The nitration of some 1-aryl(or benzyl)pyrroles

Nitration of 1-arylpyrroles 1a-c with acetyl nitrate, and 1-arylpyrroles, 1a-e and 1-(2-ethoxycarbonylbenzyl)pyrrole 4 with trifluoroacetyl nitrate gave the corresponding 2-nitro isomers 2a-e and 5, and 3-nitro isomers 3a-e and 6 . 3-Nitropyrroles 3d and 3e were further nitrated with a mixture of nitric and sulfuric acids to give compounds 10, 11 and 12 , respectively. Under the same conditions 1-(2-ethoxycarbonylbenzyl)-3-nitropyrrole 6 gave derivative 13 .     

Solution Equilibria in Trialkyl-Phosphite Derivatives of [Ir4(CO)12]. Crystal Structure of [Ir4(CO)11{P(OCH2)3CEt}]

The monosubstituted [Ir₄(CO)₁₁L] clusters (L = P(OPh)₃, 1 ; L = P(OMe)₃, 2 ; L = P(OCH₂)₃CEt, 3 ) were obtained in good yields by the reaction of [Ir₄(CO)₁₁ I ]^? with the corresponding phosphite. In the solid state, cluster 3 has a C_s geometry with all terminal ligands as shown by an X-ray analysis. Three isomers are present in solution: one with terminal ligands ( A ) and two with three edge-bridging CO's and with L in axial ( B ) or radial ( C ) position (see Scheme). The thermodynamic and kinetic parameters of isomerisations B ? A and A ? C were determined by simulation of the variable-temperature ³¹P-NMR spectra. The three isomers correspond to three minima on the kinetic pathway of CO scrambling, whose relative energies vary independently within a small range (1–9 kJ mol^?1 at 298 K). At low temperature, isomer C is always the least stable and is not observed for 1 which bears the most bulky phosphite ligand. The isomerisations are due to two intramolecular merry-go-rounds of CO groups about two unequivalent faces of the unbridged species A .     

Synthesis of N-aminopyrazoles by Fe(II)-catalyzed rearrangement of 4-hydrazonomethyl-substituted isoxazoles

A novel effective method is reported for the preparation of 1-amino-1H-pyrazole-4-carboxylic acid derivatives by Fe(II)-catalyzed rearrangement of isoxazoles having (2,4-dinitrophenylhydrazono)methyl substituent at C4. The reaction proceeds smoothly for both E and Z isomers of 4-(hydrazonomethyl)isoxazoles, and this means it is not necessary to separate mixtures of E/Z-isomers of the hydrazones prepared by reaction of 5-methoxy/pirrolidino-4-carbonylisoxazoles and 2,4-dinitrophenylhydrazine. The rearrangement proceeds via the formation of an aziridine intermediate which can be isolated in certain cases. The 2-nitro group in the synthesized 1-[(2,4-dinitrophenyl)amino]-1H-pyrazole-4-carboxylic esters can be selectively reduced in two steps via acylation of the amino group followed by hydrogenation-deacylation using H₂-Pd/C.     

Synthesis of N-acyl-4-methyl-7(8)nitro-2,3,4,5-tetrahydro-1H-1-5-benzodiazepin-2-ones and their spectral properties

The conditions were studied o f mono- and diacylation of 7(8)-nitro-2, 3, 4, 5-tetrahydro-1H-1, 5-benzodiazepin-2ones. It was found that under mild conditions (lower temperatures, weak acylating agents), the 7-nitro isomers are acylated only at the 5 -position; increase in the temperature or treatment with an active acylating agent gives the 1,5-diacyl derivatives. Under mild conditions the 8-nitro isomer is not acylated, while under more rigorous conditions a mixture of mono- and diacylated products is formed.Translated from Khimiya Geterotsiklicheskikh Soedinenii, Vol. 30, No. 1, pp. 99–105, January, 1994.     

Molecular structures of mononitroanilines and their thermal decomposition products

The molecular structures of 2-nitro, 3-nitro, and 4-nitroaniline and their internal rotational isomers were calculated by anab-initio method using HF/6-31G* basis set. The geometries were influenced by the nitro group's position. The perturbation of the amino group on the nitro group was observed in a 2-nitroaniline isomer having a molecular structure distinct from that of the other two isomers. Among them, 4-nitroaniline is the most stable one. Internal rotation tests of either the nitro or amino group of 3-nitro and 4-nitroaniline indicate that no significant deformations of the phenyl ring occurred after internal rotation; however, the internal rotational isomers of 2-nitroaniline differed from its original structure. Relatively easier internal rotation of the nitro group than the amino group and different C-NO₂ and C-NH₂ bonds indicate the bond-breaking message of nitroanilines. As products of explosives induced by thermal or shock are of interest, five products of 2-nitroaniline were selected to assess their geometries and energies. The above calculations revealed that these products are thermodynamically unfavorable.     

Cationic polymerization of α,β-disubstituted olefins. IV. Stereospecific polymerization of propenyl alkyl ethers catalyzed by BF3·O(C2H5)2 and Al2(SO4)3–H2SO4 complex

The cis- and trans-propenyl alkyl ethers were polymerized by a homogeneous catalyst [BF₃·O(C₂H₅)₂] and a heterogeneous catalyst [Al₂(SO₄)₃–H₂SO₄ complex]. Methyl, ethyl, isopropyl, n-butyl and tert-butyl propenyl ethers were used as monomers. The steric structure of the polymers formed depended on the geometric structures of monomer and the polymerization conditions. In polymerizations with BF₃·O(C₂H₅)₂ at ?78°C., trans isomers produced crystalline polymers, but cis isomers formed amorphous ones except for tert-butyl propenyl ether. On the other hand, highly crystalline polymers were formed from cis isomers, but not from the trans isomers in the polymerization by Al₂(SO₄)₃–H₂SO₄ complex at 0°C. The x-ray diffraction patterns of the crystalline polymers obtained from the trans isomers were different from those produced from the cis isomers, except for poly(methyl propenyl ether). The reaction mechanism was discussed briefly on these basis of these results.     

Five coordination modes of 4-aminopyrimidine with N-hydroxy-ethylethylenediaminetriacetatoruthenate(II)

Summary The complex [Ru^II(hedta)(4NH₂pym)]⁻, hedta³⁻ = N-hydroxyethylethylenediaminetriacetate, 4NH₂pym = 4-aminopyrimidine, exists at pH 7 as five different coordination isomers, which are most readily distinguished by their electrochemical waves in comparison with the 2-aminopyridine (2NH₂py) complex. The 2NH₂py complex exhibits N(1) (pyridine bound), exo-NH₂ (amine bound) and N(1), NH₂-chelated species. The 4NH₂pym complex forms N(1), exo-amine and N(3), NH₂-chelated isomers analogues to the 2NH₂py species, but also engages in η² (olefin bound) coordination of the dearomatized 4NH₂pym ring in C(5)–C(6), and another η² type of complex involving electron density between N(1) and N(3) of the ring (η³ form). N(1), η² and η³ isomers have also been detected for unsubstituted pyrimidine (pym), 4-methylprimidine (4CH₃pym) and 2-aminopyrimidine (2NH₂pym). Electrochemical waves (V versus NHE) for the five isomers are assigned as follows: (Ru^II/III) exo-NH₂ (0.06 V), N(1) (0.29 V), η² (0.49 V); (Ru^II/III) η³ (0.76 V); N(3), NH₂-chelated (1.09 V).     

Zur Kenntnis der Sulfito-kobalt(III)-Ammine. II. [CoSO3NCS(NH3)4] und [CoSO3SCN(NH3)4]

Sulphito Cobalt(III) Ammines. II. [CoSO₃NCS(NH₃)₄] and [CoSO₃SCN(NH₃)₄] The brown complex [CoSO₃NCS(NH₃)₄] · 2 H₂O formed from aqueous solutions contains N-bonded thiocyanate as concluded from his IR spectrum. After dehydration the red complex [CoSO₃SCN(NH₃)₄] containing S-bonded thiocyanate has been formed. The conversion of the two isomers is favoured by the trans effect of the sulphito group.     

Distribution of ligands in polynuclear palladium complexes: DFT study of isomerism of Pd4(L)4(RCO2)4 (L = CO,CH2, NO) complexes

Structural isomerism of the Pd₄(L)₄(RCO₂)₄ (L = CO, CH₂, NO; R = CC1₃, CF₃, CH₃) complexes was studied in the framework of the density functional theory (DFT). Among the Pd₄(CO)₄(RCO₂)₄ and Pd₄(CH₂)4(RCO₂)₄ complexes the most stable were the isomers with alternate coordination of pairs of carbonyl and carboxylate ligands on the sides of a planar rectangular metal core. The isomers with the pairwise coordination of NO/RCO₂ on one side of the metal core are the most stable between the Pd₄(NO)₄(RCO₂)₄ complexes. The features of mutual coordination of ligands in polynuclear complexes of palladium are clarified using the obtained results.

     

4-Substituted 5-nitroisoquinolin-1-ones from intramolecular Pd-catalysed reaction of N-(2-alkenyl)-2-halo-3-nitrobenzamides

4-Methyl- and 4-benzyl-5-aminoisoquinolin-1-ones are close analogues of the water-soluble PARP-1 inhibitor 5-AIQ. Their synthesis was approached through Pd-catalysed cyclisations of N-(2-alkenyl)-2-iodo-3-nitrobenzamides. Reaction of N,N-diallyl-2-iodo-3-nitrobenzamide with Pd(PPh₃)₄ gave a mixture of 2-allyl-4-methyl-5-nitroisoquinolin-1-one and 2-allyl-4-methylene-5-nitro-3,4-dihydroisoquinolin-1-one. N-Benzhydryl-N-cinnamyl-2-iodo-3-nitrobenzamide similarly gave 2-benzhydryl-4-benzyl-5-nitroisoquinolin-1-one and 2-benzhydryl-4-benzylidene-5-nitro-3,4-dihydroisoquinolin-1-one. The isomeric products are not interconvertible. A deuterium-labelling study indicated that the isomers were formed by different pathways: a π-allyl-Pd route and the classical Heck route. The corresponding secondary amides N-allyl-2-iodo-3-nitrobenzamide and N-((substituted)-cinnamyl)-2-iodo-3-nitrobenzamide gave good yields of the required 4-methyl- and 4-((substituted)-benzyl)-5-nitroisoquinolin-1-ones, respectively, under optimised conditions (Pd(PPh₃)₄, Et₃N, Bu₄NCl, 150 °C, rapid heating). Hydrogenation of the nitro groups gave 4-methyl- and 4-benzyl-5-aminoisoquinolin-1-ones, which were potent inhibitors of PARP-1 activity.     

Synthese und Strukturbestimmung von (i-Pr)2NB(t-BuP)3 und (i-Pr)2NB(t-BuP)4

Synthesis and Structure Analysis of (i-Pr)₂NB(t-BuP)₃ and (i-Pr)₂NB(t-BuP)₄ The diphosphide K(t-Bu)P-(t-BuP)₂-P(t-Bu)K obtained by the cleavage reaction of the 3-membered ring system (i-Pr)₂BN(t-BuP)₂ with potassium reacts with t-BuPCl₂ at ?78°C under ring expansion to form the P₃B ring system (i-Pr)₂NB(t-BuP)₃ – 1,2,3-tri-t-butyl-tri-phospha-4-diisopropyl-aminoboretane ( 1 ). – The 5-membered P₄B ring system (i-Pr)₂NB(t-BuP)₄ – 1,2,3,4-tetra-t-butyl-tetraphospha-5-diisopropylaminoborolidine, ( 2 ) – is formed from K(t-Bu)P? (t-BuP)₂? P(t-Bu)K and (i-Pr)₂NBCl₂ analogous to the above reaction. 1 and 2 could be obtained in a pure form and characterized NMR spectroscopically and by X-ray structure analysis. 1 shows at 200 K two conformation isomers; for 2 ³¹P-^10,11B-isotopic shifts could be identified.     

Beiträge zur Chemie des Phosphors. 72. Über die Alkyl-cyclomonocarba-phosphane (PR)4CH2, R = CH3, C2H5, t-C4H9

Contributions to the Chemistry of Phosphorus. 72. About the Alkyl Cyclomonocarba Phosphanes (PR)₄CH₂, R = CH₃, C₂H₅, t-C₄H₉ The alkyl-substituted cyclomonocarbaphosphanes (PR)₄CH₂ (R = CH₃ 1 , C₂H₅ 2 , t-C₄H₉ 3 ) are obtained in very good yield by the reaction of the corresponding dipotassium alkylphosphides K₂(PR)_n (n = 2, 3, 4) with methylene chloride. Besides, small amounts of the homocyclic rings characteristic for the given substituent and of the five-membered cyclodicarbaphosphanes (PR)₃(CH₂)₂ with isolated CH₂ groups are formed. For the alkylcyclomonocarbaphosphanes 1 and 2 , configuration isomers could be identified for the first time. The “all-trans” forms are always predominant; the relative amounts of the other isomers decrease strongly with increasing number of cis relationships between the substituents at adjacent phosphorus atoms. The ³¹P n.m.r. parameters for three of the all together six isomers of 1 distinguishable by n.m.r. spectrometry and for the “all-trans” isomers of 2 and 3 are reported and discussed. A definite separation is possible between substituent and configuration influence on the chemical shifts as well as on the coupling constants.     

Silylation as a protective method in acetylene chemistry. : Syntheses in the polyeneyne series,R3Si(CC)n(CHCH)4(CC)nSiR3 and H(CC)n(CHCH)4(CC)nH (n = 1, 2)

The Grignard reagents R₃Si(CC)_nMgBr (R = Me, n = 1; R = Et, n = 1,2) couple with cyclooctatetraene dibromide 1 in THF to give, as major products, the silyl-stabilised E, Z, Z, E-polyeneynes, Me₃SiCC(CHCH)₄CCSiMe₃3a, Et₃SiCC(CHCH)₄CCSiEt₃4a and Et₃Si(CC)₂(CHCH)₄(CC)₂SiEt₃6a together with minor proportions of configurational isomers Z, E, Z, Z 3c, all -E 3b, 4b, 6b and compounds in which a bicyclo-octadiene structure 2, 5 and 7 is retained. Irradiation converts the cis(Z)-rich isomers e.g. 3c into the all-trans(E) products. Treatment of the bissilyl compounds 3, 4 and 6 with aqueous base liberates the respective parent polyeneynes, H(CC)_n(CHCH)₄(CC)_nH, in each case.     

Separation,structural determination and biological evaluation of the thymidylate synthase inhibitor 3,3-Di-(4′-hydroxyphenyl)-6(7)-chloro-1-oxo-1H,3H-naphtho[1,8-cd]pyran

The chloro substituted 3,3-di-(4′-hydroxyphenyl)-1-oxo-1H,3H-naphtho[1,8-cd]pyran was synthesized in a 40/60 mixture of C₆ or C₇ substituted isomers, respectively. The two isomers were separated by hplc. The X-ray crystal structure of the mixture was obtained. Both the mixture and the single isomers were tested against Lactobacillus Casei thymidylate synthase. The X-ray analysis clearly revealed co-crystallization of the two isomeric species. The apparent Ki of the mixture was 0.8 muM, while those of the C₆ and C₇ substituted isomers were 0.42 and 0.52 muM, respectively, thus showing that the position of the chlorine in the naphthalene ring was not critical for enzymatic activity.     

Synthesis and Reactivity of Fusion Product of 2-Methylthiazole Fragment to 2-(Furan-2-yl)benzimidazole

Reaction of 1,2-diamino-4-nitrobenzene with furan-2-carbaldehyde in the presence of copper sulfate afforded 2-(furan-2-yl)-5(6)-nitro-1H-benzimidazole. Its N-methylation provided 1-methyl-5(6)-nitro isomers. After reduction of isomers with tin in conc. HCl a pure 3-methyl-2-(furan-2-yl)benzimidazol-5-amine was obtained. The condensation of this amine with acetic anhydride led to the formation of N-[3-methyl-2-(furan-2-yl)benzimidazol-5-yl]acetamide whose treatment with excess P₂S₅ in anhydrous pyridine resulted in the corresponding thioamide. The latter was oxidized with K₃[Fe(CN)₆] in alkaline environment to obtain 2,8-dimethyl-7-(furan-2-yl)-8H-imidazo[4,5-g][1,3]benzothiazole. Its reactions of electrophilic substitution were studied: nitration, bromination, sulfonation, formylation, acylation. The substituent is introduced exclusively in the position 5 of the furan ring.     

Physicochemical studies of a new series of aryloxide complexes,Na2[Co(OAr)4].nTHF

Summary By the interaction of anhydrous CoBr₂ or CoBr₂·2THF with different sodium aryloxides, a new series of complexes of general formula Na₂[Co(OAr)₄]·nTHF (OAr =o-nitro,o-chloro,o-bromo,m-chloro,p-bromo, 2,4-dichloro, 2,6-dichloro, or 2,4-dimethylphenoxide;n = 1, 3, 4 or 5) were prepared and characterized by physicochemical means. The electronic spectra and magnetic measurements suggest a tetrahedral geometry for cobalt(II). Heating the complexes led to reversible loss of THF with an accompanying colour change.     

Five-coordinate pentafluorobenzothiolate osmium(IV) complexes [Os(SC6F5)4(P(C6H4X-4)3)] (X = OCH3, CH3, F, Cl or CF3): Solid and solution structural characterization

The reactions of OsO₄ with excess of HSC₆F₅ and P(C₆H₄X-4)₃ in ethanol afford the five-coordinate compounds [Os(SC₆F₅)₄(P(C₆H₄X-4)₃)] where X = OCH₃ 1a and 1b, CH₃ 2a and 2b, F 3a and 3b, Cl 4a and 4b or CF₃ 5a and 5b. Single crystal X-ray diffraction studies of 1 to 5 exhibit a common pattern with an osmium center in a trigonal-bipyramidal coordination arrangement. The axial positions are occupied by mutually trans thiolate and phosphane ligands, while the remaining three equatorial positions are occupied by three thiolate ligands. The three pentafluorophenyl rings of the equatorial ligands are directed upwards, away from the axial phosphane ligand in the arrangement “3-up” (isomers a). On the other hand, ³¹P{¹H} and ¹⁹F NMR studies at room temperature reveal the presence of two isomers in solution: The “3-up” isomer (a) with the three C₆F₅-rings of the equatorial ligands directed towards the axial thiolate ligand, and the “2-up, 1-down” isomer (b) with two C₆F₅-rings of the equatorial ligands directed towards the axial thiolate and the C₆F₅-ring of the third equatorial ligand directed towards the axial phosphane. Bidimensional ¹⁹F–¹⁹F NMR studies encompass the two sub-spectra for the isomers a (“3-up”) and b (“2-up, 1-down”). Variable temperature ¹⁹F NMR experiments showed that these isomers are fluxional. Thus, the ¹⁹F NMR sub-spectra for the “2-up, 1-down” isomers (b) at room temperature indicate that the two S-C₆F₅ ligands in the 2-up equatorial positions have restricted rotation about their C–S bonds, but this rotation becomes free as the temperature increases. Room temperature ¹⁹F NMR spectra of 3 and 5 also indicate restricted rotation around the Os–P bonds in the “2-up, 1-down” isomers (b). In addition, as the temperature increases, the ¹⁹F NMR spectra tend to be consistent with an increased rate of the isomeric exchange. Variable temperature ³¹P{¹H} NMR studies also confirm that, as the temperature is increased, the a and b isomeric exchange becomes fast on the NMR time scale.     

Bildung und struktur der Cyclophosphane P4(CMe3)2[P(CMe3)2]2 und P4(SiMe3)2[P(CMe3)2]2

Formation and Structure of the Cyclophosphanes P₄(CMe₃)₂[P(CMe₃)₂]₂ and P₄(SiMe₃)₂[P(CMe₃)₂]₂ n-Triphosphanes showing a SiMe₃ and a Cl substituent at the atoms P¹ and P², like (Me₃C)₂P? P(SiMe₃)? P(CMe₃)Cl 3 or (Me₃C)₂P? P(Cl)? P(SiMe₃)₂ 4 are stable only at temperatures below ?30°C. Above this temperature these compounds lose Me₃SiCl, thus forming cyclotetraphosphanes, P₄(CMe₃)₂[P(CMe₃)₂]₂ 1 out of 3 , P₄(SiMe₃)₂[P(SiMe₃)₂]₂ 2a (cis) and 2b (trans) out of 4 . The formation of 1 proceeds via (Me₃C)₂P? P?PCMe₃ 5 as intermediate compound, which after addition to cyclopentadiene to give the Diels-Alder-adduct 6 (exo and endo isomers) was isolated. 6 generates 5 , which then forms the dimer compound 1 . Likewise (Me₃C)₂P? P?P-SiMe₃ 8 (as proven by the adduct 7 ) is formed out of 4 , leading to 2a (cis) and 2b (trans). Compound 1 is also formed out of the iso-tetraphosphane P[P(CMe₃)₂]₂[P(CMe₃)Cl] 9 , which loses P(CMe₃)₂Cl when warmed to a temperature of 20°C. 1 crystallizes monoclinically in the space group P2₁/a (no. 14); a = 1762.0(15) pm; b = 1687.2(18) pm; c = 1170.5(9) pm; β = 109.18(5)° and Z = 4 formula units in the elementary cell. The molecule possesses E conformation. The central four-membered ring is puckered (approx. symmetry 4 2m; dihedral angle 47.4°), thus bringing the substituents into a quasi equatorial position and the nonbonding electron pairs into a quasi axial position. The bond lengths in the four-membered ring of 1 (d (P? P) = 222.9 pm) are only slightly longer than the exocyclic bonds (221.8 pm). The endocyclic bond angles \documentclass{article}\pagestyle{empty}\begin{document}$ \bar \beta $\end{document}(P/P/P) are 85.0°, the torsion angles are ±33° and d (P? C) = 189.7 pm.     

Crystallographic characterization of three cathinone hydrochlorides new on the NPS market: 1-(4-methylphenyl)-2-(pyrrolidin-1-yl)hexan-1-one (4-MPHP), 4-methyl-1-phenyl-2-(pyrrolidin-1-yl)pentan-1-one (α-PiHP) and 2-(methylamino)-1-(4-methylphenyl)pentan-1-one (4-MPD)

Cathinones belong to a group of compounds of great interest in the new psychoactive substances (NPS) market. Constant changes to the chemical structure made by the producers of these compounds require a quick reaction from analytical laboratories in ascertaining their characteristics. In this article, three cathinone derivatives were characterized by X-ray crystallography. The investigated compounds were confirmed as: 1-[1-(4-methylphenyl)-1-oxohexan-2-yl]pyrrolidin-1-ium chloride ( 1 , C₁₇H₂₆NO⁺·Cl^?, the hydrochloride of 4-MPHP), 1-(4-methyl-1-oxo-1-phenylpentan-2-yl)pyrrolidin-1-ium chloride ( 2 ; C₁₆H₂₄NO⁺·Cl^?, the hydrochloride of α-PiHP) and methyl[1-(4-methylphenyl)-1-oxopentan-2-yl]azanium chloride ( 3 ; C₁₃H₂₀NO⁺·Cl^?, the hydrochloride of 4-MPD). All the salts crystallize in a monoclinic space group: 1 and 2 in P2₁/c, and 3 in P2₁/n. To the best of our knowledge, this study provides the first detailed and comprehensive crystallographic data on salts 1 – 3 .     

Dioxomolybdenum(VI) complexes containing 1-alkyl-2-ethyl-3-hydroxy-4-pyridin-4(1H)-ones

Dioxomolybdenum(VI) complexes derived from ethyl maltol (2-ethyl-3-hydroxy-4-pyrone) and 1-alkyl-2-ethyl-3-hydroxy-4-pyridin-4(1H)-ones have been prepared and characterized using physical methods including ¹H- and ¹³C-n.m.r. spectroscopy, i.r., elemental analysis, and X-ray diffraction for the pyrone and 3-methylpyridine pyridinone derivatives. The octahedral complexes have the general formula cis-MoO₂L₂ where L = the deprotonated pyrone or pyridinone ligand.