Extraction of microamounts of europium and americium into nitrobenzene by using hydrogen dicarbollylcobaltate in the presence of N,N′-dibutyl-N,N′-dimethyl-2-(2-dodecyloxyethyl)-malonamide

Extraction of microamounts of europium and americium by a nitrobenzene solution of hydrogen dicarbollylcobaltate (H⁺B⁻¹) in the presence of N,N′-dibutyl-N,N′-dimethyl-2-(2-dodecyloxyethyl)-malonamide (DBDMDDOEMA, L) has been investigated. The equilibrium data have been explained assuming that the cations HL₂⁺, ML₂³⁺ and ML₃³⁺ (M³⁺ = Eu³⁺, Am³⁺) are extracted into the organic phase. The values of extraction and stability constants of the species in nitrobenzene saturated with water have been determined. It has been found that the stability constants of the corresponding complexes EuL _n ³⁺ and AmL _n ³⁺, where n = 2,3 and L is DBDMDDOEMA, in water saturated nitrobenzene are comparable.     

Extraction behavior of uranium(VI), plutonium(IV), zirconium(IV), ruthenium(III) and europium(III) with γ-pre-irradiated solutions of N,N′-methylbutyl substituted amides in n-dodecane

The extraction of plutonium(IV), uranium(VI), zirconium(IV), europium(III) and ruthenium(III) with -pre-irradiated n-dodecane solutions of methylbutyl substituted hexanamide (MBHA), octanamide (MBOA) and decanamide (MBDA) from 3.5M HNO₃ has been studied as a function of absorbed dose up to 184×10⁴ Gray. The distribution ratios (K_d) of uranium(VI) decreased gradually up to a dose of 50×10⁴ Gray and became almost constant thereafter, while ruthenium(III) and europium(III) were not extracted in the entire dose range studied. The K_d values of Pu(IV) decreased gradually up to 10×10⁴ Gray, for MBOA, and 30×10⁴ Gray for MBHA and MBDA and then increased up to a dose of 72×10⁴ Gray, indicating the synergistic effect of radiolytic products at higher doses. The extraction of zirconium(IV) was found to increase gradually up to 72×10⁴ Gray. However, the steep fall in K_d values of plutonium(IV), zirconium(IV) beyond a dose of 72×10⁴ Gray was atrributed to third phase formation. The radiolytic degradation of amides was monitored by quantitative IR spectroscopy and was found to follow the order MBOA>MBDA>MBHA at 184×10⁴ Gray having the amines and carboxylic acids as the main radiolytic products.     

Extraction and separation performance of rhenium(VII) and uranium(VI) from nitric acid medium using N,N′-dimethyl-N,N′-dioctyldiglycolamide

Journal of Radioanalytical and Nuclear Chemistry - The extraction behavior and separation performance of Re(VII) and U(VI) from the nitric acid medium were studied respectively, in which an...     

Extraction of Uranium(VI) with N,N′-Dilauroylpiperazine in Carbon Tetrachloride

A novel extractant, N,N-dilauroylpiperazine (DLPEZ), was synthesized for the first time. The extraction of uranium(VI) with the novel extractant in carbon tetrachloride from aqueous nitric acid media has been studied. The dependence of extraction distribution ratio on the concentration of aqueous nitric acid, extractant, salting-out agent and temperature was investigated and the enthalpy of the extraction was determined.     

N,N,N′,N′-tetrabutylsuccinylamide as a new extractant in n-dodecane for extraction of uranium(VI) and thorium(IV) ions

N,N,N,N-tetrabutylsuccinylamide (TBSA) was synthesized, characterised and used for the extraction of U(VI) and Th(IV) from nitric acid solutions into n-dodecane. Extraction distribution coefficients of U(VI) and Th(IV) as a function of aqueous nitric acid concentration, extractant concentration and temperature have been measured and found that n-dodecane as diluent was superior to 50% 1,2,4-trimethyl benzene (TMB) and 50% kerosene, (OK) system for extraction of U(VI) and Th(IV). The compositions of extracted species, equilibrium constants and enthalpies of extraction reactions have also been calculated. The formation of the 121 complex of uranyl(II) ion or the 141 complex of thorium(IV) ion, nitrate ion and TBSA and extracted species was further confirmed by the IR spectra of saturated extract of U(IV) and Th(IV).     

Extraction of trivalent europium and americium by the synergistic mixture of bis-1,2-dicarbollylcobaltate and N,N,N′,N′-tetraoctyl diglycolamide in highly polar 3-nitro-α,α,α-trifluorotoluene solvent

Journal of Radioanalytical and Nuclear Chemistry - The extraction of trivalent europium and americium in the system water—HNO3—3-nitro-α,α,α-trifluorotoluene...     

Extraction behavior of strontium from nitric acid solution with N,N,N′,N′-Tetraisobutyl diglycolamide

The extraction behaviors of strontium from nitric acid solution were investigated with N,N,N′,N′-tetraisobutyl diglycolamide (TiBDGA). Effects of acidity, diluents, concentration of extractant and temperature on the distribution ratio of strontium (D _Sr) were examined. The stoichiometry of the extracted molecule was Sr²⁺:TiBDGA of 1:3. The apparent extraction equilibrium concentration constant logK _ex was 3.25. The enthalpy change ΔH and entropy change ΔS were ?55.6 kJ mol^-1 and ?124 J mol^-1 K^-1, respectively. The extraction is an exothermic process. Through two strip stages, strontium could be stripped effectively by 0.01 M nitric acid solution.     

Study on the extraction of trivalent lanthanide ions with N,N′-dimethyl-N,N′-diphenyl-malonamide and diglycolamide

The extraction of trivalent lanthanide (Ln(III) ions with two diamides: (1) N,N′-dimethyl-N,N′-diphenyl-malonamide (MA) and (2) N,N′-dimethyl-N,N′-diphenyl-diglycolamide (DGA) from nitric acid solution was studied. Chemical bond properties of extracted complexes were investigated by UV-VIS and FT-IR spectroscopies. The chemical bond strength between Ln(III) ions and the ligands in extracted complexes was closely related with the magnitude of the distribution ratios of Ln(III) ions: the extracted complex having a stronger bond between Ln(III) ion and the ligand showed a higher magnitude of the distribution ratio of Ln(III) ion.     

Synthesis and Structure of Cobalt(III) Complex with Cyanomethylene and N,N′-Ethylenebis(3-methylsalicylideneiminate)

Russian Journal of General Chemistry - The new complex [CoIII(3-CH3Salen)(CH2CN)]·CH3CN was synthesized and its crystal structure was determined by the X-ray diffraction analysis. The...     

GC-MS determination and optimization of extraction of N,N′-dimethyl-N,N′-diphenylcarbamide from building materials

N,N’-dimethyl-N,N’-diphenylcarbamide (centralite) extracted from building materials was quantitated using ion trap GC-MS detection technique. Both linearity and standard deviation of the calibration curve were dependent on the conditions of the mass spectral detection. The most precise calibration has been achieved by quantification of a mass ion not participating in secondary reactions and which is produced via single fragmentation. The best recovery of centralite was obtained after either 30 min of normal extraction with toluene at 60 °C or 10 min of ultrasonic extraction with chloroform at room temperature. Using the latter method resorption processes might cause decrease in efficiency of the recovery at longer extraction time. Received: 3 July 1998 / Revised: 5 November 1998 / Accepted: 26 January 1999     

Liquid–liquid extraction of neodymium (III) and europium (III) using synergic mixture of furosemide and tribenzylamine in benzyl alcohol

The extraction behavior of Nd(III) and Eu(III) with 0.05 mol dm⁻³ furosemide in benzyl alcohol as single acidic extractant and then with equimolar (0.05 mol dm⁻³) synergic mixture of furosemide as acidic extractant and tribenzylamine as neutral donor in benzyl alcohol has been studied from aqueous solutions of pH 1 to 6. The effect of various parameters and of various cations and anions on the extraction of these metal ions was investigated. The composition of the extracted adducts was determined by slope analysis method that came out to be [(M(FS)₂)⁺ (CH₃COO)⁻] and [M(FS)₃·3TBA] where M = Nd(III) and Eu(III).

     

Extraction of U(VI) and Th(IV) from nitric acid solutions with N,N,N′,N′-tetrahexylsuccinylamide

The results of monitoring of⁸⁵Kr volume activity in ground-level air of Prague over the period 1989–1995 are summariyed. Seasonal dependence with a maximum in late spring and summer months and a gradual increase of⁸⁵Kr concentration in the atmosphere were observed. Linear approximation of long-term trend in the period 1983–1995 gives the growth rate of 35 mBq·m^–3 per year. Exponential approximation provides an inter-year growth by 3.7% The measured values were compared to the prognosis of⁸⁵Kr contamination development of the atmosphere from the early 1980s. They were found to be near to the low estimate of the assumed development.     

Extraction and Mutual Separation of Actinide(III), (IV), (V) and (VI) Ions by N,N′-Dimethyl-N,N′-Dihexyl-3-Oxapentanediamide and Thenoyltrifluoroacetone

Actinide(III), (IV), (V) and (VI) ions were extracted by N,N-dimethyl-N,N-dihexyl-3-oxapentanediamide (DMDHOPDA) and thenoyltrifluoroacetone (HTTA). The extraction behaviors suggested the possibility of the mutual separation, and the convenient separation method of actinide ions (III), (IV), (V) and (VI) without reducing and oxidizing agents was studied. Th(IV) was extracted from the aqueous phase by HTTA (5 mM in toluene) in the first step. The Am(III) and U(VI) ions can be extracted by 1 and 20 mM DMDHOPDA in toluene, and the Np(V) ion can be extracted into nitrobenzene with 100 mM DMDHOPDA in the last step. The residual activities in the aqueous phase were much lower than the initial activities. These activities in the fractions were confirmed by the gamma- and the alpha-spectrometry. The one-through and rough separation is advanced, and in case of the fine isolation of actinide elements, each fraction should be purified in more detail.     

Kinetics and mechanism of the oxidation of L-ascorbic acid by the N,N′-ethylenebis(salicylideneiminato)manganese(III) complex in aqueous solution

Summary The kinetics of oxidation of l-ascorbic acid by the N,N-ethylenebis(salicylideneiminato) manganese(III) complex have been studied over the 4.5–9.3 pH range. An intermediate ascorbate complex was formed which had an inhibiting effect on the rate of the redox reaction. The rapid formation of this intermediate was followed using the stopped-flow technique, whereas its slow decomposition was monitored using a conventional spectrophotometer. The formation of this intermediate was strongly pH dependent. Addition of sodium perchlorate and sodium dodecyl sulphate (anionic surfactant) affected the reaction rate. A probable mechanism comprising both the intermediate formation and the overall redox reaction is discussed.     

Extraction and complexation of copper(II) with para-tert-butylbenzhydrazide and its N′,N′-dimethyl derivative

The extraction of copper(II) with the para-tert-butylbenzoic acid hydrazide and related N??,N??-dimethyl derivative was studied. The composition and structure of the extracted complexes were determined, the mechanism of extraction of copper(II) in different media was suggested, the extraction constant was calculated. The copper(II) complex compounds with these reagents were isolated.     

Synthesis of europium(III) phenanthroline-β-diketonate silicon-containing complex. Photoluminescence in solution and in sol-gel film

A phenanthroline benzoyltrifluoroacetonate europium complex showing a bright red photoluminescence at a wavelength 616 nm was synthesized by reacting 3-isocyanatopropyltriethoxysilane with anhydrous europium(III) tris(benzoyltrifluoroacetonate) and then with phenanthroline.     

Extraction of europium and americium into phenyltrifluoromethyl sulfone by using hydrogen dicarbollylcobaltate in the presence of N,N′-diethyl-N,N′-diphenyl-2,6-dipicolinamide

Extraction of microamounts of europium and americium by a phenyltrifluoromethyl sulfone (FS 13) solution of hydrogen dicarbollylcobaltate (H⁺B⁻) in the presence of N,N,N′,N′-tetraethyl-2,6-dipicolinamide (TEtDPA, L) has been investigated. The equilibrium data have been explained assuming that the species HL⁺, \textHL ₂ ⁺ , {\text{HL}}_{ 2}^{ + } , \textML₂^{3 +} {\text{ML}_{2}^{3 +}} and \textML ₃ ³⁺ {\text{ML}_{ 3}^{ 3+}} (M³⁺ = Eu³⁺, Am³⁺) are extracted into the organic phase. The values of extraction and stability constants of the cationic complex species in FS 13 saturated with water have been determined. It was found that the stability constants of the corresponding complexes \textEuL_n ³⁺ {\text{EuL}}_{n}^{ 3+ } and \textAmL_n ³⁺ {\text{AmL}}_{n}^{ 3+ }, where n = 2, 3 and L is TEtDPA, in the mentioned FS 13 medium are comparable.     

Temperature-dependent vibrational spectra of zinc(II) bis-(N,N′-diethyldithiocarbamate) in solid state and solution

The IR spectra of zinc(II) bis-(N,N′-diethyldithiocarbamate) in the solid state (at 20, 80 and 120°C) as well as in solution (20°C) have been recorded and discussed as to the changes in the zinc coordination sphere that may occur upon heating and dissolution. The decreased number of bands in the high-temperature and in the solution specta as compared with the room temperature solid state spectra has been explained by removal of the intermolecular contacts upon dissolution or thermal averaging in the high temperature solid state.     

Determination of trace europium(III) based on a new fluorescence enhancement system of europium(III) with N,N′-<Emphasis Type="Italic">bis</Emphasis>-(4-N-aminothiourea-2-amylidene)-4,4′-diaminodiphenyl sulfone by EDTA or alumin in N,N-dimethylformamide

A new bis-Schiff base ligand, N,N-bis-(4-N-aminothiourea-2-amylidene)-4,4-diaminodiphenyl sulfone (ARADS), was synthesized. The solutions of its complex with Eu³⁺ in DMF can emit the intrinsic fluorescence of Eu³⁺. The fluorescence intensity of the complex was enhanced 20–30-fold in the presence of EDTA (or alum). The influence of seven kinds of solvents (DMF, CH₃CN, THF, acetone, CH₃OH, C₂H₅OH, and DMSO) on the intensity of fluorescence was studied. The results showed that the Eu³⁺-ARADS-EDTA (or alum) system emits its strongest fluorescence in DMF. Thus, the system can be used to develop a new method for the determination of europium(III). The excitation and emission wavelengths are 395 and 615 nm, respectively. Under optimal conditions, the fluorescence intensities vary linearly with the concentration of Eu³⁺ in the range 6.0 × 10^–10–5.2 × 10^–5 mol/L, with a detection limit of 5.0 × 10^–10 mol/L. The interference from some rare earth metals and other inorganic ions are described. The method is a selective, sensitive, rapid, and simple analytical procedure for the determination of europium(III) in high-purity yttrium oxide and synthetic samples. The mechanism of fluorescence enhancement was also studied.__________From Zhurnal Analiticheskoi Khimii, Vol. 60, No. 4, 2005, pp. 372–377.Original English Text Copyright © 2005 by Tianlin Yang, Wenwu Qin, and Weisheng Liu.The article was submitted by the authors in English.