Inclusive spectra of protons and α particles from reactions induced by protons with an energy of 30.0 MeV on the 209Bi nucleus

Inclusive spectra of protons and α particles resulting from the interaction between 30.0-MeV protons and the ²⁰⁹Bi nucleus are investigated. Double differential and integral cross sections for the (p,xp) and (p,xα) reactions are obtained and total partial cross sections for these reactions are subsequently determined. The experimental spectra are analyzed using a modified version of the exciton model of preequilibrium decay and the PRECO-2006 code. Contributions from the compound and direct mechanisms to the formation of integral cross sections are calculated.     

Measurement of the total spectrum of electrons and positrons in the energy range of 300–1500 GeV in the PAMELA experiment with the aid of a sampling calorimeter and a neutron detector

A method based on the use of a sampling calorimeter was developed for measuring the total energy spectrum of electrons and positrons from high-energy cosmic rays in the PAMELA satellite-borne experiment. This made it possible to extend the range of energies accessible to measurements by the magnetic system of the PAMELA spectrometer. Themethod involves a procedure for selecting electrons on the basis of features of a secondary-particle shower in the calorimeter. The results obtained by measuring the total spectrum of cosmic-ray electrons and positrons in the energy range of 300–1500 GeV by the method in question are presented on the basis of data accumulated over a period spanning 2006 and 2013.

     

Optimization of the cell in the ion–optical system of a powerful source of protons with energy 15 keV

We have described the results of numerical investigations of different versions of a three-electrode elementary slit cell for the formation a hydrogen ion beam with a relatively low energy and a high emission current density. The version of the cell chosen from the results of these investigations makes it possible to obtain a hydrogen atom beam with an energy of 15 keV, an ion current density of ~500 mA/cm², and an angular divergence of 24 mrad.     

Measurement and simulation of partial discharge in oil-paper insulation under the combined AC–DC voltage

Depending on unique operation characteristics for voltage applied on valve side winding of the converter transformers, it is extraordinarily significant to study the partial discharge (PD) behavior with oil-paper insulation under combined AC–DC voltage. Therefore, this paper investigated PD inception characteristics by pulse current methods with needle-plate electrode system under combined AC–DC voltage. Furthermore, 3D electric field distributions versus combined AC–DC voltage in different ratios were calculated by Finite Element Analysis (FEA). An experimental conclusion was drew that AC partial discharge inception voltage (PDIV) in pure oil would decrease linearly with the DC component increasing but the inception voltage with oil-paper insulation appeared to be independent of DC voltage and dependent of AC voltage. And 3D electric field distribution deduced from simulation provided a supplementary proof on the experimental results. Moreover, high speed photography was used to capture emitted light produced by discharge, estimate streamer velocity (1.8 km/s) and record streamer initiation and propagation process in oil gap. Previous studies have shown that the prebreakdown phenomena involving the generation and propagation of vapor channels through the oil could be divided into a three-stage process.     

Molecular dynamics simulation for the sputtering of an Al2O3 sample bombarded with MeV Si ions

Sputtering yield and kinetic energy distribution (KED) of Al particles from an Al₂O₃ sample bombarded with 1－5 MeV Si ions have been simulated using the molecular dynamics method. These have also been measured experimentally with a conventional time-of-flight facility. In the simulation, a new interatomic potential specific to the Al₂O₃ target was developed, and both the nuclear energy loss S_n and electronic energy loss S_e were taken into consideration. By carefully adjusting the simulation parameters, the simulated sputtering yields fit well with the experimental results, and the simulated KED of Al particles also fits roughly with the experimental KED after being modified theoretically.     

Correlations and conductivity of interacting fermions in a disordered chain—a Monte Carlo simulation

The interplay between disorder and interaction in a one dimensional system of fermions is investigated by the use of a Monte Carlo simulation. The model considered (Hubbard Anderson Model) is a combination of the Anderson model, for noninteracting fermions in a random potential, and the extended Hubbard model, for interacting fermions in a periodic potential. To study the physics of this model, a (Quantum) Monte Carlo simulation is performed for a finite chain of 120 sites. The simulation is done for different band fillings, and several values of the interaction parameters and the strength of disorder. The low frequency behaviour of the conductivity is calculated as well as the static correlation functions for the charge density and the spin density. From the results for these quantities the competition between disorder-induced effects (Anderson localization) and interaction-induced effects (Mott transition, long range order) is studied.     

Changes in the structural phase state of a copper substrate’s surface layer bombarded with titanium ions

The structural-phase state of a copper substrate’s surface layer treated with titanium ions is investigated. It is established via X-ray diffraction analysis that intermetalides of the Cu-Ti type formed in the surface layer following treatment. It is found by means of scanning electron microscopy that a netlike porous structure with characteristic crosswise horizontal and vertical element dimensions of ～1–2 μm forms in the surface layer.     

“Volume trapping” of protons in the channeling regime in a bent crystal

A computer analysis of the “volume trapping” effect for 1 GeV protons in the planar channeling regime in a bent Si crystal has been performed. The dependences of the trapping efficiency on the beam incidence angle and the bending radius of the crystal have been obtained.     

Effects of the extra Z-boson in e+e−→W+W− reactions

We calculate the total and differential cross sections for the process e⁺e⁻→W⁺W⁻ including the effects of the extra Z-boson coming from the E₈⊗E₈ superstring. It is pointed out that the observation of the total and differential cross sections can determine the relative sign of the Weinberg angle τ_w and the mixing angle τ_e between Z^'₀ and Z _E.     

A Measurement Method of Time Jitter of a Laser Pulse with Respect to the Radio—Frequency Wave Phase in a Photocathode Radio—Frequency Gun

In a photo-cathode radio-frequency(rf) gun,the micro-bunched charge output from the gun is dependent linearly on he laser injection phase,due to the Scottay effect in the process of photoemission and the procedure of the electron logitudinal acceleration.Based on this principle,a new method is proposed ,which should be utilized to measure the time jitter between the driving laser pulse and the rf phase with a very high resolution of a few tens of femtoseconds.     

Electromagnetic design and beam dynamics simulation of a new superconducting accelerating structure for extremely low β protons

For the application of high intensity continuous wave(CW) proton beam acceleration, a new superconducting accelerating structure for extremely low β protons working in TE210 mode has been proposed at Peking University. The cavity consists of eight electrodes and eight accelerating gaps. The cavity's longitudinal length is368.5 mm, and its transverse dimension is 416 mm. The RF frequency is 162.5 MHz, and the designed proton input energy is 200 ke V. A peak field optimization has been performed for the lower surface field. The accelerating gaps are adjusted by phase sweeping based on KONUS beam dynamics. The first four gaps are operated at negative synchronous RF phase to provide longitudinal focusing. The subsequent gaps are 0?sections which can minimize the transverse defocusing effect. Solenoids are placed outside the cavity to provide transverse focusing. Numerical calculation shows that the transverse defocusing of the KONUS phase is about three times smaller than that of the conventional negative synchronous RF phase. The beam dynamics of a 10 m A CW proton beam is simulated by the Trace Win code. The simulation results show that the beam's transverse size is under effective control, while the increase in the longitudinal direction is slightly large. Both the Trace Win simulation and the numerical calculation show that the cavity has a relatively high effective accelerating gradient of 2.6 MV/m. On the whole, our results show that this new accelerating structure may be a possible candidate for superconducting operation at such a low energy range.     

Measurement of the η production in proton-proton collisions with the COSY time-of-flight spectrometer

The reaction pp → ppη was measured at excess energies of 15 and 41 MeV at an external target of the Jülich Cooler Synchrotron COSY with the time-of-flight spectrometer. About 25000 events were measured for the excess energy of 15 MeV and about 8000 for 41 MeV. Both protons of the process ppη were detected with an acceptance of nearly 100% and the η was reconstructed by the missing-mass technique. For both excess energies the angular distributions are found to be nearly isotropic. In the invariant-mass distributions strong deviations from the pure phase space distributions are seen. Received: 24 May 2002 / Accepted: 20 September 2002 / Published online: 17 January 2003 RID="a" ID="a"e-mail: e.roderburg@fz-juelich.de Communicated by M. Gar?on     

Unitarity equations and structure of theS-matrix at them-particle threshold in a theory with purem→m interaction

The structure of theS-matrix at them-partical thresholds=(m)² of amm process (m2) inv-dimensional space-time is determined in a theory with a simplified unitarity equation corresponding to a puremm interaction. If (m–1)(v–1) is odd, a two-sheeted, square-root type structure is obtained as in the usual case of two-particle thresholds in dimension 4. The nature of the singularity is more complicated if (m–1)(v–1) is even (e.g.m=3 in dimension 4). Results obtained in this case include an orthogonal decomposition of the scattering functionT with nonholomic eigenvalues of the form [1/2iln+b _i ()]^–1 [where =(m)²–s andb _i is uniform around =0] and a related infinite expansion ofT in powers of ln involving an on-shell irreducible kernelU which is the analogue for (m–1)(v–1) even of Zimmerman'sK-matrix.     

Phase-field simulation of dendritic growth in a binary alloy with thermodynamics data

This paper simulates the dendrite growth process during non-isothermal solidification in the Al-Cu binary alloy by using the phase-field model. The heat transfer equation is solved simultaneously. The thermodynamic and kinetic parameters are directly obtained from existing database by using the Calculation of Phase Diagram （CALPHAD） method. The effects of the latent heat and undercooling on the dendrite growth, solute and temperature profile during the solidification of binary alloy are investigated. The results indicate that the dendrite growing morphologies could be simulated realistically by linking the phase-field method to CALPHAD. The secondary arms of solidification dendritic are better developed with the increase of undercooling. Correspondingly, the tip speed and the solute segregation in solid-liquid interface increase, but the tip radius decreases.     

End-to-end simulation of the C-ADS Injector Ⅱ with a 3-D field map

The InjectorⅡ, one of the two parallel injectors of the high-current superconducting proton driver linac for the China Accelerator-Driven System (C-ADS) project, is being designed and constructed by the Institute of Modern Physics. At present, the design work for the injector is almost finished. End-to-end simulation has been carried out using the TRACK multiparticle simulation code to check the match between each acceleration section and the performance of the injector as a whole. Moreover, multiparticle simulations with all kinds of errors and misalignments have been performed to define the requirements of each device. The simulation results indicate that the lattice design is robust. In this paper, the results of end-to-end simulation and error simulation with a 3-D field map are presented.