Competitive adsorption of Pb2+, Cu2+, and Cd2+ ions on microporous titanosilicate ETS-10

In the present study, the competitive adsorption characteristics of binary and ternary heavy metal ions Pb2+, Cu2+, and Cd2+ on microporous titanosilicate ETS-10 were investigated in batch systems. Pure microporous titanosilicate ETS-10 was synthesized with P25 as the Ti source and characterized by the techniques of X-ray diffraction (XRD), field emission-scanning electron microscope (FESEM), nitrogen adsorption, and zeta-potential. Equilibrium and kinetic adsorption data showed that ETS-10 displays a high selectivity toward one metal in a two-component or a three-component system with an affinity order of Pb2+ > Cd2+ > Cu2+. The equilibrium behaviors of heavy metals species with stronger affinity toward ETS-10 can be described by the Langmuir equation while the adsorption kinetics of the metals can be well fitted to a pseudo-second-order (PSO) model.     

红麻纤维改性及其对Ni2+、Cu2+、Cd2+的吸附性研究

向天然纤维链上吸附性功能基制得的改性纤维不仅对金属离子的吸附容量,而且能应用于废水处理和环境保护等诸多领域。如果将大量废弃残麻接枝改性为对应吸附材料,并用于治理废水污染,则更具“双废开发,双废利用”价值。我们以信阳盛产的红麻纤维为母体,选取4-(2-吡啶偶氮)间苯二酚为功能基,在相关工作基础上,制备了4-(2-吡啶偶氮)间苯二酚基红麻纤维。同时,测试红麻纤维对Ni^2 、Cu^2 、Cd^2 的吸附性能,探讨了吸附温度、时间及介质酸度等因素对吸附的影响。     

绿茶对水溶液中Pb2+和Cd2+吸附性能初步研究

研究了绿茶对溶液中Pb2 和Cd2 离子的吸附和解吸性质。考察了pH、温度、吸附时间对绿茶吸附性能的影响,得到吸附动力学曲线和吸附等温线。结果表明,茶叶在pH为4~6的弱酸性范围内对两种金属离子的吸附效果最佳,在30℃时,茶叶对Pb2 和Cd2 的饱和吸附量分别为46.66 mg/g和33.29mg/g,吸附符合Langmuir吸附等温方程,并对吸附机理进行了初步的探讨。对解吸条件研究发现,用0.1 mol/L HCl和EDTA作为解吸剂,对Pb2 和Cd2 的解吸效果较好,解吸率达80%以上,可有效回收重金属Pb2 和Cd2 。     

Heavy metal (Cd2+, Ni2+, Pb2+ and Ni2+) adsorption in aqueous solutions by oxidized starches

Superabsorbent materials based on natural products have been synthesized by free radical oxidation of corn starch using a redox system consisting of potassium permanganate and sodium bisulfite. The resulting oxidized starches were characterized by analyzing the variation of carbonyl and carboxyl contents. The swelling ability of these samples has been determined by gravimetric method in water and in saline solutions. The effect of oxidant concentration and bleaching procedure on the water absorption capacity has been studied. The ability to remove heavy metals in water solution has been tested against Cd²⁺, Ni²⁺, Pb²⁺ and Zn²⁺ ions, showing higher percentage of remotion for the unbleached oxidized starches, in particular against nickel ions. Copyright © 2014 John Wiley & Sons, Ltd.     

Study of sorption of Pb2+, Cd2+, Zn2+ and Cu2+ from wastewater on synthetic analogues of clintonite

The study describes a sorption of metal ions Pb²⁺, Cd²⁺, Zn²⁺ and Cu²⁺ on a synthetic mica clintonite. Synthesis of analogues of clintonite was carried out by using inorganic salts as sources of silicon and aluminum in the hydrothermal method. Alkaline conditions were applied to increase the nucleation rate. Powdered clintonite obtained after mechanical grinding was used for the removal of metal ions from the wastewater. The sorption experiments were done under batch process to measure the concentrations of metal ions. Effects of pH, contact time between sorbent and sorbate solution, amount of sorbent and temperature on the sorption of metal ions were studied. The sorption was shown to increase with the pH of the medium. The optimal conditions for sorption of metal ions on synthetic analogues of clintonite were determined.     

Removal of Pb2+ and Cd2+ ions from aqueous solutions using guanidine modified hydrogels

In this study, experimental measurements have been made on the batch adsorption of cadmium and lead ions from aqueous solutions using poly(guanidine modified 2‐acrylamido‐2‐methylpropan sulfonic acid/acrylic acid/N‐vinylpyrrolidone/2‐Hydroxyethyl methacrylate), P(AMPSG/AAc/NVP/HEMA) hydrogels. The guanidyl end group bearing AMPSG monomer was synthesized from the reaction of AMPS and guanidine. The hydrogels were prepared by UV‐curing technique. The morphology of the dry H10‐hydrogel sample was examined by SEM. The influence of the uptake conditions, such as pH, functional monomer per cent, contact time, initial feed concentration, and foreign metal ions on the metal ion binding capacity of hydrogel, was also tested. The selectivity of the hydrogel toward the different metal ions tested was Hg(II) > Pb(II) > Au(III) > Cd(II). The adsorption isotherm models were applied to the experimental data, and it was seen that the Langmuir isotherm model was the best fit for the adsorption of Cd(II) and Pb(II) ions on P(AMPSG/AAc/NVP/HEMA) hydrogel. It was found that adsorbed lead and cadmium ions on P(AMPSG/AAc/NVP/HEMA) hydrogel can be effectively desorbed by acid leaching and the regenerated P(AMPSG/AAc/NVP/HEMA) hydrogel can be reused almost five times less without any loss of adsorption capacity. Copyright © 2009 John Wiley & Sons, Ltd.     

Simultaneous determination of Cu2+, Zn2+, Cd2+, Hg2+ and Pb2+ by using second-derivative spectrophotometry method

A new method of simultaneous determination of Cu2+, Zn2+, Cd2+, Hg2+ and Pb2+ is proposed here by using the second-derivative spectrophotometry method. In pH=10.35 Borax-NaOH buffer, using meso-tetra (3-methoxyl-4-hydroxylphenyl) porphyrin ([T-(3-MO-4-HP)P]) as chromomeric reagent, micelle solution was formed after Tween-80 surfactant was added into the solution containing Cu2+, Zn2+, Cd2+, Hg2+ and Pb2+ ions. The original absorption spectrum of the above complexes was obtained after heating in the boiling water for 25 min. The second-derivative absorption peaks of five metal-porphyrin complexes can be separated from the original absorption spectrum by using chemometric tool. In this way, Cu2+, Zn2+, Cd2+, Hg2+ and Pb2+ ions can be determined simultaneously. Under the optimal conditions, the linear ranges of the calibration curve were 0-0.60, 0-0.60, 0-0.40, 0-0.80 and 0-0.48 μg mL(-1) for Cu2+, Zn2+, Cd2+, Hg2+ and Pb2+, respectively. The molar absorptivity of these color systems were 1.38×10(5), 1.01×10(5), 3.24×10(5), 1.07×10(5) and 1.29×10(5)Lmol(-1)cm(-1). The method developed in this paper has advantages in selectivity, sensitivity, operation and can effectively resolve spectra overlapping problem. This method has been applied to determine the real samples with satisfactory results.     

Complexation and thermodynamic studies of oxathiadibenzocrown ethers with Cu2+, Pb2+, Zn2+ and Cd2+ ions

A thermodynamic study of the complexation of Cu²⁺, Pb²⁺, Zn²⁺ and Cd²⁺ ions with 1 and 2 in acetonitrile has been carried out. The study was conducted in the temperature range 283–308 K using a conductometric technique. The observed molar conductivity, Λ, was found to decrease significantly for mole ratios [L]_t/[M]_t less than unity in all cases. A model involving 1:1 stoichiometry has been used to analyze the conductivity data. The stability constant, K, for each 1:1 complex was determined from the conductivity data by using a nonlinear least-squares curve fitting procedure. The results show that compound 1 has no peak selectivity for any of the metal cations, while compound 2 selectively associates with Cu²⁺ and Pb²⁺. Complexes of 1 have the following stability order Pb²⁺ > Cu²⁺ > Zn²⁺ > Cd²⁺  and Pb²⁺ > Cu²⁺ for the complexes of 2. The ?H° and ?S° values for the complexation process were obtained from the slope and intercept of the Van’t Hoff plots respectively. All ?G° values were negative and were determined from the Gibbs–Helmholtz equation and the significance of these values is discussed.     

反相高效液相色谱法同时测定镉、铅、铜和锌

 研究了meso-四（对羟基苯基）卟啉为柱前衍生化试剂与Cd2+,Pb2+,Cu2+和Zn2+离子的配合反应条件及配合物在C18色谱柱上的分离条件,建立了反相高效液相色谱快速分离光度检测Cd2+,Pb2+,Cu2+和Zn2+的新方法。配合物和试剂在15 min内出峰完毕。4种离子的检出限为: Cd2+0.02 ng,Pb2+0.02 ng, Cu2+0.02 ng,Zn2+0.12 ng;线性范围为:Cd2+0.8 μg/L～150 μg/L,Pb2+0.8 μg/L～300 μg/L,Cu2+0.8 μg/L～500 μg/L,Zn2+5.0 μg/L～1 000 μg/L;方法的日内相对标准偏差为:2.8%～4.8%,测定低、中、高3个浓度的日间相对标准偏差为3.7%～9.7%。     

Studies on Synthetic Inorganic Ion Exchangers-III Quantitative Separations of Mg2+ -Pb2+, Zn2+ - Pb2+ Cu2+ - Pb2+, Al3+ - Pb2+, Zn2+ - Cd2+, and Mg2+ - Cd2+ on Lead Antimonate Columns

Abstract

A new inorganic ion exchanger, lead antimonate has been synthesized having an Pb:Sb ratio of 1:5 and cation exchange capacity of 1.46 mequiv./g. It is fairly stable in water and dilute solutions of acids, bases and salts. Ion distribution studies on twenty metal ions have been determined on this gel at pH 1,2,3 and 5. The following mixtures have been separated: Mg²⁺ - Pb²⁺, Zn²⁺ - Pb²⁺, Zn²⁺ - Pb²⁺, Cu²⁺ - Pb²⁺, Al³⁺ - Pb²⁺, Zn²⁺ - Cd²⁺ and Mg²⁺ - Cd²⁺. Mg²⁺ and Al³⁺ were removed with 0.4 M ammonium nitrate, Cu²⁺ and Zn²⁺ with 0.4 M ammonium nitrate + 0.1M nitric acid (1:1), Pb²⁺ with 0.5M nitric acid and Cd²⁺ with 0.25M nitric acid. A tentative structure of this material is proposed on the basis of chemical analysis, pH titrations, thermogravimetry and IR spectrophotometry.     

TEMPO-oxidized cellulose hydrogel for efficient adsorption of Cu2+ and Pb2+ modified by polyethyleneimine

Cellulose - In this study, the hydrogel was prepared by dissolving and regenerating poplar cellulose in NaOH/urea/water system. The TEMPO-oxidized cellulose hydrogels (TCH) were prepared using...     

Study of the selection mechanism of heavy metal (Pb2+, Cu2+, Ni2+, and Cd2+) adsorption on clinoptilolite

The study was carried out on the sorption of heavy metals (Ni2+, Cu2+, Pb2+, and Cd2+) under static conditions from single- and multicomponent aqueous solutions by raw and pretreated clinoptilolite. The sorption has an ion-exchange nature and consists of three stages, i.e., the adsorption on the surface of microcrystals, the inversion stage, and the moderate adsorption in the interior of the microcrystal. The finer clinoptilolite fractions sorb higher amounts of the metals due to relative enriching by the zeolite proper and higher cleavage. The slight difference between adsorption capacity of the clinoptilolite toward lead, copper, and cadmium from single- and multicomponent solutions may testify to individual sorption centers of the zeolite for each metal. The decrease of nickel adsorption from multicomponent solutions is probably caused by the propinquity of its sorption forms to the other metals and by competition. The maximum sorption capacity toward Cd2+ is determined as 4.22 mg/g at an initial concentration of 80 mg/L and toward Pb2+, Cu2+, and Ni2+ as 27.7, 25.76, and 13.03 mg/g at 800 mg/L. The sorption results fit well to the Langmuir and the Freundlich models. The second one is better for adsorption modeling at high metal concentrations.     

Adsorption of Pb2+, Zn2+, and Cd2+ from waters by amorphous titanium phosphate

In the current study, amorphous titanium phosphate (TiP) was prepared as an adsorbent for heavy metals from waters. Uptake of Pb(2+), Zn(2+), and Cd(2+) onto TiP was assayed by batch tests; a polystyrene-sulfonic acid exchanger D-001 was selected for comparison and Ca(2+) was chosen as a competing cation due to its ubiquitous occurrence in waters. The pH-titration curve of TiP implied that uptake of heavy metals onto TiP is essentially an ion-exchange process. Compared to D-001, TiP exhibits more preferable adsorption toward Pb(2+) over Zn(2+) and Cd(2+) even in the presence of Ca(2+) at different levels. FT-IR analysis of the TiP samples laden with heavy metals indicated that the uptake of Zn(2+) and Cd(2+) ions onto TiP is mainly driven by electrostatic interaction, while that of Pb(2+) ions is possibly dependent upon inner-sphere complex formation, except for the electrostatic interaction. Moreover, uptake of heavy metals onto TiP approaches equilibrium quickly and the exhausted TiP particles could be readily regenerated by HCl solution.     

Remove of Heavy Metals(Cu2+, Pb2+, Zn2+ and Cd2+) in Water Through Modified Diatomite

At present, heavy metal pollution has become a major environmental problem, influencing the survival of human and other creatures. Developing heavy metal ion adsorbents, which are environment friendly, of low cost and good performance is one of the effective means to solve heavy metal pollution. Rich low-grade diatomite mineral, as raw material, was modified with calcium carbonate to improve the adsorption properties of diatomite for heavy metal ions. The effects of dosage(m), pH, adsorbing time(t), temperature(T) and concentration of adsorbent(c) on the removal rate of heavy metal ions(Cu²⁺, Pb²⁺, Zn²⁺ and Cd²⁺) were studied. The results show that under the suitable conditions, T=15 ℃, c=1.5 mmol/L, m=10 g/L, t=60 min, in a weak acid environment, the removal effect of the four kinds of metal ions by modified diatomite is the best.     

Liganden-Eigenschaften von Oberflächen-Silanol-gruppen. I. Oberflächen-Komplexbildung mit Fe3+, Cu2+, Cd2+ und Pb2+

Ohne Zusammenfassung     

UO2 2+, Tl+, Pb2+, Ra2+, Bi3+ and Ac3+ adsorption onto polyacrylamide-zeolite composite and its modified composition by phytic acid

The adsorption of naturally occurring radionuclides (UO₂ ²⁺, Tl⁺, Pb²⁺, Ra²⁺, Bi³⁺ and Ac³⁺) onto zeolite (Z) and polyacrylamide-zeolite composite (PAA-Z) and its modified composition by phytic acid (Z-Phy and PAA-Z-Phy) were investigated. Adsorption parameters were derived from the Langmuir and Freundlich fits to adsorption isotherms of the ions studied. The adsorption isotherms were of L and H types. The adsorption capacity of Z decreased by PAA inclusion, but the Phy modification of PAA-Z increased the capacity back to that of Z. The Phy modification made the adsorption spontaneity at least ten times better than in the absence of Phy. This investigation showed that the zeolite, as one of the most abundant natural materials and commonly used adsorbent can also be used for the removal of UO₂ ²⁺ and, in the PAA-Z form, of the studied radionuclides. The usage of Z, as PAA-Z and its Phy modification provide research materials which possess adequate practicality and effectiveness in studies of adsorption. This revised version was published online in July 2006 with corrections to the Cover Date.     

生物质竹炭对水中Cd~(2+)的吸附行为研究

以竹炭和经化学改性竹炭作为吸附剂,研究其对水溶液中Cd2+的吸附特性,探讨了竹炭对Cd2+的吸附热力学和吸附动力学性质,通过单因子优化实验探讨了温度、竹炭投加量和p H值对吸附效果的影响。结果表明:竹炭及改性竹炭对Cd2+的吸附动力学过程符合准二级动力学模型,在18h可达到平衡;其等温吸附曲线符合Langmuir方程,最大吸附量分别为10.18mg/g和16.71mg/g;两者对Cd2+的吸附受温度的影响较小;竹炭及改性竹炭的最佳投加量分别为0.8g、0.6g;p H对竹炭及改性竹炭吸附Cd2+的影响较大,在p H 2~6范围时,竹炭及改性竹炭对Cd2+的吸附量随p H的增加而增加。     

Removal of Cu2+ from aqueous solution by chitosan-coated magnetic nanoparticles modified with alpha-ketoglutaric acid

Chitosan-coated magnetic nanoparticles (CCMNPs), modified with a biodegradable and eco-friendly biologic reagent, alpha-ketoglutaric acid (alpha-KA), was used as a magnetic nanoadsorbent to remove toxic Cu(2+) ions from aqueous solution. The prepared magnetic nanoadsorbents were characterized by FTIR, TEM, VSM, XRD, and EDS. Factors influencing the adsorption of Cu(2+), e.g., initial metal concentration, initial pH, contact time and adsorbent concentration were investigated. TEM images show that the dimension of multidispersed circular particles is about 30 nm and no marked aggregation occurs. VSM patterns indicate superparamagnetic properties of magnetic nanoadsorbents. EDS pictures confirm the presence of the Cu(2+) on the surface of magnetic nanoadsorbents. Equilibrium studies show that Cu(2+) adsorption data follow Langmuir model. The maximum adsorption capacity (q(max)) for Cu(2+) ions was estimated to be 96.15 mg/g, which was higher than that of pure CCMNPs. The desorption data show no significant desorption hysteresis occurred. In addition, the high stability and recovery capacity of the chitosan-coated magnetic nanoparticles modified with alpha-ketoglutaric acid (alpha-KA-CCMNPs) suggest that these novel magnetic nanoadsorbents have potential applications for removing Cu(2+) from wastewater.     

Surface characterization and thermodynamics of adsorption of Sr2+, Ce3+, Sm3+, Gd3+, Th4+, UO 2 2+ on activated charcoal from aqueous solution

Surface parameters of the activated charcoal were measured using precise instrumental techniques for dehydration, carbon content, trace metals impurities, anions, bulk, tap and true densities, surface area, pore volume, porosity and average particle diameter. The adsorption of Sr²⁺, Ce³⁺, Sm³⁺, Gd³⁺, Th⁴⁺ and UO ₂ ²⁺ ions on activated charcoal from aqueous solution was studied as a function of temperature. Thermodynamic parameters such as HH ⁰ and S ⁰ were calculated from the slopes and intercepts of the linear variation of lnK ₁ vs. 1/T, whereK ₃ is obtained from Langmuir equation. The results show endothermic heats of adsorption, but negative free energy values indicate that the adsorption process of metal ions on activated charcoal is favored at high temperature. The value of isosteric heat of adsorption, calculated from the Clausius-Clapeyron equation, shows that the surface of the activated charcoal is heterogeneous with respect to activity. A wavelength dispersive x-ray fluorescence spectrometer was used for measuring the concentration of metal ions.