频率为2倍固有频率或为两阶固有频率之和附近时得到自治的常微分方程组;在参数激励频率和激励振幅平面上,分析由共振引发的失稳区域。数值算例验证了面内载荷、轴向速度、加速度参数对失稳区域的影响。     

在径向载荷和轴向冲击联合作用下的圆柱壳塑性稳定性分析

对有径向载荷的圆柱壳，受轴向冲击时塑性失稳的临界速度进行理论分析。分析结果与实验值相吻合，并给出一般的规律，它也适用于无径向载荷的情况。     

分布轴向力作用下隔水管横向自由振动分析

隔水管固有频率的精确计算对保证隔水管的安全使用和防止共振的发生有着极为重要的意义.在分析中,考虑了分布轴向力和顶张力的共同作用,建立了隔水管横向振动力学模型;基于牛顿定律和纵横弯曲梁理论,对微单元受力分析,得到隔水管横向自由振动的四阶偏微分方程;利用分离变量法将四阶偏微分方程简化为四阶变系数常微分方程;采用积分法求解四阶变系数常微分方程,得到隔水管横向自由振动固有频率的解析解.结果表明:(1)分布轴向力作用下隔水管横向自由振动的固有频率和振型,与将分布轴向力简化为集中力作用下隔水管的固有频率和振型有很大差别;(2)顶张力一定时,随着分布轴向力减小,隔水管固有频率增大;分布轴向力一定时,随着顶张力增大,隔水管固有频率增大;(3)采用积分法求解隔水管横向振动特性时,计算精度高,为隔水管的优化设计提供了可靠的理论依据.     

联合载荷作用下简支矩形板的屈曲和过屈曲

本文研究了简支正交各向异性矩形板在两对板受中面压力作用下的屈曲和过屈曲性态,得到了载荷的稳定性区域,证明了临界载荷最多为二重的。利用多参数摄动方法求得临界载荷附近板的过屈曲状态的渐近解,分析了在二重临界载荷附近,当载荷按比例变化时,板的可能的过屈曲状态及其与参数的依赖关系。     

面内压缩载荷和横向载荷共同作用下薄板的后屈曲性能分析

本文研究在面内压缩载荷和横向载荷同时作用下的薄板后屈曲问题。应用能量原理建立受面内压缩载荷和横向载荷共同作用时板的大挠度能量泛函,直接用最优化方法求上述能量泛函的极小值,从而得到了薄板的后屈曲平衡路径。所得结果同前人的解析解一致。文中分三种情况讨论了横向载荷对受压薄板的后屈曲性能的影响。     

Linear stability analysis of coupled parallel flexible plates in an axial flow

We study here the linear stability of N identical flexible plates with clamped–free boundary conditions forced by a uniform parallel flow. Flow viscosity and elastic damping are neglected, and the flow around the plates is assumed potential. The shedding of vorticity from the plates’ trailing edges is accounted for by introducing a force-free wake behind each plate. A Galerkin method is used to compute the eigenmodes of the system. We are interested in the effects of the number of plates and their relative distance on the stability property of the state of rest, as well as in the nature and structure of the coupled states. Detailed results are presented for the cases N=2, N=3 and N1.     

Buckling and post-buckling of piezoelectric plates using finite element method

The finite element equations considering the geometrical nonlinearity of piezoelectric smart structures are derived based on the total Lagrange method under the assumption of weak coupling between electricity and mechanics. Buckling and post-buckling of piezoelectric-plate with various boundary conditions are investigated. The calculated results show that piezoelectric effects and external voltage can hardly affect the buckling and post-buckling characteristics of piezoelectric-plate under uniaxial pressure while the buckling caused by displacement in-plane has much to do with the electric field. The present work is supported by the National Natural Science Foundation of China (No. 59635140).     

Mixed finite element and differential quadrature method for free and forced vibration and buckling analysis of rectangular plates

This paper presents a combined application of the finite element method (FEM) and the differential quadrature method (DQM) to vibration and buckling problems of rectangular plates. The proposed scheme combines the geometry flexibility of the FEM and the high accuracy and efficiency of the DQM. The accuracy of the present method is demonstrated by comparing the obtained results with those available in the literature. It is shown that highly accurate results can be obtained by using a small number of finite elements and DQM sample points. The proposed method is suitable for the problems considered due to its simplicity and potential for further development.     

Computational study of the axial instability of rimming flow using Arnoldi method

Axial instability of rimming flow has been investigated by solving a linear generalized eigenvalue problem that governs the evolution of perturbations of two‐dimensional base flow. Using the Galerkin finite element method, full Navier–Stokes equations were solved to calculate base flow and this base flow was perturbed with three‐dimensional disturbances. The generalized eigenproblem formulated from these equations was solved by the implicitly restarted Arnoldi method using shift‐invert technique. This study presents instability curves to identify the critical wavelength of the neutral mode and the critical β, which measures the importance of gravity relative to viscosity. The axial instability of rimming flow is examined and three‐dimensional flow was reconstructed by using eigenvector and growth rate at a critical wave number. The critical β value in the axial instability analysis was observed to be comparable to the onset β value of the transition between the bump and the homogeneous film state in 2‐D base flow calculations. Copyright © 2006 John Wiley & Sons, Ltd.     

Buckling analysis of an elastic bar using the Bubnov-Galerkin method

The factors responsible for the errors often encountered in the stability analysis of elastic systems are found by testing the Bubnov-Galerkin method for the buckling problem of a single-layer flexible elastic bar. Refined formulas are obtained for the maximum deflection of a longitudinally compressed hinged three-layer bar. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 49, No. 1, pp. 148–156, January–February, 2008.     

基于等几何有限元法的功能梯度微板热力耦合屈曲预测

基于修正偶应力理论和Kirchhoff板理论,建立了功能梯度微板热力耦合屈曲等几何有限元模型。该模型仅包含一个材料尺度参数,能够描述尺度效应现象,且满足修正偶应力理论的高阶连续性要求。基于虚功原理推导了功能梯度微板热力耦合屈曲等几何有限元方程。通过对板的典型算例分析,讨论了材料尺度参数、边长比及梯度指数对板稳定性的影响。结果表明,本文模型预测的屈曲载荷总是大于宏观理论的结果,即捕捉到了尺度效应现象;随着临界屈曲力的增加,临界屈曲热载荷线性减少;此外,边长比和梯度指数也对微板的稳定性产生一定影响。     

求解不连续中厚板自由振动的微分容积单元法

基于区域叠加原理和微分容积法,发展了一种新型的数值方法——微分容积单元法,用以分析具有不连续几何特征的中厚板的自由振动。根据板的不连续情况将其划分为若干单元,在每个单元内用微分容积法将控制微分方程离散成为一组线性代数方程．在相邻的单元连接处应用位移连续条件和平衡条件,引入边界约束条件后得到一套关于各配点位移的齐次线性代数方程,由此可导出求解系统固有频率的特征方程。本文用子空间迭代法求解特征方程,并以开孔板、混合边界条件板和突变厚度板为例研究了方法的收敛性和计算精度。     

Variational principles of perforated thin plates and finite element method for buckling and post-buckling analysis

On the basis of the general theory of perforated thin plates under large deflections^{[1, 2]}, variational principles with deflectionw and stress functionF as variables are stated in detail. Based on these principles, finite element method is established for analysing the buckling and post-buckling of perforated thin plates. It is found that the property of element is very complicated, owing to the multiple connexity of the region. Project supported by National Natural Science Foundation of China.     

Differential quadrature method for bending of orthotropic plates with finite deformation and transverse shear effects

Based on the Reddy ‘s theory of plates with the effect of higher-order shear deformations, the governing equations for bending of orthotropic plates with finite deformations were established. The differential quadrature ( DQ ) method of nonlinear analysis to the problem was presented. New DQ approach, presented by Wang and Bert ( DQWB), is extended to handle the multiple boundary conditions of plates. The techniques were also further extended to simplify nonlinear computations. The numerical convergence and comparison of solutions were studied. The results show that the DQ method presented is very reliable and valid. Moreover, the influences of geometric and material parameters as well as the transverse shear deformations on nonlinear bending were investigated. Numerical results show the influence of the shear deformation on the static bending of orthotropic moderately thick plate is significant.     

Analysis of dynamical buckling and post buckling for beams by finite segment method

IntroductionThe stability or dynamical buckling of structures is the parametrically exacted vibration ofstructures,and itis a nonlinear vibration problem[1].Dynamical stabilityof beams was studiedusing Galerkin variation method by Russian scholar,and B.B.…