Synthesis, charecterization and chelation ion-exchange studies of a resin copolymer derived from 8-hydroxyquinoline-formaldehyde-catechol

A chelating ion exchange resin was synthesized from 8-hydroxyquinoline and catechol using formaldehyde as a cross linking agent at 120 ± 2 °C in DMF solution. The resin was characterized by FTIR and elemental analysis. The morphology of the synthesized resin was studied by optical photograph and scanning electron microscopy (SEM). Various kinetic parameters such as energy of activation (E_a), enthalpy of activation (H?), entropy of activation (S?), free energy of activation (G?), order of reaction (n) and pre-exponential factor (A) of various steps of thermal decomposition have been calculated from thermogravimertic results. The physico-chemical properties of the resin have been studied. The total cation exchange capacity was measured and effect of pH and metal ion concentration on ion exchange capacity were studied. The rate of cation exchange reactions and distribution coefficient values in tartaric acid media at different pH were also studied using batch equilibration method.     

Online measurement of thermal diffusivity during cure of an epoxy composite

Thermal diffusivity was measured online during cure of an epoxy composite using a method somewhat similar to the Ångström Method. It is shown that a simple experimental setup can be used, thus avoiding expensive instrumentation. The experimental instrumentation is explained in detail. The measurements show an increase of thermal diffusivity during the cure of composite material. Using modulated differential scanning calorimetry (MDSC), heat capacity was measured online during the cure of an epoxy composite. Combining thermal diffusivity measurements with MDSC measurements, the thermal conductivity was found to change during the cure process, similar to the measurements of heat capacity. These changes are referred to vitrification at the end of the cure process.     

In-depth analysis of the mathematical model of polyester thermosets curing

In many areas of chemical engineering applications we have to deal with thermosetting polymer structures. One of the major processing techniques for producing such structures is the curing process. This process may be accompanied by undesirable thermal spiking phenomena during which the released energy may be trapped inside the structure. In order to predict the onset of this phenomenon models that couple reaction kinetics and heat transfer are required. The numerical model was constructed by taking into account the heat transferred by conduction through the resin, as well as the kinetics of heat generated by the cure reaction. The contributions to the rise in temperature from heat conduction and chemical reactions are different in different parts of the composite, which can be explained by the temperature–time, or conversion-time histories. The temperatures were measured in the center of a cylindrically shaped mold. Initiator concentration varied from 0.5% to 2.0% of mass fraction throughout the experiments, which governed the reaction kinetics. Introduction of the carbon base filler reduced the amount of heat generated in the composite, and as a result lowered the temperatures of the resin. The analysis of parameter sensitivity and model simulation was performed with data obtained. A good agreement was observed between experimental data and the mathematical model of the curing process in the mold.     

Mechanism Studies on Water Sorption and Permeation in Epoxy Resin by Impedance Spectroscopy. II. Cure Kinetics of O-Cresol Novolac Resin with Esterfied Phenol Novolac Resin

Abstract

To study the effect of water affinity of the cured epoxy resin on water sorption and permeation in the cured epoxy resin, a novel hardener (esterfied phenol novolac was synthesized and used for obtaining the cured product without free hydroxyl group. Differential Scanning Calorimetry (DSC) and Fourier Transform Infrared Spectroscopy (FT-IR) were used to study the cure kinetics of o-cresol novolac epoxy resin using esterfied phenol novolac resin as curing agent in the presence of 2-methylimidazole as accelerator. Some kinetic parameters of the curing reaction such as the reaction order, activation energy, and frequency factor were obtained in the temperature range studied. The results show that this curing process is a first-order kinetic mechanism, which was different with that cured with phenol novolac resin.     

A systematic study of the microwave and thermal cure kinetics of the DGEBA/DDS and DGEBA/DDM epoxy‐amine resin systems

The microwave and thermal cure processes for the epoxy-amine systems (epoxy resin diglycidyl ether of bisphenol A, DGEBA) with 4,4′-diaminodiphenyl sulphone (DDS) and 4,4′-diaminodiphenyl methane (DDM) have been investigated for 1 : 1 stoichiometries by using fiber-optic FT-NIR spectroscopy. The DGEBA used was in the form of Ciba-Geigy GY260 resin. The DDM system was studied at a single cure temperature of 373 K and a single stoichiometry of 20.94 wt% and the DDS system was studied at a stoichiometry of 24.9 wt% and a range of temperatures between 393 and 443 K. The best values of the kinetic rate parameters for the consumption of amines have been determined by a least squares curve fit to a model for epoxy/amine cure. The activation energies for the polymerization of the DGEBA/DDS system were determined for both cure processes and found to be 66 and 69 kJ mol⁻¹ for the microwave and thermal cure processes, respectively. No evidence was found for any specific effect of the microwave radiation on the rate parameters, and the systems were both found to be characterized by a negative substitution effect. Copyright © 2002 John Wiley & Sons, Ltd.     

Sensitivity analysis of a predictive model for the fire behaviour of a sandwich panel

A sensitivity analysis to assumptions and input variables is carried out for a predictive model previously developed [1] for the fire response of a glass-fibre/polyester panel and a glass-fibre/polyester-Vermiculux sandwich. It is an unsteady, one-dimensional model using the porous medium approximation and a constant gas pressure with two-step, finite rate kinetics for the thermal decomposition and combustion of the polymeric resin, moisture evaporation described by an Arrhenius rate law, heat and mass transfer by convection, heat conduction and radiation described by effective thermal conductivities, variation of the volumetric fractions of the polymeric resin and the moisture with the conversion degree, effective specific heats, external heat transfer resistances and surface ablation. The strongest impact on the model predictions is exerted by the imposed external heat flux with variations on the characteristic process times between 49 and 774%. An important role in sample heating/conversion is also played by surface ablation and/or external heat transfer resistance with variations up to 30-72% or, when ablation is disregarded, with temperatures along the core layer well below those of the degrading skin. These are also significantly affected by surface heat losses, with the assumption of adiabatic bottom surface leading to heterogeneous ignition of the lower skin, and evaporation of moisture with variations in the characteristic times up to 35%. The model for the effective thermal conductivity of the fibre-reinforced skin (the Parallel, the Maxwell-Eucken and the Effective Medium Theory models versus the Series model) is also important resulting in characteristic time variations up to 35%. The absence of local thermal equilibrium between the condensed and the gas/vapour phase and the kinetic details of the polymer reactions are comparatively less important (maximum diminution in the characteristic times of 16%). Moreover, although over-pressures, modelled by the Darcy law, become quite high especially during the moisture evaporation stage (up to ten times the atmospheric value), their effects on the thermal response of the structure are completely negligible when structural changes are not modelled. Finally, a sensitivity analysis is also carried out to input parameters.     

Thermodynamic properties and thermal stability of the synthetic zinc formate dihydrate

Zinc formate dihydrate has been synthesized and characterized by powder X-ray diffraction, elemental analysis, FTIR spectra and thermal analysis. The molar heat capacity of the coordination compound was measured by a temperature modulated differential scanning calorimetry (TMDSC) over the temperature range from 200 to 330 K for the first time. The thermodynamic parameters such as entropy and enthalpy vs. 298.15 K based on the above molar heat capacity were calculated. The thermal decomposition characteristics of this compound were investigated by thermogravimetric analysis (TG) and differential scanning calorimetry (DSC). TG curve showed that the thermal decomposition occurred in two stages. The first step was the dehydration process of the coordination compound, and the second step corresponded to the decomposition of the anhydrous zinc formate. The apparent activation energy of the dehydration step of the compound was calculated by the Kissinger method using experimental data of TG analysis. There are three sharply endothermic peaks in the temperature range from 300 to 650 K in DSC curve.     

Thermal curing behavior of MWCNT modified vinyl ester‐polyester resin suspensions prepared with 3‐roll milling technique

This study aims to investigate the curing behavior of a vinyl ester‐polyester resin suspensions containing 0.3 wt % of multiwalled carbon nanotubes with and without amine functional groups (MWCNTs and MWCNT‐NH₂). For this purpose, various analytical techniques, including Differential Scanning Calorimetry (DSC), Fourier infrared spectroscopy (FTIR), Raman Spectroscopy, and Thermo Gravimetric Analyzer (TGA) were conducted. The resin suspensions with carbon nanotubes (CNTs) were prepared via 3‐roll milling technique. DSC measurements showed that resin suspensions containing CNTs exhibited higher heat of cure (Q), besides lower activation energy (E_a) when compared with neat resin. For the sake of simplicity of interpretation, FTIR investigations were performed on neat vinyl ester resin suspensions containing the same amount of CNTs as resin. As a result, the individual fractional conversion rates of styrene and vinyl ester were interestingly found to be altered dependent on MWCNTs and MWCNT‐NH₂. The findings obtained from RS measurements of the cured samples are highly proportional to those obtained from FTIR measurements. TGA measurements revealed that CNT modified nanocomposites have higher activation energy of degradation (E_d) compared with the cured polymer. The findings obtained revealed that CNTs with and without amine functional groups alter overall thermal curing response of the surrounding matrix resin, which may probably impart distinctive characteristics to mechanical behavior of the corresponding nanocomposites achieved. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1511–1522, 2009     

Chemical shrinkage and thermomechanical characterization of an epoxy resin during cure by a novel in situ measurement method

In this study, a novel technique is presented to enable the characterization of the dimensional changes and evolution of mechanical properties of a resin during cure. This is achieved using an innovative in situ device called thermal flux cell combined with a Dynamical Mechanical thermal Analyser (DMA). With this system, it is now possible to eliminate the sources of error induced while combining two or more instruments. This device consists into a mold containing the resin where the upper and lower surfaces acting as heat flux sensors. Changes in temperature and thermal flux are directly monitored as well as the dynamical displacement and the stiffness during the curing process. In this work, an epoxy DGEBA resin was used to demonstrate the innovative approach. The tested resin was characterized using different vibration frequencies and amplitudes of the DMA. The results were then processed in order to provide accurate data on gel time and cure kinetics behavior. The volume and mechanical changes were also derived from experimental data and linked to the degree of cure. Chemo and thermo-mechanical models were created to predict the changes in chemical shrinkage and stiffness during cure.     

Thermal Energy Storage and Heat Transfer of Nano-Enhanced Phase Change Material (NePCM) in a Shell and Tube Thermal Energy Storage (TES) Unit with a Partial Layer of Eccentric Copper Foam

Thermal energy storage units conventionally have the drawback of slow charging response. Thus, heat transfer enhancement techniques are required to reduce charging time. Using nanoadditives is a promising approach to enhance the heat transfer and energy storage response time of materials that store heat by undergoing a reversible phase change, so-called phase change materials. In the present study, a combination of such materials enhanced with the addition of nanometer-scale graphene oxide particles (called nano-enhanced phase change materials) and a layer of a copper foam is proposed to improve the thermal performance of a shell-and-tube latent heat thermal energy storage (LHTES) unit filled with capric acid. Both graphene oxide and copper nanoparticles were tested as the nanometer-scale additives. A geometrically nonuniform layer of copper foam was placed over the hot tube inside the unit. The metal foam layer can improve heat transfer with an increase of the composite thermal conductivity. However, it suppressed the natural convection flows and could reduce heat transfer in the molten regions. Thus, a metal foam layer with a nonuniform shape can maximize thermal conductivity in conduction-dominant regions and minimize its adverse impacts on natural convection flows. The heat transfer was modeled using partial differential equations for conservations of momentum and heat. The finite element method was used to solve the partial differential equations. A backward differential formula was used to control the accuracy and convergence of the solution automatically. Mesh adaptation was applied to increase the mesh resolution at the interface between phases and improve the quality and stability of the solution. The impact of the eccentricity and porosity of the metal foam layer and the volume fraction of nanoparticles on the energy storage and the thermal performance of the LHTES unit was addressed. The layer of the metal foam notably improves the response time of the LHTES unit, and a 10% eccentricity of the porous layer toward the bottom improved the response time of the LHTES unit by 50%. The presence of nanoadditives could reduce the response time (melting time) of the LHTES unit by 12%, and copper nanoparticles were slightly better than graphene oxide particles in terms of heat transfer enhancement. The design parameters of the eccentricity, porosity, and volume fraction of nanoparticles had minimal impact on the thermal energy storage capacity of the LHTES unit, while their impact on the melting time (response time) was significant. Thus, a combination of the enhancement method could practically reduce the thermal charging time of an LHTES unit without a significant increase in its size.     

Carbon isotopic composition effects on interatomic interactions and the properties of diamond

The interatomic interaction potential parameters were determined for ¹²C and ¹³C in diamond. The results were used to obtain the isotopic dependences of such diamond properties as the Debye temperature, molar heat capacity, thermal expansion coefficient, energies of vacancy formation and self-diffusion, surface energy, and longitudinal velocity of sound. The isotopic dependence of isochoric heat capacity disappeared as the temperature increased. Sign inversion was observed for the isotopic dependence of the thermal expansion coefficient at a certain temperature: its growth changed into a drop. This approach was also used to estimate changes in the interatomic interaction potential and crystal bulk compression modulus of lithium in going from ⁷Li to ⁶Li. The isotopic dependences of phase transition parameters and the whole p-T phase diagram of a simple substance were predicted.     

Rheokinetic cure characterization of epoxy–anhydride polymer system with shape memory characteristics

An epoxy resin capable of exhibiting shape memory property was derived by curing diglycidyl ether of bisphenol A (DGEBA) with a blend of carboxy telechelic poly(tetramethyleneoxide) (PTAC) and pyromellitic dianhydride (PMDA). The cure kinetics of DGEBA/PTAC/PMDA blend of varying compositions was investigated using isothermal rheological analysis. The overall reaction conformed to a second-order autocatalytic model. The kinetic parameters including reaction order, kinetic constants and activation energy were determined. The results showed that increase of PTAC decreased the overall activation energy and frequency factor of the cure reaction. This effect resulted in a diminution of the overall rate of curing. The catalysis by PTAC has its origin from the activation of epoxy groups by the protons of the COOH groups. The autocatalysis was caused by the COOH groups generated by the reaction of alcohol groups with anhydride. The activation energy for the autocatalysis was more than that for the primary reaction as the COOH groups responsible for autocatalysis were generated on a sterically hindered polymer backbone. The kinetics helped generate a master equation conforming to second-order autocatalytic model that could predict the cure profile of a specified resin system at a given temperature, leading to cure optimization.     

酸酐固化环氧树脂/蒙脱土复合材料的等温固化动力学

用等温差示扫描量热法(DSC)研究了酸酐固化环氧树脂/蒙脱土复合材料的等温固化过程，考察了未处理的蒙脱土(MMT)和有机蒙脱土(OMMT)对环氧树脂固化动力学的影响. 实验表明， 环氧树脂的固化过程包含自催化机理，加入蒙脱土没有改变固化反应机理. 用Kamal方程对该体系的固化过程进行拟合，得到反应级数m、n，反应速率常数k1、k2，总反应级数(m + n)在2.4～3.0之间. MMT的加入使环氧树脂体系的k1、k2有所降低，而OMMT的加入对体系的k1、k2影响较为复杂，加入蒙脱土对环氧树脂固化体系的活化能影响较小.     

First-principles study of the phonon vibrational spectra and thermal properties of hexagonal MoS2

The phonon spectra and thermal properties of the hexagonal MoS₂ are investigated by using first-principles calculations within the density functional theory (DFT). Finite displacement method is used to calculate the phonon vibrational spectra and phonon density of states. The vibrational modes at the Gamma point are analyzed by using group theory. The temperature and pressure dependence of its thermal quantities such as the thermal expansion, the heat capacity at constant volume, the Gibbs energy and entropy are obtained based on the quasi-harmonic approximation (QHA). Our results show that both the thermal expansion coefficient α and the heat capacity C_V increase with T³ at low temperatures and gradually turn almost linear as the temperature increases. It is found that the entropy is sensitive to the temperature while the Gibbs free energy is more sensitive to the pressure change.     

环氧树脂/氧化石墨纳米复合物的等温固化行为研究

用示差扫描分析仪(DSC)研究了氧化石墨(GO)对N,N,N',N'-四缩水甘油基-4,4'-二氨基二苯基甲烷环氧树脂(TGDDM)/4,4'-二氨基二苯基砜(DDS)体系的等温固化反应的影响,用X射线光电子能谱仪(XPS)和傅里叶变换红外光谱仪(FTIR)研究了GO上存在的官能团及其对TGDDM/DDS体系固化行为的影响,用热失重分析仪(TGA)研究了天然石墨和GO的热力学稳定性.XPS、FTIR和TGA结果表明,GO上存在的大量羟基、羧基、环氧基等官能团能够影响环氧树脂的固化行为.DSC研究发现,环氧树脂/氧化石墨纳米复合物的固化反应属于自催化类型,随着GO含量的增加,达到最大反应速率的时间不断减小,初始反应速率不断增大,这说明GO对环氧树脂的固化反应有促进作用.Kamal模型计算得到的结果表明,随着GO含量的增加自催化反应初期阶段表观活化能E1先减小再增大,而自催化反应结束后表观活化能E2略微减小.经Kamal模型扩散控制函数修正后,整个固化过程中拟合得到的结果与实验数据相当吻合.以上结果说明,少量的GO对TGDDM/DDS体系的固化反应起着催化作用.     

芳基磺盐对不同类型环氧化合物的固化行为

通过 DSC法研究了 LEPB、双酚 A型环氧树脂 E-51和 TDE-85型环氧树脂与四种芳基碘钅翁盐的热固化行为及反应活化能。结果发现 ,双酚 A型环氧树脂固化反应的活化能较高 ,而 TDE-85的放热较集中。同时发现与酸酐固化剂相对照 ,本文中使用的 LEPB—固化剂体系的活化能 (78.66～ 1 0 2 .5k J· mol-1)普遍高于LEPB酸酐体系的活化能 (69.0 4～ 75.1 0 k J·mol-1)。     

Diagnosis of Phase Shift in a Temperature-Modulated Calorimetric Method

In a temperature-modulated calorimetric method using the same apparatus as a standard differential scanning calorimeter, we have to pay attention to the thermophysical parameters of the apparatus, which cause phase shift in ac temperatures, such as heat capacity of base plate, heat capacity of a pan, thermal conductance between a heater and base plate, and thermal conductance between a pan and base plate. We performed the analysis of the thermal system of the apparatus with these parameters. Beside the theoretical consideration, we carried out heat capacity measurement in a wide range of modulation periods. We found that the experimental results were well-expressed in terms of these thermophysical parameters. This revised version was published online in July 2006 with corrections to the Cover Date.     

Effect of Coriolis and buoyancy forces on three-dimensional flow of chemically reactive tangent hyperbolic fluid subject to variable viscosity

Thermophoresis effect has wide range of applications in electro-static precipitators and in biology for calculating single biological macro molecules, such as genomic-length DNA and HIV virus in the micro channels. Current study deal with effects of Coriolis and buoyancy forces on the three-dimensional boundary layer flow of tangent hyperbolic fluid with thermo-migration and haphazard motion of nano-sized particles. Arrhenius kind of chemical reaction is taken along an exponentially stretchable surface. The main focus of current exploration is to execute shear thinning nano-liquid flow past an exponentially rotating stretchable surface under the influence of variable viscosity, mixed convection and activation energy. We are motivated to explore the features of three-dimensional shear thinning model combined under the features of mixed convention, variable viscosity, and activation energy. The mathematical model is designed to generate PDEs and converted them into ODEs by employing fractious transformation. The numerical outcomes are exhibited via graphs by employing Bvp4c numerical technique whereas the values of skin friction coefficient are calculated by monopolizing shooting method. Characteristics of the parameters appearing in modeling like the viscosity parameter, power-law index, local Weissenberg number, mix convection parameter, rotation parameter, Prandtl number and chemical reaction parameter are comprehensively analyzed through graphical behavior. The impact of governing parameters on skin friction, heat and mass transfer rates is illustrated through tables. The detail analysis anticipates that the elevation in Weissenberg number and porosity caused decline in velocity. Further, the temperature behaves doppositely analogous to development Prandtl besides the thermophoresis parameter.     

Simultaneous imbibition-heat convection process in a non-Darcian porous medium

In the present work, the nonisothermal imbibition process in a porous medium was numerically analyzed using a non-Darcian model for the momentum equation and energy equations for the wetting and dry zones. In order to show the thermal character of the problem, we assume initially that the porous medium is found at a uniform temperature T0 and suddenly begins the imbibition process into the porous medium with a penetrating fluid at temperature T1. The physical influence of nondimensional parameters such as Peclet number, Pe, effective heat capacity number, beta(w), porous Reynolds number, Re(p), and the inertial coefficient of the porous medium, F, serve us to evaluate the position and velocity of the imbibition front as well as temperature profiles in both zones. In particular, for values of Re(p)F/beta(w)>1, we recover a type of nonisothermal Washburn law. The numerical predictions show that the imbibition front and the temperature fields strongly depend on the above nondimensional parameters, revealing a clear deviation of the simple Washburn law.     

Effect of thermal decomposition processes on the thermal properties of carbon fiber reinforced cement composites in high-temperature range

Thermal conductivity, specific heat capacity, thermal diffusivity and linear thermal expansion coefficient of two types of carbon fiber reinforced cement composites are measured in the temperature range up to 800°C. Thermal conductivity and thermal diffusivity are also determined for the specimens exposed to thermal load up to 800°C before the measurement. Differential thermal analysis (DTA), mercury intrusion porosimetry (MIP), scanning electron microscopy (SEM) and X-ray diffraction analysis (XRD) are utilized for the assessment of thermal decomposition processes taking place in the high temperature range under consideration. The high temperature thermal properties of the studied materials are found to be positively affected by the application of the high alumina cement and in the case of the Portland cement based composite also by using the autoclaving procedure in the production process. Also, the randomly distributed carbon fibers that can reduce the damage of the pore structure by the thermal decomposition processes are identified as a positive factor in this respect. A comparison of thermal conductivity vs. temperature curves obtained for the specimens pre-heated to different temperatures is found to be a useful tool in the identification of major dynamic effects in the specimens due to the thermal decomposition reactions. The results are in a good agreement with the DTA, MIP, SEM and XRD analyses. The character of the thermal conductivity measurements that in fact includes the effects of convection and radiation into the thermal conductivity coefficient can be beneficial for a simple assessment of the influence of the fire on a dividing structure.