Syntheses of ladder-type oligonaphthalene derivatives and their photophysical and electrochemical properties

Ladder-type oligophenylene derivatives are important compounds for light-emitting devices. However, the closely related ladder-type oligonaphthalene derivatives have received little attention due to the lack of synthetic accessibility. We hereby report the syntheses of these novel conjugated systems by means of an intramolecular cationic cyclization protocol. Utilizing a one-pot-multiple-component reaction, the acyclic precursors to these ladder-type oligomers up to pentamer can be synthesized from small fragments in just two or three steps. Photophysical and electrochemical studies revealed that the electron delocalization in these compounds is considerably enhanced relative to that found in the regular unplanarized oligonaphthalene derivatives. However, such an effect is much weaker than that found in fully planar rylene derivatives.     

α,α′‐Diarylacenaphtho[1,2‐c]phosphole P‐Oxides: Divergent Synthesis and Application to Cathode Buffer Layers in Organic Photovoltaics

A divergent method for the synthesis of α,α′‐diarylacenaphtho[1,2‐c]phosphole P‐oxides has been established; α,α′‐dibromoacenaphtho[c]phosphole P‐oxide, which was prepared through a Ti^II‐mediated cyclization of 1,8‐bis(trimethylsilylethynyl)naphthalene, underwent a Stille coupling with three different kinds of aryltributylstannanes to afford the α,α′‐diarylacenaphtho[c]phosphole P‐oxides in moderate to good yields. X‐ray crystallographic analyses and UV/Vis absorption/fluorescence measurements have revealed that the degree of π‐conjugation, the packing motif, the electron‐accepting ability, and the thermal stability of the acenaphtho[c]phosphole π‐systems are finely tunable with the α‐aryl substituents. All the P?O and P?S derivatives exhibited high stability in their electrochemically reduced state. To use this class of arene‐fused phosphole π‐systems as n‐type semiconducting materials, we evaluated device performances of the bulk heterojunction organic photovoltaics (OPV) that consist of poly(3‐hexylthiophene), an indene‐C₇₀ bisadduct, and a cathode buffer layer. The insertion of the diarylacenaphtho[c]phosphole P‐oxides as the buffer layer was found to improve the power conversion efficiency of the polymer‐based OPV devices.     

Electronic and optical properties of ladder-type heteraborins

Ladder-type pi-conjugated molecules bearing heteraborin (azaborine or thiaborin) units were synthesized, and X-ray crystallographic analysis of pentacene-type molecules showed that these molecules have rigid and planar structures. UV-visible spectroscopy and theoretical calculations revealed the enhancement of electronic interaction between heteraborin units, the decrease in HOMO-LUMO energy gaps, and the strong effect of the bridging main-group elements (nitrogen or sulfur) on the electronic states. The ladder-type molecules emitted strong fluorescence both in solution and in the solid state, and the emission-band shapes were different from each other, indicating the existence of intermolecular interactions in the solid state. Complex formation of the ladder molecules with fluoride ion was monitored by UV-visible spectroscopy, which revealed that the Lewis acidity of these molecules can be controlled by the elongation of pi systems and the change of the bridging main-group elements.     

On the bond-stretch isomerism in the benzo[1,2:4,5]dicyclobutadiene system--an ab initio MR-AQCC study.

Bond-stretch isomerism in benzo[1,2:4,5]dicyclobutadienle (BDCB) has been investigated using the MR-AQCC/6-31G(d) method, a high-level multireference ab initio approach including size-extensivity corrections. The applied theoretical approach includes both nondynamical and dynamical electron correlation effects. Full MR-AQCC geometry optimizations of localized (1) and delocalized (3) isomers as well as the transition structure (TS) have been determined using D2h, symmetry restriction. The calculations show that both isomers are approximately of equal stability separated by a barrier with a height of about 5 kcal mol(-1). Thus, the present results strongly indicate that benzof[1,3:4,5]dicyclobutadiene is a very good candidate for an organic compound exhibiting bond-stretch isomerism, since isomers 1 and 3 correspond to true minima on the double-well potential energy surface, which are separated by a sufficiently high barrier. It is particularly important to emphasize that isomer 3 represents a realization of the highly elusive quasi-[10]annulene.     

Superstructure-dependent optical and electrical properties of an unusual face-to-face, pi-stacked, one-dimensional assembly of dehydrobenzo[12]annulene in the crystalline state

To develop a novel pi-conjugated molecule-based supramolecular assembly, we designed and synthesized trisdehydrotribenzo[12]annulene ([12]DBA) derivative 2 with three carboxyl groups at the periphery. Recrystallization of 2 from DMSO gave a crystal of the solvate 23 DMSO. Crystallographic analysis revealed, to our surprise, that a face-to-face pi-stacked one-dimensional (1D) assembly of 2 was achieved and that the DMSO molecule played a significant role as a "structure-dominant element" in the crystal. This is the first example of [12]DBA to stack completely orthogonal to the columnar axis. To reveal its superstructure-dependent optical and electrical properties, 2 and its parent molecule 1, which crystallizes in a herringbone fashion, were subjected to fluorescence spectroscopic analysis and charge-carrier mobility measurements in crystalline states. The 1D stacked structure of 2 provides a red-shifted, broadened, weakened fluorescence profile (lambda(max) = 545 nm, phi(F) = 0.01), compared to 1 (lambda(max) = 491 nm, phi(F) = 0.12), due to strong interactions between the p orbitals of the stacked molecules. The charge-carrier mobility of the single crystal of 23 DMSO, as well as 1, was determined by flash photolysis time-resolved microwave conductivity (FP-TRMC) measurements. The single crystal of 23 DMSO revealed significantly-anisotropic charge mobility (sigma(mu) = 1.5x10(-1) cm(2) V(-1) s(-1)) along the columnar axis (crystallographic c axis). This value is 12 times larger than that along the orthogonal axis (the a axis).     

π‐Extended Indenofluorenes

A series of π‐extended aromatic indenofluorene (IF) analogues with naphthalene and anthracene cores have been synthesized through acid‐catalyzed intramolecular cyclization. The regioselectivity of the reaction is controlled by a combination of steric and electronic factors and in some cases several possible regioisomers have resulted from the same precursor. The effects of ring connectivity on the optoelectronic properties were investigated by DFT calculations, absorption/emission spectroscopy, cyclic voltammetry, and spectroelectrochemical studies. All regioisomers exhibited a redshift of their absorption/emission bands relative to the parent IF analogues, but the magnitude of this shift and other optoelectronic properties (luminescence quantum yield, etc.) depends on the ring connectivity in a less obvious manner.     

Conformationally controlled electron delocalization in n-type rods: synthesis, structure, and optical, electrochemical, and spectroelectrochemical properties of dicyanocyclophanes

A series of dicyanobiphenylcyclophanes 1-6 with various π-backbone conformations and characteristic n-type semiconductor properties is presented. Their synthesis, optical, structural, electrochemical, spectroelectrochemical, and packing properties are investigated. The X-ray crystal structures of all n-type rods allow the systematic correlation of structural features with physical properties. In addition, the results are supported by quantum mechanical calculations based on density functional theory. A two-step reduction process is observed for all n-type rods, in which the first step is reversible. The potential gap between the reduction processes depends linearly on the cos(2) value of the torsion angle φ between the π-systems. Similarly, optical absorption spectroscopy shows that the vertical excitation energy of the conjugation band correlates with the cos(2) value of the torsion angle φ. These correlations demonstrate that the fixed intramolecular torsion angle φ is the dominant factor determining the extent of electron delocalization in these model compounds, and that the angle φ measured in the solid-state structure is a good proxy for the molecular conformation in solution. Spectroelectrochemical investigations demonstrate that conformational rigidity is maintained even in the radical anion form. In particular, the absorption bands corresponding to the SOMO-LUMO+i transitions are shifted bathochromically, whereas the absorption bands corresponding to the HOMO-SOMO transition are shifted hypsochromically with increasing torsion angle φ.     

Asymmetrical Fluorene[2,3‐b]benzo[d]thiophene Derivatives: Synthesis,Solid‐State Structures,and Application in Solution‐Processable Organic Light‐Emitting Diodes

A series of novel asymmetrical fused compounds containing the backbone of fluorene[2,3‐b]benzo[d]thiophene (FBT) were effectively synthesized and fully characterized. Single‐crystal X‐ray studies demonstrated that the length of the substituent side chains greatly affects the solid‐state packing of the obtained fused compounds. DFT, photophysical, and electrochemical studies all showed that the FBTs have large band gaps, low‐lying HOMO energy levels, and therefore good stability toward oxidation. Moreover, the substituents strongly influence the fluorescence properties of the resulting FBT derivatives. The di‐n‐hexyl compound exhibits intense fluorescence in solution with the highest quantum yield of up to 91 %. Solution‐processed green phosphorescent organic light‐emitting diodes with the di‐n‐butyl derivative as the host material exhibited a maximum brightness of 14 185 cd m^?2 and a luminescence efficiency of 12 cd A^?1.     

Synthesis and Structural Data of Tetrabenzo[8]circulene

In 1976, the first attempted synthesis of the saddle‐shaped molecule [8]circulene was reported. The next 37 years produced no advancement towards the construction of this complicated molecule. But remarkably, over the last six months, a flurry of progress has been made with two groups reporting independent and strikingly different strategies for the synthesis of [8]circulene derivatives. Herein, we present a third synthetic method, in which we target tetrabenzo[8]circulene. Our approach employs a Diels–Alder reaction and a palladium‐catalyzed arylation reaction as the key steps. Despite calculations describing the instability of [8]circulene, coupled with the reported instability of synthesized derivatives of the parent molecule, the addition of four fused benzenoid rings around the periphery of the molecule provides a highly stable structure. This increased stability over the parent [8]circulene was predicted by using Clar’s theory of aromatic sextets and is a result of the compound becoming fully benzenoid upon incorporation of these additional rings. The synthesized compound exhibits remarkable stability under ambient conditions—even at elevated temperatures—with no signs of decomposition over several months. The solid‐state structure of this compound is significantly twisted compared to the calculated structure primarily as a result of crystal‐packing forces in the solid state. Despite this contortion from the lowest‐energy structure, a range of structural data is presented confirming the presence of localized aromaticity in this large polycyclic aromatic hydrocarbon.     

Synthesis of a Tetrabenzotetraaza[8]circulene by a “Fold‐In” Oxidative Fusion Reaction

Tetrabenzotetraaza[8]circulene ( 1 ) has been synthesized in good yield by a “fold‐in” oxidative fusion reaction of a 1,2‐phenylene‐bridged cyclic tetrapyrrole. X‐ray diffraction analysis of 1 has revealed a planar square structure with a central cyclooctatetraene (COT) core that shows little alternation of the bond lengths. Despite these structural features, 1 shows aromatic‐like character, such as sharp absorption bands, high fluorescence quantum yields (Φ_F=0.55 in THF), and a single exponential fluorescence decay with τ_F=3.8 ns. These observations indicate a dominant contribution of an [8]radialene‐like π conjugation and hence aromatic character of the local aromatic segments in 1 .     

Synthesis and photophysical properties of benzo[c]thiophene,p-phenylene-, triphenylamine-, and pyrene-based vinylenes

An efficient synthesis of benzo[c]thiophenyl/p-phenylenyl/pyrenyl phosphonate esters has been achieved using ZnBr₂-catalyzed Michaelis–Arbuzov reaction of corresponding benzyl alcohol/bromides at room temperature. Horner–Wadsworth–Emmons reaction of the phosphonate esters with aryl/heteroaryl aldehydes in the presence of t-BuOK furnished the vinylenes in good yields. The absorption and emission characteristics of the synthesized vinylenes were also reported.     

Synthesis,Crystal Packing,and Ambipolar Carrier Transport Property of Twisted Dibenzo[g,p]chrysenes

A versatile method for the synthesis of dibenzo[g,p]chrysene (DBC) derivatives based on regio‐ and stereoselective stannyllithiation to diarylacetylenes is described. This method affords a variety of DBCs possessing both electron‐donating and electron‐withdrawing functional groups. These twisted molecules take brickwork packing structures in single crystals. Thus, ambipolar carrier transport properties with mobility values of up to 10^?3 cm² V^?1 s^?1 in the amorphous state were achieved. Functional groups on DBC frameworks are considered to increase carrier mobility through the enhancement of intermolecular interactions in the brickwork packing structures.     

From pentalene to dicyclopenta[b,g]naphthalene, or the change towards delocalized structures.

Using triples-corrected coupled-cluster methods as well as other high-level theoretical approximations, the optimized parameters and isomerization barriers of the family of compounds cyclopentadiene-(benzene)x-cyclopentadiene (x = 0, 1, 2) are computed. In contrast to previous studies, s-indacene presents a localized C(2h) geometry. Also, the localized structure of pentalene is found to be the most stable, but when two benzene rings are intercalated between the five-member rings of pentalene, the resulting molecule preferably adopts a delocalized D(2h) conformation.     

FeCl3‐Mediated Three‐Component Cascade Reaction: An Effective Approach to the Construction of Highly Functionalized Pyrrolo[1,2‐c]quinazolinones

An unexpected FeCl₃‐mediated three‐component cascade reaction has been used to construct structurally diverse pyrrolo[1,2‐c]quinazolinone derivatives with potential biological activities. This method has advantages of mild conditions, simple work‐up, as well as wide substrate scope, which makes it a powerful approach to the synthesis of diverse pyrrolo[1,2‐c]quinazolinones. This cascade reaction involves 1,3‐dipolar cycloaddition between azomethine ylides and allenoates, followed by intramolecular nucleophilic addition in the presence of FeCl₃. The obtained products could be easily transformed into derivatives with the pyrrolo[2,3‐c]quinazoline alkaloid skeleton.