An insight into the effect of composition for enhance catalytic performance of biogenic Au/Ag bimetallic nanoparticles

A comprehensive knowledge of composition‐activity property relationship of nanoparticulate materials is highly desirable for applications in various catalysis reactions. We have addressed a facile green aqueous approach for preparation of Au, Ag monometallic, Au/Ag alloy as well as core‐shell bimetallic nanoparticles. The phytochemicals present in lemon grass leaves extract were employed both as natural reducing and capping agents at room temperature. X‐ray diffraction pattern, UV‐Vis spectroscopy, and energy dispersive X‐ray studies confirmed the formation of bimetallic system. The ensuing Au core/Ag shell and Au/Ag alloy bimetallic nanoparticles were crystalline and spherical in nature with identical average diameter of ~ 18 nm as measured via transmission electron microscopy. The bimetallic systems incredibly display higher catalytic potential than their monometallic counterparts which were vividly reckoned on structural effect, lattice compression, and synergistic electronic effect.     

Fabrication of surface‐enhanced Raman scattering‐active ZnO/Ag composite microspheres

We show in this paper how zinc oxide (ZnO)/silver (Ag) composite microspheres can be prepared by the reduction of Ag(NH₃)₂⁺ with the reducing agent formaldehyde in aqueous solution on the surface of ZnO microspheres. During the preparation, Sn²⁺ was absorbed on the surface of ZnO microspheres for sensitization and activation, and then Ag(NH₃)₂⁺ was reduced to Ag nanoparticles by the reducing agent to obtain ZnO/Ag composite microspheres. SEM and TEM images revealed silver nanoparticles with a diameter ranging from tens to 100 nm. X‐Ray photoelectron spectra (XPS), X‐ray diffraction (XRD) patterns and UV‐vis spectra were used to characterize the structure of the ZnO/Ag composite microspheres. The origin of the surface‐enhanced Raman scattering properties was traced to the surface of the ZnO/Ag composite microspheres. The enhancement factor was estimated in detail, and the enhancement mechanism for the SERS effect was also investigated. Copyright © 2007 John Wiley & Sons, Ltd.     

Proof‐of‐Concept Studies Directed toward the Formation of Metallic Ag Nanostructures from Ag3PO4 Induced by Electron Beam and Femtosecond Laser

In this work, for the first time, the instantaneous nucleation and growth processes of Ag nanoparticles on Ag₃PO₄ mediated by femtosecond laser pulses are reported and analyzed. The investigated samples are pure Ag₃PO₄ sample, electron‐irradiated Ag₃PO₄ sample, and laser‐irradiated sample. Complete characterization of the samples is performed using X‐ray diffraction (XRD), Rietveld refinements, field emission scanning electron microscopy, and energy dispersive spectroscopy (EDS). XRD confirms that the irradiated surface layer remains crystalline, and according to EDS analysis, the surface particles are composed primarily of Ag nanoparticles. This method not only offers a one‐step route to synthesize Ag nanoparticles using laser‐assisted irradiation with particle size control, but also reports a complex process involving the formation and subsequent growth of Ag nanoparticles through an unexpected additive‐free in situ fabrication process.     

SERS study of Ag nanoparticles electrodeposited on patterned TiO2 nanotube films

In this work, Ag nanoparticles (NPs) were deposited on patterned TiO₂ nanotube films through pulse‐current (PC) electrodeposition, and as a result patterned Ag NPs films were achieved. Scanning electron microscopy (SEM), electron probe microanalysis (EPMA), and X‐ray diffraction (XRD) were used, respectively, to study the morphology, uniformity, and phase structure of the patterned Ag NP films. The size and density of the as‐deposited Ag NPs could be controlled by changing the deposition charge density, and it was found that the patterned Ag NP films produced under a charge density of 2.0 C cm⁻² gave intense UV–vis and Raman peaks. Two‐dimensional surface‐enhanced Raman scattering (SERS) mapping of rhodamine 6G (R6G) on the patterned Ag NP films demonstrated a high‐throughput, localized molecular adsorption and micropatterned SERS effect. Copyright © 2010 John Wiley & Sons, Ltd.     

Single‐cell resolution in high‐resolution synchrotron X‐ray CT imaging with gold nanoparticles

Gold nanoparticles are excellent intracellular markers in X‐ray imaging. Having shown previously the suitability of gold nanoparticles to detect small groups of cells with the synchrotron‐based computed tomography (CT) technique both ex vivo and in vivo, it is now demonstrated that even single‐cell resolution can be obtained in the brain at least ex vivo. Working in a small animal model of malignant brain tumour, the image quality obtained with different imaging modalities was compared. To generate the brain tumour, 1 × 10⁵ C6 glioma cells were loaded with gold nanoparticles and implanted in the right cerebral hemisphere of an adult rat. Raw data were acquired with absorption X‐ray CT followed by a local tomography technique based on synchrotron X‐ray absorption yielding single‐cell resolution. The reconstructed synchrotron X‐ray images were compared with images obtained by small animal magnetic resonance imaging. The presence of gold nanoparticles in the tumour tissue was verified in histological sections.     

Deposition of Ag nanoparticles on porous anodic alumina for surface enhanced Raman scattering substrate

Ag nanoparticles were exclusively deposited inside the pores of the porous anodic alumina (PAA) template through the deposition cycle including the incubation and the subsequent reduction of Ag(NH₃) . Both the density and size of the produced Ag nanoparticles increased as the deposition cycle number increased. A field‐emission scanning electron microscopeand an ultraviolet‐visible spectrometer were applied, respectively, to study the morphology and the extinction spectra of the Ag nanoparticles. The optimum deposition number was found from the scanning electron microscope (SEM) analysis. Surface enhanced Raman scattering (SERS) spectra of p‐aminothiophenol recorded on the Ag–PAA substrates prepared under increasing number of deposition cycles, manifested an enlarging trend of peak intensity. A point‐by‐point SERS mapping of p‐aminothiophenol on the Ag–PAA substrate was acquired to characterise the homogeneity of the substrate. Copyright © 2008 John Wiley & Sons, Ltd.     

Study of interfacial charge transfer in nanosemiconductor–molecule composites

Interaction of sol–gel synthesized Ce–Ag‐codoped ZnO (CSZO) nanocrystals with (E)‐1‐(naphthalen‐1‐yl)‐2‐styryl‐1H‐phenanthro[9,10‐d]imidazole has been analysed. The synthesized nanocrystals and their composites with naphthyl styryl phenanthrimidazole have been characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X‐ray spectroscopy, X‐ray diffractometry, X‐ray photoelectron spectroscopy (XPS) lifetime and Fourier transform infrared spectroscopy and cyclic voltammetry. XPS shows doped silver and cerium in Ag⁰ and Ce⁴⁺ states, respectively_. SEM and TEM images of CSZO nanoparticles show that they appear to be 3D trapezoid and cocoon‐like shape. The selected area electron diffraction pattern supports the nanocrystalline character of the synthesized material. The percentages of doping of cerium and silver in CSZO are 0.54 (at.) and 0.34 (at.), respectively. From the energy levels of the materials used in the imidazole–CSZO composite, the dominant CT direction has been analysed. Theoretical investigation shows that the binding energy and energy gap of the imidazole composites are highly dependent on the nature of the silver oxide cluster and that charge transfer in the imidazole–Ag₄O₄ composite is faster than the same in other composites. Molecular docking technique has also been carried out to understand the imidazole–DNA interactions. Copyright © 2016 John Wiley & Sons, Ltd.     

Raman spectroscopy for the analysis of coal: a review

The advances in the characterization of amorphous carbons by Raman spectroscopy over the last four decades are of interest to many industries, especially those involving the combustion, gasification and pyrolysis of coal. Many researchers report on the Raman character of the natural organic matter in carbon‐containing compounds, such as coal, and relate the Raman bands to the structural order of the amorphous carbons. The basis of most of these studies evolved around the assignment of the G (graphitic, ∼1580 cm⁻¹) band to crystalline graphite and any other bands, called D bands, (disorder, various from 1100 to 1500 cm⁻¹) to any type of structural disorder in the graphitic structure. Concerning coal analysis, the information gained by Raman investigations has been used to describe char evolution as a function of temperature, the presence of catalysts and different gasification conditions. In addition, researchers looked at maturation, grade, doppleritization and many more aspects of interest. One aspect that has, however, not been addressed by most of the researchers is the natural inorganic matter (NIM) in the carbon‐containing compounds. Micro‐Raman spectroscopy (MRS) has many advantages over other characterization tools, i.e. in situ analysis, nondestructive, no sample preparation, low detection limit, micrometer‐scale characterization, versatility and sensitivity to many amorphous compounds. With the distinct advantages it has over that of other molecular characterization tools, such as powder X‐ray diffraction (PXRD), Fourier‐transform infrared spectrometry (FT‐IR) and scanning electron microscopy with X‐ray detection (SEM/EDS), it is surprising that it has not yet been fully exploited up to this point for the characterization of the NIM in coal and other amorphous carbons. This paper reviews the work published on the Raman characterization of the natural organic matter (NOM) of coals and reports on preliminary results of the NIM character of various South African coals, whereby various inorganic compounds and minerals in the coal have been characterized. Copyright © 2010 John Wiley & Sons, Ltd.     

Iron Precursor Decomposition in the Magnesium Combustion Flame: A New Approach for the Synthesis of Particulate Metal Oxide Nanocomposites

Powders of Fe–Mg–O nanocomposite particles have been grown using a novel chemical vapor synthesis approach that employs the decomposition of a metalorganic precursor inside the metal combustion flame. After annealing in controlled gas atmospheres composition distribution functions, structure and phase stability of the obtained magnesiowüstite nanoparticles are measured with a combination of techniques such as inductively coupled plasma‐optical emission spectroscopy, energy dispersive X‐ray spectroscopy, X‐ray diffraction, and scanning and transmission electron microscopy. Complementary Mössbauer spectroscopy measurements reveal that depending on Fe loading and temperature of annealing either metastable and superparamagnetic solid solutions of Fe³⁺ ions in periclase (MgO) or phase separated mixtures of MgO and ferrimagnetic magnesioferrite (MgFe₂O₄) nanoparticles can be obtained. The described combustion technique represents a novel concept for the production of mixed metal oxide nanoparticles. Adressing the impact of selected annealing protocols, this study underlines the great potential of vapor phase grown non‐equilibrium solids, where thermal processing provides means to trigger phase separation and, concomitantly, the emergence of new magnetic properties.     

Suppression of the Verwey Transition by Charge Trapping

The Verwey transition in Fe₃O₄ nanoparticles with a mean diameter of 6.3 nm is suppressed after capping the particles with a 3.5 nm thick shell of SiO₂. By X‐ray absorption spectroscopy and its associated X‐ray magnetic circular dichroism this suppression can be correlated to localized Fe²⁺ states and a reduced double exchange visible in different site‐specific magnetization behavior in high magnetic fields. The results are discussed in terms of charge trapping at defects in the Fe₃O₄/ SiO₂ interface and the consequent difficulties in the formation of the common phases of Fe₃O₄. By comparison to X‐ray absorption spectra of bare Fe₃O₄ nanoparticles in course of the Verwey transition, particular changes in the spectral shape could be correlated to changes in the number of unoccupied d states for Fe ions at different lattice sites. These findings are supported by density functional theory calculations.     

Surface characteristics of Ag‐doped Au nanoparticles probed by Raman scattering spectroscopy

We have examined the surface characteristics of Ag‐doped Au nanoparticles (below 5 mol% of Ag) by means of the surface‐enhanced Raman scattering (SERS) of 2,6‐dimethylphenylisocyanide (2,6‐DMPI) and 4‐nitrobenzenethiol (4‐NBT). When Ag was added to Au to form ∼35‐nm‐sized alloy nanoparticles, the surface plasmon resonance band was blue‐shifted linearly from 523 to 517 nm in proportion to the content of Ag up to 5%. In the SERS spectra of 2,6‐DMPI, the N‐C stretching peak also shifted almost linearly from 2184 to 2174 cm⁻¹ when the Ag content was 5 mol% or less; the peak then remained the same as that of the pure Ag film. The potential variation of the SERS spectrum of 2,6‐DMPI in an electrochemical environment, as well as the effect of organic vapor, also showed a similar tendency. From the SERS of 4‐NBT, we confirmed the occurrence of a surface‐induced photoreaction converting 4‐NBT to 4‐aminobenzenethiol, when Ag was added to Au to form alloy nanoparticles. The photoreaction induction ability also increased linearly with the Ag content, reaching a plateau level at 5 mol% of Ag. All these observations suggest that the surface content of Ag should increase almost linearly as a function of the overall mole fraction of Ag and, once the Au/Ag nanoparticles reach 5 mol% of Ag, their surfaces are fully covered with Ag, showing the same surface characteristics of pure Ag nanoparticles. Copyright © 2011 John Wiley & Sons, Ltd.     

Micro‐EDXRF investigation of Chalcolithic gold ornaments from Portuguese Estremadura

Chalcolithic gold artefacts assigned to the Bell Beaker Culture in Portuguese Estremadura were analysed by micro‐energy dispersive X‐ray fluorescence spectrometry. These high‐status jewels comprise beads of tubular, spiral and double‐conical type, a spiral ring and a wire fragment. The collection is mainly composed of gold with 8.7–16.3 wt% Ag and <0.04 wt% Cu. Additionally, there is a typologically uncommon double‐conical bead showing a lower Ag content (6.7 wt%). The relative intensity of the Ag‐Kα and Ag‐Lα X‐rays from artefacts established the existence of a surface layer depleted in silver, while the reasonable effective penetration depth of the Ag‐Kα (about 25–30 μm) provided suitable results for such high fineness gold alloys. A uniform Au–Ag composition at the joint indicates that the double‐conical bead was made by joining two sheets without solder. Overall, the collection shows a composition that is similar to known Chalcolithic gold in Portuguese Estremadura but different from coeval gold in Southwestern Iberian Peninsula. The distinct compositional pattern of Chalcolithic gold in Portuguese Estremadura seems to be inconsistent with the natural variability of silver content in alluvial deposits of gold in Iberian Peninsula, thus suggesting a continuous use of particular sources and limited exchange of nuggets and jewels with the neighbouring region. Copyright © 2017 John Wiley & Sons, Ltd.     

Encapsulation of SnO2/Sn Nanoparticles into Mesoporous Carbon Nanowires and its Excellent Lithium Storage Properties

A peculiar nanostructure of encapsulation of SnO₂/Sn nanoparticles into mesoporous carbon nanowires (CNWs) has been successfully fabricated by a facile strategy and confirmed by scanning electron microscopy (SEM), transmission electron microscopy (TEM), high‐resolution TEM (HRTEM), X‐ray diffraction (XRD), BET, energy‐dispersive X‐ray (EDX) spectrometer, and X‐ray photoelectron spectroscopy (XPS) characterizations. The 1D mesoporous CNWs effectively accommodate the strain of volume change, prevent the aggregation and pulverization of nanostructured SnO₂/Sn, and facilitate electron and ion transport throughout the electrode. Moreover, the void space surrounding SnO₂/Sn nanoparticles also provides buffer spaces for the volumetric change of SnO₂/Sn during cycling, thus resulting in excellent cycling performance as potential anode materials for lithium‐ion batteries. Even after 499 cycles, a reversible capacity of 949.4 mAh g^?1 is retained at 800 mA g^?1. Its unique architecture should be responsible for the superior electrochemical performance.     

Temperature‐driven directional coalescence of silver nanoparticles

Silver nanoparticles were synthesized with a chemical reduction method in the presence of polyvinylpyrrolidone as stabilizing agent. The thermal stability behavior of the silver nanoparticles was studied in the temperature range from 25 to 700°C. Thermal gravimetric analysis was used to measure the weight loss of the silver nanoparticles. Scanning electron microscopy and high‐resolution transmission electron microscopy were used to observe the morphology and the change in shape of the silver nanoparticles. In situ temperature‐dependent small‐angle X‐ray scattering was used to detect the increase in particle size with temperature. In situ temperature‐dependent X‐ray diffraction was used to characterize the increase in nanocrystal size and the thermal expansion coefficient. The results demonstrate that sequential slow and fast Ostward ripening are the main methods of nanoparticle growth at lower temperatures (<500°C), whereas successive random and directional coalescences are the main methods of nanoparticle growth at higher temperatures (>500°C). A four‐stage model can be used to describe the whole sintering process. The thermal expansion coefficient (2.8 × 10^?5 K^?1) of silver nanoparticles is about 30% larger than that of bulk silver. To our knowledge, the temperature‐driven directional coalescence of silver nanocrystals is reported for the first time. Two possible mechanisms of directional coalescence have been proposed. This study is of importance not only in terms of its fundamental academic interest but also in terms of the thermal stability of silver nanoparticles.     

SERS detection of red organic dyes in Ag‐agar gel

Micro‐Raman spectroscopy has been widely employed in the last few years for the study of artworks, allowing for the characterization of a high class of pictorial materials. However, the detection of organic dyes by conventional Raman spectroscopy is quite difficult, due to the high fluorescence provided by these compounds. Recently, remarkable improvements have been achieved by the introduction of the surface enhanced Raman spectroscopy (SERS) technique for the analysis of organic dyes. In the present work, a new method is presented, based on the use of a SERS probe made of agar‐agar coupled with silver nanoparticles, for a non‐destructive and minimally invasive micro‐extraction of dyes from textiles. Ag‐agar gel has been tested first on textile mock‐ups dyed with alizarin, purpurin and carminic acid. SERS measurements have been performed adopting laser light excitations at 514.5 and 785 nm of a micro‐Raman setup. Highly structured SERS band intensities have been obtained. After having verified the safety of the method by colorimetric, X‐ray fluorescence and attenuated total reflectance Fourier transform infrared techniques, a real case, a pre‐Columbian piece of textile, have been investigated by Ag‐agar gel. This cutting‐edge method offers new possibilities for a sensitive and non‐destructive analysis of fluorescent materials. Copyright © 2012 John Wiley & Sons, Ltd.     

A reaction cell for time‐resolved in situ XAS studies during wet chemical synthesis: the Cu2(OH)3Cl case

The use of in situ time‐resolved dispersive X‐ray absorption spectroscopy (DXAS) to monitor the formation of Cu₂(OH)₃Cl particles in an aqueous solution is reported. The measurements were performed using a dedicated reaction cell, which enabled the evolution of the Cu K‐edge X‐ray absorption near‐edge spectroscopy to be followed during mild chemical synthesis. The formed Cu₂(OH)₃Cl particles were also characterized by synchrotron‐radiation‐excited X‐ray photoelectron spectroscopy, X‐ray diffraction and scanning electron microscopy. The influence of polyvinylpyrrolidone (PVP) on the electronic and structural properties of the formed particles was investigated. The results indicate clearly the formation of Cu₂(OH)₃Cl, with or without the use of PVP, which presents very similar crystalline structures in the long‐range order. However, depending on the reaction, dramatic differences were observed by in situ DXAS in the vicinities of the Cu atoms.     

Defect engineering by synchrotron radiation X‐rays in CeO2 nanocrystals

This work reports an unconventional defect engineering approach using synchrotron‐radiation‐based X‐rays on ceria nanocrystal catalysts of particle sizes 4.4–10.6 nm. The generation of a large number of oxygen‐vacancy defects (OVDs), and therefore an effective reduction of cations, has been found in CeO₂ catalytic materials bombarded by high‐intensity synchrotron X‐ray beams of beam size 1.5 mm × 0.5 mm, photon energies of 5.5–7.8 keV and photon fluxes up to 1.53 × 10¹² photons s^?1. The experimentally observed cation reduction was theoretically explained by a first‐principles formation‐energy calculation for oxygen vacancy defects. The results clearly indicate that OVD formation is mainly a result of X‐ray‐excited core holes that give rise to valence holes through electron down conversion in the material. Thermal annealing and subvalent Y‐doping were also employed to modulate the efficiency of oxygen escape, providing extra control on the X‐ray‐induced OVD generating process. Both the core‐hole‐dominated bond breaking and oxygen escape mechanisms play pivotal roles for efficient OVD formation. This X‐ray irradiation approach, as an alternative defect engineering method, can be applied to a wide variety of nanostructured materials for physical‐property modification.     

Nanostructured thin films as surface‐enhanced Raman scattering substrates

Nanoporous thin films with silver nanoparticles were synthesized with a bottom–up approach, and its potential as effective surface‐enhanced Raman scattering (SERS) substrates was demonstrated. The use of mesoporous titania films as substrates allowed to control the growth of nanoparticles on the film surface. Atomic force microscopy measurements, Ultraviolet‐visible and X‐ray diffraction analysis confirmed the photoreduction of Ag⁺ to Ag⁰ with the formation of nanoparticles with crystallite dimensions of 32 to 36 nm. The new substrates allowed the detection of two analytes (rhodamine B isothiocyanate and cytochrome c), present in solutions at very low concentrations, highlighting their potential in SERS sensing. Reproducibility, homogeneity, enhancement factor of the substrate, consistency of results and detection limits were also assessed. Copyright © 2012 John Wiley & Sons, Ltd.     

Humic acid metal cation interaction studied by spectromicroscopy techniques in combination with quantum chemical calculations

Humic acids (HA) have a high binding capacity towards traces of toxic metal cations, thus affecting their transport in aquatic systems. Eu(III)–HA aggregates are studied by synchrotron‐based scanning transmission X‐ray microscopy (STXM) at the carbon K‐edge and laser scanning luminescence microscopy (LSLM) at the ⁵D₀→⁷F_1,2 fluorescence emission lines. Both methods provide the necessary spatial resolution in the sub‐micrometre range to resolve characteristic aggregate morphologies: optically dense zones embedded in a matrix of less dense material in STXM images correspond to areas with increased Eu(III) luminescence yield in the LSLM micrographs. In the C 1s‐NEXAFS of metal‐loaded polyacrylic acid (PAA), used as a HA model compound, a distinct complexation effect is identified. This effect is similar to trends observed in the dense fraction of HA/metal cation aggregates. The strongest complexation effect is observed for the Zr(IV)–HA/PAA system. This effect is confirmed by quantum chemical calculations performed at the ab initio level for model complexes with different metal centres and complex geometries. Without the high spatial resolution of STXM and LSLM and without the combination of molecular modelling with experimental results, the different zones indicating a `pseudo'‐phase separation into strong complexing domains and weaker complexing domains of HA would never have been identified. This type of strategy can be used to study metal interaction with other organic material.     

A reaction cell with sample laser heating for in situ soft X‐ray absorption spectroscopy studies under environmental conditions

A miniature (1 ml volume) reaction cell with transparent X‐ray windows and laser heating of the sample has been designed to conduct X‐ray absorption spectroscopy studies of materials in the presence of gases at atmospheric pressures. Heating by laser solves the problems associated with the presence of reactive gases interacting with hot filaments used in resistive heating methods. It also facilitates collection of a small total electron yield signal by eliminating interference with heating current leakage and ground loops. The excellent operation of the cell is demonstrated with examples of CO and H₂ Fischer–Tropsch reactions on Co nanoparticles.