Miscibility of sodium chloride and sodium dodecyl sulfate in the adsorbed film and aggregate

The adsorption, micelle formation, and salting out of sodium dodecyl sulfate in the presence of sodium chloride were studied from the viewpoint of their mixed adsorption and aggregate formation. The surface tension of aqueous solutions of a sodium chloride–sodium dodecyl sulfate mixture was measured as a function of the total molality and composition of the mixture. Phase diagrams of adsorption and aggregate formation were obtained by applying thermodynamic equations to the surface tension. Judging from the phase diagrams, sodium chloride and sodium dodecyl sulfate are miscible in the adsorbed film at very large composition of sodium chloride and in the salted-out crystalline particle, while they are immiscible in the micelle. The miscibilities in the adsorbed film, micelle, and crystalline particle increase in the following order: particle > adsorbed film > micelle. The difference in miscibility among the oriented states was ascribed to the difference in geometry between the adsorbed film and micelle and to the interaction between bilayer surfaces in the particle.     

Miscibility of sodium chloride and decyl methyl sulfoxide in the adsorbed film and micelle

The surface tension of aqueous solutions of a sodium chloride (NaCl)-decyl methyl sulfoxide (DeMS) mixture was measured as a function of the total molality of the mixture and the mole fraction of DeMS in the mixture at 298.15 K under atmospheric pressure. The total surface density of the mixture and the mole fraction of DeMS in the adsorbed film and micelle were numerically evaluated by applying the thermodynamic treatment of surfactant mixture to the NaCl-DeMS mixture. Miscibility of NaCl and DeMS in the adsorbed film and micelle was clarified by use of the phase diagram of adsorption and micelle formation. Positive adsorption of NaCl was observed in the presence of DeMS and attributed to attractive interaction between the polar head group of DeMS molecule and Na+ or Cl- ions in the adsorbed film and micelle. The results were compared with those of NaCl-octyl methyl sulfoxide and NaCl-decyldimethylphosphine oxide mixtures to elucidate the structure effect of nonionic surfactant on the miscibility.     

Miscibility of calcium chloride and sodium dodecyl sulfate in the adsorbed film and aggregates

The adsorption, micelle formation, and coagel-particle formation of sodium dodecyl sulfate in the presence of calcium chloride were studied from the viewpoint of mixed adsorption and aggregate formation of inorganic salt and surfactant. Judging from the phase diagrams of adsorption and aggregate formation, negative azeotropy takes place in the mixed adsorption and aggregate formation of calcium chloride and sodium dodecyl sulfate due to electrostatic attraction between calcium and dodecyl sulfate ions. The miscibility of calcium chloride and sodium dodecyl sulfate in the oriented states increases in the order, particle > adsorbed film > micelle. The difference in the miscibility was ascribed to the difference in geometry between the adsorbed film and micelle and to the interaction between bilayer surfaces in the particle. The particle-micelle equilibrium was thermodynamically considered by using the equilibrium composition of aggregates.     

Thermodynamic studies on thin liquid films. III: Miscibility in adsorbed films at film interfaces

Thermodynamic treatment of surfactant mixture was developed for the adsorption at interfaces of thin liquid films and applied to the study of the foam film stabilized by decyl methyl sulfoxide (DeMS) in the presence of NaCl. The total surface density of NaCl and DeMS and the mole fraction of DeMS in the adsorbed film at the film surface were numerically evaluated by applying thermodynamic equations to the film tension as a function of the total molality of NaCl and DeMS and the mole fraction of DeMS in the mixture. Miscibility of NaCl and DeMS at the film surface was clarified by a phase diagram of adsorption and compared with that at the meniscus adjacent to the foam film. Judging from a phase diagram of phase transition, the transition in the DeMS foam film between common black and Newton black films, observed in part II, is a negative azeotropic transformation caused by the attractive interaction between the head group of DeMS molecule and Na⁺ or Cl^– in the adsorbed film.     

Small-angle X-ray scattering in sodium dodecyl sulfate solutions and micelle clustering

The small-angle X-ray scattering (SAXS) in micellar sodium dodecyl sulfate solutions has been studied in the range of overall concentrations c from 8 mM (CMC₁) to 300 mM and the absolute values of scattering vector q from 0.07 to 3.0 nm^–1. The total intensity of isotropic scattering has been revealed to increase with solution concentration. At c > 27 mM, the SAXS spectra have been found to exhibit an interference peak, which testifies a correlation in the arrangement of micelles in the bulk solution. This peak corresponds to the magnitude of q close to 1.55 nm^–1. Using the position of this maximum, average distance r₀ between the centers of micelles has been determined, which is equal to 4.1 nm and remains almost unchanged upon an increase in the overall concentration of sodium dodecyl sulfate. The observed regularities have been explained in terms of the DLVO theory taking into account the electrostatic and molecular intermicellar interaction.     

Location of ethanol in sodium dodecyl sulfate aggregates

The hexagonal liquid crystalline phase of SDS (Sodium dode-cyl sulfate)/H2O system changes into lamellar liquid crystal and the effective length of surfactant molecule d0/2 in the lamellar liquid crystal decreases with the addition of ethanol. The micellar aggregation number N of SDS decreases and the micellar diffusion coefficient increases with the added ethanol. Under a constant concentration of SDS, the molecule number ratio of ethanol to SDS in the micelle increases with the concentration of ethanol and even exceeds 10 when ethanol concentration is 1. 085 mol/L. All these results show that ethanol, even though a short chain alcohol and soluble in water, can partly exist in the interphase of the amphiphilic aggregates showing some properties of co-surfactant.     

Miscibility of sodium chloride and ionic surfactant in adsorbed film and aggregate

The adsorption, micelle formation, and salting-out of dodecylammonium chloride in the presence of NaCl were studied from the viewpoint of mixed adsorption and aggregate formation. The surface tension of aqueous solutions of a NaCl–dodecylammonium chloride mixture was measured as a function of the total molality and composition of the mixture. Judging from phase diagrams of mixed adsorption and aggregate formation, NaCl and dodecylammonium chloride are miscible in the adsorbed film and coagel particle at high NaCl concentrations due to specific (nonelectrostatic) interaction between dodecylamonium ion and the counterion, while they are immiscible in the micelle. The difference in miscibility among the oriented states was ascribed to the difference in geometry among the states and to the interaction between bilayers in a coagel particle. Miscibility and specific interaction are compared between the mixtures of NaCl with dodecylammonium chloride and sodium dodecylsulfate.     

Molecular dynamics simulation of pyrene solubilized in a sodium dodecyl sulfate micelle

In the present work, the structural and dynamical aspects of the solubilization process of pyrene within a sodium dodecyl sulfate micelle were studied using molecular dynamics simulations. Our results showed that free pyrene as the fluorescence probe can be spontaneously solubilized into the micelle and prefers to be located in the hydrophobic core region. As the local concentration of pyrene increased, two molecular probes could enter into the core hydrophobic region and the excited dimer of pyrene molecules was formed, showing a stacking mode of π-π conjugation. Since the π-π stacking interaction between the two pyrene molecules was very weak, formation of the excimer was a dynamic process with the two pyrene molecules alternately separating and associating with each other. In this case, the two pyrene molecules were found to be mainly distributed in the palisade layer of the micelle due to the balance between the weak π-π stacking interaction and the hydrophobic interaction of probe molecules with the surfactant tails.     

A pulsed field gradient NMR diffusion investigation of enkephalin peptide-sodium dodecyl sulfate micelle association

Pulsed field gradient NMR (PFG-NMR) diffusion experiments were used to investigate the binding of leucine and methionine enkephalin peptides to anionic sodium dodecyl sulfate (SDS) micelles. The study was undertaken to investigate the mechanism of interaction between enkephalin peptides and SDS micelles and to determine if NMR-derived association constants, K(eq), can predict the elution order in electrokinetic chromatography (EKC). In EKC, peptides are separated on the basis of their interactions with micelles. The Leu-enkephalin peptide-micelle association constant increased from 130 +/- 8 to 1459 +/- 57 and 1744 +/- 64 M(-1), respectively, when an Arg or Lys was added to the C-terminus. The association constant of Leu-enkephalinamide was approximately equal to that of Leu-enkephalin-Arg. Substitution of Phe4 with a Trp or Gly2 with an Ala in the Leu-enkephalin peptides also increased the micelle binding affinity. These results confirm that the interaction of Leu-enkephalin peptides with SDS micelles is largely electrostatic and that the non-polar amino acid side chains interact with the hydrophobic micelle core. The peptide-micelle association constants for the cationic Met-enkephalin peptides were also greater than their zwitterionic counterparts. For example, the Met-enkephalin K(eq) value was 162 +/- 9 M(-1), while the association constants for Met-enkephalin-Arg, Met-enkephalin-Lys, and Met-enkephalinamide were, respectively, 674 +/- 31, 426 +/- 23, and 453 +/- 27 M(-1). In both Met-enkephalin and Met-enkephalinamide, replacing Gly2 with an Ala did not significantly increase the association constant. These results confirm that with the Met-enkephalin peptides, there was little or no interaction of the amino acid side chains with the micelle core. For both the Leu-enkephalin and Met-enkephalin peptides, the association constants were consistent with EKC results, in that the peptides with smaller K(eq) values were found to elute before those with larger association constants.     

Ionic liquids as modulators of the critical micelle concentration of sodium dodecyl sulfate

Critical micelle concentration (CMC) of sodium dodecyl sulfate (SDS), an anionic surfactant, has been investigated in aqueous solutions of a variety of room temperature ionic liquids (RTILs): 1,3-dimethylimidazolium iodide (Me2IM-I, 2), 1-butyl-3-methylimidazolium chloride (BMIM-Cl, 3), 1-hexyl-3-methylimidazolium chloride (HxMIM-Cl, 4), 1-methyl-3-octylimidazolium chloride (MOIM-Cl), 5, and 1-methyl-3-octylimidazolium tetrafluoroborate (MOIM-BF4, 6). The CMC of SDS is shown to correlate with the nature of the alkyl groups in the RTILs; SDS showed appreciably higher CMCs in presence of ionic liquids 2 and 3, whereas in the presence of ionic liquids 4, 5, and 6 much smaller CMCs were observed. The nature of the gigenions, Cl- or BF4-, has no noticeable effect on the observed CMC values.     

Interaction of cellulase with sodium dodecyl sulfate at critical micelle concentration level

The interactions between Trichoderma reesei cellulase and an anionic surfactant, sodium dodecyl sulfate (SDS), at critical micelle concentration level have been investigated using isothermal titration calorimetry, fluorescence spectroscopy, and circular dichroism. SDS micelles have dual interactions with cellulase: electrostatic at first and then hydrophobic interactions. When the concentration of SDS is smaller than 45.0 mM, SDS micelles cause a partial loss in the hydrolytic activity together with a steep decrease in the -helical content of cellulase. With further increasing the concentration of SDS, however, a re-formation of the -helical structure and a partial recovery of the hydrolytic activity of cellulase induced by SDS micelles are observed. Taken together, these results indicate that SDS micelles exert dual effects on cellulase through binding as both a denaturant and a recovery reagent.     

Poly(N-isopropylacrylamide). I. Interactions with sodium dodecyl sulfate measured by conductivity

Conductometric titration of poly(N-isopropylacrylamide) (polyNIPAM) with sodium dodecyl sulfate (SDS) gave two apparent transitions labeled C1 and C2. The C1 transition was independent of polyNIPAM concentration in the 0.05–0.3 wt % range, whereas C2 was proportional to the polymer concentration. C1 corresponded to the onset of binding of surfactant with polymer. Arguments based on a simple mass action model for micellization are presented to show that C2, the second transition, is not due to any simple explanation such as being the point above which only free micelles are formed with surfactant addition. The cloud point of polyNIPAM increased with the amount of bound surfactant. This was attributed to electrostatic contribution of bound sulfate groups to the increased solubility of polyNIPAM. © 1993 John Wiley & Sons, Inc.     

Conductance of aqueous sodium decyl sulfate solutions and the nature of hydration of the decyl sulfate anion

A study is made of the temperature and concentration dependences for conductance of aqueous sodium decyl sulfate solutions. The nature of hydration of the decyl sulfate anion is discussed within the theories proposed by Samoilov, Gurikov, and Krestov. An analysis is performed of the influence of the hydration type on the critical micelle concentration. The analysis suggests that an increase in temperature stimulates micelle formation given that hydration is negative.     

Synergistic sphere-to-rod micelle transition in mixed solutions of sodium dodecyl sulfate and cocoamidopropyl betaine

Static and dynamic light scattering experiments show that the mixed micelles of sodium dodecyl sulfate (SDS) and cocoamidopropyl betaine (CAPB) undergo a sphere-to-rod transition at unexpectedly low total surfactant concentrations, about 10 mM. The lowest transition concentration is observed at molar fraction 0.8 of CAPB in the surfactant mixture. The transition brings about a sharp increase in the viscosity of the respective surfactant solutions due to the growth of rodlike micelles. Parallel experiments with mixed solutions of CAPB and sodium laureth sulfate (sodium dodecyl-trioxyethylene sulfate, SDP3S) showed that the sphere-to-rod transition in SDP3S/CAPB mixtures occurs at higher surfactant concentrations, above 40 mM. The observed difference in the transition concentrations for SDS and SDP3S can be explained by the bulkier SDP3S headgroup. The latter should lead to larger mean area per molecule in the micelles containing SDP3S and, hence, to smaller spontaneous radius of curvature of the micelles (i.e., less favored transition from spherical to rodlike micelles). The static light scattering data are used to determine the mean aggregation number and the effective size of the spherical mixed SDS/CAPB micelles. From the dependence of the aggregation number on the surfactant concentration, the mean energy for transfer of a surfactant molecule from a spherical into a rodlike micelle is estimated.     

Self aggregation of binary mixtures of sodium dodecyl sulfate and polyoxyethylene alkyl ethers in aqueous solution

The mixed micelles of sodium dodecyl sulphate (SDS) with Brij35 and Brij 97 were studied separately by fluorescence measurement using pyrene as fluorescent probe. In the range of 0–1.0 mole fraction (X) of added SDS to Brij solutions, the cmc value of the mixed micelles varies from 0.085 to 8 mmol with Brij 35 and 0.04 to 8 mmol with Brij 97. The aggregation number also changes. A measure of the stability of mixed micelles is also presented. The interaction parameter ₁₂ and the chain–chain contribution parameter (B₁) are extracted from the analysis of the results. This parameter B₁ is related to the standard free energy change associated with the introduction of one ionic species into a nonionic micelle coupled with the release of one nonionic species from the micelle. The clouding behaviour of Brij 97 in the presence of SDS was investigated and the associated thermodynamic parameters of clouding were generated and discussed.     

The interaction of isomeric hexanediols with sodium dodecyl sulfate and dodecyltrimethylammonium bromide micelles

The micelle formation process for a typical anionic surfactant, sodium dodecyl sulfate, and a typical cationic surfactant, dodecyltrimethylammonium bromide, has been investigated in a series of mixed solvents consisting of different concentrations of isomeric hexanediols (1,2-hexanediol and 1,6-hexanediol) in water. The critical micelle concentrations and the degrees of counterion dissociation of the mixed micelles were obtained from conductance experiments. Luminescence probing experiments have been used to determine the concentration of micelles in solution and, hence, the micellar aggregation numbers of the surfactants in the mixed solvent systems. The alcohol aggregation numbers were determined by combining the partition coefficients (obtained using NMR paramagnetic relaxation enhancement experiments) with the micellar concentrations from the luminescence probing experiments. All these results are interpreted in terms of the difference in the interaction of the isomeric hexanediols with the surfactant as a function of the position of the hydroxyl groups on the six-carbon chain of the alcohol. Received: 28 June 2000/Accepted: 5 July 2000     

The size of sodium dodecyl sulfate micelles in the presence ofn-alcohols as determined by fluorescence quenching measurements

The steady-state fluorescence quenching technique was used to investigate the effect of the presence of a series of alcohol homologues of mid-sized straight chain on the size of mixed micelles of sodium dodecyl sulfate (SDS). We used pyrene at concentration of ca. 10^–6M, where only its monomer exhibits any fluorescence, as fluorescent probe, and cetylpiridinium chloride at concentrations in the range (1–9)×10^–5 M as quencher. This technique allows one to determine the micellar aggregation number. The number of alcohol molecules per micelle was calculated from reported values for the micelle-water partition coefficient. On the assumption of spherical micelles, their hydrophobic radii was then calculated. The hypothesis that micelle size is determined by the available surface area per charged headgroup is discussed in the light of the results obtained.     

聚乙烯共混物的相容性及液-液相分离

综述了聚乙共混物的相容性及液－液相分离行为,介绍了关于液－液相分离研究两派不同观点的实验条件、实验现象和主要结论。     

电导法测定无机盐对十二烷基磺酸钠溶液临界胶束浓度的影响

在40℃时利用电导法测定了无机盐NaCl、KCl、CuCl2、ZnSO4、Fe(NO3)3及AlCl3对十二烷基磺酸钠(SDS)溶液临界胶束浓度(CMC)的影响,并推导了表示无机盐浓度和SDS溶液CMC值之间关系的线性方程.结果表明,随着各种无机盐浓度的增加,SDS溶液的CMC值降低,且不同价态的金属无机盐对SDS溶液...     

The concentration dependence of micelle aggregation and the shape of micelles of sodium dodecyl sulfate and hexadecyltrimethylammonium bromide

The recently reported data by Corti and Degiorgio for the diffusion coefficients and micelle molecular weights of two surfactants were used for correlating the concentration dependence of hydrodynamic and thermodynamic properties of micellar particles.