On the selectivity of the biomimetic oxidation of the saturated hydrocarbon 1,3-dimethyladamantane in a Gif-type system containing a Fe2+ salt, picolinic acid, and pyridine

The effects of the composition of a heterogeneous catalytic system based on Fe₂SO₄ · 7H₂O, picolinic acid (pyridine-2-carboxylic acid), and pyridine and system preparation procedures on the selectivity of oxidation of 1,3-dimethyladamantane (1,3-DMA) with an aqueous 30% hydrogen peroxide solution in an aqueous acetonitrile solvent at room temperature and ambient pressure were studied. The yields of 1,3-DMA oxidation products were increased from fractions of a percent in initial experiments to the tens of percent under new catalytic conditions of final experiments. It was found that three different mechanisms can occur in the test system under various conditions; conceivably, these are radical, ion-molecule, and radical-cation mechanisms. In the first case, a statistical mixture of the products of 1,3-DMA oxidation at tertiary and secondary C-H bonds was formed. In the second and third cases, oxidation occurred only at secondary and tertiary C-H bonds, respectively. Unlike the first two cases, the selectivity of 1,3-DMA oxidation to a tertiary alcohol under conditions of the Gif-type test system corresponds to the selectivity of biological oxidation and, to the best of our knowledge, is the first example of this kind.     

Copper-catalyzed oxaziridine-mediated oxidation of C-h bonds

The highly regio- and chemoselective oxidation of activated C-H bonds has been observed via copper-catalyzed reactions of oxaziridines. The oxidation proceeded with a variety of substrates, primarily comprising allylic and benzylic examples, as well as one example of an otherwise unactivated tertiary C-H bond. The mechanism of the reaction is proposed to involve single-electron transfer to the oxaziridines to generate a copper-bound radical anion, followed by hydrogen atom abstraction and collapse to products, with regeneration of the catalyst by a final single-electron transfer event. The involvement of allylic radical intermediates was supported by a radical-trapping experiment with TEMPO.     

The "somersault" mechanism for the p-450 hydroxylation of hydrocarbons. The intervention of transient inverted metastable hydroperoxides

A series of model theoretical calculations are described that suggest a new mechanism for the oxidation step in enzymatic cytochrome P450 hydroxylation of saturated hydrocarbons. A new class of metastable metal hydroperoxides is described that involves the rearrangement of the ground-state metal hydroperoxide to its inverted isomeric form with a hydroxyl radical hydrogen bonded to the metal oxide (MO-OH --> MO....HO). The activation energy for this somersault motion of the FeO-OH group is 20.3 kcal/mol for the P450 model porphyrin iron(III) hydroperoxide [Por(SH)Fe(III)-OOH(-)] to produce the isomeric ferryl oxygen hydrogen bonded to an *OH radical [Por(SH)Fe(III)-O....HO(-)]. This isomeric metastable hydroperoxide, the proposed primary oxidant in the P450 hydroxylation reaction, is calculated to be 17.8 kcal/mol higher in energy than the ground-state iron(III) hydroperoxide Cpd 0. The first step of the proposed mechanism for isobutane oxidation is abstraction of a hydrogen atom from the C-H bond of isobutane by the hydrogen-bonded hydroxyl radical to produce a water molecule strongly hydrogen bonded to anionic Cpd II. The hydroxylation step involves a concerted but nonsynchronous transfer of a hydrogen atom from this newly formed, bound, water molecule to the ferryl oxygen with a concomitant rebound of the incipient *OH radical to the carbon radical of isobutane to produce the C-O bond of the final product, tert-butyl alcohol. The TS for the oxygen rebound step is 2 kcal/mol lower in energy than the hydrogen abstraction TS (DeltaE() = 19.5 kcal/mol). The overall proposed new mechanism is consistent with a lot of the ancillary experimental data for this enzymatic hydroxylation reaction.     

Oxidation of some cage hydrocarbons by dioxiranes. Nature of the transition structure for the reaction of C-H bonds with dimethyldioxirane: a comparison of B3PW91 density functional theory with experiment

Dimethyl- (DMD) and methyl(trifluoromethyl)-dioxiranes were used for oxyfunctionalization of spiro{1',7-cyclopropan-(E)-2-methylbicyclo[2.2.1]heptane} (), tricyclo[3.2.2.0(2,4)]nonane (), exo-endo-endo- () and exo-exo-exo- () heptacyclo[9.3.1.0(2,10).0(3,8).0(4,6).0(5,9).0(12,14)]pentadecane, yielding tertiary alcohols as the main products. The rate constants for oxidation of by DMD were measured and the Arrhenius parameters determined. The DFT theory (B3LYP and B3PW91) using restricted and unrestricted methods was employed to study the oxidation reaction of the C-H bond of cage hydrocarbons , adamantane, and acetone with DMD. The kinetic isotopic effect calculated using unrestricted methods agreed with experiment. The reaction mechanism in terms of the concerted oxygen insertion vs. the radical part is discussed.     

Selective one-electron oxidation of duplex DNA oligomers: reaction at thymines

The one-electron oxidation of duplex DNA generates a nucleobase radical cation (electron "hole") that migrates long distances by a hopping mechanism. The radical cation reacts irreversibly with H2O or O2 to form oxidation products (damaged bases). In normal DNA (containing the four common DNA bases), reaction occurs most frequently at guanine. However, in DNA duplexes that do not contain guanine (i.e., those comprised exclusively of A/T base pairs), we discovered that reaction occurs primarily at thymine and gives products resulting from oxidation of the T-C5 methyl group and from addition to its C5-C6 double bond. This surprising result shows that it is the relative reactivity, not the stability, of a nucleobase radical cation that determines the nature of the products formed from oxidation of DNA. A mechanism for reaction is proposed whereby a thymine radical cation may either lose a proton from its methyl group or H2O/O2 may add across its double bond. In the latter case, addition may initiate a tandem reaction that converts both thymines of a TT step to oxidation products.     

Homolytic C-H and N-H bond dissociation energies of strained organic compounds

High-level computations at G3, CBS-Q, and G3B3 levels were conducted, and good-quality C-H and N-H bond dissociation energies (BDEs) were obtained for a variety of saturated and unsaturated strained hydrocarbons and amines for the first time. From detailed NBO analyses, we found that the C-H BDEs of hydrocarbons are determined mainly by the hybridization of the parent compound, the hybridization of the radical, and the extent of spin delocalization of the radical. The ring strain has a significant effect on the C-H BDE because it forces the parent compound and radical to adopt certain undesirable hybridization. A structure-activity relationship equation (i.e., BDE (C-H) = 61.1-227.8 (p(parent)% - 0.75)(2) + 152.9 (p(radical)% - 1.00)(2) + 40.4 spin) was established, and it can predict the C-H BDEs of a variety of saturated and unsaturated strained hydrocarbons fairly well. For the C-H BDEs associated with the bridgehead carbons of the highly rigid strained compounds, we found that the strength of the C-H bond can also be predicted from the H-C-C bond angles of the bridgehead carbon. Finally, we found that N-H BDEs show less dependence on the ring strain than C-H BDEs.     

Investigation on the regioselectivities of intramolecular oxidation of unactivated C-H bonds by dioxiranes generated in situ

We found that dioxiranes generated in situ from ketones 1-6 and Oxone underwent intramolecular oxidation of unactivated C-H bonds at delta sites of ketones to yield tetrahydropyrans. From the trans/cis ratio of oxidation products 1a and 2a as well as the retention of the configuration at the delta site of ketone 5, we proposed that the oxidation reaction proceeds through a concerted pathway under a spiro transition state. The intramolecular oxidation of ketone 6 showed the preference for a tertiary delta C-H bond over a secondary one. This intramolecular oxidation method can be extended to the oxidation of the tertiary gamma' C-H bond of ketones 9 and 10. For ketone 11 with two delta C-H bonds and one gamma' C-H bond linked respectively by a sp(3) hydrocarbon tether and a sp(2) ester tether, the oxidation took place exclusively at the delta C-H bonds. Finally, by introducing proper tethers, regioselective hydroxylation of steroid ketones 12-14 have been achieved at the C-17, C-16, C-3, and C-5 positions.     

Kinetic and mechanistic studies on the reactions of peroxynitrite with estrone and phenols

Reaction of peroxynitrite with estrone, a female sex hormone, was carried out in tetrahydrofuran (THF)/H₂O (8: 2) basic solutions. The major products are the corresponding o-quinone, nitroestrone and 2,2′-biphenol. The reaction of phenols with peroxynitrite under the same conditions leads also to the formation of quinones, nitrophenols and biphenols. The major mechanistic pathways take place via a one-electron oxidation of the phenolic group leading to the formation of a phenoxyl radical intermediate which is further oxidized by peroxynitrite (or by intermediates generated from peroxynitrite) to give the final products. A Hammett correlation of the rate constants for the oxidation of meta substituted phenols support a radical mechanism. The kinetic isotope factors rule out the involvement of a C-H bond cleavage in the rate-determining step. A multistep mechanism showing major intermediates involved in the reaction and the final products has been proposed. Published in Russian in Kinetika i Kataliz, 2009, Vol. 50, No. 1, pp. 96–105. The article is published in the original.     

Hydrous zinc halide-catalyzed aminosulfonation of hydrocarbons

Benzylic and allylic hydrocarbons are selectively converted to the corresponding sulfonamides by a ZnBr(2)-H(2)O-catalyzed reaction with PhI[double bond, length as m-dash]NTs; saturated adamantane is aminosulfonated at the tertiary C-H bond.     

Electrochemical and ESR studies of the methane C-H bond activation in the presence of radical cations of pyrazine-di-N-oxide and its substituted derivatives

Activation of the methane C-H bond in the presence of electrochemically generated radical cations of pyrazine-di-N-oxide and also of 2,5-dimethyl- and 2,3,5,6-tetramethyl-pyrazine-di-N-oxides is studied by methods of cyclic voltammetry (CVA), quantum chemical simulations, and ESR electrolysis. The studies are carried out on glassy carbon (GC) and Pt electrodes in 0.1 M LiClO₄ solutions in acetonitrile. ESR spectra of radical cations of aromatic di-N-oxides in the absence and in the presence of methane are recorded. The changes in the shape CVA curves and the intensity of ESR signals of di-N-oxide radical cations observed in the presence of methane point to the activation of the methane C-H bond followed by its oxidation. The reaction of pyrazinedi-N-oxide at the methane C-H bond is simulated by quantum chemical methods. The obtained results are explained within the framework of the mechanism of overall two-electron oxidation of methane within its complex with an aromatic di-N-oxide radical cation.     

Probing the Compound I-like reactivity of a bare high-valent oxo iron porphyrin complex: the oxidation of tertiary amines

The mechanisms of oxidative N-dealkylation of amines by heme enzymes including peroxidases and cytochromes P450 and by functional models for the active Compound I species have long been studied. A debated issue has concerned in particular the character of the primary step initiating the oxidation sequence, either a hydrogen atom transfer (HAT) or an electron transfer (ET) event, facing problems such as the possible contribution of multiple oxidants and complex environmental effects. In the present study, an oxo iron(IV) porphyrin radical cation intermediate 1, [(TPFPP)*+ Fe(IV)=O]+ (TPFPP = meso-tetrakis (pentafluorophenyl)porphinato dianion), functional model of Compound I, has been produced as a bare species. The gas-phase reaction with amines (A) studied by ESI-FT-ICR mass spectrometry has revealed for the first time the elementary steps and the ionic intermediates involved in the oxidative activation. Ionic products are formed involving ET (A*+, the amine radical cation), formal hydride transfer (HT) from the amine ([A(-H)]+, an iminium ion), and oxygen atom transfer (OAT) to the amine (A(O), likely a carbinolamine product), whereas an ionic product involving a net initial HAT event is never observed. The reaction appears to be initiated by an ET event for the majority of the tested amines which included tertiary aliphatic and aromatic amines as well as a cyclic and a secondary amine. For a series of N,N-dimethylanilines the reaction efficiency for the ET activated pathways was found to correlate with the ionization energy of the amine. A stepwise pathway accounts for the C-H bond activation resulting in the formal HT product, namely a primary ET process forming A*+, which is deprotonated at the alpha-C-H bond forming an N-methyl-N-arylaminomethyl radical, A(-H)*, readily oxidized to the iminium ion, [A(-H)]+. The kinetic isotope effect (KIE) for proton transfer (PT) increases as the acidity of the amine radical cation increases and the PT reaction to the base, the ferryl group of (TPFPP)Fe(IV)=O, approaches thermoneutrality. The ET reaction displayed by 1 with gaseous N,N-dimethylaniline finds a counterpart in the ET reactivity of FeO+, reportedly a potent oxidant in the gas phase, and with the barrierless ET process for a model (P)*+ Fe(IV)=O species (where P is the porphine dianion) as found by theoretical calculations. Finally, the remarkable OAT reactivity of 1 with C6F5N(CH3)2 may hint to a mechanism along a route of diverse spin multiplicity.     

ReaxFF reactive force field for molecular dynamics simulations of hydrocarbon oxidation

To investigate the initial chemical events associated with high-temperature gas-phase oxidation of hydrocarbons, we have expanded the ReaxFF reactive force field training set to include additional transition states and chemical reactivity of systems relevant to these reactions and optimized the force field parameters against a quantum mechanics (QM)-based training set. To validate the ReaxFF potential obtained after parameter optimization, we performed a range of NVT-MD simulations on various hydrocarbon/O2 systems. From simulations on methane/O2, o-xylene/O2, propene/O2, and benzene/O2 mixtures, we found that ReaxFF obtains the correct reactivity trend (propene > o-xylene > methane > benzene), following the trend in the C-H bond strength in these hydrocarbons. We also tracked in detail the reactions during a complete oxidation of isolated methane, propene, and o-xylene to a CO/CO2/H2O mixture and found that the pathways predicted by ReaxFF are in agreement with chemical intuition and our QM results. We observed that the predominant initiation reaction for oxidation of methane, propene, and o-xylene under fuel lean conditions involved hydrogen abstraction of the methyl hydrogen by molecular oxygen forming hydroperoxyl and hydrocarbon radical species. While under fuel rich conditions with a mixture of these hydrocarbons, we observed different chemistry compared with the oxidation of isolated hydrocarbons including a change in the type of initiation reactions, which involved both decomposition of the hydrocarbon or attack by other radicals in the system. Since ReaxFF is capable of simulating complicated reaction pathways without any preconditioning, we believe that atomistic modeling with ReaxFF provides a useful method for determining the initial events of oxidation of hydrocarbons under extreme conditions and can enhance existing combustion models.     

Reactivity of the C-H bonds of methyl hexanoate toward the <Emphasis Type="Italic">tert</Emphasis>-butylperoxy radical

The kinetics of oxygen uptake and the kinetics of accumulation of methyl hexanoate oxidation products in the presence of tert-butyl hydroperoxide have been investigated to determine the partial rate constants for the interaction of the tert-butylperoxy radical with C-H bonds of the ester at 373 K. The ester group deactivates the C-H bonds in the 2- and 3-positions and does not deactivate the same bonds in the 5-position, which are similar in reactivity to the methylenic C-H bonds of hydrocarbons. The C-H bonds of the methoxyl group of methyl hexanoate are substantially more reactive than the C-H bonds of the methyl group.     

Alkane oxidation by osmium tetroxide

Aqueous alkaline OsO4 at 85 degrees C oxidizes saturated alkanes, including primary, secondary, and tertiary C-H bonds. Isobutane affords tert-butanol in quantitative yield based on consumed OsO4. Cyclohexane is oxidized to a mixture of adipate and succinate. Ethane and propane are oxidized to acetate, which itself is further oxidized under the reaction conditions. A few turnovers of isobutane oxidation have been accomplished using NaIO4 as the terminal oxidant. The alkane oxidation is an example of ligand accelerated catalysis, as hydroxide binding to OsO4 is required for reaction. A concerted mechanism involving [3+2] addition of a C-H bond to two oxo groups of OsO4(OH)- is suggested, analogous to the pathways for dihydroxylation of alkenes by OsO4(L) and for addition of H2 to OsO4(L).     

Theoretical study of the oxidation reactions of methylacrylic acid and methyl methacrylate by triplet O2

The oxidations of organic compounds and polymers by triplet O2 were called "dark oxidation" or "auto-oxidation", in contrast to their "photo-oxidation" by singlet O2. To study the relevant dark oxidation mechanism we take methylacrylic acid (MAA) and methyl methacrylate (MMA) as prototypes to study their reactions with triplet O2 by performing density functional theory calculations. Two reaction channels, the C-H bond oxidation and C=C bond oxidation, have been characterized in detail. The structures of the initial contact charge-transfer complexes, intermediates, transition states, and final oxides involved in the reactions have been localized at the UB3LYP/6-311+G(d,p) level. It is found that the C-H bond in the methyl group connected to the C=C bond presents relatively higher reactivity toward triplet O2 than the C=C bond itself. Thus, the reactions are expected to proceed via the C-H bond oxidation branch at room temperature and also via C=C bond oxidation at elevated temperature. In this sense, an effective method for preventing or retarding the dark oxidations of MAA and MMA in a natural environment is to chemically decorate or protect the C-H bond in the methyl connected to the C=C bond. The present results are expected to provide a general guide for understanding the dark oxidation mechanism of organic compounds and polymers.     

Anomalous C-C bond cleavage in sulfur-centered cation radicals containing a vicinal hydroxy group

1,3-dithianyl cation radicals having alpha-hydroxy-neopentyl or similar groups in position 2, which are generated via oxidative photoinduced electron transfer, undergo anomalous fragmentation necessitating refinement of the accepted mechanism. Experimental and computational data support a rationale in which proton abstraction from the hydroxy group in the initial cation radical does not cause a Grob-like fragmentation, but rather produces a neutral radical species, the alkoxy radical, that undergoes fragmentation in either direction, i.e., cleaving the C-C bond to dithiane or to the tertiary alkyl group.     

Aliphatic and aromatic carbon-fluorine bond activation with Cp*(2)ZrH(2): mechanisms of hydrodefluorination.

Cp*(2)ZrH(2) (1) (Cp* = pentamethylcyclopentadienyl) reacts with primary, secondary, and tertiary monofluorinated aliphatic hydrocarbons to give Cp*(2)ZrHF (2) and/or Cp*(2)ZrF(2) and alkane quantitatively through a radical chain mechanism. The reactivity of monofluorinated aliphatic C-F bonds decreases in the order 1 degrees > 2 degrees > 3 degrees. The rate of hydrodefluorination was also greatly reduced with -CF(2)H and -CF(3) groups attached to the hydrocarbon. An atmosphere of H(2) is required to stabilize 1 against C-H activation of the Cp*-methyl groups and subsequent dimerization under the thermal conditions employed in these reactions. Reaction of 1 with fluorobenzene cleanly forms a mixture of Cp*(2)ZrHF, benzene, and Cp*(2)Zr(C(6)H(5))F. Detailed studies indicate that radicals are not involved in this aromatic C-F activation reaction and that dual hydrodefluorination pathways are operative. In one mechanism, hydridic attack by Cp*(2)ZrH(2) on the aromatic ring and fluoride abstraction is involved. In the second mechanism, an initial ortho C-H activation occurs, followed by beta-fluoride elimination to generate a benzyne complex, which then inserts into the zirconium-hydride bond.     

Electrochemical and ESR studies of the oxidation mechanism of pyrazine-di-N-oxides in the presence of methanol and its deuterated derivatives

The mechanism of oxidation of pyrazine-, 2,5-di-Me-, and 2,3,5,6-tetra-Me-pyrazine-di-N-oxides in the presence of methanol and its deuterated derivatives (CH₃OD, CD₃OD), i.e., compounds exhibiting the high energy of C-H bond dissociation, is studied by the methods of cyclic voltammetry, ESR electrolysis, and quantum chemical modeling. The study is carried out on a glassy carbon (GC) electrode in acetonitrile and on an Au electrode in solutions of different alcohols (methanol and its deuterated derivatives CH₃OD, CD₃OD). In alcohol solutions, the ESR spectra of radical cations and radical anions of the tested aromatic di-N-oxides are observed. The quantum chemical simulation of the reaction of the pyrazine-di-N-oxide radical cation with the MeOH C-H bond is carried out. The results obtained are explained within the framework of the E₁C₁E₂C₂ mechanism for a two-stage electrode process determined by the catalytic current of the second electrode stage. The overall two-electron catalytic oxidation of an alcohol within its complex with the pyrazine-di-N-oxide radical cation is proposed.     

Stable Radical Cation and Dication of an N-Heterocyclic Carbene Stabilized Digallene: Synthesis,Characterization and Reactivity

One- and two-electron oxidation of a digallene stabilized by an N-heterocyclic carbene afforded the first stable gallium-based radical cation and dication salts, respectively. Structural analysis and theoretical calculations reveal that the oxidation occurs at the Ga=Ga double bond, leading to removal of π electrons of the double bond and a decrease of the bond order. The spin density of the radical cation mainly locates at the two gallium centers as demonstrated by EPR spectroscopy and theoretical calculations. Moreover, the reactivity of the radical cation salt toward nBu₃SnH and cyclo-S₈ was studied; a digallium–hydride cation salt containing a Ga−Ga single bond and a gallium sulfide cluster bearing an unprecedented ladder-like Ga₄S₄ core structure were obtained, respectively.