Promoting grain growth in Ni-rich single-crystal cathodes for high-performance lithium-ion batteries through Ce doping

Journal of Solid State Electrochemistry - Preparing a high-performance Ni-rich single-crystal cathode for Li-ion batteries is challenging. This is because calcination must be performed at a high...     

Nanostructured Mn-based oxides as high-performance cathodes for next generation Li-ion batteries

Mn-based oxides have been regarded as a promising family of cathode materials for high-performance lithium-ion batteries,but the practical applications have bee...     

A defective iron-based perovskite cathode for high-performance IT-SOFCs: Tailoring the oxygen vacancies using Nb/Ta co-doping

The sluggish kinetics of the electrochemical oxygen reduction reaction(ORR) in intermediatetemperature solid oxide fuel cells(IT-SOFCs) greatly limits the overall cell performance. In this study,an efficient and durable cathode material for IT-SOFCs is designed based on density functional theory(DFT) calculations by co-doping with Nb and Ta the B-site of the SrFeO_3-δ perovskite oxide. The DFT calculations suggest that Nb/Ta co-doping can regulate the energy band of the parent SrFeO     

Economical cobalt-free single-crystal LiNi0.6Mn0.4O2 cathodes for high-performance lithium-ion batteries

Journal of Solid State Electrochemistry - With the scarcity of cobalt resources and soaring prices, the removal of cobalt from nickel-rich layered cathodes is now a priority to reduce the material...     

Determination of kinetic parameters for interfacial enzymatic reactions on self-assembled monolayers

This paper reports a method to characterize the kinetic constants for the action of enzymes on immobilized substrates. This example uses cutinase, a serine esterase that hydrolyzes 4-hydroxyphenyl valerate moieties that are immobilized on a self-assembled monolayer of alkanethiolates on gold. The product of the enzyme reaction is a hydroquinone, which is redox active and therefore permits the use of cyclic voltammetry to monitor the extent of reaction in situ. A kinetic model based on the Michaelis-Menten formalism is used to analyze the dependence of initial rates of reaction on both the substrate density and the enzyme concentration. The resulting value of k(cat)/K(M) for the interfacial reaction is comparable to that for a homogeneous phase reaction with a substrate of similar structure. This strategy of using monolayers presenting substrates for the enzyme and cyclic voltammetry to measure reaction rates provides quantitative and real-time information on reaction rates and permits a level of analysis of interfacial enzyme reactions that to date has been difficult to realize.     

Application of FTIR spectra for evaluating interfacial reactions in metal matrix composites

Manufacturing of Saffil/MgLi metal matrix composites by the melt infiltration process is accompanied by extensive interfacial redox reaction between δ-Al₂O₃ fibers (Saffil) and lithium. The present paper deals with the Fourier transform infrared spectroscopy examination of Saffil fibers isolated from Mg–8 wt% Li alloy by the bromine/methylacetate agent focusing on the insertion of Li⁺ ions into δ-Al₂O₃ and their influence on water adsorption. Insertion of Li⁺ into δ-Al₂O₃ is monitored by gradual change of Al–O stretching bands (400–900 cm⁻¹) towards more simple patterns of a spinel-like product assigned as δ(Li) which transforms to LiAl₅O₈ during subsequent annealing. Rapid increase in the water adsorption with increase in Li content, indicated by the changes in H–O–H bending (about 1,650 cm⁻¹) and O–H stretching (about 3,500 cm⁻¹), is connected with the ionicity of the δ(Li) phase, which attracts polar water molecules.     

Ionic covalent organic frameworks with tailored anionic redox chemistry and selective ion transport for high-performance Na-ion cathodes

Employing cathode materials with multiple redox couples and electrolytes with efficient cation transport kinetics are two effective approaches to improving the electrochemical performance of batteries. In this work, for the first time, we present a design strategy of simultaneously realizing reversible cationic and anionic redox chemistries as well as selective anion/cation transport in the viologen-based COFs(BAVCOF:X, coordinated anions of X = Cl^-, Br^-, I^-, and...     

Improved method for direct high-performance liquid chromatography assay of angiotensin-converting enzyme-catalyzed reactions

A rapid and sensitive assay was developed for determination of the activity of angiotensin-converting enzyme (ACE) in the presence of inhibitory peptides present in soybean protein hydrolysates. The method utilizes reversed-phase high-performance liquid chromatography (HPLC) to separate and quantify hippuryl-histidyl-leucine (HHL) and hippuric acid (HA). HHL and HA were separated on a Symmetry C₁₈ column by gradient elution that used mixtures of trifluoroacetic acid (TFA)–acetonitrile and TFA–water as solvents. Analytical time and baseline separation of HA from HHL were improved over previous HPLC methods. In comparison to the standard spectrophotometric method, the new HPLC method obviates the need for ethyl acetate extraction of HA but requires direct injection of the ACE reaction mixture onto the HPLC column.     

Rapid evaluation and screening of interfacial reactions on self-assembled monolayers

This paper reports 16 chemical reactions for elaborating the structures of self-assembled monolayers (SAMs) of alkanethiolates on gold. This work takes advantage of matrix-assisted laser desorption/ionization and time-of-flight mass spectrometry (MALDI-TOF MS) to rapidly characterize the products and yields of reactions that occur with molecules attached to monolayers. The paper also describes a method for screening reaction conditions, wherein monolayers are treated with an array of reactants and mass spectrometry is used to identify those regions that undergo reactions to give new, and unanticipated, products in high yield. These examples serve to increase the collection of reactions that can be used to elaborate the structures, and therefore the properties, of self-assembled monolayers of alkanethiolates on gold and to introduce label-free methods for screening interfacial reactions.     

An interfacial voltaic cell for monitoring acid—base reactions in non-aqueous media

The interfacial device described is based on a Pt/corundum disc/antimony scratch/0.1 M KCl/Hg₂Cl₂/Hg/Pt cell. Acid—base reactions occurring at the interface of two solvents can be followed in solvents such as dry benzene, chloroform and 1,2-dichloroethane.     

Isoxazoline-carbocyclic aminols for nucleoside synthesis through aza-Diels-Alder reactions

A novel approach to useful aminols for the synthesis of carbocyclic nucleosides is reported starting from a convenient source, the 2-azanorborn-5-enes. These are readily available through the Grieco cycloaddition of cyclopentadiene with iminium salts and are reactive dipolarophiles toward nitrile oxides. The prolific elaboration of the isoxazoline cycloadducts allowed preparation of the target aminols through the unmasking of the hydroxymethylene group at the C3 level of the azanorbornene structure.     

Rational design of robust nano-Si/graphite nanocomposites anodes with strong interfacial adhesion for high-performance lithium-ion batteries

The nano-Si/graphite nanocomposites are the promising anodes candidates for high-energy lithium-ion batteries because of their high theoretical capacities and low volume variations.However,the nano-Si has a severe tendency to separate from the graphite substrate due to the inherently weak bonding between them,thus leading to the deteriorated cycling performance and low Coulombic efficiency.Herein,we design a robust nano-Si/graphite nanocomposite structure with strong interfacial adhesion caused by the Si—Ti and Ti—C covalent bonds.The abundant Si—Ti and Ti—C bonds formed between nano-Si and graphite greatly enhance the interfacial adhesion force,resulting in the highly stabilized and integrated electrode structure during battery cycling.Consequently,the as-obtained nano-Si/graphite anodes deliver a high capacity retention of 90.0% after 420 cycles at 0.5 C with an average Coulombic efficiency of 99.5%;moreover,a high initial Coulombic efficiency of 90.2% is achieved.Significantly,this work provides a novel strategy to address the poor interfacial adhesion between nano-Si and graphite,which can be applied to other nano-Si based composites anodes.     

Formation of interfacial nanodroplets through changes in solvent quality

We describe the formation of very thin interfacial oil droplets. The oil droplets are composed of decane and have the shape of a spherical cap. They are approximately 1-10 microm across and about 10-500 nm thick. We form these droplets by sequentially exposing a hydrophobic silicon wafer to two solutions of decane, where the second solvent is a poorer solvent than the first. We hypothesize that this method of decorating interfaces with droplets is quite general, and that the method may be useful for the controlled modification of interfaces. Inadvertent application of the method may lead to unanticipated properties of interfaces.     

Development of novel magnetic nano-carriers for high-performance affinity purification

We developed novel magnetic nano-carriers around 180 nm in diameter for affinity purification. Prepared magnetic nano-carriers possessed uniform core/shell/shell nano-structure composed of 40 nm magnetite particles/poly(styrene-co-glycidyl methacrylate (GMA))/polyGMA, which was constructed by admicellar polymerization. By utilizing relatively large 40 nm magnetite particles with large magnetization, the magnetic nano-carriers could show good response to permanent magnet. Thanks to uniform polymer shell with high physical/chemical stability, the magnetic nano-carriers could disperse in a wide range of organic solvent without disruption of core/shell structure and could immobilize various kinds of drugs. We examined affinity purification using our prepared magnetic nano-carriers with anti-cancer agent methotrexate (MTX) as ligand. Our magnetic nano-carriers showed higher performance compared to commercially available magnetic beads in terms of purification efficiency of target including extent of non-specific binding protein.     

Development of silica-based stationary phases for high-performance liquid chromatography

Stationary phases are the basis of the development and application of high-performance liquid chromatography (HPLC). In this review we focused on the development of silica-based stationary phases, including the synthesis of silica gel and the application of silica in hydrophilic interaction chromatography (HILIC), reversed-phase liquid chromatography (RPLC), chiral separation chromatography, and ion chromatography. New stationary phases, advances in ionic liquid-modified silica, silica-based core-shell materials, and silica-based monolithic columns for HPLC are introduced separately.     

Development of small-molecule materials for high-performance organic solar cells

With the rapid development in recent years, small-molecule organic solar cell is challenging the dominance of its counterpart, polymer solar cell. The top power conversion efficiencies of both single and tandem solar cells based on small molecules have surpassed 9%. In this mini review, achievements of small molecules with impressive photovoltaic performance especially reported in the last two years were highlighted. The relationship between molecular structure and device performance was analyzed, which draws some rules for rational molecular design. Five series of p- and n-type small molecules were selected based on the consideration of their competitiveness of power conversion efficiencies.     

Design and fabrication of functional hydrogels through interfacial engineering

Hydrogels have drawn considerable attention in the past two decades due to their excellent biocompatibility and multi-stimuli responsiveness. They have a wide range of applications in the fields related to tissue engineering, sensors and biomedicine. Their applications are strongly influenced by the surface properties of hydrogels and the interfacial interactions between hydrogels and other substrates. In particular, the surface wettability and adhesion of hydrogels decide their applications as drug carriers and wound dressing materials. Nevertheless, there is a lack of systematic discussion on the surface functionalization strategies of hydrogels. Therefore, this review aims at summarizing the strategies of functionalizing the surfaces of hydrogels and bonding hydrogels with other solid substrates. It also explores the challenges and future perspectives of interfacial engineering of hydrogels.     

Characterizations of self-combustion reactions (SCR) for the production of nanomaterials used as advanced cathodes in Li-ion batteries

In this work, self-combustion reactions (SCR) for the preparation of important cathode materials for rechargeable Li-ion batteries were investigated by thermal analytical tools (DSC, ARC, TGA), electron microscopy, XRD, various spectroscopies (MS, Raman, FTIR) and elemental analysis by ICP. The systems studied include solutions containing metal nitrates at the right stoichiometry and sucrose as a fuel, for the preparation of LiMn_0.5Ni_0.5O₂ (layered), LiMn_1.5Ni_0.5O₄ (spinel), LiMn_0.33Ni_0.33Co_0.33O₂ (layered), and LiMn_0.4Ni_0.4Co_0.2O₂ (layered). Similar products, which do not depend on the atmosphere of the processes (air or inert) were obtained by spontaneous SCR and the gradual heating of the same solutions by DSC, ARC, and TGA. The reactions involve the partial caramelization of sucrose, complicated by red-ox reactions with the nitrates that form solid products, whose organic part is finally decomposed around 400 °C. The presence of cobalt ions has a stabilizing effect, which is expressed by the low dissolution rates of Li ions from the solid products thus formed, into aqueous solutions. The reaction mechanisms are discussed herein.     

Fabrication of wood-inspired high-performance composites through fermentation routes

In this paper, we developed a microbial route to fabricate wood-inspired biomimetic composites comparable to natural wood. Focusing on the chemical composition of woody biomass, we performed in situ bioprocessing of bacterial cellulose (BC) imbibed in modified cationic lignin (Catlig), which exhibited significant bioactivity in improving the microbial growth dynamics. The structural and morphological characteristics were enhanced by the formation of hydrophobic and electrostatic interactions between BC and Catlig during biosynthesis. Microbially derived BC/Catlig composites exhibited enhanced thermal stability and crystallinity, with oriented cellulose fibers. The tensile properties, toughness, and specific strength of BC/Catlig composites were comparable to those of a heavy wood species (Zelkova serrata) under hydrated conditions and synthetic soft materials.

Graphic abstract