Summary: The complexation between polystyrene‐block‐poly(acrylic acid) (PS‐b‐PAA) micelles and poly(ethylene glycol)‐block‐poly(4‐vinyl pyridine) (PEG‐b‐P4VP) is studied, and a facile strategy is proposed to prepare core‐shell‐corona micellar complexes. Micellization of PS‐b‐PAA in ethanol forms spherical core‐shell micelles with PS block as core and PAA block as shell. When PEG‐b‐P4VP is added into the core‐shell micellar solution, the P4VP block is absorbed into the core‐shell micelles to form spherical core‐shell‐corona micellar complexes with the PS block as core, the combined PAA/P4VP blocks as shell and the PEG block as corona. A model is suggested to characterize the core‐shell‐corona micellar complexes.
Schematic formation of core‐shell‐corona (CSC) micellar complexes by adsorption of PEG‐b‐P4VP into core‐shell PS‐b‐PAA micelles. 相似文献
The micellar behavior of PS-b-PDMS, PS-b-PDMS-b-PS linear block and (PS)2(PDMS) miktoarm star copolymers of polystyrene (PS) and polydimethylsiloxane (PDMS) is investigated in DMF, a selective solvent for PS. The linear PS-b-PDMS and star (PS)2(PDMS) copolymers exhibit different macromolecular architectures but similar compositions and total molecular weight, while the linear PS-b-PDMS-b-PS copolymer has the same composition as the diblock and miktoarm star but double their molecular weight. Static, dynamic light scattering and viscometry were used for the structural characterization of the micelles. Aggregation numbers were found to increase in the order PS-b-PDMS-b-PS < (PS)2(PDMS) < PS-b-PDMS. The corona thickness was dependent on the molecular weight of the soluble PS chains. In the case of (PS)2(PDMS), although the core area per PS chain, AC, was significantly lower than that of the linear copolymers, the coronal chains were not significantly stretched. This can be attributed to the stiff nature of the PS chains, which maintains the elongated form of the chains. 相似文献
The effect of increasing concentration of each of three polar solvents [0–40 % (v/v) 1,4-dioxane, 0–40 % (v/v) dimethyl sulfoxide (DMSO), and 0–60 % (v/v) N,N-dimethylformamide (DMF)] on changes in the shape of the surfactant polysorbate 20 (Tween 20) micelles in the aqueous, polar solvent, sodium phosphate buffer solutions (pH = 7.2, ionic strength 2.44 mmol·L?1) were investigated by using small-angle X-ray scattering. The effect of increasing concentration of 1,4-dioxane is that the micelle shape changed from core–shell cylindrical micelles to core–shell disc micelles between concentrations of 10 and 20 % (v/v) 1,4-dioxane, and then from core–shell disc micelles to core–shell elliptic disc micelles between concentrations of 30 and 40 % (v/v) 1,4-dioxane. The effect of increasing concentration of DMSO is that the micelles changed from core–shell cylindrical micelles to core–shell disc micelles between concentrations of 0 and 10 % (v/v) DMSO. The effect of increasing concentration of DMF is that it changed the core–shell cylindrical micelles to core–shell disc micelles between concentrations of 30 and 40 % (v/v) DMF. The common effect is that the solvents shortened the height of the micelle, that is, they squashed the micelle. Moreover, the specific effect of 1,4-dioxane is that this solvent squashed and squeezed the micelle. 相似文献
Thick poly(styrene-b-monomethoxydiethylenglycol-acrylate-b-styrene) [P(S-b-MDEGA-b-S)] films (thickness 5 μm) are prepared from different solvents on flexible substrates by solution casting and investigated with small-angle X-ray scattering. As the solvents are either PS- or PMDEGA-selective, micelles with different core-shell micellar structures are formed. In PMDEGA-selective solvents, the PS block is the core and PMDEGA is the shell, whereas in PS-selective solvents, the order is reversed. After exposing the films to liquid D2O, the micellar structure inside the films prepared from PMDEGA-selective solvents remains unchanged and only the PMDEGA (shell part) swells. On the contrary, in the films prepared from PS-selective solvents, the micelles revert the core and the shell. This reversal causes more entanglements of the PMDEGA chains between the micelles. Moreover, the thermal collapse transition of the PMDEGA block in liquid D2O is significantly broadened. Irrespective of the solvent used for film preparation, the swollen PMDEGA shell does not show a prominent shrinkage when passing the phase transition, and the transition process occurs via compaction. The collapsed micelles have a tendency to densely pack above the transition temperature. 相似文献
In this paper, we describe an efficiently physical method of electric-field-assisted assembly and alignment of block copolymer micelles. Amphiphilic block copolymer polystyrene-b-poly(acrylic acid) (PS-b-PAA) self-assembles into spherical micelles in water consisting of a core formed by the insoluble PS blocks and a shell formed by the soluble PAA blocks. When applying an alternating voltage to micelles solution dispersed onto a thin gap of coplanar metallic electrode, we generate directional arrays of highly ordered aggregates in long range. The formation of the ordered aggregates is due to the adjustment of interactions between micelles induced by dielectrophoretic forces in alternating electric field. The morphologies and arrays of particles become more regular with increasing of the strength and frequency of electric field. Voltage and frequency of the electric field and other parameters, such as particles concentration and, the viscosity and dielectric constant of the medium, affect the assembly process. 相似文献
Thermo-responsive polymeric micelles of poly (ethylene glycol)-b-poly(2-hydroxyethyl methacrylate-g-lactide)-b-poly(N-isopropylacrylamide) (PEG-P(HEMA-PLA)-PNIPAM) with core–shell–corona structure were fabricated for applications in controlled drug release. The graft copolymer of PEG-P(HEMA-PLA)-PNIPAM was self-assembled into core–shell micelles with a densely PLA core and mixed PEG/PNIPAM shells at 25 °C in aqueous media. By increasing the temperature above the lower critical solution temperature of PNIPAM, these core–shell micelles could be converted into core–shell–corona micelles because of the collapse of PNIPAM block on the PLA core as the inner shell and the soluble PEG block stretching outside as the outer corona. Anticancer drug doxorubicin (DOX) was loaded in the polymeric micelles as a model drug. Compared with polymeric micelles formed by liner PEG-b-PLA-b-PNIPAM triblock copolymer, these polymeric micelles exhibited higher loading capacity, and release of DOX from the polymeric micelles with core–shell–corona structure was well-controlled. 相似文献
Poly(styrene)-block-poly(4-vinylpyridine) (PS-b-P4VP) copolymers and poly(acrylic acid) (PAA) have been mixed in organic solvents. Complexation via hydrogen bonding occurs between the P4VP and PAA blocks. Those insoluble complexes aggregate to form the core of micelles surrounded by a corona of PS chains. Reorganization of these structures occurs upon addition of acidic or basic water, which results in the breaking of the hydrogen bonds between the P4VP and PAA blocks. After transfer of the initial complexes in acidic water, micelles consisting of a PS core and a protonated P4VP corona are observed. In basic water, well-defined nanoparticles formed by the PS-b-P4VP copolymers are obtained. It is demonstrated that these nanoparticles are stabilized by the negatively charged PAA chains. Finally, thermally induced disintegration of the micelles is investigated in organic solvents. 相似文献
We have studied the effect of polystyrene (PS) homopolymer addition on the morphology of self-assembled block copolymer micelles made from linear or cyclic poly(styrene-b-isoprene), PS-b-PI, in a selective solvent for the PI block (heptane). Both copolymers have the same composition: the degree of polymerization is 290 for the PS block, and 110 for the PI block, and we focused on the influence of the addition of small amounts of PS homopolymer on the micellar morphology. For the copolymer concentrations considered, the linear copolymer self-organizes into spherical micelles while the cyclic copolymer forms cylindrical micelles. PS and PI chains constitute the core and the corona of these micelles, respectively, due to the different affinity of the blocks for heptane. Consequently, the PS homopolymer added is "solubilized" into the micellar core. Dynamic light scattering (DLS) data combined with atomic force microscopy (AFM) results show that the addition of PS homopolymer induces a drastic change in the micellar organization. Indeed, a morphological transition, from spheres to cylinders for the linear copolymer, and from cylinders to vesicles for the cyclic copolymer, is observed. These results highlight the fact that a small incorporation of PS homopolymer is clearly sufficient to modify the morphology (size and shape) of the micelles. This approach could be a key parameter for the design/control of micelles for specific applications in nanotechnology. 相似文献
The local mobility and organization of micelles formed by the cationic diblock copolymer PS-poly(N-ethyl-4-vinylpyridinium bromide) in dilute aqueous solutions is studied by spin-probe ESR spectroscopy. Micelles composed
of a hydrophobic PS core and a lyophilizing polyelectrolyte corona are prepared by two methods: dialysis from a nonselective
solvent and direct dispersion of the diblock copolymer in water under long-term heating. Velocity-sedimentation studies and
static and dynamic light-scattering measurements show that the micelles obtained by dialysis have smaller mean hydrodynamic
sizes and weight-average molecular masses and are less polydisperse than micelles prepared by direct dispersion. The ESR spectra
of spin probes localized in micelles of both types are found to be identical. This finding suggests that their local structure
is independent of the dispersion procedure and molecular-mass characteristics. Probes are localized in the outer layer of
the PS core near the core/shell boundary, and their local mobility is a factor of ∼2 higher than the local mobility of probes
in the phase of the solid PS. It is inferred that the structure of the outer layer of the PS core in micelles is looser than
the structure of PS in the solid phase. The localization sites of spin probes are partially penetrated by water. 相似文献
Summary: Spherical micelles have been formed by mixing, in DMF, a poly(styrene)‐block‐poly(2‐vinylpyridine)‐block‐poly(ethylene oxide) (PS‐block‐P2VP‐block‐PEO) triblock copolymer with either poly(acrylic acid) (PAA) or a tapered triblock copolymer consisting of a PAA central block and PEO macromonomer‐based outer blocks. Noncovalent interactions between PAA and P2VP result in the micellar core while the outer corona contains both PS and PEO chains. Segregation of the coronal chains is observed when the tapered copolymer is used.
Inclusion of comb‐like chains with short PEO teeth in the corona triggers the nanophase segregation of PS and PEO as illustrated here (PS = polystyrene; PEO = poly(ethylene oxide)). 相似文献
We present a scattering study of a selectively deuterated micelle-forming diblock copolymer. The copolymer comprises a partially deuterated polystyrene (d,h-PS) block and an imidazolium-functionalized PS (IL) block. In toluene solutions, the copolymers assemble into elongated micelles where the IL block forms the micelle core. Through dynamic light scattering (DLS) measurements, we obtain the overall size of the micelles. In our small-angle neutron scattering (SANS) studies, we use contrast matching to characterize the IL core and the PS shell of the micelles independently. The PS block forming the micelle shell exhibits either a starlike or brushlike conformation depending upon the size of the core to which it is tethered. We find the IL block to be in an extended conformation, driving the formation of slightly elongated and relatively stiff micelle cores. The elongated micelle core cross-sectional radius and length depend linearly on the length of the IL block. We find that the micelles can sequester a few water molecules for each IL repeat unit; the addition of water slightly increases the cross section of the elongated micelles. 相似文献
In depth studies of the use of electron transfer reactions as a means to control the self-assembly of diblock copolymers with an electroactive metalloblock are reported. Specifically, the redox-triggered self-assembly of a series of polystyrene-block-polyferrocenylsilane (PS-b-PFS) diblock copolymers in dichloromethane solution is described. In the case of the amorphous polystyrene(n)-b-poly(ferrocenylphenylmethylsilane)(m) diblock copolymers (PS(n)-b-PFMPS(m): n = 548, m = 73; n = 71, m = 165; where n and m are the number-averaged degrees of polymerization), spherical micelles with an oxidized PFS core and a PS corona were formed upon oxidation of more than 50% of the ferrocenyl units by [N(C(6)H(4)Br-4)(3)][SbX(6)] (X = Cl, F). Analogous block copolymers containing a poly(ferrocenylethylmethylsilane) (PFEMS) metalloblock, which has a lower glass transition temperature, behaved similarly. However, in contrast, on replacement of the amorphous metallopolymer blocks by semicrystalline poly(ferrocenyldimethylsilane) (PFDMS) segments, a change in the observed morphology was detected with the formation of ribbon-like micelles upon oxidation of PS(535)-b-PFDMS(103) above the same threshold value. Again the coronas consisted of fully solvated PS and the core consisted of partially to fully oxidized PFS associated with the counteranions. When oxidation was performed with [N(C(6)H(4)Br-4)(3)][SbF(6)], reduction of the cores of the spherical or ribbon-like micelles with [Co(η-C(5)Me(5))(2)] enabled full recovery of the neutral chains and no significant chain scission was detected. 相似文献
In acidic solution, complex micelles were formed by diblock copolymers of poly (ethylene glycol)-b-poly (ε-caprolactone) (PEG-b-PCL) and folate-poly (2-(dimethylamino) ethyl methylacrylate)-b-poly (ε-caprolactone) (Fol-PDMAEMA-b-PCL) with a PCL core, a mixed PEG/Fol-PDMAEMA shell. The surface charge of the complex micelles was positive at acidic surroundings for the protonated PDMAEMA. With increasing pH value to 7.4 (above pKa of PDMAEMA), these micelles could convert into a core-shell-corona (CSC) structure composing a hydrophobic PCL core, a collapsed PDMAEMA shell, and a soluble PEG corona. Compared to core-shell micelles formed by PEG-b-PCL, micelles with CSC structure can prolong degradation by enzyme. Doxorubicin was physically loaded into the PCL core. The drug release rate was pH-dependent. At pH 5.5, complex micelles with core-shell structure showed faster drug release rate, while at pH 7.4, complex micelles gained CSC structure which control the drug release at a lower rate. The multifunctional complex micelles were prepared for enhanced tumor therapy. 相似文献