Enhanced luminol electrochemiluminescence triggered by an electrode functionalized with dendrimers modified with titanate nanotubes

We have constructed a novel electrochemiluminescence (ECL) platform by functionalizing a poly(amidoamine) dendrimer (PAAD) with titanate nanotubes (TiNTs). The PAAD has an open spherical structure that possesses a high density of active groups and thus favors mass transport, while the TiNTs possess excellent electronic conductivity and thus can promote electron transfer on the surface of a glassy carbon electrode (GCE). A study on the intensity and stability of the ECL of luminol on the modified GCE revealed a substantial improvement compared to that of a bare GCE. The effects of the concentration of TiNTs, the pH value of the solution, and of electrochemical parameters on the intensity of the ECL of luminol were studied and resulted in a sensitive ECL sensor for hydrogen peroxide (H₂O₂) that works in the concentration range of 1 nM to 0.9 μM. The scavenging effect of superoxide dismutase (SOD) on the H2O2 electrode ECL was then exploited to design a biosensor for the determination of SOD in concentrations between 50 and 500 nM.

New synthesis of gold nanocorals using a diazonium compound,and their application to an electrochemiluminescent assay of hydrogen peroxide

The reaction of hydrogen tetracholoroaurate, sodium borohydride and the diazonium compound prepared from 4-aminobenzoic acid results in the formation of gold nanocorals (Au-NCs) for the first time. Scanning electron microscopy images and transmission electron microscopy images show that the Au-NCs are composed of nanowires with a diameter of 5.3 nm. A glassy carbon electrode modified with Au-NCs is found to trigger intense electrochemiluminescence of the luminol/H₂O₂ system at a potential of ?0.13 V. The effect was exploited to determine H₂O₂ in the 0.1 to 100 μM concentration range with a 30 nM detection limit.

Electrochemiluminescent sensing of dopamine using CdTe quantum dots capped with thioglycolic acid and supported with carbon nanotubes

We have synthesized water-dispersible CdTe quantum dots (QDs) capped with thioglycolic acid. Their quantum yield is higher than 54%. A sensitive electrochemiluminescence (ECL) method was established based on the modification of the composite of the QDs, carbon nanotubes and chitosan on indium tin oxide glass. The sensor displays efficient and stable anodic ECL which is quenched by dopamine. A respective sensor was designed that responds to dopamine linearly in the range of 50?pM to 10?nM, and the detection limit is 24?pM. Dopamine was determined with this sensor in spiked cerebro-spinal fluid with average recoveries of 95.7%.

Highly porous magnetite/graphene nanocomposites for a solid-state electrochemiluminescence sensor on paper-based chips

Graphene-nanosheet-based highly porous magnetite nanocomposites (GN-HPMNs) have been prepared using a simple solvothermal method and used as an immobilization matrix for the fabrication of a solid-state electrochemiluminescence (ECL) sensor on paper-based chips. Highly porous Fe₃O₄ nanocrystal clusters were coated with acrylate and wrapped tightly on the skeleton of graphene nanosheets. The structures and sizes of the GN-HPMNs could be tuned by varying the proportions of the solvents ethylene glycol and diethylene glycol. Then, the relatively highly porous ones with an average diameter of about 65 nm were combined with Nafion to form composite films on an electrode surface for immobilization of Ru(bpy)₃ ²⁺ (bpy is 2,2′-bipyridine). Because of their porosity, negatively charged surface, and cooperative characteristics of magnetic nanomaterials and graphene, under an external magnetic field, the GN-HPMNs ensured effective immobilization, excellent electron transfer, and long-term stability of Ru(bpy)₃ ²⁺ in the composite film. The sensor developed exhibited excellent reproducibility with a relative standard deviation of 0.65 % for 30 continuous cycles. It was found to be much more favorable for detecting compounds containing tertiary amino groups and DNAs with guanine and adenine. A detection limit (signal-to-noise ratio of 3) of 5.0 nM was obtained for tripropylamine. As an application example, 0.5 nM single-nucleotide mismatch could be detected. This was the first attempt to introduce magnetic nanomaterials and an external magnetic field into paper-based chips. The sensor developed has the advantages of high sensitivity, good stability, and wide potential applicability as well as simplicity, low cost, and good disposability.

Ultrasensitive electrochemiluminescent detection of pentachlorophenol using a multiple amplification strategy based on a hybrid material made from quantum dots,graphene, and carbon nanotubes

We report on a highly sensitive and selective electrochemiluminescence (ECL) based method for the determination of pentachlorophenol (PCP). It is based on a new hybrid material composed of CdS quantum dots (QDs), graphene, and carbon nanotubes (CNTs), and uses peroxodisulfate as the coreactant. The use of this system results in a nearly 18-fold increase in ECL intensity. On interaction between PCP and the QDs, a decrease in ECL intensity is observed at PCP in a concentration as low as 1.0 pM and over a wide linear range (from 1.0 pM to 1.0 nM). The method is hardly affected by other chlorophenols and nitrophenols, and the electrode can be recycled.

Highly sensitive hybridization assay using the electrochemiluminescence of an ITO electrode, CdTe quantum dots functionalized with hierarchical nanoporous PtFe nanoparticles, and magnetic graphene nanosheets

We report on a disposable microdevice suitable for sandwich-type electrochemiluminescence (ECL) detection of DNA. The method is making use of CdTe quantum dots functionalized with hierarchical nanoporous PtFe (CdTe@PtFe) nanoparticles and with magnetic graphene nanosheets. The latter were selected as carriers for the capture DNA due to their excellent biomagnetic separation capability and electrical properties. The CdTe@PtFe nanoparticles were used to label the signal DNA which resulted in distinctly enhanced ECL owing to the large specific surface area and good electrical conductivity of the PtFe alloy. A DNA sensor was constructed on a disk-shaped indium tin oxide electrode that was fabricated via etching. Under optimal conditions, the biosensor responds linearly to DNA in the 0.02 fM to 5000 fM concentration range, with a detection limit as low as 15 aM. The electrode is regenerable. The method displays excellent specificity, extremely good sensitivity, and is highly reproducible.

Electrodeposition of CdSe quantum dots and its application to an electrochemiluminescence immunoassay for α-fetoprotein

We report on the first label-free electrochemiluminescence (ECL) immunosensor for α-fetoprotein (AFP). It is based on the use of CdSe quantum dots that were electrodeposited directly on a gold electrode from an electrolyte (containing cadmium sulfate, EDTA and selenium dioxide) by cycling the potential between 0 and -1.2?V (vs. SCE) for 60?s. The electrodeposited dots were characterized by scanning electron microscopy and energy dispersive spectroscopy. Under optimal conditions, the specific immunoreaction between AFP and anti-AFP resulted in a decrease of the ECL signal because of the steric hindrance and the transfer inhibition by peroxodisulfate. The quenching effect of the immunoreaction on the intensity of the ECL was used to establish a calibration plot which is linear in the range from 0.05 to 200?ng?mL^?1. The detection limit is 2?pg?mL^?1. The assay is highly sensitive and satisfactorily reproducible. In our opinion it opens new avenues to apply ECL in label-free biological assays.

Cathodic electrochemiluminescence and reversible electrochemistry of [Ru(bpy)3]2+/1+ in aqueous solutions on tricresyl phosphate-based carbon paste electrode with extremely high hydrogen evolution potential

Many cathodic electrochemiluminescence (ECL) systems require very negative potentials; it is difficult to achieve stable cathodic ECL in aqueous solutions because of hydrogen evolution and instability of intermediates. In this study, tricresyl phosphate-based carbon paste electrode (CPE) was used to achieve cathodic ECL. It exhibits no obvious hydrogen evolution even at a potential up to ?1.6 V and dramatically stabilizes electrogenerated [Ru(bpy)₃]⁺. Therefore, a reversible wave of [Ru(bpy)₃]^2+/1+ in aqueous solutions at carbon electrode has been observed for the first time, and cathodic ECL of [Ru(bpy)₃]²⁺/S₂O ₈ ^2? has been achieved. Under the optimum conditions, the plots of the ECL versus the concentration of S₂O ₈ ^2? are linear in the range of 10^?6 to 10^?2 M with the detection limit of 3.98?×?10^?7 M. Common anions have no effect on the ECL intensity of the [Ru(bpy)₃]²⁺/S₂O ₈ ^2? system. Since CPEs have been widely used, CPEs with high hydrogen evolution potential are versatile platforms for electrochemical study and cathodic ECL study.     

A lanthanide nanoparticle-based luminescent probe for folic acid

We report on a novel luminescent method for the detection of folic acid (FA), a member of the vitamin B family. Y₂O₃ nanoparticles were doped with europium(III) ions and surface-modified with captopril. Their fluorescence is quenched by FA, and intensity is a function of folic acid concentration in the 0.1 – 40 μM concentration range. The detection limit is 83 nM of FA at pH 7 and room temperature.

Electrochemical detection of in situ DNA damage induced by enzyme-catalyzed Fenton reaction. Part II in hydrophobic room temperature ionic liquid

A hydrophobic room temperature ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF₆]), was applied as nonaqueous solvent for the generation of hydroxy radical (?OH) through glucose oxidase-catalyzed Fenton reaction. The enzyme catalyzes the oxidation of glucose, and the produced H₂O₂ further reacts with transition metal ions, generating hydroxyl radicals. They attacked DNA and led its damage. This was detected by square wave voltammetry (SWV) of the electroactive indicator Co(bpy) ₃ ³⁺ . It bound more strongly to intact DNA, and the SWV peak currents decreased at the potential of 0.064?V when DNA was damaged. The experimental results testified that the antioxidants, ascorbic acid, aloe-emodin and rutin, inhibited oxidative DNA damage by hydroxyl radicals. The method is promising for rapid, sensitive, and inexpensive detection of DNA damage.

Electrochemiluminescence at nitrogen doped diamond-like carbon film electrodes

In the given paper the results of investigation of nitrogen doped diamond-like carbon films (DLF) for the fabrication of electrodes of electrochemical and electrochemiluminescent (ECL) cells are presented. The surface nanomorphology of modified electrodes was studied using the atomic-force microscopy method. The mechanisms of ECL reactions with Ru(bpy) ₃ ¹⁺ /Ru(bpy) ₃ ³⁺ (recombination Ru(bpy) ₃ ³⁺ /OH^? (ECL without co-reactant) and Ru(bpy) ₃ ³⁺ /tripropylamine (ECL with co-reactant) were studied on DLF modified electrodes in the aqueous solution. The work shows advantages of DLF as an electrode material for further analytical applications.     

Electrochemiluminescence of Tris(2,2′‐bipyridine)ruthenium with Various Co‐reactants under Ultrasound Irradiation

Electrochemiluminescence (ECL) of tris(2,2′‐bipyridine)ruthenium, Ru(bpy)₃²⁺ in the presence of various co‐reactants, such as tripropylamine (TPA), oxalate ion (C₂O₄^2?), ascorbic acid (H₂A) and dehydroascorbic acid (DHA), were investigated under ultrasound irradiation. In sono‐ECL experiments, an indium‐thin‐oxide (ITO) was used as working electrode, and a titanium tipped sonic horn probe (diameter 2 mm) which operated at a frequency of 20 kHz was set in the front of the ITO electrode. Under the ultrasound irradiation, ECL signals were found to be significantly enhanced when TPA and C₂O₄^2? were used as co‐reactants, only slightly enhanced in Ru(bpy)₃²⁺/DHA system, but total quenched in Ru(bpy)₃²⁺/H₂A system. The difference of Ru(bpy)₃²⁺ ECL behaviors for various co‐reactant could to be due to the different kinetics of catalytic reactions associated in ECL schemes. ECL quenching effect observed in Ru(bpy)₃²⁺/H₂A system was suggested to be due to electron transfer (ET) route between the excited state *Ru(bpy)₃²⁺ and ascorbate anion HA^? diffused from the bulk solution, where the diffusional HA^? species served as electron donor. The effect becomes more pronounced upon sonication because the effective collision frequency between *Ru(bpy)₃²⁺ and HA^? would be significantly increased by the enhanced mass transport effect of ultrasound.     

Four transition metal complexes constructed with mixed mercaptotetrazole and 4,4′-bipyridine ligands

Based on 5-mercapto-1H-tetrazole-1-methanesulfonic acid disodium salt (Na₂mtms) and 4,4′-bipyridine (bpy) as ligands, four new transition metal complexes, namely {[Cd₂(mtms)(bpy)₂(OAc)₂]·H₂O} _n (1), {[Cd(mtms)(bpy)₂(H₂O)₂]₂·bpy·4H₂O} _n (2), {[Zn₂(μ ₂-OH)(mtms)(bpy)₃(H₂O)]·ClO₄·H₂O} _n (3), and {[Co(mtms)₂(bpy)(H₂O)₂]·[Co(bpy)₂(H₂O)₄]·H₂O} _n (4), have been synthesized and characterized by single-crystal X-ray diffraction. Complex 1 features a pillared-layer coordination architecture linked by acetate, mtms, and bridging bpy ligands. Complex 2 has a 1D polymeric structure with [Cd(mtms)(bpy)₂(H₂O)₂] as the repeating unit; these infinite chains are further connected into a 3D supramolecular framework through π–π stacking of bpy ligands. In complex 3, the mtms ligand combined with μ ₂-OH bridges two Zn atoms to form a dimer structure, which is different from that of complex 2. Complex 4 shows a 3D supramolecular network containing infinite [Co(mtms)₂(bpy)(H₂O)₂]^2? anionic chains and free [Co(bpy)₂(H₂O)₄]²⁺ cationic components. The luminescence properties of 1 and 2 and the electrochemical properties of 3 are reported.     

An electrochemiluminescence aptasensor switch for aldicarb recognition via ruthenium complex-modified dendrimers on multiwalled carbon nanotubes

The authors describe an electrochemiluminescence (ECL) based aptasensor for the pesticide aldicarb. The method is based on effective ECL energy transfer that occurs between the ruthenium(II) bipyridyl complex [referred to as Ru(bpy)₃ ²⁺] and gold nanoparticles (AuNPs). More specifically, multiwalled carbon nanotubes were modified with dendritic poly(L-arginine) labeled with Ru(bpy)₃ ²⁺, and the aptamers were taggedd with AuNPs. In the absence of aldicarb, the ECL emitted by Ru(bpy)₃ ²⁺ is enhanced by AuNPs under peak wavelength at at a wavelength of 610 nm. In the presence of aldicarb, the capture and competitive binding of aldicarb to the DNA aptamers causes their separation from the DPA6/Ru(bpy)₃ ²⁺/MWCNT. As a result, ECL intensity decreases linearly with increasing aldicarb concentrations in the range between 40 pM and 4 nM, with a detection limit of 9.6 pM. This aptamer switch is highly sensitive, selective and inexpensive. Conceivably, it can be adapted to formats for the determination of other pesticide residues by using different DNA aptamers.

Open image in new window

Graphical abstract Schematic of the procedure for aptamer-based detection of aldicarb using the ECL signal of the Ru(bpy)₃ ²⁺ amplified by gold nanoparticles. This assay has high sensitivity, good selectivity, and low cost. It can presumably be transferred to other pesticide detection schemes.

     

Preparation of graphene platelet-Ru(phen) 3 2+ assemblies and their application in electrochemiluminescence detection

Graphene platelet (GP)-Ru(phen) ₃ ²⁺ assembles have been prepared through self-assembly of poly sodium styrenesulfonate (PSS) functionalized GPs and Ru(phen) ₃ ²⁺ driven by electrostatic attraction interactions in aqueous solution. The resultant assembled GP-Ru(phen) ₃ ²⁺ hybrid structure modified electrode exhibits excellent electrochemiluminescence (ECL) behaviors because of the ECL active species Ru(phen) ₃ ²⁺ contained therein.     

Quantum dots on electrodes—new tools for bioelectroanalysis

The review covers recent developments in which quantum dots (QDs) are combined with electrodes for detection of analytes. Special focus will be on the generation of photocurrents and the possibility of spatially resolved, light-directed analysis. Different modes for combining biochemical reactions with QDs will be discussed. Other applications involve the use of QDs as labels in binding analysis. Different methods have been developed for read-out. In addition to photocurrent analysis, voltammetric detection of metals and electrochemiluminescence (ECL) can be used. In the latter, light is the sensor signal. ECL-based systems combine the advantage of very sensitive analytical detection with rather simple instrumentation.

Electrochemical sensing of hydrogen peroxide using metal nanoparticles: a review

We are reviewing the state of electrochemical sensing of H₂O₂ based on the use of metal nanoparticles. The article is divided into subsections on sensors based on nanoparticles made from Ag, Pt, Pd, Cu, bimetallic nanoparticles and other metals. Some sensors display high sensitivity, fast response, and good stability. The review is subdivided into sections on sensors based on heme proteins and on nonenzymatic sensors. We also discussed the challenges of nanoscaled sensors and their future aspects.

Synthesis of multi-branched gold nanoparticles by reduction of tetrachloroauric acid with Tris base, and their application to SERS and cellular imaging

A biosensor for hydrogen peroxide was constructed by immobilizing horseradish peroxidase on chitosan-wrapped NiFe₂O₄ nanoparticles on a glassy carbon electrode (GCE). The electron mediator carboxyferrocene was also immobilized on the surface of the GCE. UV?Cvis spectra, Fourier transform IR spectra, scanning electron microscopy, and electrochemical impedance spectra were acquired to characterize the biosensor. The experimental conditions were studied and optimized. The biosensor responds linearly to H₂O₂ in the range from 1.0?×?10^?5 to 2.0?×?10^?3?M and with a detection limit of 2.0?×?10^?6?M (at S/N?=?3).

Novel oxovanadium(iv) heterochelate complexes: synthesis, structure, ESR spectra, and photoluminescence properties

The reactions of oxovanadium(iv) salts with dimethylmalonate anions (H₂Dmm — C₃H₆(COOH)₂) and chelating N-donor ligands (2,2′:6′,2″-terpyridine (terpy), 2,2′-bipyridine (bpy)) led to the formation of new mononuclear heterochelate complexes [VO(Dmm)(terpy)]·4H₂O (1) and [VO(Dmm)(bpy)(H₂O)] (2). The structures of the synthesized compounds were determined by X-ray diffraction. The ESR spectra of the compounds at 293 and 100 K were analyzed and simulated. The photoluminescence properties were investigated.     

Label-free and ultrasensitive electrochemiluminescence detection of microRNA based on long-range self-assembled DNA nanostructures

Electrochemiluminescence (ECL) integrates the advantages of electrochemical detection and chemiluminescent techniques. The method has received particular attention because it is highly sensitive and selective, has a wide linear range but low reagent costs. The use of nanomaterials with their unique physical and chemical properties has led to new kinds of biosensors that exhibit high sensitivity and stability. Compared to other nanomaterials, DNA nanostructures are more biocompatible, more hydrophilic, and thus less prone to nonspecific adsorption onto the electrode surface. We describe here a label-free and ultrasensitive ECL biosensor for detecting a cancer-associated microRNA at a femtomolar level. We have designed two auxiliary probes that cause the formation of a long-range self-assembly in the form of a μm-long 1-dimensional DNA concatamer. These can be used as carriers for signal amplification. The intercalation of the ECL probe Ru(phen)₃ ²⁺ into the grooves of the concatamers leads to a substantial increase in ECL intensity. This amplified sensor shows high selectivity for discriminating complementary target and other mismatched RNAs. The biosensor enables the quantification of the expression of microRNA-21 in MCF-7 cells. It also displays very low limits of detection and provides an alternative approach for the detection of RNA or DNA detection in diagnostics and gene analysis.