Electrophoretic microchip with dual-opposite injection for simultaneous measurements of anions and cations

A novel dual-injection poly(methylmethacrylate) (PMMA) microchip electrophoretic system has been designed and fabricated for simultaneous measurements of anions and cations using a single channel and detection device. It consists of two sample reservoirs, on both sides of a common separation channel. Anions and cations can be simultaneously electrokinetically injected into both ends of the separation channel. Due to lower electroosmotic flow in polymer channels compared to glass ones, the cations and anions migrate in opposite directions and can be separated from each other and detected using a movable contactless conductivity detector (MCCD) positioned around the center of the separation channel. The effects of the detector position and of the separation voltage on the response and resolution have been studied and optimized for simultaneous determination of six low-energy explosive-related ions, including ammonium, methyl ammonium, sodium, chloride, nitrate, and perchlorate in a single analytical run (of ca. 3 min). Simultaneous detection of nerve-agent degradation products along with explosive-related anions and cations is also demonstrated. The versatile system can also be used for separately measuring anions or cations. The attractive behavior of the dual-opposite injection microchip offers great promise for a wide range of applications, including "total ion analysis" of various samples.     

Triple-channel portable capillary electrophoresis instrument with individual background electrolytes for the concurrent separations of anionic and cationic species

The portable capillary electrophoresis instrument is automated and features three independent channels with different background electrolytes to allow the concurrent optimized determination of three different categories of charged analytes. The fluidic system is based on a miniature manifold which is based on mechanically milled channels for injection of samples and buffers. The planar manifold pattern was designed to minimize the number of electronic valves required for each channel. The system utilizes pneumatic pressurization to transport solutions at the grounded as well as the high voltage side of the separation capillaries. The instrument has a compact design, with all components arranged in a briefcase with dimensions of 45 (w) × 35 (d) × 15 cm (h) and a weight of about 15 kg. It can operate continuously for 8 h in the battery-powered mode if only one electrophoresis channel is in use, or for about 2.5 h in the case of simultaneous employment of all three channels. The different operations, i.e. capillary flushing, rinsing of the interfaces at both capillary ends, sample injection and electrophoretic separation, are activated automatically with a control program featuring a graphical user interface. For demonstration, the system was employed successfully for the concurrent separation of different inorganic cations and anions, organic preservatives, additives and artificial sweeteners in various beverage and food matrices.     

Solvent bonding of poly(methyl methacrylate) microfluidic chip using phase-changing agar hydrogel as a sacrificial layer

In this report, a solvent bonding method based on phase-changing agar hydrogel has been developed for the fabrication of poly(methyl methacrylate) (PMMA) microfluidic chips. Prior to bonding, the channels and the reservoir ports on PMMA channel plates were filled with molten agar hydrogel that could gelate to form solid sacrificial layers at room temperature. Subsequently, PMMA cover sheets were covered on the channeled plates and 1,2-dichlororethane was applied to the interspaces between them. The agar hydrogel in the channels could prevent the bonding solvent and the softened surface of the PMMA cover sheets from filling in the channels. After solvent bonding, the agar hydrogel in the channels and the reservoir ports was melted and removed under pressure. The sealed channels in the complete microchips had been examined by an optical microscope and a scanning electron microscope. The results indicated that high-quality bonding was achieved at room temperature. The prepared microfluidic microchips have been successfully employed in the electrophoresis separation and detection of three cations in combination with contactless conductivity detection.     

High-speed simultaneous ion-exclusion/cation-exchange chromatography of anions and cations on a weakly acidic cation-exchange resin column

The simultaneous ion-exclusion/cation-exchange separation column packed with a polymethacrylate-based weakly acidic cation-exchange resin of 3 microm particle size was used to achieve the simultaneous high-speed separation of anions and cations (Cl(-), NO3(-), SO4(2-), Na(+), K(+), NH4(+), Ca(2+) and Mg(2+)) commonly found in environmental samples. The high-speed simultaneous separation is based on a combination of the ion-exclusion mechanism for the anions and the cation-exchange mechanism for cations. The complete separation of the anions and cations was achieved in 5 min by elution with 15 mM tartaric acid-2.5 mM 18-crown-6 at a flow-rate of 1.5 ml/min. Detection limits at S/N=3 ranged from 0.36 to 0.68 microM for anions and 0.63-0.99 microM for cations. This method has been applied to the simultaneous determination of anions and cations in several environmental waters with satisfactory results.     

Ion separation in nanofluidics

Ionic species with a constant charge-to-size ratio (i.e. electrophoretic mobility) cannot be separated in electroosmotic or pressure-driven flow along microscale channels. In nanoscale channels, however, the enormous electric fields inside electrical double layers cause transverse ion distributions yielding charge-dependent mean ion speeds in the flow. Those ions with a constant charge-to-size ratio can thus be separated solely by charge (or equivalently, size) in nanofluidics. Here we develop an analytical model to optimize and compare the separation of such ions in nanochannel chromatography and nanochannel electrophoresis in terms of selectivity, plate height and resolution. Both planar and cylindrical geometries are considered. It is found that in nanoscale channels chromatography yields a larger selectivity and a larger minimum reduced plate height than electrophoresis does. The maximum resolution is, however, comparable between these two nanofluidic approaches, where the optimal channel half-height or tube radius is within the range of 1-10 times the Debye length. Our results also suggest that cations can be better separated in nanofluidics than can anions.     

Simultaneous separation of inorganic anions and cations using capillary electrophoresis with a movable contactless conductivity detector

A number of small inorganic anions and cations were separated after injection of the sample into both ends of a separation capillary. The ions were detected using a capacitively coupled contactless conductivity detector (CCCCD) which could be placed at various positions along the capillary length. Counter-directional migration of anions and cations occurs towards the detector, which is placed at an appropriate position along the capillary so that the migration order is determined by the respective effective separation capillary lengths for both anions and cations. As the CCCCD detector can be easily moved to any position along the capillary, virtually any effective separation length can be attained. Depending on the number of analytes in the sample, one can choose to obtain either electropherograms with inter-migrating zones of cations and anions or separations with distinct regions of anion and cation zones, respectively. A new term 'apparent separation selectivity' is introduced to describe the manner in which the position of the detector can be varied in order to determine the final separation.     

Retention behavior of alkali, alkaline earth and transition metal cations in ion chromatography with an unmodified silica gel column

An unmodified silica gel (Develosil 30-5) column (150×4.6 mm I.D.) has been applied to the ion chromatographic separation of alkali, alkaline earth and transition metal cations. The retention behavior of the above cations on the bare substrate was investigated using a number of weak inorganic and organic acid eluents. During this investigation, several separations were achieved and the most suitable eluent conditions were identified. It was concluded that: (a) 1.5 mM HNO₃-0.5mM pyridine-2,6-dicar☐ylic acid eluent was the most effective for the simultaneous separation of common alkali and alkaline earth metal cations, (b) 1.5 mM oxalic acid eluent resulted in the best separation of alkali, alkaline earth, and transition metal cations, (c) 0.5 mM CuSO₄ eluent could be used for the separation of alkali metal cations alone and (d) 0.5 mM ethylenediamine-oxalic acid eluent at pH 5.5 resulted in themost efficient separation of both alkaline earth and transition metal cations.     

Simultaneous separation of inorganic anions and cations by using anion-exchange and cation-exchange columns connected in tandem in ion chromatography

Inorganic anions and cations in environmental waters were determined by ion chromatography. Stationary and mobile phases were examined for the simultaneous separation of both anions and cations. Cations detection by UV detection requires a mobile phase with a UV absorbing additive, which indirectly visualizes cations as negative peaks. Simultaneous separation of anions and cations were achieved when using an eluent that consists of inorganic acid with weak basic amino acid as additives. It was convenient to separate both anions and cations by coupling anion-exchange and cation-exchange columns in tandem. The order of the separation columns connected affected the elution profiles. When the eluent comprises of multiple anions and a single cation, the anion-exchange column should be connected in the upper stream, whereas when the eluent comprises multiple cations and a single anion, the cation-exchange column should be connected in the upper stream. Use of switching valves also allowed simultaneous separation of anions and cations in a single chromatographic run. In the present work, operating conditions were optimized for the simultaneous separation of anions and cations.     

Indirect ultraviolet spectrophotometric detection in the ion chromatography of common mono- and divalent cations on an aluminium adsorbing silica gel column with tyramine-containing crown ethers as eluent

The application of laboratory-made aluminium-adsorbing silica gel (Al-Silica) as a cation-exchange stationary phase to ion chromatography-indirect photometric detection (IC-IPD) for common mono- and divalent cations (Li+, Na+, NH+, K+, Mg2+ and Ca2+) was carried out by using protonated tyramine (4-aminoethylphenol) as eluent ion. When using 1.2 mM tyramine-0.2 mM oxalic acid at pH 4.5 as eluent, incomplete separation of the monovalent cations and complete separation of the divalent cations were achieved in 17 min. Then, the addition of crown ethers in the eluent was carried out for the complete separation of the mono- and divalent cations. As a result, when using 1.2 mM tyramine--0.2 mM oxalic acid at pH 4.5 containing either 5 mM 15-crown-5 (1,4,7,10,13-pentaoxacyclopentadecane) or 0.5 mM and 18-crown-6 (1,4,7,10,13,16-hexaoxacyclooctadecane) as eluent, excellently simultaneous separation of these cations was achieved in 21 min. The proposed IC-IPD was successfully applied to the determination of major cations in natural water samples.     

Referenced Capacitively Coupled Conductivity Detector for Capillary Electrophoresis

A dual capacitively coupled contactless conductivity detector for capillary electrophoresis was developed. The two channels are arranged in a bridge configuration so that one of them acts as a reference whose signal is subtracted. This effectively compensates for the baseline conductivity of the separation buffer so that the electronic zero setting is not necessary. Changes in the buffer composition are automatically accounted for, as are temperature drifts. The system is demonstrated for the detection of inorganic model cations in capillary electrophoresis. Besides the use with two separate capillaries, one of which solely serves as reference, it was also found possible to use a single capillary which is looped back through the reference cell.     

Optimization of alkali-alkalkine earth cation separation on weak cation-exchangers

Summary The elution behavior of alkali and earth alkaline cations has been studied on a newly synthesized weak cationexchanger (WCX). Applying this stationary phase isocratic separation of these cations is possible. The dependence of retention on competing ion concentration is described via a simple model. The influence of crown ethers as well as organic eluent additives on selectivity and peak efficiency is demonstrated. With optimized separation such cations can be determined with detection limits of about 0.5 ppm using a conductivity detector without ion suppression.     

Sequential Determination of Inorganic Cations and Anions in Cerebrospinal Fluid by Microchip Electrophoresis

Analysis of inorganic ions in cerebrospinal fluid (CSF) is used mainly in the diagnostics of central nervous system diseases, such as Alzheimer’s disease or multiple sclerosis. A new analytical method for fast determination of inorganic cations (ammonium, calcium, magnesium, sodium and potassium) and anions (chloride, sulfate, nitrite and nitrate) in CSF on an electrophoretic microchip was developed in this context. Zone electrophoresis (ZE) separations were performed on the microchip with coupled channels (CC) and contact conductivity detection. Two different propionate background electrolytes were used for the sequential determination of cations at pH 3.1 and anions at pH 4.3. ZE was used for the determination of cationic constituents while ZE–ZE approach was employed for the determination of chloride in the first separation channel on the CC microchip and other anionic micro-constituents in the second channel. LOD values were in the range of 0.003–0.012 mg L⁻¹ and 0.019–0.047 mg L⁻¹ for cations and anions, respectively. Repeatability of migration time was up to 1.2 % for both cations and anions. Repeatability of peak area ranged from 0.3 to 5.6 % for cations and from 0.6 to 6.0 % for anions. Recovery of both cations and anions was in the range 90–106 %. CSF samples were only diluted appropriately without other sample pretreatment prior to analysis. Developed sequential method is suitable for fast determination of the studied cations and anions in CSF with total analysis time <15 min.

     

Quantitative determination of inorganic minor cations in sodium-, calcium-, magnesium-matrix simulated samples by capillary electrophoresis

The analysis of ammonium, alkali and alkaline-earth trace cations (0.5 ppm) in samples with a calcium, sodium or magnesium matrix (500 ppm) has been achieved using 10 mM imidazole (pH 4.5) electrolyte to which a complexing agent (15-crown-5, oxalic acid or dipicolinic acid) has been specifically added in order to decrease the electrophoretic mobility of the matrix cation and thus to allow the separation of higher mobility cations at sub-ppm concentrations. The influence of several experimental parameters (complexing agent concentration, buffer pH and temperature) have been studied in order to optimize the separation. The complexing agent concentration appears to be the main parameter governing the selectivity of the cations during the analysis of matrix samples. In optimized conditions, we have checked that the separation between minor inorganic cations is not significantly altered by an increase in the matrix cation concentration. As the concentration of the matrix cation increases, the migration times of minor cations remain unchanged even for a 1000 ppm concentration of the matrix cation. Finally, these optimized buffers allow the quantitation of minor cations down to 0.05% (w/w) for calcium- or magnesium- matrix simulated samples and 0.2% (w/w) for sodium-matrix simulated samples.     

Variable-temperature ion mobility time-of-flight mass spectrometry studies of electronic isomers of Kr2+ and CH3OH*+ radical cations

Preliminary results from a liquid nitrogen-cooled ion mobility (IM) orthogonal-time-of-flight (o-ToF) mass spectrometer applied to the separation of electronic isomers of Kr2+ and methanol radical cations (conventional and distonic) are presented. Ab initio calculations were used to estimate the energies and energy barriers to interconversion between conventional (CH3OH*+) and distonic (CH2*OH2+) radical cations. In addition, computations and experiments are used to compare ion-neutral collision cross-sections for CH3OH*+ and CH2*OH2+ radical cations and suggest that the mobility separation is achieved by ion-neutral interactions between ions and neutral buffer gas.     

Characteristics of Single Ionic Channels Induced by Sulfonic Acid Derivatives of Dibenzo-18-Crown-6 in Bilayers

Sulfonic acid derivatives of dibenzo-18-crown-6 (DB18C6) have been shown to induce formation of ion channels permeable to monovalent cations in bilayer lipid membranes (BLM). Some electric characteristics of channels have been studied by means of the voltage clamp method. Channels displayed little interionic discrimination. The voltage dependence as well as the multiple state behaviors of the channels functioning was observed. The channels formation has been shown to be dependent on pH of bath solutions and on the presence of bivalent cations in them. The channels supposed to be formed from aggregates of complexes associates assembled in aqueous salt solutions.     

Monolithic chromatography for elemental and speciation analysis

Monolithic supports are increasingly used in the field of chromatography. They are appropriate for different applications (e.g., separation of biomolecules, organic acids and inorganic anions). However, only a few research groups are investigating the potential of using monolithic phases for rapid separation of metal cations and elemental speciation analysis.Monolithic supports based on porous monolithic silica have been successfully applied in separation of alkaline-earth and transition-metal cations in environmental waters and high ionic-strength samples.The present review covers applications of monolithic supports for chromatographic separation of metal cations and the potential for using monolithic chromatography in elemental speciation analysis. We critically evaluate the performances and the advantages of monolithic supports and compare them to conventional particle-packed chromatographic supports.     

Divalent cations reduce the pH sensitivity of OmpF channel inducing the pK(a) shift of key acidic residues

In contrast to the highly-selective channels of neurophysiology employing mostly the exclusion mechanism, different factors account for the selectivity of large channels. Elucidation of these factors is essential for understanding the permeation mechanisms in ion channels and their regulation in vivo. The interaction between divalent cations and a protein channel, the bacterial porin OmpF, has been investigated paying attention to the channel selectivity and its dependence on the solution pH. Unlike the experiments performed in salts of monovalent cations, the channel is now practically insensitive to pH, being anion selective all over the pH range considered. Electrostatic calculations based on the available structural data suggest that the binding of divalent cations has two main effects: (i) the pK(a) values of key ionizable groups differ significantly from those of the isolated groups in solution and (ii) the cation binding has a decisive impact on the effective electric charge regulating the channel selectivity. A simple molecular model based on statistical thermodynamics provides additional qualitative explanations to the experimental findings that could also be useful for other related systems like synthetic nanopores, ion exchange membranes, and polyelectrolyte multilayers.     

H2bipy]2[(UO2)6Zn2(PO3OH)4(PO4)4].H2O: an open-framework uranyl zinc phosphate templated by diprotonated 4,4'-bipyridyl

Under mild hydrothermal conditions, a new organically templated uranyl zinc phosphate, [H 2bipy] 2[(UO 2) 6Zn 2(PO 3OH) 4(PO 4) 4].H 2O ( UZnP-2), has been synthesized. Structural analysis reveals that UZnP-2 is constructed from UO 7 pentagonal bipyramids that are linked into edge-sharing dimers that are in turn joined together by ZnO 4 and PO 4 tetrahedra to form a three-dimensional network. Intersecting channels occur along the a, b, and c axes. These channels house the diprotonated 4,4'-bipyridyl cations and water molecules. Ion-exchange experiments demonstrate that replacement of the 4,4'-bipyridyl cations by alkali and alkaline-earth metal cations results in a rearrangement of the framework. Further characterization of UZnP-2 is provided by Raman and fluorescence spectroscopy. The latter method reveals strong emission from the uranyl moieties with characteristic fine structure.     

Biomimetic Nanocones that Enable High Ion Permselectivity

Artificial counterparts of conical‐shaped transmembrane protein channels are of interest in biomedical sciences for biomolecule detection and selective ion permeation based on ionic size and/or charge differences. However, industrial‐scale applications such as seawater desalination, separation of mono‐ from divalent cations, and treatment of highly‐saline industrial waste effluents are still big challenges for such biomimetic channels. A simple monomer seeding experimental approach is used to grow ionically conductive biomimetic charged nanocone pores at the surface of an acid‐functionalized membrane. These readily scalable nanocone membranes enable ultra‐fast cation permeation (Na⁺=8.4× vs. Mg²⁺=1.4×) and high ion charge selectivity (Na⁺/Mg²⁺=6×) compared to the commercial state‐of‐the‐art permselective membrane (CSO, Selemion, Japan) owing to negligible surface resistance and positively charged conical pore walls.     

Adsorptive bubble separation of zinc and cadmium cations in presence of ferric and aluminum hydroxides

The adsorptive bubble separation of zinc and cadmium cations from solution in the presence of ferric and aluminum hydroxides was carried out by means of Tween 80 (nonionic surfactant), and sodium laurate and stearate (anionic surfactants). The mechanism of metal removal is different depending on the nature of the surfactant used. The removal of zinc cations by adsorbing colloid flotation is higher than that of cadmium cations. It increases with increases in the amount of hydroxide precipitate and the concentration of Tween 80. The removal of zinc cations by ion flotation is lower than that of cadmium cations. It does not change with increases in the hydroxide amount. It increases, however, with increased sodium laurate or stearate concentration. Both separation methods turned out to be helpful for studying both the solution's structure and the interactions at the solution-solid interface.