Elastomer swelling and Hansen solubility parameters

The prediction of how much an elastomer swells in contact with a given solvent is important in many industrial processes. In this article, Hansen solubility parameters (HSP) of two EPDM elastomers and one FKM elastomer were determined before vulcanisation by correlating solubility in those solvents that fully dissolved the polymers. These values were then used to generate plots of solvent swelling after the same elastomers were vulcanised. HSP correlations were also established for the same vulcanised elastomers at different levels of swelling. This makes its possible to predict the swelling of the elastomers studied in contact with many untested solvents.     

Hildebrand and Hansen solubility parameters from molecular dynamics with applications to electronic nose polymer sensors

We introduce the Cohesive Energy Density (CED) method, a multiple sampling Molecular Dynamics computer simulation procedure that may offer higher consistency in the estimation of Hildebrand and Hansen solubility parameters. The use of a multiple sampling technique, combined with a simple but consistent molecular force field and quantum mechanically determined atomic charges, allows for the precise determination of solubility parameters in a systematic way (sigma = 0.4 hildebrands). The CED method yields first-principles Hildebrand parameter predictions in good agreement with experiment [root-mean-square (rms) = 1.1 hildebrands]. We apply the CED method to model the Caltech electronic nose, an array of 20 polymer sensors. Sensors are built with conducting leads connected through thin-film polymers loaded with carbon black. Odorant detection relies on a change in electric resistivity of the polymer film as function of the amount of swelling caused by the odorant compound. The amount of swelling depends upon the chemical composition of the polymer and the odorant molecule. The pattern is unique, and unambiguously identifies the compound. Experimentally determined changes in relative resistivity of seven polymer sensors upon exposure to 24 solvent vapors were modeled with the CED estimated Hansen solubility components. Predictions of polymer sensor responses result in Pearson R2 coefficients between 0.82 and 0.99.     

反气相色谱法与Hansen溶解度参数法测定聚乙烯醇溶解度参数及相关热力学性质

采用反气相色谱（IGC）法,以聚乙烯醇（PVA）为固定相,脂肪族、芳香族、醇、酮及卤代烃5类18种化合物为探针分子,研究PVA的溶解性质并获得了PVA在383.15～423.15 K范围内的溶解度参数（δ₂）及相关热力学性质,并与Hansen溶解度参数法（HSP）测得的溶解度参数（δ_T）进行比较。结果表明,5类溶剂对PVA溶解能力的趋势为酮类 >醇类 >卤代烃、芳香类、脂肪族类>脂环族,卤代烃、芳香类和脂肪族类溶剂的溶解能力相似;在测试温度范围内PVA的δ₂随温度升高而增加;采用IGC法外推出室温（298.15 K）下PVA的δ₂为27.69 （J/cm³）^0.5,与HSP法测得室温下PVA的δ_T（27.77 （J/cm³）^0.5）一致。PVA溶解度参数及相关热力学参数的研究为其应用及相关研究提供了定量依据。     

Role of Hansen solubility parameters in solid phase extraction

The sorbent–eluent systems combined from eight polymeric sorbents and seven solvents as eluents were used for the extraction of phenol and its oxidation products from water samples. The individual interactions between sorbents, eluents and analytes were characterized by Hansen solubility parameters. Principal components analysis (PCA) was used for revealing the dominant interactions (dispersive, polar, and hydrogen bonding type) in sorbent–analyte–eluent systems. The importance of solubility parameters was also determined by a novel procedure based on sum of ranking differences (SRD). Although PCA and ranking by SRD are based on different principles and calculations, they have provided very similar results. The recovery in a given system has been predicted from the magnitudes of mutual interactions (sorbent–analyte, sorbent–eluent, analyte–eluent) by multiple linear regression.     

Experimental analysis and thermodynamic modelling of Nitroxynil solubility in pure solvent and binary solvent

Nitroxynil(NIT) is a commonly used anti-liver fluke drug for cattle and sheep, Its solubility is closely related to its preparation. In this work, the molar solubility of NIT in nine pure solvents (methanol, ethanol, 1,2-propanediolethyl, isopropanol, ethyl acetate, acetonitrile, n-butanol, phemethylol) and two kinds of binary mixtures with different ratio(ethanol + phemethylol; ethanol + acetonitrile) was determined by shake flask method over the temperature from 278.15 ～ 323.15 K at atmosphere pressure. Results show that the solubility of NIT in all tested solvents was increased with raised temperature. In mono-solvents, the mole fraction solubility of NIT was highest in phemethylol and the solubility order is: phemethylol > acetonitrile > ethyl acetate > methanol > n-butanol > ethanol > 1,2-propanediolethyl > isopropanol > water. In binary solvents, the mole fraction solubility increased with increasing ratio of phemethylol/acetonitrile. In mono-solvents, the modified Apelblat equation, λh equation, Van't Hoff model were applied to correlate the solubility data. In binary solvents, the modified Apelblat equation, λh equation, GSM model and Jouyban-Acree model were to correlate the solubility data. Solubility order of NIT in nine pure solvent and two binary solvent systems were analysed by using the Hansen solubility parameter (HSP). Activity coefficient was to access the solute–solvent molecular interactions. In addition, the dissolution of NIT is an endothermic and entropy-friendly process, since thermodynamic parameters such as enthalpy, entropy, and apparent standard Gibbs free energy are all greater than zero. The results will supply some essential data on recrystallization process, purification and formulation development of NIT in pharmaceutical applications.     

A new way to determine the three-dimensional solubility parameters of hydrogenated nitrile rubber and the predictive power

In order to understand the swelling behavior of hydrogenated nitrile rubber (HNBR) more fully, the total solubility parameters (δ_t) of HNBR (Therban 2568) were determined by equilibrium swelling tests. Then, the swelling responses were analysed by a computer program to determine the Hansen three-dimensional solubility parameter (HSP). The HSP values – determined from lightly cured rubber samples – were estimated as δ_d = 18.4 (J/cm³)^1/2, δ_p = 6.0 (J/cm³)^1/2, δ_h = 4.5 (J/cm³)^1/2 and δ_t = 19.9 (J/cm³)^1/2. The energy difference (Ra) between HNBR and solvents or solvent mixtures have been calculated by their HSP values and proven to be useful for predicting the swelling behaviour of HNBR. The swelling volume decreases with increasing Ra values. Using blended solvents, a clear correlation between Ra values and the rubber swelling response was established. Thus, it may be possible to use the Hansen three-dimensional solubility parameters to predict swelling phenomena of cured rubber articles in mixed fluids such as bio-fuels or lubricants. Also, the HSP values may be used to predict the response of rubber seals or gaskets when replacing toxic or expensive fluids with more favorable environmentally friendly or inexpensive ones.     

Solubility Determination,Hansen Solubility Parameters and Thermodynamic Evaluation of Thymoquinone in (Isopropanol + Water) Compositions

This article studies the solubility, Hansen solubility parameters (HSPs), and thermodynamic behavior of a naturally-derived bioactive thymoquinone (TQ) in different binary combinations of isopropanol (IPA) and water (H₂O). The mole fraction solubilities (x₃) of TQ in various (IPA + H₂O) compositions are measured at 298.2–318.2 K and 0.1 MPa. The HSPs of TQ, neat IPA, neat H₂O, and binary (IPA + H₂O) compositions free of TQ are also determined. The x₃ data of TQ are regressed by van’t Hoff, Apelblat, Yalkowsky–Roseman, Buchowski–Ksiazczak λh, Jouyban–Acree, and Jouyban–Acree–van’t Hoff models. The maximum and minimum x₃ values of TQ are recorded in neat IPA (7.63 × 10⁻² at 318.2 K) and neat H₂O (8.25 × 10⁻⁵ at 298.2 K), respectively. The solubility of TQ is recorded as increasing with the rise in temperature and IPA mass fraction in all (IPA + H₂O) mixtures, including pure IPA and pure H₂O. The HSP of TQ is similar to that of pure IPA, suggesting the great potential of IPA in TQ solubilization. The maximum molecular solute-solvent interactions are found in TQ-IPA compared to TQ-H₂O. A thermodynamic study indicates an endothermic and entropy-driven dissolution of TQ in all (IPA + H₂O) mixtures, including pure IPA and pure H₂O.     

Hansen solubility parameters for assay method optimization of simvastatin,ramipril, atenolol,hydrochlorothiazide and aspirin in human plasma using liquid chromatography with tandem mass spectrometry

A simple, specific, sensitive, validated method was developed using liquid chromatography with tandem mass spectrometry with electrospray ionization of human plasma for the simultaneous estimation of drugs (simvastatin, ramipril, atenolol, hydrochlorothiazide, and aspirin) of Polycap^TM capsule used in cardiovascular therapy. The interaction of these actives including internal standards between the stationary and mobile phase were investigated using Hansen solubility parameters. Chromatographic separation was performed on Phenomenex Synergi Polar‐RP (30 × 2 mm, 4 μm) column with a gradient mobile phase composition of acetonitrile and 5 mM ammonium formate for positive mode and 0.1% formic acid in both water and acetonitrile for negative mode. The flow rate and runtime were 1.0 mL/min and 3.5 min, respectively. Sample extraction was done by protein precipitation using acetonitrile, enabling a fast analysis. The calibration ranges from 0.1 to 100, 0.1 to 100, and 1 to 1000 ng/mL for simvastatin, ramipril, and atenolol using internal standard carbamazepine in positive mode, respectively, whereas it was 0.3–300 and 2–2000 ng/mL for hydrochlorothiazide and aspirin using internal standard 7‐hydroxy coumarin in negative mode, respectively. Hansen solubility parameters can be used as a high‐throughput optimizing tool for column and mobile phase selection in bioanalysis. This validated bioanalytical method has the potential for future fixed dose combination based preclinical and clinical studies that can save analysis time.     

Molecular solubility and hansen solubility parameters for the analysis of phase separation in bulk heterojunctions

Although the fabrication procedures for bulk heterojunction (BHJ) solar cells are routinely optimized to accommodate new organic materials, the influence of solvent properties and cohesive forces on the film‐forming process and the self‐assembly of donor and acceptor molecules on the nanoscale are poorly understood. In this study, we measure the solubility of a variety of organic semiconductors in a range of solvents and calculate cohesive forces including dispersion forces, dipole interactions, and hydrogen bonding via Hansen Solubility Parameters (HSPs). HSPs were calculated by measuring the solubilities of various organic semiconductors in 27 solvents and the influence of solvent identity on film morphology of different BHJ mixtures was explored via atomic force microscopy (AFM). The possibility of correlations between HSPs and film morphology was considered; however, it is apparent that the HSP values alone do not play a critical role in determining the morphology of the films of conjugated polymers and molecules. This collection of solubility data constitutes the first of its type for organic semiconducting materials, and may act as a useful reference for the organic semiconductor community to aid in the understanding and selection of solvents for donor–acceptor BHJ mixtures. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Equilibrium solubility of 6-propyl-2-thiouracil in nine pure solvents: Determination,correlation, Hansen solubility parameter and thermodynamic properties

Investigation upon the solid–liquid equilibrium on solubility data of 6-propyl-2-thiouracil (PLT) in pure organic solvents is essential for separation and purifying in industry process. In this work, PLT solubility in nine neat solvents was experimentally determined at 278.15 K–323.15 K under P = 0.1 MPa. These selected solvents were tetrahydrofuran(THF), acetone, acetonitrile,1-butanol,1-pentanol, 2-butanol, methyl acetate, ethyl acetate,1-propyl acetate, respectively. Experiment results showed that solubility was consistent with temperature and decreased according to the order: THF > acetone>1-butanol≈1-pentanol> 2-butanol > methyl acetate > ethyl acetate>1-propyl acetate > acetonitrile. Solvent effect and Hansen solubility parameter (HSP) were incited to explain dissolution rule on solute. Four thermodynamic models (modi?ed Apelblat model, Van't model, λh model and NRTL model) were adopted to correlate PLT solubility and provide good correlations on basis of RD, ARD and RMSD. In addition, thermodynamic properties (ΔH°, ΔS° and ΔG°) of PLT dissolution process in pure solvents were discussed and proved to be endothermic, entropically driven and non-spontaneous process.     

Effect of sulfonic group on solubility parameters and solubility behavior of poly(2,6‐dimethyl‐1,4‐phenylene oxide)

An investigation on the effect of sulfonic group on solubility parameters and solubility behavior of poly(2,6‐dimethyl‐1,4‐phenylene oxide) (PPO) is presented. Sulfonated PPO (SPPO) was prepared using chlorosulfonic acid as a sulfonating agent. The structure of SPPO was confirmed by FT‐IR, and the ion exchange capacity (IEC) of SPPO was accurately determined by conductometric titration and ¹H‐NMR. The three‐dimensional solubility parameters of SPPO defined by Hansen were estimated by group contribution, and this approach was used to obtain the three coordinates of a solubility parameter in terms of: a dispersion part δ_d, a polar part δ_p and a hydrogen bonding part δ_h. The theoretical predications of solubility behavior were characterized using “soluble sphere” in three‐dimensional space. The estimated results were in accordance with the solubility experiments in different solvents. Copyright © 2006 John Wiley & Sons, Ltd.     

Estimation of solubility and interaction parameters in binary liquid mixtures by reversed-flow gas chroamtography

Summary A new method, called reversed-flow gas chromatography, is presented for the measurement of the gaseous equilibrium concentrations of all the components under study, both in the pure state and in binary liquid mixtures. From the equilibrium concentrations, activities, activity coefficients and volume fraction activity coefficients were determined. Using various empirical equations relating activity with the molecular interactions between the components of a binary liquid mixture, the solubility parameters of ethanol, 1-propanol, acetone and methylethylketone in water were calculated. The total interaction parameters and the partial contributions of the dispersion, orientation and residue forces on the van der Waals attraction between the organic compounds and water were also computed. The variation of the interaction parameters with the composition of organic component in the binary mixture was investigated. The successful application of reversed-flow gas chromatography to the estimation of polymer solubility parameters is also reported. Finally, the solubility parameters found by the present method are compared with those determined by other techniques or calculated theoretically.     

Extraction of aroma compounds in blackcurrant buds by alternative solvents: Theoretical and experimental solubility study

This study was designed to evaluate the performance of nine alternative solvents (α-pinene, MeTHF, ethyl acetate, methyl acetate, ethyl lactate, butanol, isopropanol, ethanol and CO₂ supercritical fluid) for extracting aromas from blackcurrant buds (Ribes nigrum L) compared to that of n-hexane, commonly used. This study has been performed via experimentation and simulation using Hansen solubility methodology for the comprehension of the dissolving mechanism. Experimentally, the extracts were analysed to compare the solvents performance in terms of aroma compositions. The results indicated that an alternative solvent, i.e. MeTHF, could be the most promising one for n-hexane substitution with good yield and selectivity of aromas.     

反相气相色谱法测定高密度聚乙烯溶解度参数

采用反相气相色谱(IGC)技术测定了高密度聚乙烯(HDPE)在303.15～343.15 K温度范围内的溶解度参数(δ2)及相关指标。以正己烷(n-C6)、正庚烷(n-C7)、正辛烷(n-C8)、正壬烷(n-C9)、三氯甲烷(CHCl3)及乙酸乙酯(EtAc)作为探针分子溶剂,经计算获得了探针溶剂的比保留体积(V0g)、摩尔吸收焓(ΔHS1)、无限稀释摩尔混合焓(ΔH∞l)、摩尔蒸发焓(ΔHv)、无限稀释活度系数(Ω∞1)以及探针溶剂与HDPE的Flory-Huggins相互作用参数(χ∞1,2)等指标。结果表明,上述6种探针溶剂在测定温度范围内均为HDPE的不良溶剂。此外,还推导出了HDPE在室温(298.15 K)下的溶解度参数δ2为19.00 (J/cm3)0.5。     

反气相色谱测定非对称双阳离子型离子液体的溶解度参数

在343.15~363.15 K下采用反气相色谱法对实验室合成的3种非对称双阳离子型离子液体[PyC₅Pi]NTf₂]₂、[MpC₅Pi]NTf₂]₂和[PyC₆Pi]NTf₂]₂的溶解度参数进行了测定。以正辛烷、正癸烷、正十二烷、正十四烷和正十六烷作为探针溶剂,计算了在不同温度下探针溶剂在3种离子液体中的特性保留体积(V_g⁰)、摩尔吸收焓(ΔH₁^S)、无限稀释摩尔混合焓(ΔH_l^∞)、摩尔蒸发焓(ΔH_v)、无限稀释活度系数(Ω₁^∞)以及探针溶剂与3种离子液体的Flory-HuggirIs相互作用参数(χ₁₂^∞),得到了室温下3种离子液体的溶解度参数(δ₂)为28.52~32.66 (J·cm^-3)^1/2。分子结构中含有4-甲基吗啉比含有吡啶时溶解度参数更大。随着两个阳离子间连接基碳数的增加,溶解度参数增大。这一结果对研究离子液体的溶液性质和应用有指导作用。     

Extended solubility parameters and stationary phase selectivities of anino-, cyano- and diol-silica normal bonded-phase liquid chromatography columns

Summary Extended solubility parameters have been determined for aminopropyl, cyanopropyl and 1,2-dihydroxypropyl propyl ether (diol) normal bonded-phase HPLC columns. Parameters were calculated from both the retention data of solutes (partition model) and empirically determined solvent strengths (adsorption-displacement model). The use of solvent strengths to calculate solubility parameters for these silica-based bonded stationary phases appears to be superior, since this technique avoids many of the problems that arise from their inherent heterogeneity. Normalized solubility parameters were also used to position these columns on a stationary phase selectivity triangle. The amino and cyano phases appear in regions of the tringle expected based on the properties of the pure liquids, but an ether linkage in the diol apparently neutralizes some of the acidity expected from this phase.     

Polymer science applied to biological problems: Prediction of cytotoxic drug interactions with DNA

It is taken for granted in the polymer world that the fundamental thermodynamic insights of Hansen solubility parameters (HSP) can be used to predict solvent/chemical interactions with polymers. The same principles should apply equally to bio-molecules interacting with that key polymer, DNA. A necessary (but not sufficient) condition for a drug to be cytotoxic is that it penetrates cell walls and be (thermodynamically) compatible with the core of the DNA polymer. The HSP of 9 cytotoxic drugs conform well to the basic HSP principle that “like (cell walls, DNA) attracts like (all 9 drugs)”. A correlation is not proof. But at the very least, HSP offer a fecund methodology for making predictions not only of how single molecules might interact with biological polymers, but how mixtures of chemicals could be more potent than the individual components. It is predicted, for example, that alcohols would provide synergism with many chemicals with their mixtures having higher affinity for the DNA bases than the individual components.     

Intermolecular contact interactions and their temperature dependence

A model, based on inverse gas chromatography experiments, has been developed for intermolecular interaction and its temperature dependence. The model ascribes to each substance a four-component solubility parameter; the four components reflect the van der Waals, polar, electron donor, and electron acceptor interactive properties. Their values depend on temperature in the same manner as does the cohesive energy. The latter was found to depend only on the critical temperature, the acentric factor, and the reduced temperature. The model was used for evaluation of the solubility parameters from polymer-solvent interaction coefficients and their temperature dependence with high accuracy. For binary solventsolvent mixtures, the free energy of mixing and its temperature dependence, as well as enthalpy of mixing can be derived from this model with a good accuracy.     

Determination of pair interaction parameters for multicomponent polymer blends

Pair interaction parameters for multicomponent polymer blends were found to be determined by analyzing the sorption isotherms of common solvent.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2494–2496, November, 2004.