Chelating properties of bis(8-hydroxy-2-methyl-5-quinolyl)methane

A new chelating reagent, bis(8-hydroxy-2-methyl-5-quinolyl) methane, has been prepared and characterized. It does not react with aluminum but does chelate with many other metals. Analytical data did not permit a decision on the possibility that some of these chelates arc polymeric.     

Co-ordination compounds of glyoxal bis(dimethylhydrazone)

Complexes derived from glyoxal bis(dimethylhydrazone) (GDMH) have been prepared and characterised; they are of the general types MX₂(GDMH) (M  Co, Zn, Cd; X  Cl, Br and M  Zn, X  SCN) and MX₂(GDMH)₂ (M  Co, Ni; X  SCN). In all the complexes the ligand is chelating;MX₂(GDMH) are tetrahedral monomers while MX₂(GDMH)₂ contain six co-ordinated metal atoms. The ligand is monoprotonated in mineral acids and the salts [GDMH₂][CoBr₄] and [GDMH₂]PdBr₄ have been isolated from acidic solution.     

Synthesis of 8-demethyl-8-hydroxy-5-deazariboflavins

1-Deoxy 1-(3,4-dihydro-8-hydroxy-2,4-dioxopyrimido[4,5-b]quinolin-10-(2H)-yl)-D-ribitol (7,8-didemethyl-8-hydroxy-5-deazariboflavin), the flavin moiety of Methanobacterium coenzyme F₄₂₀, and its 7-methyl analog were prepared by acid-catalyzed reaction of appropriately substituted 6-(N-D-ribitylanilino)uracils with trimethyl or triethyl orthoformate followed by deprotection.     

Spectrophotometric determination of iron with bis(2-hydroxymethyl-5-hydroxy-4-pyrone-6)ketone

Summary A method has been developed for the direct spectrophotometric determination of iron by using the reddish-orange coloured complex formed in the interaction of iron with bis(2-hydroxymethyl-5-hydroxy-4-pyrone-6)ketone. The red colour follows Beer's Law and is stable. The method is sensitive, reproducible and accurate. Of the several anions and cations studied, only a few interfered seriously in the determination of iron. However, the ones that do interfere seriously can be separated by conventional methods of separation.

---

Zusammenfassung Zur direkten spektrophotometrischen Eisenbestimmung wird der rötlich-orange gefärbte Komplex benutzt, der sich aus Eisen und Bis(2-hydroxymethyl-5-hydroxy-4-pyron-6)keton bildet. Die Färbung befolgt das Beersche Gesetz und ist beständig. Das Verfahren ist empfindlich und liefert genaue und reproduzierbare Ergebnisse. Die wenigen Ionen, die erhebliche Störungen verursachen, können zuvor nach üblichen Verfahren abgetrennt werden.

     

Bis(2-hydroxy-3-t-butyl-5-methylphenyl) sulphide,sulphoxide and sulphone as antioxidants for polypropylene

The title compounds were examined as antioxidants for polypropylene in oven-ageing studies. It was shown that the activity was in the order sulphoxide > sulphide > sulphone. This activity is justified by the mechanisms that have been proposed for stabilisation by phenolic sulphur compounds.     

Antioxidative and 5-lipoxygenase inhibiting activities of novel bis(4-hydroxy-2,3,5-trimethylphenoxy)alkyl derivatives

Novel bis(4-hydroxy-2,3,5-trimethylphenoxy)alkyl derivatives were synthesized and evaluations were made of their inhibiting action on Fe3+-ADP induced lipid peroxidation in rat liver microsome and reducing action on alpha,alpha-diphenyl-beta-picrilhydrazyl (DPPH), a stable radical, in addition to their inhibiting action on 5-lipoxygenase (5-LO), an enzyme that synthesizes leukotrienes. We performed a structure-activity correlation study on these derivatives. A strong Fe3+-ADP induced lipid peroxidation preventing activity was observed for the derivatives with an odd number of methylene groups including 1,3-bis(4-hydroxy-2,3,5-trimethylphenoxy)propane (3b) and 3a. No change in the DPPH reducing activity was found with change in the number of methylene groups. 5-LO inhibiting activity among the derivatives was the highest for 1,6-bis(4-hydroxy-2,3,5-trimethylphenoxy)hexane (3e). MM2 calculations were performed to find a stable steric structure for the derivatives, and 1,5-bis(4-hydroxy-2,3,5-trimethylphenoxy)pentane (3d) showed a strong activity in both antioxidative action and 5-LO inhibiting action.     

Complex formation of gallium(III) with 8-hydroxy-7-iodoquinoline-5-sulphonic acid (ferron)

The complex formation of gallium(III) with 8-hydroxy-7-iodoquinoline-5-sulphonic acid (ferron) (L) was studied by potentiometry; and the dissociation constants of the ligand were redetermined. A new computer program made it possible to make allowance for a considerable number of equilibria. In the pH range 2–10, the main species were as follows (the logarithm of the absolute stability constants at 25.0 ±0.1° for ionic strength 0.1 M are given in parentheses): GaHL (11.3), GaL (14.7), Ga(OH)₂L (32.3), GaL₂ (23.9), GaOHL₂ (31.0) and GaL₃ (29.6). For 1:1, 1:2 and 1:3 mixtures of metal with ferron, the mole fractions of the various complexes as a function of pH were calculated; the effect of pH on the conditional constants of the species GaL, GaL₂ and GaL₃ was also established.     

Functional polymers. XIV. Grafting of 2(2-hydroxy-5-vinylphenyl)2H-benzotriazole onto polymers with aliphatic groups

Successful grafting of 2(2-hydroxy-5-vinylphenyl)2H-benzotriazole onto saturated aliphatic C? H groups of polymers has been accomplished. When the grafting reaction was carried out in chlorobenzene at 150–160°C with di-tertiary butylperoxide as the grafting initiator, grafts as high as 20–30% at grafting efficiencies of 50 and 80% have readily been obtained. It was very important to carry out the grafting reaction in tubes sealed under high vacuum since trace amounts of oxygen cause complete inhibition of the grafting reaction by the phenolic monomer. Grafting reactions were carried out on a variety of different polymers including atactic polypropylene, ethylene/vinyl acetate copolymer, poly(methyl methacrylate), poly(butyl acrylate), and polycarbonate.     

Wetting properties of bis(trifluoromethyl)carbinyl acrylate polymers

A series of bis(trifluoromethyl)carbinyl acrylate monomers [Y-C(CF₃)₂ O? CO? CH?CH₂] in which Y is CH₃, CH₃CH₂, CH₃CH₂CH₂, CH₃CH₂CH₂CH₂, C₆H₅, H, F, CF₃, N₃, CN, and CH₃OCH₂CH₂O, was prepared. Polymers were easily prepared from all of these monomers except where Y = CN, wherein a variety of initiation methods failed to produce high molecular polymer. Wettabilities of the polymer films were examined by means of contact angle measurements by using n-alkane test liquids and water. Values of the dispersion force contribution (γs^d) and the polar force contribution (γs^p) to the solid surface energy were calculated by employing both geometric and harmonic mean approximations. Values of γs^d calculated by either method agreed well with γ_c (critical surface tension) values determined graphically from contact angle data employing n-alkane test liquids, confirming the suggestion that γ_c is an approximate measure of the dispersion force contribution to solid surface energy. Values of γs_d ranged from 15 dyne/cm (Y = F or CF₃) to 25 dyne/cm (Y = C₆H₅). Values of the polar force contribution to solid surface energy (γs^p) varied from 0.6 dyne/cm (Y = CH₃CH₂CH₂CH₂) to 3.4 dyne/cm (Y = CH₃OCH₂CH₂O) when calculated by the geometric mean equation. The values of γs^p obtained from the harmonic mean equation followed the same trend upon varying substituents, but were larger in value, ranging from 2.9 dyne/cm (Y = CH₃CH₂CH₂CH₂) to 7.5 dyne/cm (Y γ CH₃OCH₂CH₂O).     

1-Methyl-2-[2-(8-hydroxy-5-chinolyl)vinyl]-8-hydroxychinoliniumchlorid

Ohne Zusammenfassung     

(8R,8aS)-及(8R,8aR)-8-羟基-5-吲哚里西啶酮的不对称合成:两个有用的羟基吲哚里西啶合成砌块

以3-苄氧基哌啶-2,6-二酮衍生物20为起始原料,分别合成了两类新的合成砌块(8R,8aS)-及(8R,8aR)-8-羟基-5-吲哚里西啶酮19a/19b和15a/15b.19a/19b的合成是基于反式非对映立体选择性还原烷基化反应(dr=93:7),接着经4步转化而成;而化合物15a/15b的制备则以双烯29的RCM反应为关键步骤,再经顺式立体选择性催化氢化(dr=91:9)反应完成.此外,还原化合物15a得到了(8R,8aR)-8-羟基-5-吲哚里西啶18.     

Synthesis and desilylation of some bis(trimethylsilyl)alkenes and polymers bearing bis(silyl)alkenyl groups

The synthesis of various vinylbis(silanes) from some aryl and heteroaryl aldehydes and (Me₃Si)₃CLi in Et₂O is described. Friedel-Crafts reaction of 1,1-bis(trimethylsilyl)-2-(2-naphthyl)ethene with various acyl chlorides (RCOCl, R = Me, Et, i-Pr, i-Bu, n-pent) gave the corresponding α-silyl-α,β-unsaturated enones with high E steroselectivity. Moreover, poly(styrene)-co-[2,2-bis(trimethylsilyl)ethenyl(styrene)] obtained via the reaction of polymers bearing pendant enone functions and (Me₃Si)₃CLi, reacts with the same acyl chlorides in the presence of catalytic amount of AlCl₃ to give the new macromolecules bearing α-silyl-α,β-unsaturated enones and α,β-unsaturated enones.     

Functional polymers. XVI. Synthesis and polymerization of 2(2-hydroxy-5-isopropenylphenyl)-2H-benzotriazole and a new synthesis of 2(2-hydroxy-5-vinylphenyl)2H-benzotriazole

2(2-Hydroxy-5-isopropenylphenyl)2H-benzotriazole was synthesized in 40% overall yield starting from o-nitroaniline. Diazotization in aqueous hydrochloric acid gave o-nitrophenyl diazonium chloride which was condensed with p-hydroxyacetophenone; the azo compound was reduced to 2(2-hydroxy-5-acetylphenyl) 2H-benzotriazole with zinc powder in sodium hydroxide solution and the 2-hydroxy group of the compound was acetylated. Treatment of the acetyl compound with methyl Grignard reagent resulted in the methylation of the 5-acetyl group to 2[2-acetoxy-5(2-hydroxy-2-propyl)phenyl]2H-benzotriazole which was then dehydrated with potassium hydrogen sulfate to the desired 2(2-hydroxy-5-isopropenylphenyl)2H-benzotriazole. This monomer did not homopolymerize, but was copolymerized readily with styrene, methyl methacrylate, and n-butyl acrylate with azobisisobutyronitrile as the initiator. 2(2-Acetoxy-5-acetylphenyl)2H-benzotriazole was also reduced with sodium borohydride to form 2[2-acetoxy-5-(1-hydroxyethyl)phenyl]2H-benzotriazole which was dehydrated and hydrolyzed to the known 2(2-hydroxy-5-vinylphenyl)-2H-benzotriazole. This route provides a novel and simpler synthesis of 2(2-hydroxy-5-vinylphenyl)2H-benzotriazole.     

Synthesis of (+)-(R)-5-hydroxy-6-hydroxymethyl-7-methoxy-8-methylflavanone

The synthesis of (+)-(R)-5-hydroxy-6-hydroxymethyl-7-methoxy-8-methylflavanone is described. A new chromylation method of β-ketosulfoxide 9 leading to the Michael acceptor 12 has been developed. Dilithium tetrachlorocuprate was shown to be a very efficient catalyst for the conjugate addition reaction of phenyl magnesium bromide to the α,β-unsaturated sulfoxide 12. The instability of the obtained adducts 10 represents a limitation in terms of yield. It was confirmed that the natural flavanone leridol does not possess the structure of title compound 1.