Template Syntheses Involving the Carbon Acid Nitroethane. Synthesis and Characterization of Copper(II) Complexes of a 16-membered Tetraaza Macrocycle

New square-planar Cu(II) complexes of 3,11-dimethyl-3,11-dinitro-1,5,9,13-tetraazacyclohexadecane and 1,11-diamino-6-methyl-6-nitro-4,8-diazaundecane cations have been prepared from the one-pot template condensation of [Cu(pn)₂]²⁺ (pn=1,3-diaminopropane) in MeOH with CH₂O and EtNO₂ in the presence of a noncoordinating base. Reduction of the nitro group in the (3,11-dimethyl-3,11-dinitro-1,5,9,13-tetraazacyclohexadecane)copper(II) cation, may be achieved by Zn/acid reduction. The Cu(II) complex of the reduced form of the ligand, namely (3,11-diammonio-3,11-dimethyl-1,5,9,13-tetraazacyclohexadecane)copper(II), has also characterized. With the macrocyclic ligand, rac and meso isomers have been identified, the meso form being the major product. Elemental analyses, i.r. and u.v.–vis. spectroscopy, f.a.b. mass spectra conductometric, magnetic measurements and cyclic voltammetry have been used to characterize the complexes.     

The stability of the <Superscript>105</Superscript>[Rh(16S<Subscript>4</Subscript>diol)Cl<Subscript>2</Subscript>]<Superscript>+</Superscript> radiopharmaceutical precursor in solutions containing human plasma thiols

¹⁰⁵Rh[1,5,9,13-tetrathiacyclohexadecane-3,11-diol] is a promising drug precursor for targeted radiotherapy. Nevertheless, the axial position of chloride ions in the complex structure and their weak binding to rhodium centre, due to HSAB concept, make such a complex subject to modifying action of certain sulphuric ligands, like human plasma thiol antioxidants: glutathione and cysteine. Experiments were performed with both radioactive ¹⁰⁵Rh and inactive rhodium. The complexation of rhodium with 1,5,9,13-tetrathiacyclohexadecane-3,11-diol (16S₄diol) resulted in three distinct peaks seen on UV, radiometric and MS chromatograms. The substitution of chlorides was noted in over 80% of ¹⁰⁵[Rh(16S₄diol)Cl₂]⁺ units after incubation with glutathione, and less than 10% of complex units after incubation with cysteine (24 h, 37 °C). Reaction of ¹⁰⁵[Rh(16S₄diol)Cl₂]⁺ with 1,8-octandithiol and 1,9-nonandithiol resulted in disappearance of the complex peak and occurrence of two new peaks. Product of RhCl₃ and 16S₄diol reaction is a mixture of three distinct forms having different number of chlorine atoms. Our in vitro experiments suggest that the substitution of axial chlorides with glutathione and cysteine might also occur in vivo in human plasma. Glutathione shows higher reactivity than cysteine in replacement reaction. Axial positions in precursor might be effectively blocked by 1,8-octandithiol and 1,9-nonandithiol.     

Sorption isotherms of Nickel(II), Cobalt(II), Mercury(II), and Lead(II) ions on a phosphorus-containing polymeric sorbent

The influence of the concentration of a complexing ion on the sorption recovery of nickel, cobalt, mercury, and lead ions from aqueous solutions by a phosphorus-containing polymeric polybutadiene-based sorbent was studied. Sorption isotherms of the studied metal ions were processed by the Langmuir and Freindlich models. The affinity of metal ions to the functional groups of a sorbent and the stability of complexes were established to decrease in the order Hg(II) > Pb(II) > Co(II) > Ni(II).     

A new polymeric phthalocyanine containing 16-membered tetrathia macrocyclic moieties by microwave irradiation: Synthesis and characterization

Tetranitrile monomer (3) was synthesized by nucleophilic aromatic substitution of 1,5,9,13-tetrathiacyclohexadecane-3,11-diol (1) onto 4-nitrophthalonitrile (2). The metal-free phthalocyanine polymer (4) was prepared by the reaction of a tetranitrile monomer with 4-({11-[3-cyano-4-(cyanomethyl)phenoxy]-1,5,9,13-tetrathiacyclohexadecan-3-yl}oxy)phthalonitrile in 2-(dimethylamino)ethanol. Ni(II), Co(II), Cu(I)-phthalocyanine polymers were prepared by the reaction of the tetranitrile compound with the chlorides of Ni(II), Co(II) and Cu(I) in DMAE. Zn(II)-phthalocyanine polymer was prepared by the reaction of the tetranitrile compound with the acetates of Zn(II) in DMAE. The new compounds were characterized by a combination of IR, ¹H NMR, ¹³C NMR, UV-Vis, elemental analysis and MS spectral data.     

Technetium complexes with thioether ligands—III. Synthesis and structural characterization of cationic nitridotechnetium(V) complexes with thiacrown ethers

The first representative of a new class of TcN complexes with thiacrown ethers have been prepared by ligand exchange reaction of NBu₄[TcNCl₄] with 1,4,8,11-tetrathiacyclotetradecane (14S4), 1,5,9,13-tetrathiacyclohexadecane (16S4), 1,5,9,13-tetrathiacyclohexadecane-3,11-diole (16S4-(OH)₂) and 1,4,7,10,13,16-hexathiacyclooctadecane (18S6). The crystal structure of [TcNCl(14S4)]TcNCl₄ 1) consists of couples of independent cations with the metal in the oxidation state + 5 and hexavalent TcNCl₄⁻ anions. In the complex cation the metal is six-coordinated in a rather distorted octahedral geometry, being directly bound to four sulphur atoms from the macrocyclic ligand in the equatorial plane and to the nitrido atom and to one chlorine atom in the axial positions. The strong trans influence of the nitrido ligand causes an extreme lengthening of the Tc---Cl bond distance to 2.718 Å. The octahedral molecular structure of [TcNCl(18S6)]TcNCl₄ (3) is comparable with that of 1, but only four sulphur atoms of the thiacrown ether form the equatorial plane, two sulphur atoms remain non-coordinated, and the nitrido and Cl⁻ ligands are in axial positions. The most interesting feature in the structure of [TcNCl(16S4-(OH)₂)]Cl (5) is the observation of an exceptionally long Tc---N distance of 1.95 Å.     

Interactions of mercury(II), lead(II), calcium(II), aluminium(III) or ferric(III) nitrate with single and double chain linear alkylbenzenesulfonates in aqueous and sea-water media

The solubility products of mercury(II) and lead(II) dodecylbenzenesulfonates were calculated on the basis of light scattering measurements at 20°C to be (9.33 ± 0.90) × 10⁻¹³ and (1.03 ± 0.10) × 10⁻¹² respectively. The investigations of precipitation phenomena performed in diluted natural sea-water ([Cl⁻] = 10⁻¹² mol dm ⁻³), including tenside and added heavy metal ions, showed similar behaviour for all metal dodecylbenzenesulfonates investigated in this work, i.e. the synergistic effect of tenside, of added electrolyte, and of cations and anions from sea-water. A comparison made by a statistical test of significance, chosen to measure agreement between the estimates of the solubility constants obtained in aqueous solutions and in the above mentioned sea-water solution, showed a noticeable effect, evident particularly in the case of mercury(II). The precipitation of tenside and metal nitrates in natural sea-water ([Cl⁻] = 5 × 10⁻¹ mol dm⁻³) covers a wide concentration region of dodecylbenzenesulfonic acid (from high concentrations to 5 × 10⁻⁶ mol dm⁻³) and from high metal nitrate concentrations to very low. The microscopic textures of phases precipitated in the systems with sea-water obviously confirmed favouring formation of the liquid crystalline phase.     

Matrix elimination method for the determination of precious metals in ores using electrothermal atomic absorption spectrometry

Poly(N-(hydroxymethyl)methacrylamide)-1-allyl-2-thiourea) hydrogels, poly(NHMMA-ATU), were synthesized by gamma radiation using ⁶⁰Co γ source in the ternary mixture of NHMMA-ATU-H₂O. These hydrogels were used for the specific gold, silver, platinum and palladium recovery, pre-concentration and matrix elimination from the solutions containing trace amounts of precious metal ions. Elimination of inorganic matrices such as different transition and heavy metal ions, and anions was performed by adjusting the solution pH to 0.5 that was the selective adsorption pH of the precious metal ions. Desorption of the precious metal ions was performed by using 0.8 M thiourea in 3 M HCl as the most efficient desorbing agent with recovery values more than 95%. In the desorption medium, thiourea effect on the atomic signal was eliminated by selecting proper pyrolysis and atomization temperatures for all precious metal ions. Precision and the accuracy of the results were improved in the graphite furnace-atomic absorption spectrometer (GFAAS) measurements by applying the developed matrix elimination method performing the adsorption at pH 0.5. Pre-concentration factors of the studied precious metal ions were found to be at least 1000-fold. Detection limits of the precious metal ions were found to be less than 10 ng L⁻¹ of the all studied precious metal ions by using the proposed pre-concentration method. Determination of trace levels of the precious metals in the sea-water, anode slime, geological samples and photographic fixer solutions were performed using GFAAS clearly after applying the adsorption-desorption cycle onto the poly(NHMMA-UTU) hydrogels.     

Salisaldehyde-2-aminobenzimidazole schiff base complexes of Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II)

New metal complexes of Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) with salicylidine-2-aminobenzimidazole (SABI) are synthesized and their physicochemical properties are investigated using elemental and thermal analyses, IR, conductometric, solid reflectance and magnetic susceptibility measurements. The base reacts with these metal ions to give 1:1 (Metal:SABI) complexes; in cases of Fe(III), Co(II), Cu(II), Zn(II) and Cd(II) ions; and 1:2 (Metal:SABI) complexes; in case of Ni(II) ion. The conductance data reveal that Fe(III) complex is 2:1 electrolyte, Co(II) is 1:2 electrolyte, Cu(II), Zn(II) and Cd(II) complexes are 1:1 electrolytes while Ni(II) is non-electrolyte. IR spectra showed that the ligand is coordinated to the metal ions in a terdentate mannar with O, N, N donor sites of the phenloic -OH, azomethine -N and benzimidazole -N3. Magnetic and solid reflectance spectra are used to infer the coordinating capacity of the ligand and the geometrical structure of these complexes. The thermal decomposition of the complexes is studied and indicates that not only the coordinated and/or crystallization water is lost but also that the decomposition of the ligand from the complexes is necessary to interpret the successive mass loss. Different thermodynamic activation parameters are also reported, using Coats-Redfern method. This revised version was published online in July 2006 with corrections to the Cover Date.     

Synthesis, investigation and spectroscopic characterization of piroxicam ternary complexes of Fe(II), Fe(III), Co(II), Ni(II), Cu(II) and Zn(II) with glycine and DL-phenylalanine

The ternary piroxicam (Pir; 4-hydroxy-2-methyl-N-(2-pyridyl)-2H-1,2-benzothiazine-3-carboxamide 1,1-dioxide) complexes of Fe(II), Fe(III), Co(II), Ni(II), Cu(II) and Zn(II) with various amino acids (AA) such as glycine (Gly) or DL-phenylalanine (PhA) were prepared and characterized by elemental analyses, molar conductance, IR, UV-Vis, magnetic moment, diffuse reflectance and X-ray powder diffraction. The UV-Vis spectra of Pir and the effect of metal chelation on the different interligand transitions are discussed in detailed manner. IR and UV-Vis spectra confirm that Pir behaves as a neutral bidentate ligand coordinated to the metal ions via the pyridine-N and carbonyl group of the amide moiety. Gly molecule acted as a uninegatively monodentate ligand and coordinate to the metal ions through its carboxylic group, in addition PhA acted as a uninegatively bidentate ligand and coordinate to the metal ions through its carboxylic and amino groups. All the chelates have octahedral geometrical structures while Cu(II)- and Zn(II)-ternary chelates with PhA have square planar geometrical structures. The molar conductance data reveal that most of these chelates are non electrolytes, while Fe(III)-Pir-Gly, Co(II)-, Ni(II)-, Cu(II)- and Zn(II)-Pir-PhA chelates were 1:1 electrolytes. X-ray powder diffraction is used as a new tool to estimate the crystallinity of chelates as well as to elucidate their geometrical structures.     

Preparation, characterization and biological activity of Fe(III), Fe(II), Co(II), Ni(II), Cu(II), Zn(II), Cd(II) and UO(2)(II) complexes of new cyclodiphosph(V)azane of sulfaguanidine

Novel hexachlorocyclodiphosph(V)azane of sulfaguanidine, H(4)L, l,3-[N'-amidino-sulfanilamide]-2,2,2,4,4,4-hexachlorocyclodiphosph(V)azane was prepared and its coordination behaviour towards the transition metal ions Fe(III), Fe(II), Co(II), Ni(II), Cu(II), Zn(II), Cd(II) and UO(2)(II) was studied. The structures of the isolated products are proposed based on elemental analyses, IR, UV-vis, (1)H NMR, mass spectra, reflectance, magnetic susceptibility measurements and thermogravimetric analysis (TGA). The hyperfine interactions in the isolated complex compounds were studied using 14.4keV gamma-ray from radioactive (57)Co (M?ssbauer spectroscopy). The data show that the ligand are coordinated to the metal ions via the sulfonamide O and deprotonated NH atoms in an octahedral manner. The H(4)L ligand forms complexes of the general formulae [(MX(z))(2)(H(2)L)H(2)O)(n)] and [(FeSO(4))(2) (H(4)L) (H(2)O)(4)], where X=NO(3) in case of UO(2)(II) and Cl in case of Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II). The molar conductance data show that the complexes are non-electrolytes. The thermal behaviour of the complexes was studied and different thermodynamic parameters were calculated using Coats-Redfern method. Most of the prepared complexes showed high bactericidal activity and some of the complexes show more activity compared with the ligand and standards.     

Synthesis, characterization and biological activities of Cu(II), Co(II), Mn(II), Fe(II), and UO2(VI) complexes with a new Schiff Base hydrazone: O-hydroxyacetophenone-7-chloro-4-quinoline hydrazone

The Schiff base hydrazone ligand HL was prepared by the condensation reaction of 7-chloro-4-quinoline with o-hydroxyacetophenone. The ligand behaves either as monobasic bidentate or dibasic tridentate and contain ONN coordination sites. This was accounted for be the presence in the ligand of a phenolic azomethine and imine groups. It reacts with Cu(II), Ni(II), Co(II), Mn(II), UO(2) (VI) and Fe(II) to form either mono- or binuclear complexes. The ligand and its metal complexes were characterized by elemental analyses, IR, NMR, Mass, and UV-Visible spectra. The magnetic moments and electrical conductance of the complexes were also determined. The Co(II), Ni(II) and UO(2) (VI) complexes are mononuclear and coordinated to NO sites of two ligand molecules. The Cu(II) complex has a square-planar geometry distorted towards tetrahedral, the Ni(II) complex is octahedral while the UO(2) (VI) complex has its favoured heptacoordination. The Co(II), Mn(II) complexes and also other Ni(II) and Fe(III) complexes, which were obtained in the presence of Li(OH) as deprotonating agent, are binuclear and coordinated via the NNNO sites of two ligand molecules. All the binuclear complexes have octahedral geometries and their magnetic moments are quite low compared to the calculated value for two metal ions complexes and thus antiferromagnetic interactions between the two adjacent metal ions. The ligand HL and metal complexes were tested against a strain of Gram +ve bacteria (Staphylococcus aureus), Gram -ve bacteria (Escherichia coli), and fungi (Candida albicans). The tested compounds exhibited high antibacterial activities.     

Synthesis,spectral, thermal,and magnetic studies of cobalt(II), nickel(II), copper(II), zinc(II), and cadmium(II) complexes with N2O2 donor groups

A new Schiff base ligand was prepared by condensation of 2-hydroxy-4-methoxybenzaldehyde with 1,2-propanediamine. The ligand and its metal complexes were characterized by elemental analysis, FT-IR, ¹H and ¹³C NMR, magnetic moment, molar conductance, UV-Vis, SEM and thermal analysis (TGA). The molar conductance measurements indicated that all the metal complexes were non-electrolytes. IR spectra showed that ligand (L) behaves as a neutral tetradentate ligand and binds to the metal ions by the two azomethine nitrogen atoms and two phenolic oxygen atoms. The electronic absorption spectra and magnetic susceptibility measurements indicated square planar geometry for the Ni(II) and Cu(II) complexes while other metal complexes showed tetrahedral geometry. Also the surface morphology of the complexes was studied by SEM.     

Synthesis,Structural, Biological Evaluation,Molecular Docking and DFT Studies of Co(II), Ni(II), Cu(II), Zn(II), Cd(II) and Hg(II) Complexes bearing Heterocyclic Thiosemicarbazone ligand

A new ligand, 2‐aminonicotinaldehyde N‐methyl thiosemicarbazone (ANMTSC) and its metal complexes [Co(II) ( 1 ); Ni(II) ( 2 ); Cu(II) ( 3 ); Zn(II) ( 4 ); Cd(II) ( 5 ) or Hg(II) ( 6 )] were synthesized. The compounds were characterized by analytical methods and various spectroscopic (infrared, magnetic, thermal, ¹H, ¹³C NMR, electronic and ESR) tools. The structure of ANMTSC ligand was confirmed by single crystal X‐ray diffraction study. The spectral data of metal complexes indicate that the ligand acts as mononegative, bidentate coordination through imine nitrogen (N) and thiocarbonyl sulphur (S^?) atoms. The proposed geometries for complexes were octahedral ( 1 – 2 ), distorted octahedral ( 3 ) and tetrahedral ( 4 – 6 ). Computational details of theoretical calculations (DFT) of complexes have been discussed. The compounds were subjected to antimicrobial, antioxidant, antidiabetic, anticancer, ROS, studies and EGFR targeting molecular docking analysis. Complex 5 has shown excellent antibacterial activity and the complexes 2 and 5 have shown good antifungal activity. The complexes 1 and 4 displayed good antioxidant property with IC₅₀ values of 11.17 ± 1.92 μM and 10.79 ± 1.85 μM, respectively compared to standard. In addition, in vitro anticancer activity of the compounds was investigated against HeLa, MCF‐7, A549, IMR‐32 and HEK 293 cell lines. Among all the compounds, complex 4 was more effective against HeLa (IC₅₀ = 10.28 ± 0.69 μM), MCF‐7 (IC₅₀ = 9.80 ± 0.83 μM), A549 (IC₅₀ = 11.08 ± 0.57 μM) and IMR‐32 (10.41 ± 0.60 μM) exhibited superior anticancer activity [IC₅₀ = 9.80 ± 0.83 ( 4 ) and 9.91 ± 0.37 μM ( 1 )] against MCF‐7 compared with other complexes.     

Ca(II), Sr(II) and Ba(II) ion interaction with the rheumatoid arthritis drug tenoxicam: Structural,thermal, and biological characterization

Recently, one of the most common conditions that manifests as joint and muscle inflammation is rheumatoid arthritis. One of the treatments for this arthritis includes non‐steroidal anti‐inflammatory drugs (NSAIDs) of the oxicam family, and the widest used drug in this family is tenoxicam (Tenox). In this study, the complexation properties of the drug Tenox with Ca(II), Sr(II) and Ba(II) ions in a (dichloromethane + water) binary solvent system are reported. The formed metal complexes were characterized structurally, thermally, and biologically. Tenox was found to act as a chelate monoanionic ligand towards all metal ions with complexation stoichiometry of 1:2 (Metal: Tenox) for Ca(II) and Sr(II) ions, and 1:1 for Ba(II) ions. The Tenox ligand behaves as a bidentate ligand when coordinated with Sr(II) or Ba(II) ions and as a tridentate ligand when coordinated with Ca(II) ions. The Sr(II) and Ba(II) complex of the Tenox ligand exhibited marked inhibitory effect on the cell growth of the C. albicans species.     

Synthesis, magnetic, spectral, and antimicrobial studies of Cu(II), Ni(II) Co(II), Fe(III), and UO2(II) complexes of a new Schiff base hydrazone derived from 7-chloro-4-hydrazinoquinoline

A new hydrazone ligand, HL, was prepared by the reaction of 7-chloro-4-hydrazinoquinoline with o-hydroxybenzaldehyde. The ligand behaves as monoprotic bidentate. This was accounted for as the ligand contains a phenolic group and its hydrogen atom is reluctant to be replaced by a metal ion. The ligand reacted with Cu(II), Ni(II), Co(II), Fe(III), and UO2(II) ions to yield mononuclear complexes. In the case of Fe(III) ion two complexes, mono- and binuclear complexes, were obtained in the absence and presence of LiOH, respectively. Also, mixed ligand complexes were obtained from the reaction of the metal cations Cu(II), Ni(II) and Fe(III) with the ligand (HL) and 8-hydroxyquinoline (8-OHqu) in the presence of LiOH, in the molar ratio 1:1:1:1. It is clear that 8-OHqu behaves as monoprotic bidentate ligand in such mixed ligand complexes. The ligand, HL, and its metal complexes were characterized by elemental analyses, IR, UV-vis, mass, and 1H NMR spectra, as well as magnetic moment, conductance measurements, and thermal analyses. All complexes have octahedral configurations except Cu(II) complex which has an extra square-planar geometry, while Ni(II) mixed complex has also formed a tetrahedral configuration and UO2(II) complex which formed a favorable pentagonal biprymidial geometry. Magnetic moment of the binuclear Fe(III) complex is quite low compared to calculated value for two iron ions complex and thus shows antiferromagnetic interactions between the two adjacent ferric ions. The HL and metal complexes were tested against one stain Gram positive bacteria (Staphylococcus aureus), Gram negative bacteria (Escherichia coli), and fungi (Candida albicans). The tested compounds exhibited higher antibacterial acivities.     

Enrichment of iron(III), cobalt(II), nickel(II), and copper(II) by solid-phase extraction with 1,8-dihydroxyanthraquinone anchored to silica gel before their determination by flame atomic absorption spectrometry

A chelating matrix prepared by immobilizing 1,8-dihydroxyanthraquinone on silica gel modified with 3-aminopropyltriethoxysilane has been characterized by use of cross-polarization magic angle spinning (CPMAS) NMR, diffuse reflectance infrared Fourier transformation (DRIFT) spectroscopy, and thermogravimetric analysis and used to preconcentrate Fe(III), Co(II), Ni(II), and Cu(II) before their determination by flame atomic absorption spectrometry. The optimum pH ranges for quantitative sorption are 6.5-8.0, 6.0-7.0, 6.0-8.0, and 7.0-8.5 for Cu, Fe, Co, and Ni, respectively. All the metal ions can be desorbed with 2 mol L(-1) HCl or HNO3. The sorption capacity ( micromol g(-1) matrix) and preconcentration factor were 226.6, 250; 365.6, 300; 101.8, 150; and 109.0, 250 for Cu, Fe, Co, and Ni, respectively. The lowest concentration for quantitative recovery was 4.0, 3.3, 6.6, and 4.0 ng mL(-1), respectively for the four metal ions. The limits up to which electrolytes NaNO3, NaCl, NaBr, Na2SO4, and Na3PO4 and cations Ca(II) and Mg(II) can coexist with the four metal ions during their sorption without adverse effect are reported. The simultaneous enrichment and determination of all the four metals is possible if the total load of metal ions is less than the sorption capacity. Flame AAS was used to determine the metal ions in underground, tap, and river water samples (RSD相似文献   

A new chelating resin for preconcentration and determination of Mn(II), Ni(II), Cu(II), Zn(II), Cd(II), and Pb(II) by flame atomic absorption spectrometry

A new polychelatogen, AXAD-16-1,2-diphenylethanolamine, was developed by chemically modifying Amberlite XAD-16 with 1,2-diphenylethanolamine to produce an effective metal-chelating functionality for the preconcentration of Mn(II), Ni(II), Cu(II), Zn(II), Cd(II), and Pb(II) and their determination by flame atomic absorption spectrometry. Various physiochemical parameters that influence the quantitative preconcentration and recovery of metal were optimized by both static and dynamic techniques. The resin showed superior extraction efficiency with high-metal loading capacity values of 0.73, 0.80, 0.77, 0.87, 0.74, and 0.81 mmol/g for Mn(II), Ni(II), Cu(II), Zn(II), Cd(II), and Pb(II), respectively. The system also showed rapid metal-ion extraction and stripping, with complete saturation in the sorbent phase within 15 min for all the metal ions. The optimum condition for effective metal-ion extraction was found to be a neutral pH, which is a great advantage in the preconcentration of trace metal ions from natural water samples without any chemical pretreatment of the sample. The resin also demonstrated exclusive ion selectivity toward targeted metal ions by showing greater resistivity to various complexing species and more common metal ions during analyte concentration, which ultimately led to high preconcentration factors of 700 for Cu(II); 600 for Mn(II), Ni(II), and Zn(II); and 500 for Cd(II) and Pb(II), arising from a larger sample breakthrough volume. The lower limits of metal-ion detection were 7 ng/mL for Mn(II) and Ni(II); 5 ng/mL for Cu(II), Zn(II), and Cd(II), and 10 ng/mL for Pb(II). The developed resin was successful in preconcentrating metal ions from synthetic and real water samples, multivitamin-multimineral tablets, and curry leaves (Murraya koenigii) with relative standard deviations of < or = 3.0% for all analytical measurements, which demonstrated its practical utility.     

Synthesis, structure, and fluorescence of two cadmium(II)-citrate coordination polymers with different coordination architectures

Two novel Cd(II)-citrate complexes were obtained with different metal/ligand ratios through hydrothermal method. Their structures were determined by single-crystal X-ray diffraction analysis. Although their topological structures are both 2-D layer network assemblies, both central Cd(II) ions and Hcit³⁻ ligands display completely different coordination modes. In polymeric complex 1, Hcit³⁻ serves as a μ₁₀-bridged and central Cd(II) ions adopt 6- and 8-coordinated configurations. In contrast, a μ₉-bridged and 6- and 7-coordinated environments between Cd(II) and Hcit³⁻ are established in the polymeric complex 2. Two Complexes remain stable up to approximately 300 °C. The complex 1 exhibits strong fluorescent emission band at 450 nm (λ=346 nm) as well as complex 2 exhibits strong fluorescent emission band at 430 (λ=346 nm).     

Three-ring, branched cyclam derivatives and their interaction with nickel(II), copper(II), zinc(II) and cadmium(II)

The interaction of two symmetrically branched tris-cyclam derivatives based on 1,3,5-trimethylenebenzene and phloroglucinol cores with nickel(II), copper(II), zinc(II) and cadmium(II) is reported. All four metal ions yield solid complexes in which the metal : ligand ratio is 3 : 1. For both ligand types, spectrophotometric titrations confirm the formation of nickel(II) and copper(II) complexes of similar 3 : 1 stoichiometry in dimethyl sulfoxide. Visible spectral, electrochemical, magnetic moment, ESR and NMR studies have been performed to probe the nature of the respective complexes. Where appropriate, the results from the above metal-ion studies are compared with those from parallel investigations in which the corresponding (substituted) mono-cyclam analogues were employed as the ligands. A structural determination employing a poorly diffracting crystal of the trinuclear nickel(II) complex of the tris-cyclam ligand incorporating a 1,3,5-trimethylenebenzene core was successfully carried out with the aid of a synchrotron radiation source. A nickel ion occupies each cyclam ring in a square-planar coordination arrangement, with each cyclam ring adopting the stable trans-III configuration.     

Spectroscopic studies on Mn(II), Co(II), Ni(II), and Cu(II) complexes with N-donor tetradentate (N4) macrocyclic ligand derived from ethylcinnamate moiety

Manganese(II), cobalt(II), nickel(II), and copper(II) complexes are synthesized with a novel tetradentate ligand, viz. 1,5,9,13-tetraaza-6,14-dioxo-8,16-diphenylcyclohexadecane (L) and characterized by the elemental analysis, molar conductance measurements, magnetic susceptibility measurements, mass, 1H NMR, IR, electronic, and EPR spectral studies. The molar conductance measurements of the complexes in DMSO correspond to be nonelectrolyte nature for Mn(II), Co(II), and Cu(II) whereas 1:2 electrolytes for Ni(II) complexes. Thus, these complexes may be formulated as [M(L)X(2)] and [Ni(L)]X(2), respectively (where M = Mn(II), Co(II), and Cu(II) and X = Cl- and NO(3-)). On the basis of IR, electronic, and EPR spectral studies an octahedral geometry has been assigned for Mn(II) and Co(II) complexes, square-planar for Ni(II) whereas tetragonal for Cu(II) complexes. The ligand and its complexes were also evaluated against the growth of bacteria and pathogenic fungi in vitro.