Photosystem I patterning imaged by scanning electrochemical microscopy

We report the first directed adsorption of Photosystem I (PSI) on patterned surfaces containing discrete regions of methyl- and hydroxyl-terminated self-assembled monolayers (SAMs) on gold. SAM and PSI patterns are characterized by scanning electrochemical microscopy (SECM). The insulating protein complex layer blocks the electron transfer of the SECM mediator, thereby reducing the electrochemical current significantly. Uniformly and densely packed adsorbed protein layers are observed with SECM. Pattern images correlate with our previous studies where we showed that low-energy surfaces (e.g., CH3-terminated) inhibit PSI adsorption in the presence of Triton X-100, whereas high-energy surfaces (e.g., OH-terminated) enable adsorption. Therefore, a SAM pattern with alternating methyl and hydroxyl surface regions allows PSI adsorption only on the hydroxyl surface, and this is demonstrated in the resulting SECM images.     

The local electrochemical behavior of the AA2098-T351 and surface preparation effects investigated by scanning electrochemical microscopy

In this work, scanning electrochemical microscopy (SECM) measurements were employed to characterize the electrochemical activities on polished and as-received surfaces of the 2098-T351 aluminum alloy (AA2098-T351). The effects of the near surface deformed layer (NSDL) and its removal by polishing on the electrochemical activities of the alloy surface were evaluated and compared by the use of different modes of SECM. Confocal laser scanning microscopy (CLSM) and scanning electron microscopy (SEM) were also employed to characterize the morphology of the surfaces. The surface chemistry was analyzed by X-ray photoelectron spectroscopy (XPS). The surface generation/tip collection (SG/TC) and competition modes of the SECM were used to study hydrogen gas (H₂) evolution and oxygen reduction reactions, respectively. H₂ evolution and oxygen reduction were more pronounced on the polished surfaces. The feedback mode of SECM was adopted to characterize the electrochemical activity of the polished surface that was previously corroded by immersion in a chloride-containing solution, in order to investigate the influence of the products formed on the active/passive domains. The precorroded surface and as-received surfaces revealed lower electrochemical activities compared with the polished surface showing that either the NSDL or corrosion products largely decreased the local electrochemical activities at the AA2098-T351 surfaces.     

Optimized preparation and scanning electrochemical microscopy analysis in feedback mode of glucose oxidase layers grafted onto conducting carbon surfaces

An optimized immobilization procedure based on the electroreduction of aryldiazonium salt followed by covalent attachment of a cross-linked hydrogel was used to graft glucose oxidase on a carbon surface. Scanning electrochemical microscopy (SECM) and cyclic voltammetry were used to follow the construction steps of the modified electrode. By adjusting the compactness of the layer through the electrografting reaction, the penetration of the mediator through the layer can be controlled to allow the monitoring of the enzymatic activity by both cyclic voltammetry and SECM in feedback mode. The enzymatic activity of the film is finally characterized by SECM.     

Scanning electrochemical microscopy for the direct patterning of a gold surface with organic moities derived from iodonium salt

The scanning electrochemical microscope (SECM) is used in the direct mode to draw patterns of a thin passivating organic layer on a gold electrode surface and to image them. The patterning is ensured by the local electrografting of the organic moieties obtained by reduction of an aryliodonium salt, as evidenced by XPS and SECM line scans. The resolution of the writing process is controlled by the charge injected.     

Quantification of the surface diffusion of tripodal binding motifs on graphene using scanning electrochemical microscopy

The surface diffusion of a cobalt bis-terpyridine, Co(tpy)(2)-containing tripodal compound (1·2PF(6)), designed to noncovalently adsorb to graphene through three pyrene moieties, has been studied by scanning electrochemical microscopy (SECM) on single-layer graphene (SLG). An initial boundary approach was designed in which picoliter droplets (radii ~15-50 μm) of the tripodal compound were deposited on an SLG electrode, yielding microspots in which a monolayer of the tripodal molecules is initially confined. The time evolution of the electrochemical activity of these spots was detected at the aqueous phosphate buffer/SLG interface by SECM, in both generation/collection (G/C) and feedback modes. The tripodal compound microspots exhibit differential reactivity with respect to the underlying graphene substrate in two different electrochemical processes. For example, during the oxygen reduction reaction, adsorbed 1·2PF(6) tripodal molecules generate more H(2)O(2) than the bare graphene surface. This product was detected with spatial and temporal resolution using the SECM tip. The tripodal compound also mediates the oxidation of a Fe(II) species, generated at the SECM tip, under conditions in which SLG shows slow interfacial charge transfer. In each case, SECM images, obtained at increasing times, show a gradual decrease in the electrochemical response due to radial diffusion of the adsorbed molecules outward from the microspots onto the unfunctionalized areas of the SLG surface. This response was fit to a simple surface diffusion model, which yielded excellent agreement between the two experiments for the effective diffusion coefficients: D(eff) = 1.6 (±0.9) × 10(-9) cm(2)/s and D(eff) = 1.5 (±0.6) × 10(-9) cm(2)/s for G/C and feedback modes, respectively. Control experiments ruled out alternative explanations for the observed behavior, such as deactivation of the Co(II/III) species or of the SLG, and verified that the molecules do not diffuse when confined to obstructed areas. The noncovalent nature of the surface functionalization, together with the surface reactivity and mobility of these molecules, provides a means to couple the superior electronic properties of graphene to compounds with enhanced electrochemical performance, a key step toward developing dynamic electrode surfaces for sensing, electrocatalysis, and electronic applications.     

On the diffusion of ferrocenemethanol in room-temperature ionic liquids: an electrochemical study

The electrochemical behaviour of ferrocenemethanol (FcMeOH) has been studied in a range of room-temperature ionic liquids (RTILs) using cyclic voltammetry, chronoamperomery and scanning electrochemical microscopy (SECM). The diffusion coefficient of FcMeOH, measured using chronoamperometry, decreased with increasing RTIL viscosity. Analysis of the mass transport properties of the RTILs revealed that the Stokes-Einstein equation did not apply to our data. The "correlation length" was estimated from diffusion coefficient data and corresponded well to the average size of holes (voids) in the liquid, suggesting that a model in which the diffusing species jumps between holes in the liquid is appropriate in these liquids. Cyclic voltammetry at ultramicroelectrodes demonstrated that the ability to record steady-state voltammograms during ferrocenemethanol oxidation depended on the voltammetric scan rate, the electrode dimensions and the RTIL viscosity. Similarly, the ability to record steady-state SECM feedback approach curves depended on the RTIL viscosity, the SECM tip radius and the tip approach speed. Using 1.3 μm Pt SECM tips, steady-state SECM feedback approach curves were obtained in RTILs, provided that the tip approach speed was low enough to maintain steady-state diffusion at the SECM tip. In the case where tip-induced convection contributed significantly to the SECM tip current, this effect could be accounted for theoretically using mass transport equations that include diffusive and convective terms. Finally, the rate of heterogeneous electron transfer across the electrode/RTIL interface during ferrocenemethanol oxidation was estimated using SECM, and k(0) was at least 0.1 cm s(-1) in one of the least viscous RTILs studied.     

Properties of mixed alkanethiol-dendrimer layers and their applications in biosensing

We studied the properties of mixed alkanethiol-dendrimer layers on a gold support and their application in biosensing. We showed that properties of glucose sensor can be modified using a different ratio of 1-hexadecanethiol (HDT) and poly(amidoamine) dendrimer of first generation (G1). The cyclic voltammetry in the presence of the redox couple, Fe(CN)(6)(3-)/Fe(CN)(6)(4-), was used for estimating how effectively the layer blocks the redox probe's access to the electrode surface. A scanning electrochemical microscope (SECM) was used to image the resulting distribution of the organic compounds. We found that with increasing content of dendrimers, the integrity of the layers was improved.     

Localized Visualization of Chemical Cross-Talk in Microsensor Arrays by Using Scanning Electrochemical Microscopy

 An investigation of an array of four Pt microband electrodes 25 μm wide and spaced 25 μm apart was performed with the scanning electrochemical microscope (SECM). Where possible the SECM measurements were confirmed with conventional electrochemical measurements. It is shown how the sensiti- vity of the SECM recycling current to the activity of the underlying surface can be used to probe the homogeneity of enzyme-modified microelectrodes. The diffusion of H₂O₂ between these micro enzyme- electrodes and unmodified electrodes was investigated and it was demonstrated how the SECM can be a powerful tool in the elucidation of the properties of these electrodes. Received June 8, 1998. Revision November 12, 1998.     

Effect of Residual Stress on Corrosion Sensitivity of Carbon Steel Studied by SECM

The effect of compressive residual stress on the reactivity of carbon steel in a neutral chloride solution was investigated by means of potentiodynamic polarization and local electrochemical measurement with scanning electrochemical microscope（SECM）. Meanwhile, X-ray diffraction, as a nondestructive technique, was employed to determine the levels of residual stress in near-surface layers of carbon steel specimen. The results show that the resi- dual stress existed in the specimen fell into the category of compressive residual stress which was inversely propor- tional to the corrosion sensitivity of carbon steel specimen. By using I/I3 couple as a redox mediator in the current feedback mode of SECM measurements, the Faradaic current on Pt tip, which was relevant to the rate of the I3- ion reduction, fell with the increase of compressive residual stress. The correlation between compressive residual stress and heterogeneous electron transfer rate has been proposed based on the inference of the localized electrochemical reactions occurred on the specimen surface,     

Non‐destructive Patterning of Carbon Electrodes by Using the Direct Mode of Scanning Electrochemical Microscopy

Patterning of glassy carbon surfaces grafted with a layer of nitrophenyl moieties was achieved by using the direct mode of scanning electrochemical microscopy (SECM) to locally reduce the nitro groups to hydroxylamine and amino functionalities. SECM and atomic force microscopy (AFM) revealed that potentiostatic pulses applied to the working electrode lead to local destruction of the glassy carbon surface, most likely caused by etchants generated at the positioned SECM tip used as the counter electrode. By applying galvanostatic pulses, and thus, limiting the current during structuring, corrosion of the carbon surface was substantially suppressed. After galvanostatic patterning, unambiguous proof of the formation of the anticipated amino moieties was possible by modulation of the pH value during the feedback mode of SECM imaging. This patterning strategy is suitable for the further bio‐modification of microstructured surfaces. Alkaline phosphatase, as a model enzyme, was locally bound to the modified areas, thus showing that the technique can be used for the development of protein microarrays.     

Kinetic studies of glucose oxidase in polyelectrolyte multilayer films by means of scanning electrochemical microscopy (SECM)

Multilayer films of glucose oxidase (GOx) and poly(dimethyl diallyl ammonium chloride) (PDDA) prepared by layer-by-layer deposition were studied using scanning electrochemical microscopy (SECM). Aminated glass slides were coated with five bilayers of poly(styrene sulfonate) (PSS) and PDDA and used as substrates onto which GOx/PDDA multilayers were deposited. UV-Vis experiments confirmed multilayer growth, scanning force microscopic images provided morphological information about the films. SECM current-distance curves enabled the determination of kinetic information about GOx in GOx/PDDA multilayers as a function of layer number, film termination, inert covering layers, and enzyme substrate concentration after fitting to numerical models. The results indicate that only the topmost layers contributed significantly to the conversion. An odd-even pattern was observed for PDDA-terminated films or GOx-terminated films that correlated with morphological changes.     

Facilitated tip-positioning and applications of non-electrode tips in scanning electrochemical microscopy using a shear force based constant-distance mode

In scanning electrochemical microscopy (SECM) a microelectrode is usually scanned over a sample without following topographic changes (constant-height mode). Therefore, deconvolution of effects from distance variations arising from non-flat sample surface and electrochemical surface properties is in general not possible. Using a shear force-based constant distance mode, information about the morphology of a sample and its localized electrochemical activity can be obtained simultaneously. The setup of the SECM with integrated constant-distance mode and its application to non-flat or tilted surfaces, as well as samples with three-dimensional surface structures are presented and discussed. The facilitated use of non-amperometric tips in SECM like enzyme-filled glass capillaries is demonstrated.     

Label‐Free Electrochemical Imaging of Latent Fingerprints on Metal Surfaces

A label‐free electrochemical method based on scanning electrochemical microscopy (SECM) has been developed to image latent fingerprints with high resolution on five kinds of metal surfaces (platinum, gold, silver, copper and stainless steel), as it could measure the minor conductivity differences of the substrate surface and avoid the interference of the background‐color. The images of sebaceous fingerprints on clean metals were revealed by SECM with ferrocene methanol acting as a redox mediator to detect the topology of the fingerprint deposits in constant‐height feedback mode. Inhibition of electrochemical processes on areas of the surface masked by the insulating fingerprint residues generated a negative image of the fingerprint.     

Review: Recent applications of scanning electrochemical microscopy to the study of charge transfer kinetics

Scanning electrochemical microscopy (SECM) has been proven to be a valuable technique for the quantitative investigation and surface analysis of a wide range of processes that occur at interfaces. In particular, there is a great deal of interest in studying the kinetics of charge transfer characteristics at the solid/liquid and liquid/liquid interface. This overview outlines recent advances and applications of SECM to the investigation of charge transfer reactions at the solid/liquid interface and liquid/liquid interface.     

Electrochemical characterization of self-assembled thiol-porphyrin monolayers on gold electrodes by SECM.

Herein, the scanning electrochemical microscopy (SECM) approach is applied to study the formation of thiol-porphyrin self-assembled monolayer (SAMs). Using cyclic voltammetry (CV), the formation process is characterized adopting different probe molecules. The observed phenomena indicate that the formation process is affected by solution properties and the molecular structure of the probe molecules. In K(3)Fe(CN)(6) , the SAMs show a strong electron-transfer (ET) blocking effect on a pure porphyrin-modified electrode. However, addition of metal ions to the porphyrin molecules leads to ET. A consistent tendency is observed throughout the modification process using CV and SECM methods. Furthermore, k(eff) values, the apparent heterogeneous rate constants, obtained for different modification periods affirm the validity of these results. SECM images are used to collect surface information in the course of the modification process when the substrate potential is 0.5 V versus Ag/AgCl. The effect of the substrate potential indicates that the oxidation of the porphyrin molecules is supported by more positive potentials because of the similar bimolecular reaction of the porphyrin ring with positive charge and the probe molecules with negative charge.     

All-cellulose multilayers: long nanofibrils assembled with short nanocrystals

Self-organized multilayer films were formed by sequential addition of oppositely charged cellulose I nanoparticles. The all-cellulosic multilayers were prepared via adsorption of cationicially modified cellulose nanofibrils (cat NFC) and anionic short crystalline cellulose (CNC) at pH 4.5 and pH 8.3. The properties and build-up behavior of layer-by-layer-constructed films were studied with microgravimetry (QCM-D) and the direct surface forces in these systems were explored with colloidal probe microscopy to gain information about the fundamental interplay between cat NFC and anionic CNC. The importance of the first layer on the adsorption of the consecutive layers was demonstrated by comparing pure in situ adsorption in the QCM-D with multilayer films made by spin coating the first cationic NFC layer and then subsequently adsorbing the following layers in situ in the QCM-D chamber. Differences in adsorbed amount and viscoelastic behavior were observed between those two systems. In addition, a significant pH dependence of cat NFC charge was found for both direct surface interactions and layer properties. Moreover the underlying cellulose layer in multilayer film was established to influence the surface forces especially at lower pH, where the cat NFC chains extensions were facilitated and overall charge was affected by the cationic counterpart within the layers. This enhanced understanding the effect of charge and structure on the interaction between these renewable nanoparticles is valuable when designing novel materials based on nanocellulose.     

Electrochemical investigation of thin PEDOT film above an insulating substrate using scanning electrochemical microscopy

Thin layer of conducting polymer, poly(3,4-ethylenedioxythiophene) PEDOT, deposited on insulating substrates was electrochemically investigated. This study was performed through the reaction with a series of electrogenerated mediators at a microelectrode operating in the configuration of a scanning electrochemical microscope (SECM). The method proves to be a convenient tool for investigating redox properties of the electroactive materials onto insulating substrate and the occurrence of electron transfers across the modified substrate. The SECM results demonstrate the possibility of the regeneration of the mediator at the modified surface even if the used substrate is an insulator. The regeneration rate depends on the standard redox potential of the mediator, on the switching potential of the polymer and on its initial oxidation state. In addition, the obtained data could be analyzed through the construction of the steady state voltammograms allowing the extraction of the electrochemical properties of the thin organic layer deposited onto insulating surface.     

Scanning electrochemical microscopy studies of glutathione-modified surfaces. An erasable and sensitive-to-reactive oxygen species surface

A surface sensitive to reactive oxygen species (ROS) was prepared by reduction of a diazonium salt on glassy carbon electrode followed by the chemical coupling of glutathione (GSH) playing the role of an antioxidant species. The presence of active GSH was characterized through spectroscopic studies and electrochemical analysis after labeling of the -SH group with ferrocene moieties. The specific reactivity of GSH vs ROS was evaluated with scanning electrochemical microscopy (SECM) using the reduction of O(2) to superoxide, O(2)(?-), near the GSH-modified surface. Approach curves show a considerable decrease of the blocking properties of the layer due to reaction of the immobilized GSH with O(2)(?-) and the passage of GSH to the glutathione disulfide (GSSG). The initial surface could be regenerated several times with no significant variations of its antioxidant capacity by simply using the biological system glutathione reductase (GR)/NADPH that reduces GSSG back to GSH. SECM imaging shows also the possibility of writing local and erasable micropatterns on the GSH surface by production of O(2)(?-) at the tip probe electrode.     

Imaging of enzyme activity by scanning electrochemical microscope equipped with a feedback control for substrate-probe distance

The enzymatic activity of diaphorase (Dp) immobilized on a solid substrate was characterized using a scanning electrochemical microscope (SECM) with shear force feedback to control the substrate-probe distance. The shear force between the substrate and the probe was monitored with a tuning fork-type quartz crystal and used as the feedback control to set the microelectrode probe close to the substrate surface. The sensitivity and the contrast of the SECM image were improved in the constant distance mode (distance, 50 nm) with the shear force feedback compared to the image in the constant height mode without the feedback. By using this system, the SECM and topographic images of the immobilized diaphorase were simultaneously measured. The microelectrode tip used in this study was ground aslant like a syringe needle in order to obtain the shaper topographic images. This shape was also effective for avoiding the interference during the diffusion of the enzyme substrates.     

Self-healing characteristic of praseodymium conversion coating on AZNd Mg alloy studied by scanning electrochemical microscopy

Application of rare earth conversion coatings as a surface treatment for magnesium has been the subject of several studies revealing the potential to act as an effective passivating layer. Herein a mechanistic study is presented on the formation of a rare earth conversion layer based on Pr(NO₃)₃ on AZ80X magnesium alloy in simulated biological (buffered) solution. Scanning electrochemical microscopy (SECM) was used to investigate the insulating properties and degradation behaviour of the Pr conversion layer. The self-healing properties of the conversion layer in the presence of Pr^3 + were also studied using SECM. Results revealed the self-healing characteristic of the Pr conversion film in the presence of active, Pr^3 +, species. The Pr conversion layer provided passivation in the short term by producing an electrochemically inert and insulating layer. SECM results in potentiometric mode elucidated the role of near surface pH in the formation of the conversion coating.